Coumarinyl aldehyde as a Michael acceptor type of colorimetric and fluorescent probe for cyanide in water

A simple aldehyde-functionalized coumarin (1) was utilized as a doubly activated Michael acceptor type of chemodosimeter for cyanide in water. The probe has shown a selective and sensitive response to the cyanide anion over other various anions through the Michael addition reaction of the cyanide to 1. When cyanide anions were added, the prominent color changes as well as fluorescence changes of 1 were observed so that millimolar concentrations of cyanides were detectable by the naked eye.     

Rapid colorimetric sensing of cyanide anion in aqueous media with a spiropyran derivative containing a dinitrophenolate moiety

A spiropyran derivative containing a dinitrophenolate moiety (2: 1′,3′,3′-trimethyl-6,8-dinitro-spiro-[2H-1-benzopyran-2,2′-indoline]) behaves as a receptor for selective detection of cyanide anion (CN⁻) in aqueous media. Compound 2, when dissolved in aqueous media, spontaneously produces the spirocycle-opened merocyanine (MC) form even in dark condition. The absorption band of the MC form decreases selectively upon addition of CN⁻, via a nucleophilic addition of CN⁻ to the spirocarbon of the MC form. The nucleophilic addition occurs very rapidly (within 1 min) and enables rapid and selective quantification of very low levels of CN⁻ (>0.8 μM) by an absorption analysis.     

Label-free aptamer-based colorimetric detection of mercury ions in aqueous media using unmodified gold nanoparticles as colorimetric probe

We report a simple and sensitive aptamer-based colorimetric detection of mercury ions (Hg²⁺) using unmodified gold nanoparticles as colorimetric probe. It is based on the fact that bare gold nanoparticles interact differently with short single-strand DNA and double-stranded DNA. The anti-Hg²⁺ aptamer is rich in thymine (T) and readily forms T–Hg²⁺–T configuration in the presence of Hg²⁺. By measuring color change or adsorption ratio, the bare gold nanoparticles can effectively differentiate the Hg²⁺-induced conformational change of the aptamer in the presence of a given salt with high concentration. The assay shows a linear response toward Hg²⁺ concentration through a five-decade range of 1 × 10⁻⁴ mol L⁻¹ to 1 × 10⁻⁹ mol L⁻¹. Even with the naked eye, we could identify micromolar Hg²⁺ concentrations within minutes. By using the spectrometric method, the detection limit was improved to the nanomolar range (0.6 nM). The assay shows excellent selectivity for Hg²⁺ over other metal cations including K⁺, Ba²⁺, Ni²⁺, Pb²⁺, Cu²⁺, Cd²⁺, Mg²⁺, Ca²⁺, Zn²⁺, Al³⁺, and Fe³⁺. The major advantages of this Hg²⁺ assay are its water-solubility, simplicity, low cost, visual colorimetry, and high sensitivity. This method provides a potentially useful tool for the Hg²⁺ detection.     

A colorimetric and fluorescent sensor for sequential detection of copper ion and cyanide

A simple cation sensor 1 ((E)-9-((2-hydroxynaphthalen-1-ylimino)methyl)-1,2,3,5,6,7-hexahydropyrido[3,2,1-ij]quinolin-8-ol) bearing both a julolidine moiety and a naphthol moiety was designed and synthesized as a colorimetric sensor for Cu²⁺. In methanol solution of 1, the presence of Cu²⁺ led to a distinct naked-eye color change from yellow to purple. The proposed sensing mechanism might be attributed to the decrease in internal charge transfer band. Moreover, the resulting 1–Cu²⁺ complex sensed cyanide in a fluorometric way via fluorescent changes. These results demonstrate a novel type of the sequential recognition of Cu²⁺ and CN⁻ using two different sensing methods, color change, and fluorescence.     

A selective,sensitive and label-free visual assay of fructose using anti-aggregation of gold nanoparticles as a colorimetric probe

A new convenient colorimetric sensor for fructose based on anti-aggregation of citrate-capped gold nanoparticles(Au NPs) is presented. 4-Mercaptophenylboronic acid(MPBA) induces the aggregation of Au NPs, leading to a color change from red to blue. Fructose as a potent competitor has strong affinity for MPBA and a borate ester is formed between MPBA and fructose. There is an obvious color change from blue to red with increasing the concentration of fructose. The anti-aggregation effect of fructose on Au NPs was seen by the naked eye and monitored by UV–vis spectra. Our results showed that the absorbance ratio(A_(519)/A_(640)) was linear with fructose concentration in the range of 0.032–0.96 μmol/L(R~2= 0.996), with a low detection limit of 0.01 μmol/L(S/N = 3). Notably, a highly selective recognition of fructose was shown against other monosaccharide and disaccharide(glucose, mannose, galactose,lactose and saccharose). With anti-aggregation assays higher selectivity is achievable. The results of this work provide a rapid method for evaluating the quantitative analysis of fructose in human plasma at physiologically meaningful concentrations and at neutral pH. The proposed procedure can be used as an efficient method for the precise and accurate determination of fructose.     

Selective spectrophotometric determination of TNT using a dicyclohexylamine-based colorimetric sensor

Because of the extremely heterogeneous distribution of explosives in contaminated soils, on-site colorimetric methods are efficient tools to assess the nature and extent of contamination. To meet the need for rapid and low-cost chemical sensing of explosive traces or residues in soil and post-blast debris, a colorimetric absorption-based sensor for trinitrotoluene (TNT) determination has been developed. The charge-transfer (CT) reagent (dicyclohexylamine, DCHA) is entrapped in a polyvinylchloride (PVC) polymer matrix plasticised with dioctylphtalate (DOP), and moulded into a transparent sensor membrane sliced into test strips capable of sensing TNT showing an absorption maximum at 530 nm when placed in a 1-mm spectrophotometer cell. The sensor gave a linear absorption response to 5-50 mg L⁻¹ TNT solutions in 30% aqueous acetone with limit of detection (LOD): 3 mg L⁻¹. The sensor is only affected by tetryl, but not by RDX, pentaerythritoltetranitrate (PETN), dinitrotoluene (DNT), and picric acid. The proposed method was statistically validated for TNT assay against high performance liquid chromatography (HPLC) using a standard sample of Comp B. The developed sensor was relatively resistant to air and water, was of low-cost and high specificity, gave a rapid and reproducible response, and was suitable for field use of TNT determination in both dry and humid soil and groundwater with a portable colorimeter.     

纯水与自来水中氰离子的比色检测

设计合成了水溶性比色传感器磺酸功能化的偶氮水杨醛吖嗪(S),其结构经由1H NMR,ESI-MS确证.S在纯水与自来水中对氰离子(CN-)具有专一选择性的比色检测能力,最低检出限分别为0.16和0.63 μmol/L.可逆的质子转移检测机制赋予S循环再利用的优势,借助于检测试纸,实现了 CN-可逆的比色检测.该工作为纯...     

A colorimetric squaraine-based probe and test paper for rapid naked eyes detection of copper ion (II)

A colorimetric probe N,N’-bis(2-methoxy-ethyl)-2,3,3-trimethyl-3H-squaraine (MOESQ) with H₂O solubility was synthesized to detect Cu²⁺. MOESQ exhibits good selectivity, high sensitivity and fast UV-Vis response toward Cu²⁺ over other competing ions in CH₃CN. The detection limit of MOESQ for Cu²⁺ in CH₃CN can reach 1.88?×?10^?7?molL^?1. By adsorbing MOESQ on the chromatography paper, a colorimetric test paper for Cu²⁺ was prepared, which could detect Cu²⁺ with the color change from blue to faint yellow even in the limit of detection concentration of 10^?6?molL^?1.     

Doubly activated coumarin as a colorimetric and fluorescent chemodosimeter for cyanide

A new α,β-unsaturated nitro group and coumarin conjugate-based fluorescent chemodosimeter 1 was developed for the selective detection of cyanide anions. The chemodosimeter has shown a selective and sensitive response to cyanide anions over other various anions through a nucleophilic aromatic substitution reaction of the cyanide to 1. When cyanide anions were added, the enhanced fluorescence intensity as well as the color changes of 1 was observed so that micromolar concentrations of cyanides were detectable by the naked eye.     

Development of a boron-dipyrromethene-Cu ensemble based colorimetric probe toward hydrogen sulfide in aqueous media

A boron-dipyrromethene-Cu²⁺ ensemble based colorimetric probe for detection of hydrogen sulfide in aqueous media is reported. Complex 1-Cu(II) is able to selectively sense hydrogen sulfide over other anions and thiols followed by the release of compound 1 to give a remarkable change of UV absorption in aqueous solution (HEPES (4-(2-hydroxyethyl)-1-piperazineethanesulfonic acid) buffer, 50 mM, pH 7.4, 5% DMSO).     

Selective determination of melamine in milk samples using 3-mercapto-1-propanesulfonate-modified gold nanoparticles as colorimetric probe

A novel and sensitive colorimetric method for determination of melamine in milk samples was developed by a 3-mercapto-1-propanesulfonate-modified gold nanoparticles (MPS-GNPs) probe. Melamine molecule has multiple -NH₂ groups. These functional groups can interact with MPS to form strong hydrogen bonding and induce the aggregation of the MPS-GNPs, resulting in a dramatic color change from red to blue. Therefore, the concentration of melamine in milk samples can be quantitatively detected by the naked eyes or a UV-vis spectrometer. Moreover, investigations have revealed that the sensitivity of the detection could be clearly improved by adding NaCl to the modified GNPs solution, which leads to a more rapid color change in the NaCl-optimized GNPs system. It is worth noting that the absorption ratio (A₆₅₀/A₅₂₀) of the modified GNPs in the NaCl-optimized system exhibited a linear correlation with melamine concentration and the limit of detection is 8 nM, well below the safety limit (1 ppm for infant formula in China).     

Development of a method for estimating an accurate equivalence point in nickel titration of cyanide ions

In a nickel titration of cyanide ions using murexide as indicator, an accurate equivalence point was determined by a non-linear least-squares curve-fitting for a titration curve. This method was developed to establish a standard solution for cyanide ions. In a curve-fitting procedure, a theoretical titration curve was calculated, assuming that nickel ion formed only a 1:4 Ni²⁺:CN⁻ complex with cyanide ions and formed only a 1:1 complex with murexide. Results of the curve-fitting were reasonable at any pH and any indicator concentration studied. The combined standard uncertainty for a concentration of a 1000 mg kg⁻¹ cyanide solution by this method was 0.079%.     

Selective colorimetric sensing of Cu using triazolyl monoazo derivative

Although the high sensitivity, high selectivity and fast response make emission (fluorescence) based technique as one of the most promising tool for developing the chemosensors for metal ions, the past few years have witnessed a demand for the absorption based chemosensors for paramagnetic heavy metal ions, especially Cu²⁺. Being paramagnetic, Cu²⁺ leads to the low signal outputs (“turn-off”) caused by decreased emission which may sometimes give false positive response, rendering the emission based technique less reliable for analytical purposes. Herein, we report synthesis and characterization of a hetarylazo derivative, characterized by a strong charge-transfer band which gets attenuated convincingly in the presence of Cu²⁺ leading to distinct naked-eye color change (yellow to purple), and to a lesser extent in the presence of Cd²⁺, Zn²⁺, Co²⁺, Pb²⁺, Fe²⁺, Ni²⁺, Fe³⁺ and Hg²⁺ for which the naked eye sensitivity was comparatively (w.r.t. Cu²⁺) much less. No response was observed for the other metal ions including Li⁺, Na⁺, K⁺, Mg²⁺, Ca²⁺, Ba²⁺, Mn²⁺, Ag⁺, Zn²⁺, Cd²⁺, Pb²⁺, and lanthanides Ce³⁺, La³⁺, Pr³⁺, Eu³⁺, Nd³⁺, Lu³⁺, Yb³⁺, Tb³⁺, Sm³⁺, Gd³⁺. The proposed sensing mechanism has been ascribed to the stabilization of LUMO after complexation with Cu²⁺ and a 1:1 stoichiometry has been deduced.     

Cyanine dye-based chromofluorescent probe for highly sensitive and selective detection of cyanide in water

Cyanine dye Cy5 was used to be a probe for highly selective detection of trace cyanide in water by using a convenient two-phase strategy. The detection limit of both the fluorescent and colorimetric assay for cyanide is below 1.9 μM, the maximal allowance level for drinking water set by the World Health Organization.     

Highly selective and sensitive paper-based colorimetric sensor using thiosulfate catalytic etching of silver nanoplates for trace determination of copper ions

A novel, highly selective and sensitive paper-based colorimetric sensor for trace determination of copper (Cu²⁺) ions was developed. The measurement is based on the catalytic etching of silver nanoplates (AgNPls) by thiosulfate (S₂O₃²⁻). Upon the addition of Cu²⁺ to the ammonium buffer at pH 11, the absorption peak intensity of AuNPls/S₂O₃²⁻ at 522 nm decreased and the pinkish violet AuNPls became clear in color as visible to the naked eye. This assay provides highly sensitive and selective detection of Cu²⁺ over other metal ions (K⁺, Cr³⁺, Cd²⁺, Zn²⁺, As³⁺, Mn²⁺, Co²⁺, Pb²⁺, Al³⁺, Ni²⁺, Fe³⁺, Mg²⁺, Hg²⁺ and Bi³⁺). A paper-based colorimetric sensor was then developed for the simple and rapid determination of Cu²⁺ using the catalytic etching of AgNPls. Under optimized conditions, the modified AgNPls coated at the test zone of the devices immediately changes in color in the presence of Cu²⁺. The limit of detection (LOD) was found to be 1.0 ng mL⁻¹ by visual detection. For semi-quantitative measurement with image processing, the method detected Cu²⁺ in the range of 0.5–200 ng mL⁻¹(R² = 0.9974) with an LOD of 0.3 ng mL⁻¹. The proposed method was successfully applied to detect Cu²⁺ in the wide range of real samples including water, food, and blood. The results were in good agreement according to a paired t-test with results from inductively coupled plasma-optical emission spectrometry (ICP-OES).     

Ratiometric fluorescent and colorimetric sensors for Cu based on 4,5-disubstituted-1,8-naphthalimide and sensing cyanide via Cu displacement approach

Two 4,5-disubstituted-1,8-naphthalimide derivatives 1 and 2 were synthesized as ratiometric fluorescent and colorimetric sensors for Cu²⁺, respectively. In 100% aqueous solutions of 1, the presence of Cu²⁺ induces a strong and increasing fluorescent emission centered at 478 nm at the expense of the fluorescent emission of 1 centered at 534 nm. Compound 2 senses Cu²⁺ by means of a colorimetric (primrose yellow to pink) method with a thorough quench in emission attributed to the deprotonation of the secondary amine conjugated to the naphthalimide fluorophore. 1-Cu²⁺ and 2-Cu²⁺ sense cyanide in ratiometric way via colorimetric and fluorescent changes.     

A new colorimetric and fluorescent bifunctional probe for Cu and F ions based on perylene bisimide derivatives

A perylene bisimide derivative (PBI) based colorimetric and fluorescent bifunctional probe PAM-PBI was designed and synthesized. It was highly selective and sensitive for distinguishing both Cu²⁺ and F⁻ from other ions through a conspicuous change of UV–vis and fluorescence spectra. The recognition of Cu²⁺ by PAM-PBI showed an obvious color change from rose red to purple in aqueous solution, while the sensing of F⁻ gave a marked color change from rose red to light green in THF.     

A ratiometric chemodosimeter for highly selective naked-eye and fluorogenic detection of cyanide

A simple indole-based chemosensor (1) with a very low molecular weight of 207 g mol⁻¹ has been synthesized for the highly reactive and selective detection of CN⁻ in aqueous media, even in the presence of other anions, such as F⁻, Cl⁻, Br⁻, AcO⁻, S₂⁻${{\mathrm{S}}_2}^{-}$, SCN⁻, NO₂⁻${{\text{NO}}_2}^{-}$, NO₃⁻${{\text{NO}}_3}^{-}$, CO₃⁻${{\text{CO}}_3}^{-}$, BzO⁻, H₂PO₄⁻${{\mathrm{H}}_2{\text{PO}}_4}^{-}$, and HSO₄⁻${{\text{HSO}}_4}^{-}$. The sensor achieves rapid detection of cyanide anion in 2 min, and the pseudo-first-order rate constant is estimated as 1.576 min⁻¹. The colorimetric and ratiometric fluorescent response of the sensor to CN⁻ is attributable to the addition of CN⁻ to the electron-deficient dicyanovinyl group of 1, which prevents intramolecular charge transfer. The sensing mechanism is supported by density functional theory and time-dependent density functional theory calculations. Moreover, sensor 1 exhibits both high accuracy in determining the concentration of CN⁻ in real samples and 1-based test strips can conveniently detect CN⁻ without any additional equipment. The detection limit of the sensor 1 (1.1 μM) for cyanide is lower than the maximum permissible level of CN⁻ (1.9 μM) in drinking water.     

Continuous monitoring for cyanide in waste water with a galvanic hydrogen cyanide sensor using a purge system

A continuous monitoring system for cyanide with a galvanic hydrogen cyanide sensor and an aeration pump for purging was developed. Hydrogen cyanide evolved from cyanide solution using a purging pump was measured with the hydrogen cyanide sensor. The system showed good performance in terms of stability and selectivity. A linear calibration curve was obtained in the concentrating range from 0 to 15 mg dm³ of cyanide ion with a slope of −0.24 μA mg⁻¹ dm⁻³. The lower detection limit was 0.1 mg dm⁻³. The 90% response time of the sensor system was within 3.5 min for a 0.5 mg dm⁻³ cyanide solution, when the flow rate of the purging air was 1 dm³ min⁻¹. The system maintained the initial performance for 6 months in the field test. The developed galvanic sensor system was not subject to interference from sulfide and residual chlorine, compared with a potentiometric sensor system developed previously. The analytical results obtained by the present system were in good agreement with those obtained by the pyridine pyrazolone method. The correlation factor and regression line between both methods were 0.979 and Y=2.30×10⁻⁴+1.12X, respectively. This system was successfully applied for a continuous monitoring of cyanide ion in waste water.