Unified model to predict self-assembly of nonionic surfactants in solution and adsorption on solid or fluid hydrophobic surfaces: effect of molecular structure

We have developed a pseudo-phase model to predict the self-assembly of nonionic surfactants on hydrophobic solid or fluid interfaces and in bulk solution. The uniqueness of this model is that it provides the relationship between molecular structure and self-assembly in solution and on interfaces. This model requires the input of minimal new experimental data. The remaining model parameters may be calculated on the basis of the surfactant molecular structure. The validity of the model has been established by comparing predictions with a wide array of experimental data for nonionic surfactant adsorption at the hydrophobic solid-water interface and at the air-water interface. The same model is then used to predict the self-assembly in bulk solution. The model predictions for critical aggregation concentration, aggregate shapes, and adsorption isotherms of various surfactants are in good agreement with the experimental data available in the literature.     

Interactions between benzyl benzoate and single- and double-chain quaternary ammonium surfactants

Interactions between benzyl benzoate and two different twin-tailed cationic surfactants have been studied. NMR diffusometry measurements have shown that cationic micelles grow in one dimension when benzyl benzoate is added. The location of benzyl benzoate in the micelles was evaluated by NOESY, showing that benzyl benzoate gave cross-peaks both to the hydrophobic groups in the surfactant and to the surfactant head group. Additions of benzyl benzoate to a lamellar phase of double-tailed quaternary surfactants revealed differences in responses. With an increasing concentration of benzyl benzoate, the structure of the dialkyl quat aggregate goes from lamellar to cubic, while the dialkyl ester quat forms a lamellar structure for all benzyl benzoate concentrations.     

Co-adsorption of carboxymethyl-cellulose and cationic surfactants at the air-water interface

We investigated the interaction between an anionic polyelectrolyte (carboxymethylcellulose) and cationic surfactants (DTAB, TTAB, and CTAB) at the air/water interface, using surface tension, ellipsometry, and Brewster angle microscopy techniques. At low surfactant concentration, a synergistic phenomenon is observed due to the co-adsorption of polyelectrolyte/surfactant complexes at the interface, which decreases the surface tension. When the surfactant critical aggregation concentration (cac) is reached, the adsorption saturates and the thickness of the adsorbed monolayer remains constant until another characteristic surfactant concentration, C0, is reached, at which all the polymer charges are bound to surfactant in bulk. Above C0, the absorbed monolayer becomes much thicker, suggesting adsorption of bulk aggregates, which have become more hydrophobic due to charge neutralization.     

Self-assembling of guanidine-type surfactant

Self-assembling characteristics of dodecylguanidine hydrochloride (C 12G), a cationic surfactant with a guanidine group in its molecule, were investigated and compared with those of dodecyltrimethylammonium chloride (DTAC) and sodium dodecylsulfate (SDS). Introduction of a guanidine group into the surfactant molecule was found to increase its assembly formability more than that of the trimethylammonium group on the basis of the experimental results on the phase diagram, Kraft point, area occupied per molecule at the air-water interface, and micellar aggregation number of C 12G. Thermodynamic parameters for micelle formation suggested that an attractive force acts between guanidine groups of C 12G molecules to facilitate their assembly formation. The presence of this force was evidenced by changes in the (1)H NMR and IR spectra before and after micelle formation of the guanidine-type (G-type) surfactant, indicating that the increased assembly formability is caused by an increase in hydrogen bonding between guanidine groups of the surfactant via water molecules.     

Polysaccharide/Surfactant complexes at the air-water interface - effect of the charge density on interfacial and foaming behaviors

The binding of a cationic surfactant (hexadecyltrimethylammonium bromide, CTAB) to a negatively charged natural polysaccharide (pectin) at air-solution interfaces was investigated on single interfaces and in foams, versus the linear charge densities of the polysaccharide. Besides classical methods to investigate polymer/surfactant systems, we applied, for the first time concerning these systems, the analogy between the small angle neutron scattering by foams and the neutron reflectivity of films to measure in situ film thicknesses of foams. CTAB/pectin foam films are much thicker than the pure surfactant foam film but similar for high- and low-charged pectin/CTAB systems despite the difference in structure of complexes at interfaces. The improvement of the foam properties of CTAB bound to pectin is shown to be directly related to the formation of pectin-CTAB complexes at the air-water interface. However, in opposition to surface activity, there is no specific behavior for the highly charged pectin: foam properties depend mainly upon the bulk charge concentration, while the interfacial behavior is mainly governed by the charge density of pectin. For the highly charged pectin, specific cooperative effects between neighboring charged sites along the chain are thought to be involved in the higher surface activity of pectin/CTAB complexes. A more general behavior can be obtained at lower charge density either by using a low-charged pectin or by neutralizing the highly charged pectin in decreasing pH.     

Interaction of dipicolinatodioxovanadium(V) with polyatomic cations and surfaces in reverse micelles

In confined media such as reverse micelles, molecular probes frequently reside at and interact strongly with the interface. If the interface is charged, it is often difficult to separate effects arising from interactions with the charged species from the effect of the interfacial environment. With reverse micelles as a model system, the work reported here explores the interaction of the charged surfactant headgroups at a self-assembled interface with the dipicolinatodioxovanadium(V) coordination complex. The vanadium complex studied in these experiments serves as an excellent probe to investigate how charged metal complexes interact with lipid interfaces. For comparison, measurements were also carried out probing the interaction of the vanadium complex with a model cationic headgroup, tetramethylammonium bromide. The impact of the environment is gauged by changes in the 51V chemical shift, longitudinal relaxation times, and 1H NMR pulsed field gradient measurements. These measurements suggest that while interface component parts, as modeled by the dispersed systems, interact with the vanadium complex, the interfacial environment perturbs the complex substantially more strongly than the sum of the components alone. Coulomb attraction dominates the interaction in all systems probed and surprisingly orients the hydrophobic portion into the bulk water.     

Comparison between inhomogeneous adsorption of charged surfactants on air-water and on solid-water interfaces by self-consistent field theory

We use a realistic molecular model to study the interfacial behavior of hydrocarbon sulfate surfactants within a self-consistent field model and consider the adsorption both at the air-water interface and at a hydrophobic solid-water interface. We focus on the structural properties of the hemimicelles at the critical interface aggregation concentration (CIAC) for the air-water system and the critical surface aggregation concentration (CSAC) for the solid-water system. The major difference between the two systems is that the liquid interface is penetrable but the solid surface is intrinsically impenetrable for the molecular species. At the LG interface the hemimicelles have a lens shape with their centers of mass positioned slightly toward the aqueous side and feature an aspect ratio of approximately 2, with the long dimension parallel to the interface. Hemimicelle formation occurs below a critical (interfacial) area per molecule and above a critical surface pressure depending on tail length and ionic strength. Hemimicelles are not expected at air-water interfaces for a surfactant with a tail length ( t) lower than 15 CH2 units. In contrast, at a hydrophobic solid the formation of laterally inhomogeneous micelles even takes place for surfactants with the tail length as short as t = 12. This difference is attributed to the screening of the lateral interactions in the vapor phase. The shape of surface hemimicelles is caplike (or half-lens) with an aspect ratio lower than 2 and the long dimension parallel to the solid surface. The tail length, the ionic strength, the adsorption energies, and the surfactant concentration have an effect on the surface micelle properties such as the aggregation number and size and shape.     

Mixing behavior of fluorinated and hydrogenated gemini surfactants at the air-water interface

Mixing behavior of hydrogenated and fluorinated cationic gemini surfactants was studied at the air-water interface by Brewster angle microscopy and pi-A isotherm curves. In the bulk, these two molecules did not mix and showed phase separation. At the air-water interface, if a monolayer was formed by separate deposition of the two solutions, they formed separate domains, and the compression occurred in two steps: first the domains with hydrogenated gemini surfactant were compressed until they showed collapse; then the domains with fluorinated gemini surfactant were compressed. If the two solutions were mixed before the deposition, they remained mixed upon compression; on the other hand, separate domains under separate deposition were shown to mix if the subphase was heated.     

Interaction between a novel gemini surfactant and cyclodextrin: NMR and surface tension studies

The interaction between cyclodextrins, hydroxypropyl-beta-cyclodextrin (HPbetaCD), and hydroxypropyl-gamma-cyclodextrin (HPgammaCD) and a novel type of nonionic surfactant synthesized from a fatty acid has been investigated. The so-called nonionic heterogemini surfactant (NIHG750) contains two hydrophobic groups and two hydrophilic groups, composed of one monomethyl ethylene glycol and one secondary OH group, CH(3)(CH(2))(7)-CH[OH]-CH[O(CH(2)CH(2)O)(16)CH(3)]-(CH(2))(7)CN. Surface tension studies indicate that micelles form in NIHG750 systems in both the presence and the absence of small quantities (molar ratio (HPbetaCD:NIHG750) approximately 2) of cyclodextrin (HPbetaCD or HPgammaCD). This gives NIHG surfactants an advantage compared to single-tailed nonionic surfactants, which generally lose their ability to micellize at much lower additions of cyclodextrins. However, the interaction between HPbetaCD and NIHG750 results in a disruption of the micellar aggregates at higher levels of cyclodextrin. In the dilute systems (C(NIHG750)<0.1% (w/w) approx) prolate-shaped mixed aggregates (HPbetaCD and NIHG750) form, with a short and a long axis of the order of 8-9 and 17-20 A, respectively. These gradually aggregate into micellar-like structures at higher concentrations. In the aqueous bulk phase HPbetaCD interacts mainly with the hydrophobic part of NIHG750, but both NMR and surface tension measurements indicate that an interaction with the hydrophilic part of NIHG750, as well, may exist. This interaction results in a better packing of NIHG750 at air-water interfaces. However, at elevated temperatures results from turbidity measurements indicate that NIHG750 and HPbetaCD interact mainly through the hydrophilic part of the surfactant; a decrease in the cloud point temperature is observed. The interaction of the larger cavity molecule, HPgammaCD, with NIHG750, on the other hand, seems to be relatively weak. The interaction, when present, most probably takes place through inclusion of the hydrophilic EO part of NIHG750. The results suggest that HPgammaCD in combination with NIHG750 is a better solubilizing system than with HPbetaCD.     

Studies on the interactions between anionic surfactants and polyvinylpyrrolidone: Surface tension measurement, 13C NMR and ESR

 The interaction between anionic surfactants and polyvinylpyrrolidone (PVP) are investigated using ¹³C NMR, ESR spectroscopy and surface tension measurements at the air/water interface. The behavior of single-chained surfactant, sodium dodecyl sulphonate (AS), is compared with that of the double-chained surfactant, sodium bis(2-ethylhexyl) phosphate (NaDEHP). The results showed that a surfactant–polymer complex of “necklace and head structure” is formed in AS aqueous solutions in the presence of PVP due to the hydrophobic interaction between PVP and AS. The AS micelles nucleate on the polymer hydrophobic sites, and the mobility of the AS head groups is not affected. But, for NaDEHP surfactant, it was found that PVP is little effective in influencing the monomer–micelle equilibrium and no surfactant– polymer complex formed in the NaDEHP aqueous solution. Received: 8 May 1996 Accepted: 14 August 1997     

Interfacial characterization of beta-lactoglobulin networks: displacement by bile salts

The competitive displacement of a model protein (beta-lactoglobulin) by bile salts from air-water and oil-water interfaces is investigated in vitro under model duodenal digestion conditions. The aim is to understand this process so that interfaces can be designed to control lipid digestion thus improving the nutritional impact of foods. Duodenal digestion has been simulated using a simplified biological system and the protein displacement process monitored by interfacial measurements and atomic force microscopy (AFM). First, the properties of beta-lactoglobulin adsorbed layers at the air-water and the olive oil-water interfaces were analyzed by interfacial tension techniques under physiological conditions (pH 7, 0.15 M NaCl, 10 mM CaCl2, 37 degrees C). The protein film had a lower dilatational modulus (hence formed a weaker network) at the olive oil-water interface compared to the air-water interface. Addition of bile salt (BS) severely decreased the dilatational modulus of the adsorbed beta-lactoglobulin film at both the air-water and olive oil-water interfaces. The data suggest that the bile salts penetrate into, weaken, and break up the interfacial beta-lactoglobulin networks. AFM images of the displacement of spread beta-lactoglobulin at the air-water and the olive oil-water interfaces suggest that displacement occurs via an orogenic mechanism and that the bile salts can almost completely displace the intact protein network under duodenal conditions. Although the bile salts are ionic, the ionic strength is sufficiently high to screen the charge allowing surfactant domain nucleation and growth to occur resulting in displacement. The morphology of the protein networks during displacement is different from those found when conventional surfactants were used, suggesting that the molecular structure of the surfactant is important for the displacement process. The studies also suggest that the nature of the oil phase is important in controlling protein unfolding and interaction at the interface. This in turn affects the strength of the protein network and the ability to resist displacement by surfactants.     

Interfacial rheology of mixed layers of food proteins and surfactants

Mixed protein–surfactant adsorption layers at liquid interfaces are described including the thermodynamic basis, the adsorption kinetics and the shear and dilational interfacial rheology. It is shown that due to the protrusion of hydrophobic protein parts into the oil phase the adsorption layers at the water–hexane interface are stronger anchored as compared to the water-air surface. Based on the different adsorption protocols, a sequential and a simultaneous scheme, the peculiarities of complexes between proteins and added surfactants are shown when formed in the solution bulk or at a liquid interface. The picture drawn from adsorption studies is supported by the findings of interfacial rheology.     

Gemini表面活性剂(12-6-12)和DNA的相互作用

应用紫外光谱、荧光探针、zeta 电位、动态光散射和凝胶电泳等方法探讨了阳离子gemini 表面活性剂C₁₂H₂₅N⁺(CH₃)₂―(CH₂)₆―(CH₃)₂N⁺C₁₂H₂₅·2Br^-(12-6-12)与DNA之间的相互作用. 研究结果表明, 与传统表面活性剂相比, 偶联表面活性剂特殊的分子结构使其与DNA的作用更强烈. DNA引导表面活性剂在其链周围形成类胶束结构, 开始形成类胶束时对应的表面活性剂临界聚集浓度(CAC)比纯表面活性剂临界胶束浓度(CMC)低两个数量级. CAC与DNA的浓度无关, 而与表面活性剂之间的疏水作用以及表面活性剂与DNA之间的静电吸引作用密切相关. Zeta 电位和凝胶电泳结果显示了DNA链所带负电荷逐渐被阳离子表面活性剂中和的过程. 借助原子力显微镜(AFM)成功观察到了松散的线团状DNA, 球状体随机地分散在DNA链上形成类似于串珠的结构、尺寸较大的球形复合物以及其由于吸附多余的表面活性剂重新带正电而被溶解得到的较小DNA/12-6-12聚集体. 圆二色(CD)光谱结果显示, 12-6-12可以诱导DNA的构象发生改变.     

Adsorption at the air/water interface in dodecylammonium chloride/sodium dodecyl sulfate mixtures

The composition and properties of the adsorption films of dodecylammonium chloride/sodium dodecyl sulfate at the air/water interface depend on interactions between the film molecules and equilibria in the bulk phase (monomer-micelle and/or monomerprecipitate equilibria).The negative value of surface molecular interaction parameter ^mon calculated using the regular solution theory indicates strong attractive interactions between adsorbed molecules. Electrostatic interactions between oppositely charged ionic head groups enhance the adsorption of surfactants and decrease the minimum molar area of surfactant molecules at the air/water interface. The addition of an oppositely charged surfactant enhances packing at the air/water interface and transition from a liquid expanded to a liquid condensed state. Surface potential measurements reveal positive values for the mixtures investigated, implying the cationic surfactant ions are closer to the surface than the anionic ones.     

Experimental observations on the scaling of adsorption isotherms for nonionic surfactants at a hydrophobic solid-water interface

The self-assembly of nonionic surfactants in bulk solution and on hydrophobic surfaces is driven by the same intermolecular interactions, yet their relationship is not clear. While there are abundant experimental and theoretical studies for self-assembly in bulk solution and at the air-water interface, there are only few systematic studies for hydrophobic solid-water interfaces. In this work, we have used optical reflectometry to measure adsorption isotherms of seven different nonionic alkyl polyethoxylate surfactants (CH3(CH2)I-1(OCH2CH2)JOH, referred to as CIEJ surfactants, with I = 10-14 and J = 3-8), on hydrophobic, chemically homogeneous self-assembled monolayers of octadecyltrichlorosilane. Systematic changes in the adsorption isotherms are observed for variations in the surfactant molecular structure. The maximum surface excess concentration decreases (and minimum area/molecule increases) with the square root of the number of ethoxylate units in the surfactant (J). The adsorption isotherms of all surfactants collapse onto the same curve when the bulk and surface excess concentrations are rescaled by the bulk critical aggregation concentration (CAC) and the maximum surface excess concentration. In an accompanying paper we compare these experimental results with the predictions of a unified model developed for self-assembly of nonionic surfactants in bulk solution and on interfaces.     

Effect of Molecular Weight on the Interfacial Dilational Viscoelasticity of Anionic Polyelectrolyte/Surfactant Systems

In this article, the effect of molecular weight on the interfacial tension and interfacial dilational viscoelasticity of polystyrene sulfonate/surfactant adsorption films at the water-octane interface have been studied by spinning drop method and oscillating barriers method respectively. The experimental results show that different interfacial behaviors can be observed in different type of polyelectrolyte/surfactant systems. PSS/cationic surfactant CTAB systems show the classical behavior of oppositely charged polyelectrolyte/surfactant systems and can be well explained by electrostatic interaction. Molecular weight of PSS plays a crucial role in the nature of adsorption film. The complex formed by CTAB and higher molecular weight PSS, which has larger dimension and stronger interaction, results in higher dilational modulus at lower surfactant bulk concentration. In the case of PSS/anionic surfactant SDS systems, the co-adsorption of PSS at interface through hydrophobic interaction with alkyl chain of SDS leads to the increase of interfacial tension and the decrease of dilational modulus at lower surfactant bulk concentration. For PSS/nonionic surfactant T × 100 systems, PSS may form a sublayer contiguous to the aqueous phase, which has little effect on interfacial tension but slightly decreases dilational modulus.     

Incompatibility and Phase Separation in a Bovine Serum Albumin/beta-Casein/Water Ternary Film at the Air-Water Interface

Thermodynamic incompatibility and two-dimensional phase separation in a bovine serum albumin (BSA)/beta-casein/water ternary film at the air-water interface has been studied using an epifluorescence microscopy technique. The incompatibility between BSA and beta-casein at the air-water interface was deduced from deviation of the experimental equilibrium composition of the proteins in the mixed saturated monolayer film from that predicted by the Langmuir-type competitive adsorption model at various bulk concentration ratios. Fluorescence microscopy of the mixed monolayer film showed distinct phase-separated BSA-rich and beta-casein-rich regions coexisting with inhomogeneous mixed regions. BSA always tended to be the dispersed phase and beta-casein the continuous phase. It is suggested that because the free energy at the "interfaces" between the phase-separated regions is generally higher than at other regions of the film, they may act as zones of instability in protein-stabilized foams and possibly emulsions. Copyright 2000 Academic Press.     

Forces between glass surfaces in mixed cationic-zwitterionic surfactant systems

We report atomic force microscopy (AFM) measurements of the forces between borosilicate glass solids in aqueous mixtures of cationic and zwitterionic surfactants. These forces are used to determine the adsorption of the surfactant as a function of the separation between the interfaces (proximal adsorption) through the application of a Maxwell relation. In the absence of cationic surfactant, the zwitterionic surfactant N-dodecyl-N,N-dimethyl-3-ammonio-1-propanesulfonate (DDAPS) undergoes little adsorption to glass at concentrations up to about 2/3 critical micelle concentration (cmc). In addition, DDAPS does not have much effect on the forces over the same concentration range. In contrast, the cationic surfactant dodecylpyridinium chloride (DPC) does adsorb to glass and does affect the force between glass surfaces at concentrations much lower than the cmc. In the presence of a small amount of DPC (0.05 mM = cmc/300), the net force between the glass surfaces is quite sensitive to the solution concentration of DDAPS. A model-independent thermodynamic argument is used to show that the surface excess of DDAPS depends on the separation between the glass interfaces when the cationic surfactant is present and that the surface excess of the cationic surfactant is more sensitive to interfacial separation in the presence of the zwitterionic surfactant. The change in adsorption of the zwitterionic surfactant is explained in terms of an intermolecular coupling between the long-range electrostatic force acting on the cationic surfactant and the short-range hydrophobic interaction between the alkyl chains on the cationic and zwitterionic surfactants. The adsorptions of cationic and zwitterionic surfactants in mixtures were measured independently and simultaneously by attenuated total internal reflection infrared spectroscopy (ATR-IR). The adsorption of the zwitterionic surfactant is enhanced by the presence of a small amount of cationic surfactant.     

Three distinct water structures at a zwitterionic lipid/water interface revealed by heterodyne-detected vibrational sum frequency generation

Lipid/water interfaces and associated interfacial water are vital for various biochemical reactions, but the molecular-level understanding of their property is very limited. We investigated the water structure at a zwitterionic lipid, phosphatidylcholine, monolayer/water interface using heterodyne-detected vibrational sum frequency generation spectroscopy. Isotopically diluted water was utilized in the experiments to minimize the effect of intra/intermolecular couplings. It was found that the OH stretch band in the Imχ((2)) spectrum of the phosphatidylcholine/water interface exhibits a characteristic double-peaked feature. To interpret this peculiar spectrum of the zwitterionic lipid/water interface, Imχ((2)) spectra of a zwitterionic surfactant/water interface and mixed lipid/water interfaces were measured. The Imχ((2)) spectrum of the zwitterionic surfactant/water interface clearly shows both positive and negative bands in the OH stretch region, revealing that multiple water structures exist at the interface. At the mixed lipid/water interfaces, while gradually varying the fraction of the anionic and cationic lipids, we observed a drastic change in the Imχ((2)) spectra in which spectral features similar to those of the anionic, zwitterionic, and cationic lipid/water interfaces appeared successively. These observations demonstrate that, when the positive and negative charges coexist at the interface, the H-down-oriented water structure and H-up-oriented water structure appear in the vicinity of the respective charged sites. In addition, it was found that a positive Imχ((2)) appears around 3600 cm(-1) for all the monolayer interfaces examined, indicating weakly interacting water species existing in the hydrophobic region of the monolayer at the interface. On the basis of these results, we concluded that the characteristic Imχ((2)) spectrum of the zwitterionic lipid/water interface arises from three different types of water existing at the interface: (1) the water associated with the negatively charged phosphate, which is strongly H-bonded and has a net H-up orientation, (2) the water around the positively charged choline, which forms weaker H-bonds and has a net H-down orientation, and (3) the water weakly interacting with the hydrophobic region of the lipid, which has a net H-up orientation.     

Synergistic interaction in emulsions stabilized by a mixture of silica nanoparticles and cationic surfactant

Using a range of complementary experiments, a detailed investigation into the behavior of dodecane-water emulsions stabilized by a mixture of silica nanoparticles and pure cationic surfactant has been made. Both emulsifiers prefer to stabilize o/w emulsions. At high pH, particles are ineffective emulsifiers, whereas surfactant-stabilized emulsions become increasingly stable to coalescence with concentration. In mixtures, no emulsion phase inversion occurs although synergism between the emulsifiers leads to enhanced stability at either fixed surfactant concentration or fixed particle concentration. Emulsions are most stable under conditions where particles have negligible charge and are most flocculated. Freeze fracture scanning electron microscopy confirms the presence of particle flocs at drop interfaces. At low pH, particles and surfactant are good emulsifiers alone. Synergism is also displayed in these mixtures, with the extent of creaming being minimum when particles are most flocculated. Experiments have been undertaken in order to offer an explanation for the latter synergy. By determining the adsorption isotherm of surfactant on particles in water, we show that surfactant addition initially leads to particle flocculation followed by re-dispersion. Using suitable contact angle measurements at oil-water-solid interfaces, we show that silica surfaces initially become increasingly hydrophobic upon surfactant addition, as well as surfactant adsorption lowering the oil-water interfacial tension. A competition exists between the influence of surfactant on the contact angle and the tension in the attachment energy of a particle to the interface.