共查询到20条相似文献,搜索用时 93 毫秒
1.
基于表面增强拉曼光谱的重金属离子检测 总被引:1,自引:0,他引:1
以对巯基苯甲酸为拉曼标记和自组装修饰分子, 在光亮金基底上修饰后作为检测基底, 在金纳米粒子表面修饰后获得具有表面增强拉曼光谱信号的标记金溶胶. 修饰的基底及纳米离子通过重金属离子与羧基端的配位而发生相互作用, 最终形成“金属基底-对巯基苯甲酸/重金属离子/对巯基苯甲酸-金属纳米颗粒”的三明治结构. 采用扫描电镜表征纳米粒子的组装及以表面增强拉曼光谱检测表面标记分子的信号, 以此实现重金属离子的检测. 以强螯合剂EDTA溶液淋洗三明治结构, 使重金属离子与金属基底以及纳米颗粒上的羧基的配位作用断裂, 获得可再次利用的修饰金基底. 相似文献
2.
SERS标记的金纳米棒探针用于免疫检测 总被引:1,自引:0,他引:1
报道了基于金纳米棒表面增强拉曼散射(SERS)的免疫检测. 将拉曼活性分子对巯基苯甲酸吸附于金纳米棒表面, 制备出SERS标记的金纳米棒探针. 该探针和蛋白抗体结合形成SERS标记抗体. 通过SERS标记抗体、待测抗原和俘获抗体(固体基底上修饰的抗体, 即俘获抗体)之间的免疫应答反应, 将金纳米棒探针组装到固体基底上, 形成SERS标记抗体-抗原-俘获抗体 “三明治”夹心复合体. 待测抗原浓度越大, 固体基底上俘获的金纳米棒探针的数目越多, 从而可通过SERS信号的强弱来检测待测抗原的浓度. 由于金纳米棒的表面等离子体共振(SPR)峰位置可以在较宽的范围内调控, 可通过激发光和SPR的耦合来提高SERS信号, 从而提高免疫检测的灵敏度. 单组分抗原可检出的浓度范围高于1×10-8 mg/mL. 相似文献
3.
采用溶胶-凝胶法结合超分子模板技术, 以四乙氧基硅烷(TEOS)和3-氨丙基三乙氧基硅烷(APTES)作为反应前体, 以十六烷基三甲基溴化铵(CTMAB)为超分子模板, 简单快速地制备了一种新型氨基硅胶整体柱, 通过氨基将金纳米粒子组装在整体柱材料孔表面并用于表面增强拉曼散射(SERS)光谱分析. 以对巯基苯胺(PATP)和结晶紫(CV)为拉曼探针, 考察了金纳米粒子修饰的氨基硅胶整体柱用作SERS活性基底的性能. 结果表明, 该整体柱基底具有良好的SERS增强效应, 可检测到的PATP和CV的最低浓度分别为10-9和10-11 mol/L. 与金溶胶SERS基底相比, 本文制备的整体柱基底的检测灵敏度显著提高, 并具有良好的信号均一性, 是一种具有现场痕量检测应用潜力的SERS活性基底. 相似文献
4.
通过表面增强拉曼光谱(SERS)研究了标记分子4,4'-联吡啶在金溶胶上的吸附行为, 并将其与山羊抗小鼠IgG结合, 获得SERS标记免疫金溶胶. 在固相基底上组装抗体, 两者组装得到固相抗体-抗原-标记抗体“三明治”结构. 在单组分和双组分体系中借助抗体上标记金纳米粒子所带的SERS信号达到免疫检测的目的. 相似文献
5.
以对巯基苯甲酸、苯硫酚为标记分子,与金纳米粒子生成具有SERS信号的标记金溶胶.在一定条件下,标记金溶胶与抗体羊抗小鼠IgG形成SERS标记免疫金溶胶.用组装金纳米粒子的玻璃表面吸附抗体,通过对相应抗原小鼠IgG的识别,形成固相抗体/抗原对,再将SERS标记免疫金溶胶组装到固相抗体/抗原对上,形成“固相抗体-待测抗原-标记抗体(即标记免疫金溶胶)”夹心复合物,进而通过拉曼标记分子的SERS信号进行免疫检测. 相似文献
6.
7.
在水热条件下将纤维素纳米纤维(CNF)同时用作还原剂和稳定剂与氯金酸反应,制备了负载金纳米粒子(Au NPs)的纳米纤维素溶胶。采用真空抽滤的方法在微孔滤膜上一步沉积制备了金/纳米纤维素复合膜,复合膜中纤维束相互交错堆叠成多层三维结构,允许大量金纳米粒子在膜层中均匀分散。以罗丹明6G(R6G)和4-巯基吡啶(4-MPy)为探针分子对该复合膜的SERS性能进行了考察。结果显示,该SERS基底具有高的检测灵敏度和良好的光谱重复性,对R6G和4-MPy的检测限分别达到1×10-8mol/L和1×10-7 mol/L,相对标准偏差为7.8%。利用该复合膜对苯丙胺类毒品进行了分析和鉴定,其对甲基苯丙胺的检测浓度可低至1×10-7 mol/L,检测灵敏度明显优于实验室自制的两种三维结构的纤维柔性SERS基底。同时,将该SERS基底应用于毛发检材中痕量甲基苯丙胺的快速筛查,并采用气相色谱(GC)方法验证结果。结果显示,5份不同添加量的甲基苯丙胺的毛发样品均在1 000和1 030 cm-1出现甲基苯丙胺明显的特征... 相似文献
8.
采用易操作且低成本的静电自组装方法, 在质子化的玻璃基片上, 通过交替沉积氧化石墨烯(GO) 和带正电荷的银纳米粒子(AgNPs) 获得少数层GO和AgNPs复合薄膜(AgNPs/GO). 采用紫外-可见光吸收光谱、 原子力显微镜和扫描电子显微镜对复合薄膜的生长和表面形貌进行了表征. 结果表明, 通过调控AgNPs 溶胶浓度和自组装循环次数, 可以获得AgNPs/GO/AgNPs 的三明治结构, 并在基底表面形成均匀的AgNPs 聚集体. 表面增强拉曼散射(SERS)研究结果表明, AgNPs/GO-4基底具有最佳的SERS性能, 其对罗丹明6G(R6G) 和结晶紫的平均拉曼增强因子分别为3.4×108和1.3×109, 对R6G的最低检测浓度约为10-12 mol/L. 多层三明治结构和较小颗粒间距使得AgNPs层之间产生强烈的耦合作用, 并在GO片层间产生大量的“热点”, 显著提高SERS性能, 而少数层GO具有强吸附性, 有利于分子在基底中富集, 从而起到化学增强作用, 提高SERS灵敏度. 相似文献
9.
在PBS缓冲体系中, 金纳米粒子与三聚氰胺形成粒径较大的聚集体, 导致共振瑞利散射(RRS)强度显著增强, 在一定条件下, 散射强度(ΔIRRS)与三聚氰胺浓度成正比, 由此建立了以金纳米粒子作光谱探针检测鲜牛奶中三聚氰胺的新方法. 在优化的实验条件下, 当三聚氰胺的浓度为3.3×10-8~4.7×10-7 mol/L时, 其线性关系为: ΔI RRS=106.98C-28.279, R2=0.9971, 检出限为2.7×10-8 mol/L. 本方法金纳米粒子无需修饰, 在体系中仅加入一定量的单链寡聚核苷酸(T10), 实验表明该方法具有简便、快速、灵敏度高及选择性好等特点. 相似文献
10.
报道了空间稳定的表面增强拉曼散射(SERS)标记的金纳米棒探针在免疫检测方面的应用.该探针是将拉曼活性分子4-巯基苯甲酸和生物亲和性高分子α-巯基-ω-羧基聚乙二醇共吸附于金纳米棒表面而制得.其中,聚乙二醇高分子链为探针提供保护作用和空间稳定,使之可以耐受较苛性的条件;其端位的羧基与抗体等靶向实体结合,从而赋予探针检测识别功能.当探针检测待测抗原时(通过固体基底上的捕获抗体、待测抗原和探针上的抗体之间的特异性结合,形成经典“三明治”夹心结构),探针上4-巯基苯甲酸的SERS信号就能示踪出这种识别.该探针对单组分抗原的检出浓度能低至1×10-9mg·mL-1. 相似文献
11.
Preparation, Crystal Structures, Vibrational Spectra, and Normal Coordinate Analysis of four Linkage Isomeric Trichlorotrirhodanoosmates(IV) By treatment of fac-[OsCl3I3]2? with (SCN)2 in dichloromethane the linkage isomers fac-[OsCl3(NCS)3]2? ( 1 ), mer-[OsCl3(NCS)2c(SCN)]2? ( 2 ), mer-[OsCl3(NCS)(SCN)2t]2? ( 3 ), and mer-[OsCl3(NCS)(SCN)2c]2? ( 4 ) are formed which have been separated by ion exchange chromatography on diethylaminoethyl cellulose. X-Ray structure determinations have been performed on single crystals of fac-(Ph4As)2[OsCl3(NCS)3] (triclinic, space group P1 , a = 12.142(5), b = 13.233(5), c = 19.300(5) Å, α = 98.642(5)º, β = 100.509(5)º, γ = 112.514(5)º, Z = 2), mer-(Ph4As)2[OsCl3(NCS)2c (SCN)] · acetone (triclinic, space group P1 , a = 11.707(5), b = 13.238(5), c = 19.048(5) Å, α = 75.960(5)º, β = 88.981(5)º, γ = 69.999(5)º, Z = 2), mer-(Ph4As)2[OsCl3(NCS)(SCN)2 t] (triclinic, space group P1, a = 10.6861(12), b = 11.6587(5), c = 12.5232(5) Å, α = 112.069(8)º, β = 95.052(8)º, γ = 92.559(7)º, Z = 1) and mer-(Ph4As)2[OsCl3(NCS)(SCN)2 c] · 2acetone (triclinic, space group P1 , a = 11.444(5), b = 14.661(5), c = 15.830(5) Å, α = 75.790(5)º, β = 80.273(5)º, γ = 75.205(5)º, Z = 2). The complex anions are completely ordered. The via N or S coordinated thiocyanate groups are located nearly direct above one of the cis-positioned Cl ligands with Os? N? C angles of 169.1º, 171.5º, 175.7º ( 1 ), 175.6º, 178.6º ( 2 ), 172º ( 3 ), and 173.1º ( 4 ) and Os? S? C angles of 106.2º ( 2 ), 106.1º, 106.6º ( 3 ), 105.1º, and 108.2º ( 4 ). Using the molecular parameters of the X-Ray determinations the low temperature (10 K) IR and Raman spectra of the (n-Bu4N) salts of all four linkage isomers have been assigned by normal coordinate analyses based on a modified valence force field. The valence force constants are fd(OsN) = 1.71 ( 1 ), 1.46 and 1.62 ( 2 ), 1.69 ( 3 ), and 1.61 ( 4 ), fd(OsS) = 1.27 ( 2 ), 1.36 ( 3 ), 1.32, and 1.49 mdyn/Å ( 4 ). Taking into account increments of the trans influence a good agreement between observed and calculated frequencies is achieved. 相似文献
12.
Preparation, Crystal Structures, Vibrational Spectra, and Normal Coordinate Analysis of Four Linkage Isomeric Tetrachlorodirhodanoosmates(IV) By treatment of cis- or trans-[OsCl4I2]2? with (SCN)2 in dichloromethane the linkage isomers cis-[OsCl4(NCS)2]2? ( 1 ), trans-[OsCl4(NCS)(SCN)]2? ( 2 ), cis-[OsCl4(NCS)(SCN)]2? ( 3 ) and trans-[OsCl4(SCN)2]2? ( 4 ) are formed which have been separated by ion exchange chromatography on diethylaminoethyl cellulose. The X-Ray structure determinations on single crystals of cis-(Ph4As)2[OsCl4(NCS)2] (triclinic, space group P1 , a = 10.019(5), b = 11.702(5), c = 21.922(5) Å, α = 83.602(5)°, β = 85.718(5)°, γ = 73.300(5)°, Z = 2), trans-(Ph4As)2[OsCl4 · (NCS)(SCN)] (monoclinic, space group P21/c, a = 18.025(5), b = 11.445(5), c = 23.437(5) Å, β = 94.208(5)°, Z = 4), cis-(Ph4As)2[OsCl4(NCS)(SCN)] (triclinic, space group P1 , a = 10.579(5), b = 11.682(5), c = 22.557(5) Å, α = 81.073(5)°, β = 85.807(5)°, γ = 87.677(5)°, Z = 2) and trans-(Ph4As)2 · [OsCl4(SCN)2] (triclinic, space group P1 , a = 10.615(5), b = 11.691(5), c = 11.907(5) Å, α = 111.314(5)°, β = 96.718(5)°, γ = 91.446(5)°, Z = 1) reveal the complete ordering of the complex anions. The via N or S coordinated thiocyanate groups are located nearly direct above one of the cis-positioned Cl ligands with Os? N? C angles of 171.2° and 174.3° ( 1 ), 162.3° ( 2 ), 172° ( 3 ) and Os? S? C angles of 108.3° ( 2 ), 105.7° ( 3 ) and 105.5° ( 4 ). Using the molecular parameters of the X-Ray determinations the low temperature (10 K) IR and Raman spectra of the (n-Bu4N) salts of all four linkage isomers are assigned by normal coordinate analyses based on a modified valence force field. The valence force constants are fd(OsN) = 1.59 ( 1 ), 1.67 ( 2 ), 1.60 ( 3 ) and fd(OsS) = 1.27 ( 2 ), 1.31 ( 3 ) and 1.32 mdyn Å?1 ( 4 ). Taking into account increments of the trans influence a good agreement between observed and calculated frequencies is achieved. 相似文献
13.
Preparation and Crystal Structure of (n-Bu4N)3[Ir(NCS)(SCN)5] The evaporated ethanolic extrakt of the reaction product of K3[IrCl6] and HNO3, refluxed with an aqueous KSCN solution yields a mixture of the linkage isomers [Ir(NCS)n(SCN)6?-n]3?, n = 0? 2, and small amounts of linkage isomeric chloropentarhodanoiridates(III), from which [Ir(NCS)(SCN)5]3? has been isolated by ion exchange chromatography on DEAE-cellulose. The X-Ray structure determination on a single crystal of (n-Bu4N)3[Ir(NCS)(SCN)5] (monoclinic, space group P 21/a, a = 17.513(5), b = 32.607(5), c = 23.661(5) Å, β = 94.757(5)°, Z = 8) confirms the existance of a heteroleptic hexakis(thiocyanato(N)-thiocyanato(S))iridate(III) with an Ir? N distance of 2.03 Å and Ir? S bond lengths between 2.29 and 2.38 Å. The SCN groups with angles between 166 and 175° are nearly linear with Ir? S? C angles from 99.9 to 109.4°. The Ir? N? C angles of the two crystallographic independent anions are 166 and 174°. 相似文献
14.
Z. Y. Ren W. Y. Liu Y. M. Hou Y. Zhu L. K. Chang D. Z. Ma 《Journal of Thermal Analysis and Calorimetry》2001,63(1):153-160
Thermogravimetry (TG) was employed to study the thermal degradation kinetics of poly(etherketone/sulfone)ethylimide (PEK-IE and PES-IE). The corresponding decomposition activation energies and reaction orders were obtained and the comparison was made with their parent polymerspoly(ether-ketone/sulfone) with Cardo group (PEK-C and PES-C). The results show that the degradation activation energies of PEK-IE and PES-IE were lower than that of PEK-C and PES-C; and two stages of the degradation process were found for all the four polymers. For PEK-IE and PES-IE, the activation energies in the first decomposition stage are much lower than that in the second stage and the two stages can be taken as slow induction and fast degradation, whereas for PEK-C and PES-C the activation energies in the first decomposition stage are larger than that in the second stage, and the two stages can both be taken as two fast degradation stages. The decomposition mechanism of the two stages was also speculated.This revised version was published online in November 2005 with corrections to the Cover Date. 相似文献
15.
16.
《Journal of Coordination Chemistry》2012,65(1-2):173-182
Abstract The reaction, in water, of Co(II), Ni(II), Cu(II), Zn(II) and Cd(II) ions with sodium ampicillinate at room temperature has allowed isolation of dimers with the following general formula [M(amp)Cl]2 × nH2O (n = 1.5?3.2). The complexes were characterized by elemental analyses, conductivity measurements, magnetic susceptibilities and spectroscopic methods (IR, Raman, EPR and UV-Visible). A dinuclear structure based on octahedrally coordinated metal ions is proposed. 相似文献
17.
Summary: The thermal degradation behavior of poly(ε-caprolactone) (PCL) and poly(L-lactic acid) (PLA) have been studied in different environment. It was found that these polymers undergo completely different degradation processes in nitrogen and oxygen atmosphere. In oxygen environment PCL and PLA mainly decompose to CO2, CO, water and short-chain acids. In nitrogen atmosphere PCL releases 5-hexenioc acid, CO2, CO and ε-caprolactone, whereas PLA decomposes to acetaldehyde, CO2, CO and lactide. The polymer blends of poly(3-hydroxybutyrate) (PHB) with PCL and PLA decompose similar to the individual homopolymers with crotonic acid as the initial decomposition product of PHB. 相似文献
18.
In this paper, we carry out the calculation on the system (X@C60)(X=Li, Na, K, Kb, Cs; F, Cl, Br, I), where the position of X changes along 5 typical symmetry directions. For the calculation of quantum chemistry we use EHMO/ASED method, for the calculation of molecular mechanics we use Buckingham potential (exp-6-1) function, and for the calculation of thermo-chemical cycle we use individually isolating the processes such as the structure variation, charge transfer and charge distribution, and their interactions etc. The calculation results show that (1) In the region of radius r≈0.2 nm of the Ceo cage, the potential field is nearly spherical; (2) Except for Li and Na, the systems are the most stable with minimum energies at the center of C60 cage. For Li and Na, the systems are the most stable with minimum energies at r≈0.16 nm and r≈0.13 nm, respectively. In view of the interactive region of chemical bonds, the interactions between X and the C60 cage do not belong to the classical chemical bonds; ( 相似文献
19.
Cu以其优异的导电性、导热性和易加工性广泛用于工农业生产中.自然Cu的腐蚀和防腐成为人们很关注的问题.人们已经注意到,Cl-对Cu的腐蚀有影响,并进行过一些研究.但目前使用光电化学方法研究这一问题的文章尚不多见,特别是利用测量开路光电压及其瞬态波形这一现场的、无损的、灵敏的监测方法研究户对Cu电极腐蚀全过程的文章尚未见到.本文正是利用如上方法及XPS,AES方法,研究了Cl-对Cu电极腐蚀的全过程,取得了一些有意义的结果.1实验方法Cu电极用99.99%(质量分数)的Cu制成,面积约为39mm2;电极底部由Cu导线焊接引出,… 相似文献
20.
Sergey Chernyy Jyoti P. Mahalik Rajeev Kumar Jacob Judas Kain Kirkensgaard Matthias M. L. Arras Hyeyoung Kim Lars Schulte Sokol Ndoni Gregory S. Smith Kell Mortensen Bobby G. Sumpter Thomas P. Russell Kristoffer Almdal 《Journal of polymer science. Part A, Polymer chemistry》2018,56(22):1491-1504
Fundamental understanding of microphase separation in ABC miktoarm copolymers is vital to access a plethora of nonconventional morphologies. Miktoarm stars based on poly(cis 1,4-isoprene) (I), poly(styrene) (S), and poly(2-vinylpyridine) (V) are model systems, which allow systematic studies of the effects of composition, chemical microstructure, and temperature on the thermodynamics of microphase separation. Eleven ISV-x (I:S:V = 1:1:x, v:v:v) miktoarm copolymers were synthesized by anionic polymerization affording well-defined copolymers with a variable V arm. Equilibrium bulk morphologies of all samples, as evidenced by small-angle X-ray scattering, transmission electron microscopy (TEM), and self-consistent field theory, showed a systematic transition from lamellae (x ≈ 0–0.2) to [8.8.4] tiling (x ≈ 0.6–0.9) to cylinders in undulating lamellae (x ≈ 2–4) and, finally, to hexagonally packed core–shell cylinders (x ≈ 5–8). Chemical microstructure of the I arm [poly(cis 1,4-isoprene)] versus poly(3,4-isoprene) is shown to play important role in affecting morphological behavior. To reconcile differences between ISV-x star morphologies reported in the literature and those reported herein, even for the same composition, effects of the microstructure of I arm on the Flory–Huggins parameter between I and V arms were taken into account in a qualitative manner. © 2018 Wiley Periodicals, Inc. J. Polym. Sci., Part B: Polym. Phys. 2018 , 56, 1491–1504 相似文献