Synthesis of Ru-Pt and Ru-Pd mixed-metal imido clusters from a diruthenium imido-methylene scaffold [(Cp*Ru)2(mu2-NPh)(mu2-CH2)

The diruthenium mu2-imido mu2-methylene complex [(Cp*Ru)2(mu2-NPh)(mu2-CH2)] serves as a bifunctional scaffold for cluster synthesis, producing a mu3-imido Ru2Pt cluster [(Cp*Ru)2(mu3-NPh)(mu2-CH2)Pt(PMe3)2] on treatment with [Pt(eta2-C2H4)(PMe3)2] and a mu3-methylidyne Ru4Pd2 cluster [(Cp*Ru)2(mu2-NPh)(mu3-CH)PdCl]2 with [PdMeCl(cod)].     

Hexanuclear iron(III) salicylaldoximato complexes presenting the [Fe6(mu3-O)2(mu2-OR)2]12+ core: syntheses, crystal structures, and spectroscopic and magnetic characterization

The use of salicylaldehyde oxime (H2salox) in iron(III) carboxylate chemistry has yielded two new hexanuclear compounds [Fe6(mu3-O)2(O2CPh)10(salox)2(L)2].xMeCN.yH2O [L = MeCONH2, x = 6, y = 0 (1); L = H2O, x = 2, y = 3 (2)]. Compound 1 crystallizes in the triclinic space group P with (at 25 degrees C) a = 13.210(8) A, b = 13.87(1) A, c = 17.04(1) A, alpha = 105.79(2) degrees , beta = 96.72(2) degrees , gamma = 116.69(2) degrees , V = 2578.17(2) A(3), and Z = 1. Compound 2 crystallizes in the monoclinic space group C2/c with (at 25 degrees C) a = 21.81(1) A, b = 17.93(1) A, c = 27.72(1) A, beta = 111.70(2) degrees , V = 10070(10) A(3), and Z = 4. Complexes 1 and 2 contain the [Fe6(mu3-O)2(mu2-OR)2]12+ core and can be considered as two [Fe3(mu3-O)] triangular subunits linked by two mu2-oximato O atoms of the salox2- ligands, which show the less common mu3:eta1:eta2:eta1 coordination mode. The benzoato ligands are coordinated through the usual syn,syn-mu2:eta1:eta1 mode. The terminal MeCONH2 ligand in 1 is the hydrolysis product of the acetonitrile solvent in the presence of the metal ions. M?ssbauer spectra from powdered samples of 2 give rise to two well-resolved doublets with an average isomer shift consistent with that of high-spin Fe(III) ions. The two doublets, at an approximate 1:2 ratio, are characterized by different quadrupole splittings and are assigned to the nonequivalent Fe(III) ions of the cluster. Magnetic measurements of 2 in the 2-300 K temperature range reveal antiferromagnetic interactions between the Fe(III) ions, stabilizing an S = 0 ground state. NMR relaxation data have been used to investigate the energy separation between the low-lying states, and the results are in agreement with the susceptibility data.     

The inverse sandwich complex [(K(18-crown-6))2Cp][CpFe(CO)2]--unpredictable redox reactions of [CpFe(CO)2]I with the silanides Na[SiRtBu2] (R = Me, tBu) and the isoelectronic phosphanyl borohydride K[PtBu2BH3

The dimeric iron carbonyl [CpFe(CO)(2)](2) and the iodosilanes tBu(2)RSiI were obtained from the reaction of [CpFe(CO)(2)]I with the silanides Na[SiRtBu(2)] (R = Me, tBu) in THF. By the reactions of [CpFe(CO)(2)]I and Na[SiRtBu(2)] (R = Me, tBu) the disilanes tBu(2)RSiSiRtBu(2) (R = Me, tBu) were additionally formed using more than one equivalent of the silanide. In this context it should be noted that reduction of [CpFe(CO)(2)](2) with Na[SitBu(3)] gives the disilanes tBu(3)SiSitBu(3) along with the sodium ferrate [(Na(18-crown-6))(2)Cp][CpFe(CO)(2)]. The potassium analogue [(K(18-crown-6))(2)Cp][CpFe(CO)(2)] (orthorhombic, space group Pmc2(1)), however, could be isolated as a minor product from the reaction of [CpFe(CO)(2)]I with [K(18-crown-6)][PtBu(2)BH(3)]. The reaction of [CpFe(CO)(2)](2) with the potassium benzophenone ketyl radical and subsequent treatment with 18-crown-6 yielded the ferrate [K(18-crown-6)][CpFe(CO)(2)] in THF at room temperature. The crown ether complex [K(18-crown-6)][CpFe(CO)(2)] was analyzed using X-ray crystallography (orthorhombic, space group Pna2(1)) and its thermal behaviour was investigated.     

Iron-arylimide clusters [Fe(m)()(NAr)(n)Cl(4)](2)(-) (m,n = 2, 2; 3, 4; 4, 4) from a ferric amide precursor: synthesis,characterization, and comparison to Fe-S chemistry

Tetrahedral FeCl[N(SiMe(3))(2)](2)(THF) (2), prepared from FeCl(3) and 2 equiv of Na[N(SiMe(3))(2)] in THF, is a useful ferric starting material for the synthesis of weak-field iron-imide (Fe-NR) clusters. Protonolysis of 2 with aniline yields azobenzene and [Fe(2)(mu-Cl)(3)(THF)(6)](2)[Fe(3)(mu-NPh)(4)Cl(4)] (3), a salt composed of two diferrous monocations and a trinuclear dianion with a formal 2 Fe(III)/1 Fe(IV) oxidation state. Treatment of 2 with LiCl, which gives the adduct [FeCl(2)(N(SiMe(3))(2))(2)](-) (isolated as the [Li(TMEDA)(2)](+) salt), suppresses arylamine oxidation/iron reduction chemistry during protonolysis. Thus, under appropriate conditions, the reaction of 1:1 2/LiCl with arylamine provides a practical route to the following Fe-NR clusters: [Li(2)(THF)(7)][Fe(3)(mu-NPh)(4)Cl(4)] (5a), which contains the same Fe-NR cluster found in 3; [Li(THF)(4)](2)[Fe(3)(mu-N-p-Tol)(4)Cl(4)] (5b); [Li(DME)(3)](2)[Fe(2)(mu-NPh)(2)Cl(4)] (6a); [Li(2)(THF)(7)][Fe(2)(mu-NMes)(2)Cl(4)] (6c). [Li(DME)(3)](2)[Fe(4)(mu(3)-NPh)(4)Cl(4)] (7), a trace product in the synthesis of 5a and 6a, forms readily as the sole Fe-NR complex upon reduction of these lower nuclearity clusters. Products were characterized by X-ray crystallographic analysis, by electronic absorption, (1)H NMR, and M?ssbauer spectroscopies, and by cyclic voltammetry. The structures of the Fe-NR complexes derive from tetrahedral iron centers, edge-fused by imide bridges into linear arrays (5a,b; 6a,c) or the condensed heterocubane geometry (7), and are homologous to fundamental iron-sulfur (Fe-S) cluster motifs. The analogy to Fe-S chemistry also encompasses parallels between Fe-mediated redox transformations of nitrogen and sulfur ligands and reductive core conversions of linear dinuclear and trinuclear clusters to heterocubane species and is reinforced by other recent examples of iron- and cobalt-imide cluster chemistry. The correspondence of nitrogen and sulfur chemistry at iron is intriguing in the context of speculative Fe-mediated mechanisms for biological nitrogen fixation.     

A novel carboxylate-free ferromagnetic trinuclear mu(3)-oxo-manganese(III) complex with distorted pentagonal-bipyramidal metal centers

In methanol, the reaction of Mn(ClO(4))(2).6H(2)O and 1,2-bis(biacetylmonoximeimino)ethane (H(2)bamen) in the presence of triethylamine affords a trinuclear complex having the formula [Mn(3)(mu(3)-O)(mu(3)-bamen)(3)]ClO(4).2H(2)O. The structure of this complex shows a symmetric planar central [Mn(III)(3)(mu(3)-O)] unit coordinated to three hexadentate bridging (via oximate groups) ligands. The N(4)O(3) coordination sphere around each metal center is very close to pentagonal-bipyramidal. A cyclic voltammogram of the complex displays two reversible and an irreversible response due to Mn(III)(3) --> Mn(III)(2)Mn(IV), Mn(III)(2)Mn(IV) --> Mn(III)Mn(IV)(2), and Mn(III)Mn(IV)(2) --> Mn(IV)(3) oxidation processes, respectively. Cryomagnetic data reveal that the complex is ferromagnetic.     

Syntheses of the 47 electron clusters [(Cp*Fe)3(mu3-X)2] (X = S, Se) and the First Fe/Sn/Se Heterocubane Cluster [(CpFe)3(SnCl3)(mu3-Se)4] x DME by the use of chalcogenostannate salts

By reacting 1-aminoethylammonium (H2NCH2CH2NH3+ = enH+) salts of [Sn2E6]4- anions (E = S, Se), [enH]4[Sn2S6] (1) and [enH]4[Sn2Se6] x en (2), with FeCl2/LiCp, three novel (partly) oxidized, Cp* ligated iron chalcogenide clusters were synthesized. Two of them, [(CpFe)3(mu3-S)2] (3) and [(Cp*Fe)3(mu3-Se)2] (4), contain formally 47 valence electrons. [(Cp*Fe)3(SnCl3)(mu3-Se)4] x DME (5) represents the first known mixed metal Fe/Sn/Se heterocubane type cluster. Compounds 3-5 were structurally characterized by single-crystal X-ray diffraction, and the odd valence electron number of the [Fe3E2] clusters (E = S, Se) was confirmed by density functional (DFT) investigations, mass spectrometry, cyclic voltammetry and a susceptibility measurement of 3.     

Mechanistic insight into the N=N bond-cleavage of azo-compounds that was induced by an Al-Al-bonded compound [L(2-)Al(II)-Al(II)L(2-)

An α-diimine-stabilized Al-Al-bonded compound [L(2-)Al(II)-Al(II)L(2-)] (L = [{(2,6-iPr(2)C(6)H(3))NC(Me)}(2)]; 1) consists of dianionic α-diimine ligands and sub-valent Al(2+) ions and thus could potentially behave as a multielectron reductant. The reactions of compound 1 with azo-compounds afforded phenylimido-bridged products [L(-)Al(III)(μ(2)-NPh)(μ(2)-NAr)Al(III)L(-)] (2-4). During the reaction, the dianionic ligands and Al(2+) ions were oxidized into monoanions and Al(3+), respectively, whilst the [NAr](2-) imides were produced by the four-electron reductive cleavage of the N=N double bond. Upon further reduction by Na, the monoanionic ligands in compound 2 were reduced to the dianion to give [(L(2-))(2)Al(III)(2)(μ(2)-NPh)(2)Na(2)(thf)(4)] (5). Interestingly, when asymmetric azo-compounds were used, the asymmetric adducts were isolated as the only products (compounds 3 and 4). DFT calculations indicated that the reaction was quite feasible in the singlet electronic state, but the final product with the triplet-state monoanionic ligands could result from an exothermic singlet-to-triplet conversion during the reaction process.     

Diferratricarbaboranes of the subcloso-[(eta5-C5H5)2Fe2C3B8H11] type, the first representatives of the 13-vertex dimetallatricarbaborane series

Treatment of the [2-Cp-9-tBuNH-closo-2,1,7,9-FeC(3)B(8)H(10)] (1) ferratricarbollide (Cp = eta(5)-C(5)H(5) (-)) with Na(+) C(10)H(8) (-) in 1,2-dimethoxyethane (DME) at room temperature produced an air-sensitive transient anion with a tentatively identified nido-[tBuNH-CpFeC(3)B(8)H(10)](2-) constitution. In-situ reaction of this low-stability ion with [CpFe(CO)(2)I] or [CpFe(CO)(2)](2) generated three violet diferratricarbaboranes identified as paramagnetic subcloso complexes [4,5-Cp(2-)-4,5,1,6,7-Fe(2)C(3)B(8)H(11)] (2; yield 2 %), [4,5-Cp(2-)-4,5,1,7,12-Fe(2)C(3)B(8)H(11)] (3; yield 2 %), and [7-tBuNH-4,5-Cp(2-)-4,5,1,7,12-Fe(2)C(3)B(8)H(10)] (4; yield 14 %). These first representatives of the 13-vertex dimetallatricarbaborane family were characterized by EPR and IR spectroscopy, and mass spectrometry, and their structures were determined by X-ray diffraction analysis.     

A mechanistic study of the reaction between a diiron(II) complex [FeII(2)(mu-OH)2(6-Me3-TPA)2](2+) and O2 to form a diiron(III) peroxo complex

A kinetic study of the reaction between a diiron(II) complex [Fe(II)(2)(mu-OH)(2)(6-Me(3)-TPA)(2)](2+) 1, where 6-Me(3)-TPA = tris(6-methyl-2-pyridylmethyl)amine, and dioxygen is presented. A diiron(III) peroxo complex [Fe(III)(2)(mu-O)(mu-O(2))(6-Me(3)-TPA)(2)](2+) 2 forms quantitatively in dichloromethane at temperatures from -80 to -40 degrees C. The reaction is first order in [Fe(II)(2)] and [O(2)], with the activation parameters DeltaH(double dagger) = 17 +/- 2 kJ mol(-1) and DeltaS(double dagger) = -175 +/- 20 J mol(-1) K(-1). The reaction rate is not significantly influenced by the addition of H(2)O or D(2)O. The reaction proceeds faster in more polar solvents (acetone and acetonitrile), but the yield of 2 is not quantitative in these solvents. Complex 1 reacts with NO at a rate about 10(3) faster than with O(2). The mechanistic analysis suggests an associative rate-limiting step for the oxygenation of 1, similar to that for stearoyl-ACP Delta(9)-desaturase, but distinct from the probable dissociative pathway of methane monoxygenase. An eta(1)-superoxo Fe(II)Fe(III) species is a likely steady-state intermediate during the oxygenation of complex 1.     

Divalent dirhodium imido complexes: formation, structure, and alkyne cycloaddition reactivity

Dirhodium amido complexes [(Cp*Rh)2(mu2-NHPh)(mu2-X)] (X = NHPh (2), Cl (3), OMe (4); Cp* = eta5-C5Me5) were prepared by chloride displacement of [Cp*Rh(mu2-Cl)]2 (1) and have been used as precursors to a dirhodium imido species [Cp*Rh(mu2-NPh)RhCp*]. The imido species can be trapped by PMe3 to give the adduct [Cp*Rh(mu2-NPh)Rh(PMe3)Cp*] (5) and undergoes a formal [2 + 2] cycloaddition reaction with unactivated alkynes to give the azametallacycles [Cp*Rh(mu2-eta2:eta3-R1CCR2NPh)RhCp*] (R1 = R2 = Ph (6a), R1 = H, R2 = t-Bu (6b), R1 = H, R2 = p-tol (6c)). Isolation of a relevant unsaturated imido complex [Cp*Rh(mu2-NAr)RhCp*] (7) was achieved by the use of a sterically hindered LiNHAr (Ar = 2,6-diisopropylphenyl) reagent in a metathesis reaction with 1. X-ray structures of 2, 6a, 7 and the terminal isocyanide adduct [Cp*Rh(mu2-NAr)Rh(t-BuNC)Cp*] (8) are reported.     

Cyanido-bridged Fe(III)-Mn(III) heterobimetallic materials built from Mn(III) Schiff base complexes and di- or tri-cyanido Fe(III) precursors

The reaction of [Fe(III)L(CN)(3)](-) (L being bpca = bis(2-pyridylcarbonyl)amidate, pcq = 8-(pyridine-2-carboxamido)quinoline) or [Fe(III)(bpb)(CN)(2)](-) (bpb = 1,2-bis(pyridine-2-carboxamido)benzenate) ferric complexes with Mn(III) salen type complexes afforded seven new bimetallic cyanido-bridged Mn(III)-Fe(III) systems: [Fe(pcq)(CN)(3)Mn(saltmen)(CH(3)OH)]·CH(3)OH (1), [Fe(bpca)(CN)(3)Mn(3-MeO-salen)(OH(2))]·CH(3)OH·H(2)O (2), [Fe(bpca)(CN)(3)Mn(salpen)] (3), [Fe(bpca)(CN)(3)Mn(saltmen)] (4), [Fe(bpca)(CN)(3)Mn(5-Me-saltmen)]·2CHCl(3) (5), [Fe(pcq)(CN)(3)Mn(5-Me-saltmen)]·2CH(3)OH·0.75H(2)O (6), and [Fe(bpb)(CN)(2)Mn(saltmen)]·2CH(3)OH (7) (with saltmen(2-) = N,N'-(1,1,2,2-tetramethylethylene)bis(salicylideneiminato) dianion, salpen(2-) = N,N'-propylenebis(salicylideneiminato) dianion, salen(2-) = N,N'-ethylenebis(salicylideneiminato) dianion). Single crystal X-ray diffraction studies were carried out for all these compounds indicating that compounds 1 and 2 are discrete dinuclear [Fe(III)-CN-Mn(III)] complexes while systems 3-7 are heterometallic chains with {-NC-Fe(III)-CN-Mn(III)} repeating units. These chains are connected through π-π and short contact interactions to form extended supramolecular networks. Investigation of the magnetic properties revealed the occurrence of antiferromagnetic Mn(III)···Fe(III) interactions in 1-4 while ferromagnetic Mn(III)···Fe(III) interactions were detected in 5-7. The nature of these Mn(III)···Fe(III) magnetic interactions mediated by a CN bridge appeared to be dependent on the Schiff base substituent. The packing is also strongly affected by the nature of the substituent and the presence of solvent molecules, resulting in additional antiferromagnetic interdinuclear/interchain interactions. Thus the crystal packing and the supramolecular interactions induce different magnetic properties for these systems. The dinuclear complexes 1 and 2, which possess a paramagnetic S(T) = 3/2 ground state, interact antiferromagnetically in their crystal packing. At high temperature, the complexes 3-7 exhibit a one-dimensional magnetic behavior, but at low temperature their magnetic properties are modulated by the supramolecular arrangement: a three-dimensional antiferromagnetic order with a metamagnetic behavior is observed for 3, 4, and 7, and Single-Chain Magnet properties are detected for 5 and 6.     

Electrochemical and photosensitized redox reactions of a prussian blue film layered on a WO3/[Ru(bpy)3]2+/polymer hybrid film.

A hybrid film of WO(3)/tris(2,2'-bipyridine)ruthenium(II) ([Ru(bpy)(3)](2+))/poly(sodium 4-styrenesulfonate) (PSS) (denoted as a WRP hybrid film) was prepared as a base layer on an indium tin oxide electrode substrate by cathodic electrodeposition from a colloidal ternary solution containing peroxotungstic acid, [Ru(bpy)(3)](2+), and PSS. Prussian blue, Fe(III) (4)[Fe(II)(CN)(6)](3) (Fe(II)-Fe(III)) was cathodically electrodeposited on the WRP hybrid film from a Berlin brown (Fe(III)-Fe(III)) colloidal solution to give a WRP/Fe(II)-Fe(III) bilayer film. Spectrocyclic voltammetry measurement of the WRP/Fe(II)-Fe(III) bilayer film reveals that Prussian white (Fe(II)-Fe(II)) is oxidized to Fe(II)-Fe(III) by electrogenerated Ru(III), and Fe(II)-Fe(III) is re-reduced to Fe(II)-Fe(II) by electrogenerated H(x)WO(3). Visible-light irradiation of the WRP hybrid film generates a small photocurrent (approximately 8 nA cm(-2)) at 0.4 V of an applied potential, whereas irradiation of the WRP/Fe(II)-Fe(II) bilayer film (Fe(II)-Fe(III) is electrochemically reduced to the Fe(II)-Fe(II) state) significantly generates a steady photoanodic current of 2.0-1.1 microA cm(-2) under the same conditions, thus demonstrating that the photoanodic current is produced by the layered Fe(II)-Fe(II) film. The photoaction spectrum of the bilayer film reveals that the photoanodic current is based on the photoexcitation of [Ru(bpy)(3)](2+). The photogeneration of Fe(II)-Fe(III) from Fe(II)-Fe(II) is shown by the absorption spectral change of the bilayer film on irradiation. These results corroborate the notion that Fe(II)-Fe(II) is oxidized by photogenerated Ru(III) to generate Fe(II)-Fe(III). However, the rate of photogeneration of Fe(II)-Fe(III) is slow, which could be ascribed to the fast back electron transfer (ET) from WO(3) to Ru(III), comparable with the forward ET from Fe(II)-Fe(II) to Ru(III). The fast back ET could be a crucial problem for the [Ru(bpy)(3)](2+)-sensitized reaction in the hybrid film.     

Synthesis and structure of the organometallic MFe2(mu3-S)2 clusters (M = Mo or Fe)

New organometallic clusters with the MFe2(mu3-S)2 core (M = Mo or Fe) have been synthesized from inorganic [MoFe3S4] or [Fe4S4] clusters under high pressure CO. The reaction of (Cl4-cat)2Mo2Fe6S8(PR3)6[R = Et, (n)Pr] with high pressure CO produced the crystalline [MoFe2S2]4+ clusters, (Cl4-cat)Mo(O)Fe2S2(CO)(n)(PR3)6-n[n= 4, Et =I, (n)Pr =II; n = 5, Et =III] after flash column chromatography. The similar [MoFe2S2]4+ cluster, (Cl4-cat)2MoFe2S2(CO)2(depe)(2)(IV), also has been achieved by the reactions of (Cl4-cat)MoFe3S3(CO)6(PEt3)2 with depe by reductive decoupling of the cluster. For the [Fe3(mu3-S)2]4+ cluster, [Fe4S4(PcHex3)4](BPh4) was reacted with high pressure CO to produce a new Fe3S2(CO)7(PcHex)(2)(V) compound. These reactions generalized the preparation of organometallic compounds from inorganic clusters. All the compounds have been characterized by single crystal X-ray crystallography. A possible reaction pathway for the synthesis of the MFe2(mu3-S) clusters (M = Mo or Fe) has also been suggested.     

Cyanide-bridged Mn(III)-Fe(III) bimetallic complexes based on the pentacyano(1-methylimidazole)ferrate(III) building block: structure and magnetic characterizations

Seven cyanide-bridged bimetallic complexes have been synthesized by the reaction of [Fe(1-CH3im)(CN)5]2- with Mn(III) Schiff base complexes. Their crystal structure and magnetic properties have been characterized. Five complexes, [Mn2(5-Brsalen)2Fe(CN)5(1-CH3im)] x H2O (1), [Mn2(5-Clsalen)2(H2O)2Fe(CN)5(1-CH3im)] x H2O (2), [Mn2(5-Clsaltn)2(H2O)2Fe(CN)5(1-CH3im)] (3), [Mn2(5-Clsaltmen)2(H2O)2Fe(CN)5(1-CH3im)] x H2O (4), and [Mn2(5-Brsaltmen)2(H2O)2Fe(CN)5(1-CH3im)] x CH3OH (5), are neutral and trinuclear with two [Mn(SB)]+ (SB2- = Schiff base ligands) and one [Fe(1-CH3im)(CN)5]2-. Complex {[Et4N][Mn(acacen)Fe(CN)5(1-CH3im)]}n x 6nH2O (6) is one-dimensional with alternate [Mn(acacen)]+ and [Fe(CN)5(1-CH3im)]2- units. The two-dimensional complex {[Mn4(saltmen)4Fe(CN)5(1-CH3im)]}n[ClO4]2n x 9nH2O (7) consists of Mn4Fe units which are further connected by the phenoxo oxygen atoms. Magnetic studies show the presence of ferromagnetic Mn(III)-Fe(III) coupling in the trinuclear compounds with the magnetic coupling constant (J) ranging from 4.5 to 6.0 cm-1, based on the Hamiltonian H = -2JSFe(SMn(1) + SMn(2)). Antiferromagnetic interaction has been observed in complex 6, whereas ferromagnetic coupling occurs in complex 7. Complexes 6 and 7 exhibit long-range magnetic ordering with a TN value of 4.0 K for 6 and Tc of 4.8 K for 7. Complex 6 shows metamagnetic behavior at 2 K, and complex 7 possesses a hysteresis loop with a coercive field of 500 Oe, typical of a soft ferromagnet.     

Reactivity of amido ligands on a dinuclear Ru(II) center: formation of imido complexes and C-N coupling reaction with alkyne

Treatment of a dinuclear Ru(II) amido complex [Cp*Ru(mu2-NHPh)]2 (Cp* = eta5-C5Me5) with small organic substrates including CO, tert-butyl isocyanide, a sulfur ylide Ph2S=CH2, and diphenylacetylene resulted in an unexpected disproportionation reaction of the bridging amido ligands to produce a free amine and a series of imido-bridged diruthenium complexes [(Cp*Ru)2(mu2-L)(mu2-NPh)] (L = CO, t-BuNC, CH2). In the case of diphenylacetylene, the bridging imido ligand underwent subsequent coupling reaction with the coordinated alkyne to form an iminoalkenyl complex [(Cp*Ru)2(mu2-PhNCPhCPh)].     

Theoretical Study of the Solvent Effect on the Electronic and Vibrational Properties of [CpFe(CO)<Subscript>2</Subscript>(NCS)] and [CpFe(CO)<Subscript>2</Subscript>(SCN)] Linkage Isomers

The present study illustrates the stability of [CpFe(CO)₂(NCS)] and [CpFe(CO)₂(SCN)] linkage isomers by the use of MPW1PW91 quantum method in the gas and solution phases. Our results reveal that the [CpFe(CO)₂(NCS)] isomer is more stable than the [CpFe(CO)₂(SCN)] isomer. Based on the polarizable continuum model, the effect of the solvent polarity on the stability, structural parameters, frontier orbital energies, and vibrational modes of carbonyl ligands (ν_CO) of these linkage complexes is explored. The molecular orbital analysis suggests that the major contributions to HOMO and LUMO arise from the ambidentate ligand and Fe in two isomers, respectively. In addition, the bonding interaction between the CpFe(CO)₂ fragment and the ambidentate ligand is studied by means of the energy decomposition analysis. The back-bonding effect in Fe–CO bonds is revealed in the calculation of the quadrupole polarization of the carbon atom by the QTAIM analysis. The character of Fe–N and Fe–S bonds in these complexes is analyzed by the natural bond orbital analysis.     

Formation of trinuclear palladium orthometalated complexes with unprecedented asymmetrical (mu 3-S)(mu 3-X) bridges (X = OH, SR, O2CR) from mu 2-hydroxo dimeric complexes and CS2

Complexes [Pd(3)(mu(3)-S)(mu(3)-X)(L)(3)] (L = orthometalated imine), obtained by an unusual reaction of mu(2)-OH dimeric complexes and CS(2), are an unprecedented type of asymmetrical bridges between metallatriangles, which force an all-cis arrangement of the three orthometalated ligands relative to the metallatriangle.     

Reactivity of the heterometallic clusters [HMCo3(CO)12] and [Et4N][MCo3(CO)12] (M = Fe, Ru) toward phosphine selenides, including selenium transfer. Crystal structures of [HRuCo3(CO)7(mu-CO)3(mu-dppy)], [MCo2(mu3-Se)(CO)7(mu-dppy)], and [RuCo2(mu3-Se)(CO)7(mu-dppm)] [dppy = Ph2(2-C5H4N)P, dppm = Ph2PCH2PPh2

The reactivity of [HMCo3(CO)12] and [Et4N][MCo3(CO)12] (M = Fe, Ru) toward phosphine selenides such as Ph3PSe, Ph2P(Se)CH2PPh2, Ph2(2-C5H4N)PSe, Ph2(2-C4H3S)PSe, and Ph2[(2-C5H4N)(2-C4H2S)]PSe has been studied with the aim to obtain new selenido-carbonyl bimetallic clusters. The reactions of the hydrido clusters give two main classes of products: (i) triangular clusters with a mu3-Se capping ligand of the type [MCo2(mu3-Se)(CO)(9-x)L(y)] resulting from the selenium transfer (x = y = 1, 2, with L = monodentate ligand; x = 2, 4, and y = 1, 2, with L = bidentate ligand) (M = Fe, Ru) and (ii) tetranuclear clusters of the type [HMCo3(CO)12xL(y)] obtained by simple substitution of axial, Co-bound carbonyl groups by the deselenized phosphine ligand. The crystal structures of [HRuCo3(CO)7(mu-CO)3(mu-dppy)] (1), [MCo2(mu3-Se)(CO)7(mu-dppy)] (M = Fe (16) or Ru (2)), and [RuCo2(mu3-Se)(CO)7(mu-dppm)] (12) are reported [dppy = Ph2(2-C5H4N)P, dppm = Ph2PCH2PPh2]. Clusters 2, 12, and 16 are the first examples of trinuclear bimetallic selenido clusters substituted by phosphines. Their core consists of metal triangles capped by a mu3-selenium atom with the bidentate ligand bridging two metals in equatorial positions. The core of cluster 1 consists of a RuCo3 tetrahedron, each Co-Co bond being bridged by a carbonyl group and one further bridged by a dppy ligand. The coordination of dppy in a pseudoaxial position causes the migration of the hydride ligand to the Ru(mu-H)Co edge. In contrast to the reactions of the hydrido clusters, those with the anionic clusters [MCo3(CO)12]- do not lead to Se transfer from phosphorus to the cluster but only to CO substitution by the deselenized phosphine.     

On [Fe4S4]2+ -(mu2-SR)-M II bridge formation in the synthesis of an A-cluster analogue of carbon monoxide dehydrogenase/acetylcoenzyme A synthase

The construction of a synthetic analogue of the A-cluster of carbon monoxide dehydrogenase/acetylcoenzyme synthase, the site of acetylcoenzyme A formation, requires as a final step the formation of an unsupported [Fe(4)S(4)]-(mu(2)-SR)-Ni(II) bridge to a preformed cluster. Our previous results (Rao, P. V.; Bhaduri, S.; Jiang, J.; Holm, R. H. Inorg. Chem. 2004, 43, 5833) and the work of others have addressed synthesis of dinuclear complexes relevant to the A-cluster. This investigation concentrates on reactions pertinent to bridge formation by examining systems containing dinuclear and mononuclear Ni(II) complexes and the 3:1 site-differentiated clusters [Fe(4)S(4)(LS(3))L'](2-) (L' = TfO(-) (14), SEt (15)). The system 14/[{Ni(L(O)-S(2)N(2))}M(SCH(2)CH(2)PPh(2))](+) results in cleavage of the dinuclear complex and formation of [{Ni(L(O)-S(2)N(2))}Fe(4)S(4)(LS(3))]- (18), in which the Ni(II) complex binds at the unique cluster site with formation of a Ni(mu(2)-SR)(2)Fe bridge rhomb. Cluster 18 and the related species [{Ni(phma)}Fe(4)S(4)(LS(3))](3)- (19) are obtainable by direct reaction of the corresponding cis-planar Ni(II)-S(2)N(2) complexes with 14. The mononuclear complexes [M(pdmt)(SEt)]- (M = Ni(II), Pd(II)) with 14 in acetonitrile or Me(2)SO solution react by thiolate transfer to give 15 and [M(2)(pdmt)(2)]. However, in dichloromethane the Ni(II) reaction product is interpreted as [{Ni(pdmt)(mu(2)-SEt)}Fe(4)S(4)(LS(3))](2-) (20). Reaction of Et(3)NH(+) and 15 affords the double cubane [{Fe(4)S(4)(LS(3))}(2)(mu(2)-SEt)](3-) (21). Cluster 18 contains two mutually supportive Fe-(mu(2)-SR)-Ni(II) bridges, 19 exhibits one strong and one weaker bridge, 20 has one unsupported bridge (inferred from the (1)H NMR spectrum), and 21 has one unsupported Fe-(mu(2)-SR)-Fe bridge. Bridges in 18, 19, and 21 were established by X-ray structures. This work demonstrates that a bridge of the type found in the enzyme A-clusters is achievable by synthesis and implies that more stable, unsupported single thiolate bridges may require reinforcement by an additional covalent linkage between the Fe(4)S(4) and nickel-containing components. (LS(3) = 1,3,5-tris((4,6-dimethyl-3-mercaptophenyl)thio)-2,4,6-tris(p-tolylthio)benzene(3-); L(O)-S(2)N(2) = N,N'-diethyl-3,7-diazanonane-1,9-dithiolate(2-); pdmt = pyridine-2,6-methanedithiolate(2-); phma = N,N'-1,2-phenylenebis(2-acetylthio)acetamidate(4-); TfO = triflate.).     

The coordination chemistry of selenophosphite ligands. Synthesis and characterization of heterometallic tetranuclear clusters [M{CpFe(CO)(2)P(Se)(OR)(2)}(3)](PF(6)) (M = Cu, Ag; R = (n)Pr, (i)Pr) and [Cu(mu-X) {CpFe(CO)(2)P(Se)(O(i)Pr)(2)}](2) (X = Cl, Br)

A neutral selenium donor ligand, [CpFe(CO)(2)P(Se)(OR)(2)] is used for the construction of Cu(I) and Ag(I) complexes with a well-defined coordination environment. Four clusters [M{CpFe(CO)(2)P(Se)(OR)(2)}(3)](PF(6)), (where M = Cu, R = (n)Pr, ; R = (i)Pr, and M = Ag, R = (n)Pr, ; R = (i)Pr, ) are isolated from the reaction of [M(CH(3)CN)(4)(PF(6))] (where M = Cu or Ag) and [CpFe(CO)(2)P(Se)(OR)(2)] in a molar ratio of 1 : 3 in acetonitrile at 0 degrees C. The reaction of [CpFe(CO)(2)P(Se)(O(i)Pr)(2)] with cuprous halides in acetone produce two mixed-metal, Cu(I)(2)Fe(II)(2) clusters, [Cu(mu-X) {CpFe(CO)(2)P(Se)(O(i)Pr)(2)}](2) (X = Cl, ; Br, ). All six clusters have been fully characterized spectroscopically ((1)H, (13)C, (31)P, and (77)Se NMR, IR), and by elemental analyses. X-Ray crystal structures of and consist of discrete cationic clusters in which three iron-selenophosphito fragments are linked to the central copper or silver atom via selenium atoms. Both clusters and crystallize in the noncentrosymmetric, hexagonal space group P6[combining macron]2c. The coordination geometry around the copper or silver atom is perfect trigonal-planar with Cu-Se and Ag-Se distances, 2.3505(7) and 2.5581(7) A, respectively. X-Ray crystallography also reveals that each copper center in neutral heterometallic clusters and is trigonally coordinated to two halide ions and a selenium atom from the selenophosphito-iron moiety. The structures can also be delineated as a dimeric unit which is generated by an inversion center and has a Cu(2)X(2) parallelogram core. The dihedral angle between the Cu(2)X(2) plane and the plane composed of Cp ring is found to be 24.62 and 84.58 degrees for compound and , respectively. Hence the faces of two opposite Cp rings are oriented almost perpendicular to the Cu(2)X(2) plane in , but are close to be parallel in . This is the first report of the coordination chemistry of the anionic selenophosphito moiety [(RO)(2)PSe](-), the conjugated base of a secondary phosphine selenide, which acts as a bridging ligand with P-coordination on iron and Se-coordination to copper or silver.