Phosphasilaallenes >Si = C = P− and phosphagermaallenes >Ge = C = P−

Phosphasilaallene Tip(Ph)Si = C = PMes* (Tip = 2,4,6-triisopropylphenyl, Mes* = 2,4,6-tri-tert-butylphenyl) and phosphagermaallene Mes₂Ge = C = PMes* (Mes = 2,4,6-trimethylphenyl) have been obtained by dehalogenation of their corresponding dihalophosphametallapropenes > E(X)-C(X′) = P? by tert-butyllithium. They dimerize above ?40 °C by a cycloaddition involving two E = C double bonds or the E = C and the P = C double bonds but can be characterized at low temperature by trapping reactions and by low field shifts in ³¹P, ²⁹Si and particularly ¹³C NMR for the sp carbon atom. Owing to a small increase in the steric hindrance, phosphagermaallene Tip(t-Bu)Ge = C = PMes* can be stabilized and isolated. The Ge = C double bond undergoes nearly quantitative [2 + 1] cycloadditions with chalcogens and [2 + 2] cycloadditions with aldehydes or ketones. The surprisingly stable lithiochlorosilane R(Cl₂)Si-C(Li) = PMes* (R = 9-methylfluorenyl) behaves as a synthetic equivalent of the phosphasilaallene R(Cl)Si = C = PMes*. With two alkyl groups (t-Bu) on the germanium atom, the phosphagermaallene t-Bu₂Ge = C = PMes* is not obtained but its formal dimers 1,3-digermacyclobutanes have been isolated.     

Synthesis,characterization and reactions of the transition metal halogenoalkyl carbocation complexes [Cp(CO)2M{η2-CH2CH(CH2)nX}]PF6 (n = 1–8, 10, M = Fe; n = 3, 4 M = Ru; X = Br,I)

The halogenoalkyl complexes [Cp(CO)₂M{(CH₂)_nX}] (n = 3–10, 12, M = Fe; n = 5, 6, M = Ru, X = Br, I) react with Ph₃CPF₆ in dry CH₂Cl₂ to give the corresponding carbocation complexes [Cp(CO)₂M{η²-(CH₂CH(CH₂)_n?2X}]PF₆ in high yields. NMR evidence indicates that the metals form metallacyclopropane type structures with the carbocation ligand. The reactions of some of the cationic complexes with NaI, PPh₃, Na[Cp(CO)₂Fe] and Et₃N are discussed. NaI and Na[Cp(CO)₂Fe] displace the halogeno-olefin, while PPh₃ adds at the β-CH^δ+ giving the unstable phosphonium adducts [Cp(CO)₂Fe{CH₂CH(PPh₃)(CH₂)_n?2X}]PF₆ which decompose to the halogeno-olefins and the cationic PPh₃ complex [Cp(CO)₂Fe(PPh₃)]⁺. Et₃N causes allylic deprotonation forming internal olefin complexes of the type [Cp(CO)₂Fe{CH₂CHCH(CH₂)_n?3X}]PF₆.     

Thermodynamics of formation of double salts M2SO4 · M′SO4 · 6H2O and M2SeO4 · M′SeO4 · 6H2O where M denotes Rb,or Cs and M′ denote Co,Ni, or Zn

This paper describes a chemical model that calculates (solid + liquid) equilibria in the (m₁Rb₂SO₄ + m₂CoSO₄)(aq), (m₁Rb₂SeO₄ + m₂CoSeO₄)(aq), (m₁Rb₂SO₄ + m₂NiSO₄)(aq), (m₁Rb₂SO₄ + m₂ZnSO₄)(aq), (m₁Rb₂SeO₄ + m₂ZnSeO₄)(aq), (m₁Cs₂SO₄ + m₂CoSO₄)(aq), (m₁Cs₂SeO₄ + m₂CoSeO₄)(aq), (m₁Cs₂SO₄ + m₂NiSO₄)(aq), (m₁Cs₂SeO₄ + m₂NiSeO₄)(aq), (m₁Cs₂SO₄ + m₂ZnSO₄)(aq), and (m₁Cs₂SeO₄ + m₂ZnSeO₄)(aq) systems, where m denotes molality at the temperature T=298.15 K. The Pitzer ion-interaction model has been used for thermodynamic analysis of the experimental osmotic and solubility data presented in the literature. The thermodynamic functions needed (binary and ternary parameters of ionic interaction, thermodynamic solubility products) have been calculated and the theoretical solubility isotherm has been plotted. The mixing parameters {θ(MN) and ψ(MNX)} have been chosen on the basis of the compositions of saturated ternary solutions and data on the binary solubility of the sulfate M₂SO₄. M^′SO₄ · 6H₂O double salts in water. To validate the mixing solutions model two different approaches have been used in evaluation of the ternary parameters: (I) preserving the same value of the binary mixing θ(MN) for the corresponding chloride, bromide, sulfate, and selenate systems with the same cations, and (II) with constant θ(MN) value (set equal to −0.05) for the all 11 sulfate and selenate systems. Very good agreement between experimentally determined and model predicted solubilities has been found. Important thermodynamic characteristics (thermodynamic solubility products, standard molar Gibbs free energy of formation) of the solid phases (simple salts, six sulfate – M₂SO₄ · M^′SO₄ · 6H₂O, and five selenate – M₂SeO₄ · M^′SeO₄ · 6H₂O – double salts) crystallizing in the systems under consideration are determined.     

Thermodynamic study of (alkyl esters + α,ω-alkyl dihalides) III. HmEandVmE for 20 binary mixtures {xCu − 1H2u − 1CO2C4H9 + (1 − x)α,ω-ClCH2(CH2)v − 2CH2Cl}, where u = 1 to 4, α = 1 and v = ω = 2 to 6

In this article, the experimental data of excess molar enthalpies $H_{\mathrm{m}}^{\mathrm{E}}$ and excess molar volumes $V_{\mathrm{m}}^{\mathrm{E}}$ are presented for a set of 20 binary mixtures comprised of the first four butyl alkanoates (methanoate to butanoate) and five α,ω-dichloroalkanes (1,2-dichloroethane to 1,6-dichlorohexane), obtained at atmospheric pressure and at a temperature of 298.15 K. The results indicate the existence of specific interactions between both kinds of compounds resulting in exothermic processes for most mixtures, except for those containing butyl methanoate which give rise to net endo/exothermic effects. The $V_{\mathrm{m}}^{\mathrm{E}}$ are positive for mixtures of (butyl esters + 1,2-dichloroethane or 1,3-dichloropropane) and negative for the remaining ones. The change in $H_{\mathrm{m}}^{\mathrm{E}}$ with the dichloroethane chain length for a same ester is regular although the $V_{\mathrm{m}}^{\mathrm{E}}$ presents an irregular variation. It can, therefore, be deuced from this that the mixing process involves both effects, exothermic/endothermic and expansion/contraction, simultaneously. The behaviour of the mixtures is interpreted on the basis of the results observed and attributed to different effects taking place among the molecules studied.To improve application of the UNIFAC model using the version of Dang and Tassios, average values were recalculated again for parameters of the ester/chloride interaction, distinguishing, during its application, the functional group of the acid part of the ester. In spite of this, the model does not adequately reproduce the systems’ behaviour.     

Electronic structure of lanthanum transition-metal oxyarsenides LaMAsO (M = Fe,Co, Ni) and LaFe1−xM′xAsO (M′ = Co,Ni) by X-ray photoelectron and absorption spectroscopy

The electronic structures of the quaternary oxyarsenides LaMAsO (M = Fe, Co, Ni) were examined with X-ray photoelectron spectroscopy (XPS) and X-ray absorption near-edge spectroscopy (XANES). Interpretation of the metal 2p_3/2 and arsenic 3d_5/2 binding energies, as well as a satellite feature in the Co 2p XPS spectrum, suggests charges that are much less extreme than expected (i.e., not M²⁺ and As^3?) because of the strong covalent character within the M–As bonds. As M is varied, the differing degrees of charge transfer from M to As atoms within these bonds are manifested by shifts in the As 3d_5/2 binding energies and changes in the As K-edge intensities. This charge transfer is isolated within the [MAs] layer and does not influence the O 1s and La 3d XPS spectra. Fitting the experimental valence band spectra of these oxyarsenides LaMAsO yielded electron populations of states that support the formal charge assignment [La³⁺O^2?][M²⁺As^3?]. The mixed-metal series LaFe_1?xM′_xAsO (M′ = Co, Ni) was examined by XANES; analysis of the metal K- and L-edges, as well as of the Co 2p XPS satellite feature, revealed that no metal–metal charge transfer takes place.     

Structural and magnetic properties of metal telluromolybdates MxM′1−xTeMoO6 (M,M′ = Mn,Co, Cd)

Synthesis, crystal structures and magnetic properties of metal telluromolybdates M_xM′_1?xTeMoO₆ (M, M′ = Mn, Co, Cd) have been investigated. Their crystal structures have two-dimensional arrays of M and M′ atoms. From the powder X-ray diffraction measurements, Mn_xCo_1?xTeMoO₆ adopt an orthorhombic structure throughout the composition range (x = 0.0–1.0). On the other hand, Mn_xCd_1?xTeMoO₆ and Co_xCd_1?xTeMoO₆ adopt two types of structures corresponding to their end members (orthorhombic for Mn- or Co-rich solid solutions; tetragonal for Cd-rich ones). In the intermediate compositions, it was found that two phases coexist with different metal components. Magnetic properties of these solid solutions were investigated. All the Mn_xCo_1?xTeMoO₆ exhibits an antiferromagnetic transition at ～23 K. The antiferromagnetic transition was also observed in Mn_xCd_1?xTeMoO₆ and Co_xCd_1?xTeMoO₆. However, the Néel temperature rapidly decreases with increasing the concentration of Cd and disappeared below x = 0.6, which is characteristic for two-dimensional magnetic system.     

Hyperconjugation versus back bonding in AH3−nXn species (A = Si and Ge; X = F,Cl and Br; and n = 1, 2 and 3)

In this research two competing phenomena, back bonding and hyperconjugation, have been investigated based on Natural Bond Orbital (NBO) and Atoms in Molecules (AIM) analyses for radical AH_3?nX_n species, where A = Si and Ge, and n = 1, 2 and 3. It is demonstrated in this article that both above phenomena will be occurred significantly, while back bonding is the only event in analogous compounds with carbon and hyperconjugation is rather negligible. It was also found that only one back bonding with the help of keyword $CHOOSE in NBO analysis can be found in this type of compounds with reasonable structure, while it can be sometimes detected in AH_3?nX_n without using keyword $CHOOSE. It is also shown that there is always an increase in bond length in comparison with reference molecules in mentioned species due to existing hyperconjugation, while if the central atom is carbon, we have always a decrease of bond length due to only having back bonding. Additionally, from AIM point of view, the delocalization indices for α-spin (majority spin) is more than β-spin (minority spin) in radical species for molecules without back bonding, while the situation in our compounds is quite reverse, which can be attributed to the π back bonding in the β-spin electrons.     

Crystal growth of inter-lanthanide LaLn′O3 (Ln′ = Y,Ho–Lu) perovskites from hydroxide fluxes

In this article, we report the growth of single crystals of the inter-lanthanide series LaLn′O₃ (Ln′ = Y, Ho–Lu) using molten hydroxide fluxes. Inter-lanthanide oxides, LnLn′O₃ (where Ln and Ln′ = lanthanides) typically crystallize in the A-, B- or C-Ln₂O₃ or in the ABO₃ perovskite structure types, depending on the relative sizes of the lanthanide cations involved. The inter-lanthanide oxides, LaLn′O₃ (Ln′ = Y, Ho–Lu), reported herein were determined to crystallize in the orthorhombic (Pnma) perovskite-type structure. A discussion on the effect of cation radii on the resultant crystal structure for LaLn′O₃ (Ln′ = Y, Ho–Lu) and other reported inter-lanthanide oxides is presented herein.     

Synthesis,characterization and thermochemistry of Cs(ASP) · nH2O (n = 0, 1)

New compounds of aspartic acid Cs(ASP) · nH₂O (n = 0, 1) have been synthesized and characterized by XRD, IR and Raman spectroscopy as well as TG. The structural formula of this new compound was Cs(ASP) · nH₂O (n = 0, 1). The enthalpy of solution of Cs(ASP) · nH₂O (n = 0, 1) in water were determined. With the incorporation of the standard molar enthalpies of formation of CsOH(aq) and ASP(s), the standard molar enthalpy of formation of −(1202.9 ± 0.2) kJ · mol⁻¹ of Cs(ASP) and −(1490.7 ± 0.2) kJ · mol⁻¹ of Cs(ASP) · H₂O were obtained.     

Separation of toluene and heptane by liquid–liquid extraction using z-methyl-N-butylpyridinium tetrafluoroborate isomers (z = 2, 3, or 4) at T = 313.2 K

The (liquid + liquid) equilibrium (LLE) data for three ternary systems containing heptane, toluene, and a z-methyl-N-butylpyridinium tetrafluoroborate ionic liquid ([zbmpy][BF₄] IL, where z = 2, 3, or 4) were determined at T = 313.2 K and atmospheric pressure. The effect of IL cation isomers on the LLE data was evaluated for the first time. The selectivity and extractive capacity from these LLE data were calculated and compared to those previously reported in the literature for the systems (heptane + toluene + [4bmpy][BF₄]) and (heptane + toluene + sulfolane). The results show that the LLE data for the systems comprising the ILs with the metha- and para-substituted cations do not differ significantly from isomer to isomer. On the other hand, significant differences were observed among the systems with the ortho-substituted cation and the other two cation isomers. The degree of consistency of the experimental LLE data was ascertained by applying the Othmer–Tobias correlation. In addition, the LLE data were satisfactorily correlated by means of the thermodynamic NRTL model.     

S = 1/2 Heisenberg antiferromagnetic spin chain [Cu(dmbpy)(H2O)2SO4] (dmbpy = 4,4′-dimethyl-2,2′-bipyridine): Synthesis,crystal structure and enhanced magnetocaloric effect

[Cu(dmbpy)(H₂O)₂SO₄] in the form of small blue crystals was prepared from the aqueous-ethanolic reaction mixture formed of CuSO₄ and dmbpy (dmbpy = 4,4′-dimethyl-2,2′-bipyridine). Its crystal structure consists of chains in which hexacoordinated Cu(II) atoms are linked by (μ₂-SO₄)²⁻ anions. The Cu(II) atom exhibits elongated tetragonal bipyramidal coordination with one chelate bonded dmbpy and two aqua ligands placed in the equatorial plane while the axial positions are occupied by bridging sulfato ligands. The study of electron spin resonance and specific heat enabled to identify the studied material as an S = 1/2 Heisenberg antiferromagnetic chain with weak intrachain exchange interaction, 2J/k_B = −1.12 K and a small anisotropy of g – factor, Δg/g ≈ 0.1. The analysis of the magnetic entropy revealed pronounced release of the entropy at the saturation magnetic field, which for spin chains induces quantum phase transition, namely B_sat = 1.56 T. The maximum isothermal change of the entropy ΔS_M = 2.86 J/Kmol is comparable to that released in a critical region for materials with magnetic phase transitions. The obtained results suggest that the existence of a quantum critical point significantly influences finite-temperature properties.     

Measurements of the critical parameters for {xNH3 + (1 − x)H2O} with x = (0.9098, 0.7757, 0.6808)

Measurements of the critical parameters for {xNH₃ + (1 ? x)H₂O} with x = (0.9098, 0.7757, 0.6808) were carried out by using a metal-bellows variable volumometer with an optical cell. The expanded uncertainties (k = 2) in temperature, pressure, density, and composition measurements have been estimated to be less than 3.2 mK, 3.2 kPa, 0.3 kg · m^?3, and 8.8 · 10^?4, respectively. In each mole fraction, the critical temperature T_c was first determined on the basis of the intensity of the critical opalescence. The critical pressure p_c and critical density ρ_c were then determined as the point at which the meniscus disappears on the isotherm at T = T_c. The expanded uncertainties (k = 2) in the present critical parameters have also been estimated. Comparisons of the present values with the literature data as well as the calculated values afforded using the equation of state are also presented.     

Interactions in (l-phenylalanine/l-histidine + 0.01 mol · kg−1 aqueous β-cyclodextrin) systems at T = (293.15, 298.15, 303.15 and 308.15) K

Densities (ρ) and speeds of sound (u) have been measured for (l-phenylalanine + 0.01 mol · kg⁻¹ aqueous β-cyclodextrin) and (l-histidine + 0.01 mol · kg⁻¹ aqueous β-cyclodextrin) systems at T = (293.15, 298.15, 303.15 and 308.15) K using the density and sound velocity Meter DSA 5000 M. The ρ and u values have been utilized to evaluate values of the partial molar volume (${\varphi }_v^{\circ }$), transfer partial molar volume (${\mathrm{\Delta }}_{\text{tr}}{\varphi }_v^{\circ }$), partial molar isentropic compressibility (${\varphi }_k^{\circ }$), and transfer partial molar isentropic compressibility (${\mathrm{\Delta }}_{\text{tr}}{\varphi }_k^{\circ }$) of the systems studied. The experimentally measured and calculated parameters have been interpreted in terms of host-guest and ion-hydrophilic interactions operative in the systems.