Optical flowmeter using a modal interferometer based on a single nonadiabatic fiber taper

A novel in-fiber modal interferometer is presented that is based on a nonadiabatic biconical fused taper that couples light between the cladding and the core, combined with the Fresnel reflection at the fiber end. It is observed that the returned light from this fiber structure shows a channeled spectrum similar to that of a two-wave Michelson interferometer. The application of this device as a fiber optic flowmeter sensor is demonstrated.     

In-fiber integrated accelerometer

A compact in-fiber integrated fiber-optic Michelson interferometer based accelerometer is proposed and investigated. In the system, the sensing element consists of a twin-core fiber acting as a bending simple supported beam. By demodulating the optical phase shift, we obtain that the acceleration is proportional to the force applied on the central position of the twin-core fiber. A simple model has been established to calculate the sensitivity and resonant frequency. The experimental results show that such an accelerometer has a sensitivity of 0.09 rad/g at the resonant frequency of 680 Hz.     

High stability interleaved fiber Michelson interferometer for on-line precision displacement measurements

A self-reference fiber Michelson interferometer measurement system, which employs fiber Bragg gratings (FBGs) as in-fiber reflective mirrors and interleaves together two fiber Michelson interferometers that share the common-interferometric-optical path, is presented. One of the fiber interferometers is used to stabilise the system by the use of an electronic feedback loop to compensate the influences resulting from the environmental disturbances, while the other one is used to perform the measurement task. The influences resulting from the environmental disturbances have been eliminated by the compensating action of the electronic feedback loop, this makes the system suitable for on-line precision measurement. By means of the homodyne phase-tracking technique, the linearity of the measurement results of displacement measurements has been very high.     

Integrated fiber Michelson interferometer based on poled hollow twin-core fiber

We propose an integrated fiber Michelson interferometer based on a poled hollow twin-core fiber. The Michelson interferometer can be used as an electro-optic modulator by thermal poling one core of the twin-core fiber and introducing second-order nonlinearity in the fiber. The proposed fiber Michelson interferometer is experimentally demonstrated under driving voltages at the frequency range of 149 to 1000 Hz. The half-wave voltage of the poled fiber is 135 V, and the effective second-order nonlinear coefficient χ2 is 1.23 pm/V.     

基于光纤气泡和纤芯失配的Mach-Zehnder干涉液体折射率传感器

介绍了一种基于光纤气泡和纤芯失配的Mach-Zehnder干涉液体折射率传感器. 将两根纤芯经过腐蚀的普通单模光纤熔接在一起, 在熔接点处形成一个气泡, 在距气泡20 mm处级联一段20 mm的细芯光纤, 再接入一段单模光纤, 形成单模光纤-气泡-单模光纤-细芯光纤-单模光纤结构的传感器. 气泡与光纤芯径失配处的两个节点起到光纤耦合器的作用, 从而形成光纤Mach-Zehnder干涉仪. 环境液体折射率的变化,将使得传感器透射谱能量发生变化, 通过测量干涉谱波峰峰值能量从而实现对折射率的测量. 并对所制作传感器的折射率响应特性进行了实验研究, 实验结果表明干涉谱波峰峰值能量与环境液体折射率之间存在良好的线性关系, 当环境液体折射率变化范围在1.351–1.402时, 响应灵敏度为143.537 dB/RIU, 线性度0.996. 该传感器在生物化学领域有较好的应用前景. 关键词： 光纤气泡 纤芯失配 Mach-Zehnder干涉仪 折射率传感     

Optical refractometer based on an asymmetrical twin-core fiber Michelson interferometer

We report and demonstrate an optical refractometer based on a compact fiber Michelson interferometer. The Michelson interferometer is composed of an asymmetrical twin-core fiber containing a central core and a side core. By chemically etching a segment of the twin-core fiber until the side core is exposed, the effective index of the side core in the etched region is sensitive to the environmental refractive index, which leads to a shift of the transmission spectrum of the Michelson interferometer. The experimental results show that such a device has a refractive index resolution of more than 800 nm/refractive index unit in the range of 1.34-1.37.     

Multiplexed fiber Fabry-Perot temperature sensor system using white-light interferometry

A novel monitoring system for a fiber Fabry-Perot interferometer (FFPI) temperature sensor has yielded a resolution of 0.013 degrees C (0.0025 fringe). Light from a broadband source passes through a scanned Michelson interferometer and is reflected from a FFPI to produce a fringe pattern, the temporal position of which is proportional to a change in the optical length of the fiber interferometer. A second Michelson interferometer with a distributed-feedback laser source is used to correct for variations in the translation rate of the motor-driven scanning mirror. Coherence multiplexing of three such sensors has also been demonstrated.     

Erbium-doped CW and Q-switched fiber ring laser with fiber grating Michelson interferometer

The band-pass characteristic of fiber grating Michelson interferometer is analyzed, which acts as bothband-pass filter and Q-switch. An erbium-doped fiber ring laser based on fiber grating Michelsoninterferometer is implemented for producing single longitudinal mode CW operation with 5 MHz spectrallinewidth and up to 6 mW output power. In Q-switched operation, stable fiber laser output pulses withrepetition rate of 800 Hz, pulse width of 0.6 μs, average power of 1.8 mW and peak power of 3.4 W aredemonstrated. The peak power and average power of the Q-switched pulses are varied with the repetitionrate.     

Parallel demodulation system and signal-processing method for extrinsic Fabry-Perot interferometer and fiber Bragg grating sensors

A parallel demodulation system for extrinsic Fabry-Perot interferometer (EFPI) and fiber Bragg grating (FBG) sensors is presented that is based on a Michelson interferometer and combines the methods of low-coherence interference and Fourier transform spectrum. Signals from EFPI and FBG sensors are obtained simultaneously by scanning one arm of a Michelson interferometer, and an algorithm model is established to process the signals and retrieve both the wavelength of the FBG and the cavity length of the EFPI at the same time, which are then used to determine the strain and temperature.     

光纤法布里-珀罗干涉温度压力传感技术研究进展

光纤法布里-珀罗干涉温度和压力传感器具有灵敏度高、制作简单、成本低、体积小和抗电磁干扰能力强等优点,已被广泛应用于军事和民用领域.在某些环境恶劣,如具有强电磁干扰和腐蚀性,或提供给传感器的安装空间非常有限的特殊工业领域,微型光纤温度和压力传感器发挥着重要的作用,国内外诸多高校、科研院所都在对其进行研究.本文综述了光纤法布里-珀罗干涉仪的基本原理、制备技术、及其压力和温度传感应用的研究进展.详细介绍了湿法化学腐蚀制备法、电弧放电制备法、飞秒激光制备法、聚合物辅助制备法等常见光纤法布里-珀罗腔传感器的制作工艺,分析了不同制作工艺的优缺点;详细介绍了光纤法布里-珀罗干涉仪在温度传感、压力传感和温压一体传感领域的应用;最后对光纤法布里-珀罗干涉温度压力传感器的发展进行了总结和展望.     

All-solid multi-core fiber-based multipath Mach–Zehnder interferometer for temperature sensing

A novel multipath Mach–Zehnder interferometer (m-MZI) is proposed and experimentally demonstrated, which is fabricated by fusion splicing a segment of all-solid multi-core fiber (MCF) between two sections of single mode fiber-28 with a well-controlled lateral offset at the splice points. Beam propagation method-based simulation results demonstrated light passing throw MCF from multiple paths. Experiments with different lengths of MCF were implemented to investigate our proposed m-MZI’s response to temperature and strain. Compared with previously reported optical fiber modal interferometers, higher phase sensitivity can be obtained in our scheme due to the multipath interference configuration embedded in one fiber. A very high temperature sensitivity of 130.6 pm/°C has been achieved, and the maximum strain sensitivity is less than 0.284 pm/με in all experiments. A record low strain-to-temperature cross-sensitivity of 6.2 × 10^?4 °C/με has been realized, and it shows great significance of this in-fiber integrated multipath Mach–Zehnder interferometer in practical temperature sensing applications.     

光纤干涉仪臂差的测量

用白光干涉和Michelson干涉仪技术测量光纤Michelson干涉仪和Mach-Zehnder干涉仪的臂差.这种方法能在线测量任意长度的光纤干涉仪臂差,包括零臂差,测量的精度由光源的相干长度确定,为微米数量级.     

Switchable Multi-Wavelength Erbium-Doped Fiber Lasers based on a Mach-Zehnder Interferometer Using a Twin-Core Fiber

A switchable multi-wavelength erbium-doped fiber ring laser based on a compact in-fiber Mach-Zehnder interferometer comb filter at room temperature is presented. The comb filter is formed by splicing a section of twin-core fiber between two single mode fibers. By adjusting the states of the polarization controller appropriately, the laser can be made to operate in stable single-, dual- and three-wavelength lasing states. The operation principle is based on spectral hole burning induced by the saturated effect and polarization hole burning.     

基于薄芯光纤模态干涉技术的折射率 传感特性实验研究

报道了一种具有微结构缺陷的折射率传感器,并对其折射率特性进行了实验研究.将一部分薄芯光纤熔接于标准单模光纤中,由于插入的薄芯光纤和单模光纤纤芯失配,导致包层的高次模被激发并与纤芯模在单模光纤内形成干涉仪.通过减小薄芯光纤的包层直径,以增强包层中的传输模在环境中的倏逝场,从而提高对环境折射率测量的灵敏度.实验表明,该折射率传感器具有损耗低、成本低、灵敏度高和线性度好等特点.     

Performance of Polarizers and Coupler in an All Polarization Maintaining Fiber Interferometer

It is given mathematical models and analyze the performance of polarizers and coupler in an all polarization maintaining fiber (PMF) Michelson interferometer. The optical coherent signal to noise ratio (CSNR) of the interferometer is calculated by means of the Jones matrix with cross coupling matrix elements.     

基于薄芯光纤模态干涉技术的曲率光纤传感器

提出了一种新的基于薄芯光纤模态干涉技术的光纤曲率传感器。在单模光纤的中间部分插入薄芯光纤用于传感光路,没有插入薄芯光纤的单模光纤用于参考光路,以消除环境对曲率测量的影响。由于插入的薄芯光纤和单模光纤纤芯失配,导致包层的高次模被激发,并与纤芯模在单模光纤内形成干涉。当改变薄芯光纤的曲率时,沿纤芯和包层传播的模态和光纤长度会发生改变,使得干涉谷峰发生平移。将传感光纤的两端固定的平移台上,当调节平移台距离时,薄芯光纤的曲率发生改变,导致干涉谷峰向短波方向平移。通过观察谷峰的平移距离可以实现曲率的传感测量。实验表明,该装置具有低损耗、低成本和高灵敏度的特点。     

一种结构新颖波长间距可调谐的光纤激光器

提出一种获得波长间距可调谐稳定激光输出的新颖结构,即把非平衡Michelson干涉仪接入光纤激光器谐振腔内,同时利用压电陶瓷调节干涉仪光程差,在1562.24 nm 波段得到小于0.06 nm可调谐波长间距的多波长激光输出.     

Wavelength-selective all-fiber filter based on a single long-period fiber grating and a misaligned splicing point

A novel wavelength-selective all-fiber filter using a single long-period fiber grating (LPG) interacting with a misaligned fusion splicing point has been demonstrated. The misaligned splicing point couples a part of the core mode power into the cladding modes, which is then recoupled into the core mode by the following LPG. As an optical path difference is introduced by the differential refractive index of the fiber, an in-fiber Mach-Zehnder interferometer is therefore formed, which may function as a cost-efficient WDM filter with good isolation and low insertion loss.     

高双折射光纤中模式耦合空间分布的干涉测量法

本文应用干涉技术测量高双折射偏振保持光纤中模式耦合点的空间分布，测量系统由采用宽带来半导体激光器作为光源的调制迈克尔逊干涉仪组成，通过光程扫描方法探测沿高双折射光纤分布的模式的耦合点。     

用光纤迈克耳孙干涉仪测量折射率

对测量群折射率的白光干涉和光纤迈克耳孙(Michelson)干涉仪技术进行了改进.采用样吕夹片和样品与探测纤端面接触的方法,可以使群折射率的测量过程简单化.根据反射峰宽度的变化,可以调整样品反射界面与光纤的准直性,提高测量精度.