Experimental investigation of plume expansion dynamics of nanosecond laser ablated Al with small incident angle

Experimental study of expansion dynamics of pulsed-laser ablation plasmas from Al is presented. A systematic investigation of plasma plume expansion is done. The laser beam is focused on the target with an incident angle between 0° and 20°. The results show that the plume growth is almost normal to the target surface, irrespective of the incident angle of the laser. Besides, the time evolution of the plasma plume geometry ratio at different incident angles shows that the incident angle of laser beam influences very slightly its shape at later delay time. The results imply that when the incident angle is small (ranging from 0° to 20°), the influence of the incident angle on the plume expansion is rather trivial.     

Fabrication of superhydrophilic or superhydrophobic self-cleaning metal surfaces using picosecond laser pulses and chemical fluorination

Bioinspired superhydrophilic/phobic self-cleaning surfaces have recently drawn a lot of interest in both fundamental and applied research. A hybrid method to produce the self-cleaning property of micro/nanostructured surface using ultra-fast laser pulses followed by chemical fluorination is proposed. The typical micro/nanocomposite structures that form from microporous arrays and microgroove groups have been processed by picosecond laser on titanium alloy surface. The surface hydrophilic/phobic and self-cleaning properties of micro/nanostructures before and after fluorination with fluoroalkyl-silane were investigated using surface contact angle measurements. The results indicate that surface properties change from hydrophilic to hydrophobic after fluorination, and the micro/nanostructured surface with increased roughness contributes to the improvement of surface hydrophobicity. The micro/nanomodification can make the original hydrophilic titanium alloy surface more hydrophilic or superhydrophilic. It also can make an originally hydrophobic fluorinated titanium alloy surface more hydrophobic or superhydrophobic. The produced micro/nanostructured titanium alloy surfaces show excellent self-cleaning properties regardless of the fluorination treatment, although the fluorinated surfaces have slightly better self-cleaning properties. It is found that surface treatment using ultra-fast laser pulses and subsequent chemical fluorination is an effective way to manipulate surface wettability and obtain self-cleaning properties.     

SOI纳米光波导激光熔凝光整加工温度场的数值模拟及分析北大核心CSCD

激光表面熔凝技术可有效降低纳米光波导侧壁粗糙度进而减小光传输的散射损耗。为明确波导侧壁在KrF准分子激光表面熔凝过程的温度场演化规律,考虑材料参数随温度变化和相变潜热的影响,建立了纳米光波导侧壁激光熔凝的二维有限元数值模型,研究了熔池边界的推进行为与不同工艺参数的映射关系。结果表明:熔池形成于波导上表面与迎光侧壁夹角处;激光入射角度一定时,熔池熔深与平均能量密度正相关;熔池形貌受控于激光入射角度,随着入射角度的减小,熔池形貌由单边U形过渡为单边V形最终呈带钝角单边V形。分析表明,较大激光入射角对应的熔池形貌更有利于波导侧壁的光整加工;据此提出先确定激光入射角度以优化熔池形貌,再选取合适平均能量密度以获得足够熔化深度的工艺方法。     

利用棱镜减小自衍射信号光角色散的研究

自衍射效应在飞秒激光领域有非常重要的应用,如提高飞秒脉冲的时域对比度、作为自参考光谱干涉脉冲测量法的参考光、作为频率分辨光学开关法的信号光等.然而,具有较宽光谱带宽的飞秒激光在自衍射效应过程中产生的信号光存在明显的角色散,这给自衍射效应的应用带来不利影响.本文研究发现通过在自衍射效应的一个光路中加入等腰直角棱镜,当到棱镜的入射角为23fi时可以明显地减小飞秒激光脉冲自衍射信号的角色散.这就为以后将自衍射效应更好的应用到飞秒激光脉冲的研究提供了有用的参考.     

Intensity-Dependent Optical Nonlinear Absorption and Refraction of Gold Nanorods

Au nanorods dispersed in aqueous solution were prepared with the electrochemical method. The absorption spectrum shows two absorption peaks corresponding to the perpendicular and transverse surface plasma resonance absorption of the nanorods. The third-order optical nonlinear properties are investigated by Z-scans. The signs of the nonlinear absorption coemcient and refractive index are reversed as the intensity of incident laser increases, which is due to the shape change of the gold nanoparticles melted by the intense laser pulses.     

Azimuthal variations in the brightness of Fabry-Perot axicon fringes

According to Fresnel relations, the transmission through an inclined dielectric plate depends on the orientation of the light vector relative to the plane of incidence. Since an axicon has a conical surface, linearly polarized incident light has different transmissivity through different portions of the axicon. It is shown that the difference in transmissivity, as a function of azimuthal angle, increases with increasing values of the vertex angle of the axicon. This effect causes inhomogeneity in the brightness of Fabry-Perot fringes, and for a slightly misaligned system can distort the shape of the scanning spectral line.     

均匀等离子体光栅的色散特性研究

最近研究表明,两束交叉激光脉冲在等离子体中传播时,可以诱导生成周期等离子体密度调制(或称等离子体布拉格光栅). 分别利用传输矩阵法和耦合模理论,推导了激光斜入射时等离子体光栅的色散关系. 两种方法均表明,均匀等离子体光栅存在着光子带隙结构,并且在带隙附近有强烈的色散. 当激光斜入射时,带隙结构会呈现不同的偏振特性：S偏振光的带隙宽度随着入射角的增大而逐渐变宽,而P偏振光的带隙宽度随着入射角的增大先迅速变窄,在布儒斯特角入射时带隙消失,然后又随着入射角的增大而迅速变宽. 超宽的光子带隙和超高的激光损伤阈值,使得等离子体光栅有望成为一种新型的操纵强激光脉冲的光子器件. 关键词： 等离子体光栅 传输矩阵法 耦合模理论 光子带隙     

Femtosecond laser induced periodic large-scale surface structures on metals

The periodic ripple structures on wolfram and titanium surfaces are induced experimentally by linear polarized femtosecond laser pulses at small incident angles. The structural features show a material difference in the s- and p-polarized laser irradiation. The interspace between the ripples increases significantly for p-polarized laser irradiation when it exceeds a threshold angle, and the ripples' periodicities are larger than the wavelength of the incident p-polarized femtosecond laser; however, no significant change in the period of the ripples is observed with increasing incident angle for s-polarized laser irradiation. To explain these phenomena we propose a resonant absorption mechanism, by which the experimental observations can be interpreted.     

Formation of subwavelength periodic structures on tungsten induced by ultrashort laser pulses

The evolution of surface morphology of tungsten irradiated by single-beam femtosecond laser pulses is investigated. Ripplelike periodic structures have been observed. The period of these ripples does not show a simple relation to the wavelength and angle of incidence. The orientation of ripples is aligned perpendicularly to the direction of polarization for linearly polarized light. Surprisingly, we find that the alignment of the ripple structure turned left or right by 45 degrees with respect to the incident plane when using right and left circularly polarized light, respectively. The period of the ripple can be controlled by the pulse energy, the number of pulses, and the incident angle. We find a clear threshold for the formation as a function of pulse energy and number of pulses. The mechanism for the ripple formation is discussed, as well as potential applications in large-area structuring of metals.     

Femtosecond laser-induced formation of spikes on silicon

We find that silicon surfaces develop arrays of sharp conical spikes when irradiated with 500-fs laser pulses in SF₆. The height of the spikes decreases with increasing pulse duration or decreasing laser fluence, and scales nonlinearly with the average separation between spikes. The spikes have the same crystallographic orientation as bulk silicon and always point along the incident direction of laser pulses. The base of the spikes has an asymmetric shape and its orientation is determined by the laser polarization. Our data suggest that both laser ablation and laser-induced chemical etching of silicon are involved in the formation of the spikes. Received: 10 September 1999 / Accepted: 7 January 2000 / Published online: 8 March 2000     

圆柱体的空间圆锥光反射、折射与衍射

用准直或会聚激光束倾斜照射圆柱体时,其反射光、透射光(柱体透明时)、衍射光(柱体较细时)的叠加将形成以光束入射点为顶点的空间圆锥形光面(空间光锥),并且在垂直于柱体轴线方向的观察平面上投影成一圆形光环.空间光锥的形成与所选圆柱体材料及其粗细无关,只要其表面具有一定反射能力即可.空间光锥的锥角等于入射光束主光轴与圆柱体轴线夹角的2倍,与圆柱体和照射光束的直径大小及光波长无关.给出了对光纤及不同直径大小的玻璃和金属圆柱体的实验观察结果,并利用矢量图解法对其进行了详细地理论分析.进而得出,通常所谓单丝衍射图样,实际上是细丝的衍射和其表面的反射光场的叠加图样,对于透明细丝,还包括其透射光场的贡献.圆柱体的这种空间圆锥光反射和衍射原理有可能用于光束定位、成形、表面检测以及三维面形测量等 关键词： 圆柱体 空间光锥 投影光环     

Femtosecond laser-induced nanostructure-covered large-scale waves on metals

Through femtosecond (fs) laser pulse irradiation (pulse duration: 65 fs, central wavelength: 800 nm, and repetition rate: 250 Hz), we investigate the morphological evolution of fs laser-induced periodic surface structure on Au and Pt, called a nanostructure-covered large-scale wave (NC-LSW) with a period of tens of microns, densely covered by iterating stripe patterns of nanostructures and microstructures. We show that the surface morphology of NC-LSW crucially depends on the fluence of the laser, the number of irradiating pulses, and the incident beam angle. Our experimental observations allow us to establish a three-step model for the NC-LSW formation: the formation of laser-induced surface unevenness, inhomogeneous energy deposition due to the interference between the incident light and the scattered field, and nonuniform energy deposition due to shielding by the peaks of LSW.     

Desorption of metal atoms with laser light of different polarization

Laser-induced desorption of metal atoms from the surface of small metal particles has been investigated as a function of the shape of the particles and the polarization of the incident laser light. The particles were supported on LiF, quartz or sapphire substrates. In a first set of experiments, the shape of the particles was determined by recording optical transmission spectra with s- and p-polarized light incident under an angle of typically 40° with respect to the surface normal. The metal particles turn out to be oblate, the ratio of the axes perpendicular and parallel to the substrate surface being on the order of 0.5. This ratio decreases with increasing particle size. Also, the particles change shape if the temperature is raised. In further experiments, s- and p-polarized light has been used to stimulate desorption of atoms via surface plasmon excitation. It is found that the desorption rate markedly depends on the polarization of the light. This is explained by excitation of the collective electron oscillation along different axes of the non-spherical particles.     

Fabrication of three-dimensional microfluidic channels in glass by femtosecond pulses

Fabrication of three-dimensional microfluidic channels in glasses by water-assisted ablation with femtosecond laser pulses was investigated. The experimental results showed that formation of the photoinduced microchannels by femtosecond pulses depended on the incident laser power and the scanning speed. For the same scanning speed, the shape of cross-section of channels changed from ellipse to circle with increasing the laser power. Under the optimum condition of laser processing, we fabricated two layers of microfluidic channels with diameter of about 8 μm inside glass. The distance between two layers of microchannels was about 20 μm.     

超相对论激光和稠密等离子体作用产生阿秒脉冲的优化

利用一维粒子模拟程序研究了超相对论激光脉冲与稠密等离子体相互作用得到的阿秒脉冲.从超相对论近似的角度分析了电子运动行为和高次谐波的产生,发现当等离子体密度一定时,随着无量纲相似参数S的减小,阿秒脉冲的转换效率呈先增大后减小的趋势,因此选择适当的光强就可以得到转换效率较高的阿秒脉冲.当S一定时,随着等离子体密度的增加,阿秒脉冲转换效率有增大的趋势.这说明用适当的光强照射更稠密度的等离子体靶面,可以产生更强的阿秒脉冲.     

A study of photophysics using the Z-scan technique: lifetime determination for high-lying excited states

We report a novel method of determining the lifetimes of the high-lying excited singlet states of dye molecules in solution. The method is based on simulating the Z-scan technique with ground-state and excited-state absorptions of an incident laser pulse having Gaussian temporal and spatial distributions. This leads to the important finding that the use of laser pulses as long as tens of picoseconds can resolve subpicosecond lifetime.     

Femtosecond-laser nanofabrication onto silicon surface with near-field localization generated by plasmon polaritons in gold nanoparticles with oblique irradiation

Nanohole fabrication process with gold nanoparticles irradiated by femtosecond laser at different incident angles is investigated. Nanoparticles with diameter of 200 nm and laser irradiation with center wavelength of 800 nm are used in the present study. The analysis of the electromagnetic field distribution in the near-field zone of the particle is made by simulations based on finite-differential time domain (FDTD) method. It is shown that when gold nanoparticle is irradiated by laser pulse surface plasmon excitation can be induced, and associated with it, high-intensity near field is produced in a limited area around the particle. It is found that the change of the irradiation conditions by means of irradiation from various incident directions gives a possibility of laser nanoprocessing with tunable characteristics. Our results show that enhanced optical intensity is able to be induced on the substrate surface regardless of incident direction of the laser due to the image charge interaction with the substrate. Furthermore, the use of p-polarized laser irradiation at a certain angle gives a minimum of the spatial dimensions of the enhanced zone on the substrate which is about two times smaller than that obtained at normal incidence.     

Systematic study of highly efficient white light generation in transparent materials using intense femtosecond laser pulses

We report the results of a systematic study of white light generation in different high band-gap optical media (BaF₂, acrylic, water and BK-7 glass) using ultrashort (45 fs) laser pulses. We have investigated the influence of different parameters, such as focal position of the incident laser light within the medium, the polarization state of the incident laser radiation and the pulse duration of the incident laser beam on the white light generation. Our results indicate that for intense, ultrashort pulses, the position of physical focus inside the media is crucial in the generation, with high efficiency, of white light spectra over the wavelength range 400–1100 nm. Linearly polarized incident laser light generates white light with higher intensity in the blue region than circularly polarized light. Ultrashort (45 fs) pulses generate a flatter spectrum with higher white light conversion efficiency than longer (300 fs) pulses of the same laser power. We believe that a flat response over a wide range of wavelengths in the continuum may be efficiently compressed for generation of sub-10 fs pulses. PACS 52.38.Hb; 42.65.Jx; 42.65.Tg; 33.80.Wz; 52.35.Mw     

Two-color laser desorption of nanostructured MgO thin films

Neutral magnesium atom emission from nanostructured MgO thin films is induced using two-color nanosecond laser excitation. We find that combined vis/UV excitation, for single-color pulse energies below the desorption threshold, induces neutral Mg-atom emission with hyperthermal kinetic energies in the range of 0.1-0.2 eV. The observed metal atom emission is consistent with a mechanism involving rapid electron transfer to three-coordinated Mg surface sites. The two-color Mg-atom signal is significant only for parallel laser polarizations and temporally overlapped laser pulses indicating that intermediate excited states are short-lived compared to the 5 ns laser pulse duration.     

Plasmonic laser nanoablation of silicon by the scattering of femtosecond pulses near gold nanospheres

We present the fabrication of nanostructures ablated on silicon(100) by the plasmonic scattering of 780 nm, 220 fs laser pulses in the near-field of gold nanospheres. We take advantage of the enhanced plasmonic scattering of ultrashort laser light in the particle near-field to ablate well-defined nanocraters. Gold nanospheres of 150 nm diameter are deposited onto a silicon surface and irradiated with a single laser pulse. We studied the effect of laser polarization on the morphology of ablated nanostructures and estimated the minimum fluence for plasmonic nanoablation. When the polarization of the incident radiation is directed at a 45° angle into the substrate surface, a near-field enhancement of 23.1±7.6 is measured, reducing the required silicon ablation fluence from 191±14 mJ/cm² to 8.2±2.9 mJ/cm². Enhancements are also measured for laser polarizations parallel to the substrate surface when the substrate is angled 0° and 45° to the incident irradiation, giving enhancements of 6.9±0.6 and 4.1±1.3, respectively. Generated nanocrater morphologies show a direct imprint of the particle dipolar scattering region, as predicted in our theoretical calculations. The measured near-field enhancement values agree well with the maximum field enhancements obtained in our calculations. The agreement between theory and measurements supports that the nanocraters are indeed formed by the enhanced plasmonic scattering in the near-field of the nanoparticles. PACS 42.62.-b; 52.38.Mf; 81.65.Cf; 81.16.-c; 78.67.Bf