A位取代对(Ca0.61Nd0.26)TiO3陶瓷烧结特性和介电性能的影响

采用常规固相反应法,以(Ca0.61Nd0.26)TiO3体系为基体成分,研究了A位取代对(Ca0.61Nd0.26)TiO3陶瓷的烧结特性和介电性能的影响规律。结果表明:Zn,Mg的A位取代,促使(Ca0.61Nd0.26)TiO3陶瓷烧结温度从1350℃降至1250℃。Zn,Mg在一定范围内A位取代(Ca0.61Nd0.26)TiO3中的Ca可形成钙钛矿结构的固溶体,Zn、Mg最大固溶度(x(Zn),y(Mg))分别不超过0.1和0.15mol。当取代量超过固溶度后,分别形成Ca2Zn4Ti15O36和MgTi2O5第二相。随Zn和Mg取代量的增加,陶瓷介电常数(εr)和谐振频率温度系数(τf)减小。陶瓷品质因数(Qf)值随Zn取代量先增后减,而随Mg取代量增加,其Qf值一直增大。Zn,Mg最佳取代分别为x(Zn)=0.15和y(Mg)=0.25,在1250℃烧结2h,[(Ca0.85Zn0.15)0.61Nd0.26]TiO3的介电性能:εr=93.60,Qf=12454GHz,τf= 150.3ppm·℃-1,[(Ca0.75Mg0.25)0.61Nd0.26]TiO3的介电性能:εr=72.48,Qf=14622GHz,τf= 108ppm·℃-1。     

ZrO2添加对BaO-La2O3-TiO2介质陶瓷介电性能的影响

BaO-La2O3-TiO2(BLT)是典型的高介电常数微波介质陶瓷,其作为微波谐振器与滤波器的关键材料,在微波通讯技术上有着重要的应用. 选用ZrO2对BLT进行改性研究,当ZrO2的加入量z＜0.5mol时,烧结体的主晶相为Ba6-3xLa8 2x(Ti1-zZrz)18O54(x=1/2)钨青铜结构(TB)固溶体,随ZrO2加入量的增多,烧结体中产生第二相,当z＝1.0mol时,烧结体的主晶相为La2Zr2O7和BaZrO3,这与结构许容因子的变化密切相关,获得较优介电性能如下εr=103.71,Q·f=4862.53 GHz,τf=168.97×10-6/℃,优于不添加ZrO2时烧结体介电性能(εr=139.73,Q·f=1238.96 GHz,τf=179.97×10-6/℃) ,说明少量ZrO2的加入可以改善BLT陶瓷的品质因数和频率温度系数,略降低介电常数. SEM分析表明,少量ZrO2的加入没有改变烧结体的微观形貌,改性前后烧结体内部均为典型的柱状TB固溶体形貌.     

掺杂Sm_2O_3的Y_2O_3-2TiO_2系微波介质陶瓷的性能研究

以具有中介电常数的新型Y2O3-2TiO2系微波介质陶瓷为基体,选用Sm2O3作为掺杂改性剂,通过传统固相法制备成陶瓷。重点研究了不同Sm2O3掺杂量对基体Y2O3-2TiO2微波介质陶瓷物相组成和介电性能的影响。采用X射线衍射和扫描电子显微镜分别对其物相组成和显微结构进行了分析,用阻抗分析仪和网络分析仪测试其介电性能。结果表明:掺杂Sm2O3未改变材料的主晶相,仍为A2B2O7烧绿石结构,Sm3+取代Y3+占据A位;掺杂有效降低了陶瓷的烧结温度,掺杂量为5%(质量分数)时,烧结温度为1330℃,材料的综合性能最佳,εr=23,tanδ=0.0046,Q×f=6713 GHz。     

熔盐法制备Ca0.9La0.2/3Cu3Ti4O12陶瓷粉体及其介电性能研究

以CaCO3,CuO,TiO2,La2O3为反应物,NaCl,KCl为熔盐,通过熔盐法分别在700、750、800、850℃条件下合成Ca0.9La0.2/3Cu3Ti4O12陶瓷粉体。利用XRD和SEM分别对陶瓷粉体的物相结构和微观形貌进行了分析,并对其介电性能进行了测试。实验结果表明,随着合成温度的升高,陶瓷粉体的钙钛矿相含量逐渐增大,与传统固相法相比,熔盐法制备的粉体无团聚现象,耗时少。Ca0.9La0.2/3Cu3Ti4O12粉体制备的陶瓷在1 000℃烧结、测试频率在100 Hz~10 kHz时,获得优良的介电性能:介电常数大大超过104,介电损耗在0.1~0.47之间。     

Li2O-Na2O-B2O3-SiO2烧结助剂对BaAl2Si2O8陶瓷结构与介电性能的影响

采用传统固相反应工艺,按化学计量比合成BaO-Al_2O3-SiO_2(BAS)-x%(w/w) Li_2O-Na_2O-B_2O3-SiO_2(LNBS)(x=0,1,2,3,4)陶瓷。研究不同LNBS烧结助剂添加量对BAS系微波介质陶瓷的结构和介电性能的影响。通过Clausius-Mossotti公式计算讨论了BAS理论与实验介电常数(εr)的差异。研究结果表明:LNBS烧结助剂中Li+进入钡长石Al3+位或单四元环(S4R)间隙,并产生了O_2-空位或Ba2+空位,从而促进BAS六方相向单斜相的转变。添加适量的LNBS烧结助剂后,BAS陶瓷的烧结温度从1 400℃降低到1 325℃,同时BAS陶瓷样品密度、品质因数(Qf)值以及频率温度系数(τf)得到改善。当x=1,烧结温度为1 325℃时,可获得综合性能相对较好的BAS陶瓷,其介电性能:Qf=35 199 GHz,εr=6.37,τf=-1.613×10-5℃-1。     

CaTiO3∶Zn溶胶-凝胶法制备、结构及介电性能

采用溶胶-凝胶法制备了CaTiO3∶Zn纳米粒子,透射电镜图显示平均粒径为25 nm。Zn的掺杂位置对于陶瓷相组成和烧结特性有很大影响。Ca1-xZnxTiO3和CaTiO3+zZnO样品的Zn以Zn2TiO4相形式存在;而CaZnyTi1-yO3-δ(y=0.01)样品中的Zn进入Ti位形成固溶体,无明显的降温效果,当Zn量增至0.05和0.1时,出现ZnO相。ZnO和Zn2TiO4第二相的存在均能明显促进陶瓷烧结。CaTiO3∶Zn超细粉体可在较低温度下致密烧结(≤1 250℃)。1 250℃烧结的CaZnyTi1-yO3-δ(y=0.01)陶瓷具有较好的介电性能:介电常数ε=157,品质因数Q×f=6 819 GHz,谐振频率温度系数τf=7.51×10-4℃-1。     

CaTiO3:Zn溶胶-凝胶法制备、结构及介电性能

采用溶胶-凝胶法制备了CaTiO3:Zn纳米粒子,透射电镜图显示平均粒径为25 nm.Zn的掺杂位置对于陶瓷相组成和烧结特性有很大影响.Ca1-xZnxTiO3和CaTiO3+zZnO样品的Zn以Zn2TiO4相形式存在;而CaZnyTi1-yO3-δy=0.01)样品中的Zn进入Ti位形成固溶体,无明显的降温效果,当Zn量增至0.05和0.1时,出现ZnO相.ZnO和Zn2TiO4第二相的存在均能明显促进陶瓷烧结.CaTiO3:Zn超细粉体可在较低温度下致密烧结(≤1 250 ℃).1 250℃烧结的CaZnyTi1-yO3-δ(y=0.01)陶瓷具有较好的介电性能:介电常数ε=157,品质因数Q×f=6 819 GHz,谐振频率温度系数(τ)f=7.51×10-4℃-1.     

预烧温度对CaO-Li_2O-Sm_2O_3-TiO_2微波介质陶瓷介电性能的影响

用固相反应法制备了CaO-Li2O-Sm2O3-TiO2(CLST)微波介质陶瓷。通过改变预烧温度(1 000~1 200℃)研究其对CLST微波介质陶瓷介电性能的影响。研究过程中,对预烧粉体与烧结陶瓷进行XRD与SEM分析,对陶瓷的介电性能εr、Q、τf进行了测试。结果表明,预烧温度对CLST微波介质陶瓷介电性能有较大影响,在预烧温度1 150℃,烧结温度1 340℃时可获得较好的介电性能:εr=112,Q=845,τf=52×10-6/℃。     

Bi_2O_3掺杂对Ag(Nb_(0.8)Ta_(0.2))O_3陶瓷结构和介电性能的影响(英文)

本文研究了Bi2O3掺杂对Ag(Nb0.8Ta0.2)O3陶瓷的结构和介电性能的影响。X射线衍射(XRD)结果表明,Bi2O3的掺杂可以使陶瓷中Ag+被还原并析出,且银析出的量随Bi2O3掺杂量的增加而不断增加,这可能源自于Bi3+对Ag+的取代。在一定范围内增大Bi2O3掺杂量可提高Ag(Nb0.8Ta0.2)O3陶瓷的室温介电常数,降低介电损耗,并使温度系数向负值方向移动。当Bi2O3的掺杂量约为3.5wt%时,样品具有较大的介电常数(ε=672)和较小的介电损耗(tanδ=7.3×10-4)。     

La3+,Sr2+置换对Ca[(Mg1/3Nb2/3)0.6Ti0.4]O3陶瓷微波介电性能的影响

研究了La^3＋，Sr^2＋置换对Ca[（Mg1/3Nb2/3）0.6Ti0.4]O3陶瓷微观结构与微波介电性能的影响。研究结果表明：La^3＋，Sr^2＋置换改性Ca[（Mg1/3Nb2/3）0.6Ti0.4]O3系列陶瓷均形成了单一正交系的钙钛矿结构；随着置换量的增加，La^3＋改性Ca[（Mg1/3Nb2/3）0.6Ti0.4]O3陶瓷的介电常数、介电损耗下降，同时谐振频率温度系数向正的方向移动，而Sr^2＋改性陶瓷则表现出相反的规律，其主要原因在于La^3＋，Sr^2＋置换所引起Ca[（Mg1/3Nb2/3）0.6TiO4]O3陶瓷内部氧八面体结构变化上的差异。     

Synthesis, composition, and structure of sillenite-type solid solutions in the Bi2O3-SiO2-MnO2 system

Individual compounds and solid solutions are obtained under hydrothermal conditions in the Bi(2)O(3)-SiO(2)-MnO(2) system in the form of faceted crystals and epitaxial films on the Bi(24)Si(2)O(40) substrate. The crystals have the shape of a cube (for the molar ratio of the starting components Na(2)SiO(3)·9H(2)O:Mn(NO(3))(2)·6H(2)O > 1), a tetrahedron (for Na(2)SiO(3)·9H(2)O:Mn(NO(3))(2)·6H(2)O < 1), or a tetrahedron-cube combination (for Na(2)SiO(3)·9H(2)O:Mn(NO(3))(2)·6H(2)O = 1). Crystal-chemical analysis based on the data of single-crystal and powder X-ray diffraction, IR spectra, and the results of calculation of the local balance by the bond-valence method reveals formation of the Bi(24)(Si(4+),Mn(4+))(2)O(40) phases, which probably include Mn(5+) ions (epitaxial films), as well as the Bi(24)(Si(4+),Bi(3+),Mn(4+))(2)O(40) and Bi(24)(Si(4+),Mn(4+))(2)O(40) phases in the (1 - x)Bi(3+)(24)Si(4+)(2)O(40) - x(Bi(3+)(24)Mn(4+)(2)O(40)) system and the Bi(24)(Bi(3+),Mn(4+))(2)O(40) phase in the (1 - x)Bi(3+)(24)Bi(3+)(2)(O(39)?(1)) - x(Bi(3+)(24)Mn(4+)(2)O(40)) system. Precision X-ray diffraction studies of single crystals of the Bi(24)(Bi,Si,Mn)(2)O(40) general composition show that these sillenites crystallize in space group P23 and not I23 as the Bi(24)Si(2)O(40) phase. The dissymmetrization of sillenite phases is observed for the first time. It is explained by a kinetic (growth) phase transition of the order-disorder type due to population of a crystallographic site by atoms with different crystal-chemical properties and quasi-equilibrium conditions of crystal growth in the course of a hydrothermal synthesis below 400 °C at unequal molar amounts of the starting components in the batch.     

A molecular dynamics study of the atomic structure of (CaO)x(SiO2)1-x glasses

The local atomic environment of Ca in (CaO)x(SiO2)1-x glasses is of interest because of the role of Ca in soda-lime glass, the application of calcium silicate glasses as biomaterials, and the previous experimental measurement of the Ca-Ca correlation in CaSiO(3) glass. Molecular dynamics has been used to obtain models of (CaO)x(SiO2)1-x glasses with x = 0, 0.1, 0.2, 0.3, 0.4, and 0.5, and with approximately 1000 atoms and size approximately 25 A. As expected, the models contain a tetrahedral silica network, the connectivity of which decreases as x increases. In the glass-forming region, i.e., x = 0.4 and 0.5, Ca has a mixture of 6- and 7-fold coordination. Bridging oxygen makes an important contribution to the coordination of Ca, with most bridging oxygens coordinated to 2 Si plus 1 Ca. The x = 0.5 model is in reasonable agreement with previous experimental studies, and does not substantiate the previous theory of cation ordering, which predicted Ca arranged in sheets. In the phase-separated region, i.e., x = 0.1 and 0.2, there is marked clustering of Ca.     

2-Aminoisobutyric acid in Co(II) and Co(II)/Ln(III) chemistry: homometallic and heterometallic clusters

The synthesis and magnetic properties of 13 new homo- and heterometallic Co(II) complexes containing the artificial amino acid 2-amino-isobutyric acid, aibH, are reported: [Co(II)(4)(aib)(3)(aibH)(3)(NO(3))](NO(3))(4)·2.8CH(3)OH·0.2H(2)O (1·2.8CH(3)OH·0.2H(2)O), {Na(2)[Co(II)(2)(aib)(2)(N(3))(4)(CH(3)OH)(4)]}(n) (2), [Co(II)(6)La(III)(aib)(6)(OH)(3)(NO(3))(2)(H(2)O)(4)(CH(3)CN)(2)]·0.5[La(NO(3))(6)]·0.75(ClO(4))·1.75(NO(3))·3.2CH(3)CN·5.9H(2)O (3·3.2CH(3)CN·5.9H(2)O), [Co(II)(6)Pr(III)(aib)(6)(OH)(3)(NO(3))(3)(CH(3)CN)(6)]·[Pr(NO(3))(5)]·0.41[Pr(NO(3))(3)(ClO(4))(0.5)(H(2)O)(1.5)]·0.59[Co(NO(3))(3)(H(2)O)]·0.2(ClO(4))·0.25H(2)O (4·0.25H(2)O), [Co(II)(6)Nd(III)(aib)(6)(OH)(3)(NO(3))(2.8)(CH(3)OH)(4.7)(H(2)O)(1.5)]·2.7(ClO(4))·0.5(NO(3))·2.26CH(3)OH·0.24H(2)O (5·2.26CH(3)OH·0.24H(2)O), [Co(II)(6)Sm(III)(aib)(6)(OH)(3)(NO(3))(3)(CH(3)CN)(6)]·[Sm(NO(3))(5)]·0.44[Sm(NO(3))(3)(ClO(4))(0.5)(H(2)O)(1.5)]·0.56[Co(NO(3))(3)(H(2)O)]·0.22(ClO(4))·0.3H(2)O (6·0.3H(2)O), [Co(II)(6)Eu(III)(aib)(6)(OH)(3)(NO(3))(3)(CH(3)OH)(4.87)(H(2)O)(1.13)](ClO(4))(2.5)(NO(3))(0.5)·2.43CH(3)OH·0.92H(2)O (7·2.43CH(3)OH·0.92H(2)O), [Co(II)(6)Gd(III)(aib)(6)(OH)(3)(NO(3))(2.9)(CH(3)OH)(4.9)(H(2)O)(1.2)]·2.6(ClO(4))·0.5(NO(3))·2.58CH(3)OH·0.47H(2)O (8·2.58CH(3)OH·0.47H(2)O), [Co(II)(6)Tb(III)(aib)(6)(OH)(3)(NO(3))(3)(CH(3)CN)(6)]·[Tb(NO(3))(5)]·0.034[Tb(NO(3))(3)(ClO(4))(0.5)(H(2)O)(0.5)]·0.656[Co(NO(3))(3)(H(2)O)]·0.343(ClO(4))·0.3H(2)O (9·0.3H(2)O), [Co(II)(6)Dy(III)(aib)(6)(OH)(3)(NO(3))(2.9)(CH(3)OH)(4.92)(H(2)O)(1.18)](ClO(4))(2.6)(NO(3))(0.5)·2.5CH(3)OH·0.5H(2)O (10·2.5CH(3)OH·0.5H(2)O), [Co(II)(6)Ho(III)(aib)(6)(OH)(3)(NO(3))(3)(CH(3)CN)(6)]·0.27[Ho(NO(3))(3)(ClO(4))(0.35)(H(2)O)(0.15)]·0.656[Co(NO(3))(3)(H(2)O)]·0.171(ClO(4)) (11), [Co(II)(6)Er(III)(aib)(6)(OH)(4)(NO(3))(2)(CH(3)CN)(2.5)(H(2)O)(3.5)](ClO(4))(3)·CH(3)CN·0.75H(2)O (12·CH(3)CN·0.75H(2)O), and [Co(II)(6)Tm(III)(aib)(6)(OH)(3)(NO(3))(3)(H(2)O)(6)]·1.48(ClO(4))·1.52(NO(3))·3H(2)O (13·3H(2)O). Complex 1 describes a distorted tetrahedral metallic cluster, while complex 2 can be considered to be a 2-D coordination polymer. Complexes 3-13 can all be regarded as metallo-cryptand encapsulated lanthanides in which the central lanthanide ion is captivated within a [Co(II)(6)] trigonal prism. dc and ac magnetic susceptibility studies have been carried out in the 2-300 K range for complexes 1, 3, 5, 7, 8, 10, 12, and 13, revealing the possibility of single molecule magnetism behavior for complex 10.     

Ce0.1+xTi0.5-xAl0.2Y0.1La0.1O1.8材料的制备及在三效催化剂中的应用

采用共沉淀法制备了Ce0.1+xTi0.5-xAl0.2Y0.1La0.1O1.8(0≤x≤0.4)材料, 并对所制备的材料进行了X射线衍射(XRD)和X射线光电子能谱(XPS)的表征, 测定了材料的比表面积(BET法)和储氧量(OSC), 同时采用氢气程序升温还原(H2-TPR)和氨气程序升温脱附(NH3-TPD)研究了材料的还原性能和表面酸性. 研究结果表明, Ce/Ti摩尔比大于1∶2的材料能形成立方萤石结构的固溶体, Ce/Ti摩尔比为1时, 材料表面Ce4+/Ce3+摩尔比达到最大; 随着Ce/Ti摩尔比的增大, 材料的储氧能力先增大后减小, 而TPR还原峰温则是先减小后增大, 当Ce/Ti摩尔比为1时, 材料的储氧量达到最大, 为660 μmol/g; 还原峰峰温最低, 为616 ℃. 以制备的材料为载体制备了一系列Pt/Ce0.1+xTi0.5-xAl0.2Y0.1La0.1O1.8三效催化剂, 并对催化剂进行了活性评价. 活性测试结果表明, 以Ce/Ti比为1的载体材料制成的催化剂对C3H8, CO和NO的起燃温度分别为236, 147和228 ℃, 表现出了优异的温度特性.     

298.16 K时Na+, Mg2+//Cl-, SO42-, NO3-, H2O体系中NaCl饱和区域相平衡

采用等温溶解平衡法研究了五元体系Na+, Mg2+//Cl-, SO42-, NO3-, H2O在298.16 K下氯化钠饱和平衡体系的溶解度, 获得了相应的投影干盐图、氯图和水图. 研究结果表明, 在298.16 K下氯化钠饱和时, 该五元体系投影干盐图由8个二盐共饱和的双变面、13条三盐共饱的单变线和6个四盐共饱的零变点构成, 存在两种复盐, 8个二盐共饱双变面分别对应于NaCl+NaNO3, NaCl+Na2SO4, NaCl+MgCl2·6H2O, NaCl+MgSO4·Na2SO4·4H2O, NaCl+Mg(NO3)2·6H2O, NaCl+NaNO3·Na2SO4·2H2O, NaCl+MgSO4·7H2O 和NaCl+MgSO4·(1—6)H2O. 讨论了该相图在新疆硝酸盐矿开发利用过程中的应用.     

Local structure of magnesium in silicate glasses: a 25Mg 3QMAS NMR study

We have reported the 25Mg triple-quantum magic-angle spinning (3QMAS) NMR spectra of silicate glasses. The two-dimensional spectra suggest that the magnesium ions in MgSiO3, CaMgSi2O6, Ca2MgSi2O7, Mg3Al2Si3O12, and Li2MgSi2O6 glasses are mainly in octahedral environments, although in Na2MgSi2O6, K2MgSi2O6, and K2MgSi5O12 glasses they form tetrahedral species. We discussed the coordination environments of Mg based on the field strength of competing Mg2+, Ca2+, Na+, K+, and Li+ cations, and convincingly demonstrated that there is a correlation between them. These results indicate that the two-dimensional NMR spectroscopy such as MQMAS technique is a very useful method to analyze the local environments of nonframework cations in noncrystalline solids.     

Construction of metal-organic frameworks: versatile behaviour of a ligand containing mono- and bidentate coordination sites

Five new coordination polymers based on a new 2,2'-bipyridine derived ligand N,N'-bis(pyridin-4-yl)-2,2'-bipyridine-5,5'-dicarboxamide (=L) are reported herein. Isostructural three-dimensional coordination polymers with a rare (4,6)-connected network of {4(4).6(2)}(3){4(6).8(9)}(2) topology were synthesised from Cu(NO(3))(2), Zn(NO(3))(2) or a mixture of Cu(NO(3))(2)/Fe(BF(4))(2) with L in complexes {[Cu(5)L(6)]·(NO(3))(10)·(H(2)O)(18)}(∞) (1), {[Zn(5)L(6)]·(NO(3))(10)·(H(2)O)(18)}(∞) (2) and {[Fe(x)Cu(y)L(6)]·(NO(3))(10)·(H(2)O)(18)}(∞) (3; where x+y=5). Complexes with two-dimensional grid structures resulted from treatment with CoCl(2) or Cd(NO(3))(2) with L in complexes {[CoLCl(2)]·DMF}(∞) (4) and {CdL(NO(3))(2)}(∞) (5).     

Simultaneous ion chromatographic separation of anions and cations on poly(aspartic acid) functionalized silica

Poly(aspartic acid)-silica (PolyCAT A), originally designed for the cation-exchange chromatography of proteins, is proposed for the simultaneous ion chromatographic separation of inorganic anions and cations. This is possible owing to the zwitterion-exchange properties of this stationary phase, which are attributed to the presence of both protonated aminopropyl and dissociated carboxylic groups in poly(aspartic acid) attached to the silica. The retention of alkali metal (Li+, Na+, K+), alkaline earth metal (Mg2+, Ca2+), ammonium and inorganic anions (Cl-, H2PO4-, Br-, NO2-, I-, IO3-, NO3-, ClO4-, SCN-) was tested in aqueous solutions of sulfuric, perchloric, sulfosalicylic, citric, oxalic, maleic and aspartic acids with conductimetric detection. The effect of eluent pH, together with the concentration and characteristics of the eluting ions, were studied. Under optimum conditions (0.3 mmol dm(-3) H2SO4-0.2 mmol dm(-3) Li2SO4 eluent), the simultaneous separation of three anions (Cl-, H2PO4-, NO3-) and four cations (Na+, K+, Mg2+, Ca2+), on a PolyCAT A column (200 x 4.6 mm id, 5 microm film thickness) was achieved in 9 min.     

Artificial amino acids in nickel(II) and nickel(II)/lanthanide(III) chemistry

The synthesis and magnetic properties of five new homo- and heterometallic nickel(II) complexes containing artificial amino acids are reported: [Ni(4)(aib)(3)(aibH)(3)(NO(3))](NO(3))(4)·3.05MeOH (1·3.05MeOH), [Ni(6)La(aib)(12)](NO(3))(3)·5.5H(2)O (2·5.5H(2)O), [Ni(6)Pr(aib)(12)](NO(3))(3)·5.5H(2)O (3·5.5H(2)O), [Ni(5)(OH)(2)(l-aba)(4)(OAc)(4)]·0.4EtOH·0.3H(2)O 6(4·0.4EtOH·0.3H(2)O), and [Ni(6)La(l-aba)(12)][La(2)(NO(3))(9)] (5; aibH = 2-aminoisobutyric acid; l-abaH = l-2-aminobutyric acid). Complexes 1 and 4 describe trigonal-pyramidal and square-based pyramidal metallic clusters, respectively, while complexes 2, 3, and 5 can be considered to be metallocryptand-encapsulated lanthanides. Complexes 4 and 5 are chiral and crystallize in the space groups I222 and P2(1)3, respectively. Direct-current magnetic susceptibility studies in the 2-300 K range for all complexes reveal the presence of dominant antiferromagnetic exchange interactions, leading to small or diamagnetic ground states.     

Mg-Ni-Al-EDTA柱撑LDHs层状材料的水热合成、结构及性能

以Mg(NO3)2.6H2O、Ni(NO3)2.6H2O、Al(NO3)3.9H2O和[CH2N(CH2COOH)2]2为原料,采用水热合成法,合成了Mg-Ni-Al三元EDTA柱撑LDHs层状材料。采用ICP、元素分析仪、XRD、FTIR、TG-DSC、SEM等手段对样品进行了表征。探讨了pH值、反应温度、反应时间和原料配比对EDTA柱撑LDHs材料合成的影响。结果表明,在pH=8、反应温度控制在140℃、反应时间为24 h时,可以合成出结构规整、晶形良好、各层间排列紧密有序的含不同比例金属阳离子的EDTA柱撑LDHs材料。Mg-Ni-Al三元EDTA柱撑LDHs层状材料通过层间EDTA对Co2+的螯合作用,可以在较短时间内吸附溶液中的Co2+,去除率在97%以上。pH值、吸附时间、吸附温度、固体投加量及初始Co2+浓度对去除率均有不同程度的影响。