Domoic acid at trace levels in lagoon waters: assessment of a method using internal standard quantification

Domoic acid (DA) is a neurotoxin produced by different algae, including pennate diatoms, principally from the genus Pseudo-nitzschia, and it is the main cause of amnesic shellfish poisoning. Determination of this toxin in seawater samples is fundamental to define the real contamination risks for aquatic species. We have developed two very sensitive instrumental methods using hydrophilic interaction liquid chromatography coupled using tandem mass spectrometry in positive and negative polarity modes. Instrumental detection limits were 9 pg mL^?1 for positive and 19 pg mL^?1 for negative ionisation. A procedural method based on solid-phase extraction for the determination of dissolved DA present in seawater has been developed, and an extraction procedure was employed for the determination of the toxin in the particulate fraction. DA quantification was performed using the internal standard method to account for signals fluctuations and random errors during sample treatment. To our knowledge, this is the first study to use this quantification method for DA determination. Trueness, extraction yield, matrix effects, repeatability and procedural detection limits were evaluated during method validation. Procedural detection limits of 0.3 pg mL^?1 (positive mode) and 0.6 pg mL^?1 (negative mode) were found for the dissolved fraction, and absolute limits of 0.4 pg (positive mode) and 6.0 pg (negative mode) for particulate samples were obtained. The most sensitive method in positive mode was applied to define DA occurrence in the Venice Lagoon. Trace concentrations of domoic acid ranging from 1.5 to 16.2 pg mL^?1 were found for the first time in the Venetian environment.

Magnetic molecularly imprinted polymer nanoparticles for the solid-phase extraction of paracetamol from plasma samples,followed its determination by HPLC

We are presenting magnetic molecularly imprinted polymer nanoparticles (m-MIPs) for solid-phase extraction and sample clean-up of paracetamol. The m-MIPs were prepared from magnetite (Fe₃O₄) as the magnetic component, paracetamol as the template, methacrylic acid as a functional monomer, and 2-(methacrylamido) ethyl methacrylate as a cross-linker. The m-MIPs were then characterized by transmission electron microscopy, FT-IR spectroscopy, X-ray diffraction and vibrating sample magnetometry. The m-MIPs were applied to the extraction of paracetamol from human blood plasma samples. Following its elution from the column loaded with the m-MIPs with an acetonitrile-buffer (9:1) mixture, it was submitted to HPLC analysis. Paracetamol can be quantified by this method in the 1 μg L^?1 to 300 μg L^?1 concentration range. The limit of detection and limit of quantification in plasma samples are 0.17 and 0.4 μg L^?1. The preconcentration factor of the m-MIPs is 40. The HPLC method shows good precision (4.5 % at 50 μg L^?1 levels) and recoveries (between 83 and 91 %) from spiked plasma samples. Figure

We are presenting magnetic molecularly imprinted polymer nanoparticles (m-MIPs) for solid-phase extraction and sample clean-up of paracetamol. The m-MIPs were applied to the extraction of paracetamol from human blood plasma samples     

Polyoxotungstate nanoclusters supported on silica as an efficient solid-phase microextraction fiber of polycyclic aromatic hydrocarbons

A highly porous silica-supported tungstophosphoric acid (PW) nanocluster was prepared for use in solid-phase microextraction (SPME) of polycyclic aromatic hydrocarbons (PAHs). The PWs represent a class of discrete transition metal-oxide nanoclusters and their structures resemble discrete fragments of metal-oxide structures of definite size and shape. Transition metal-oxide nanoclusters display large structural diversity, and their monodisperse sizes can be tuned from several Ångstroms up to 10 nm. The highly porous silica-supported tungstophosphoric acid nanocluster material is found to be capable of efficiently extracting PAHs from aqueous sample solutions. The nanomaterial was immobilized on a stainless steel wire for fabrication of the SPME fiber. Following thermal desorption, the PAHs were quantified by GC-MS. Analytical merits include limits of detection that range from 0.02 to 0.1 pg mL^?1 and a dynamic range as wide as from 0.001 to 100 ng mL^?1. Under optimum conditions, the repeatability for one fiber (n?=?3), expressed as the relative standard deviation, is between 4.3 % and 8.6 %. The method is simple, rapid, and inexpensive. The thermal stability of the fiber and the high relative recovery make this method superior to conventional methods of extraction.

The highly porous silica-supported tungstophosphoric acid nanocluster material is found to be capable of efficiently extracting PAHs from aqueous sample solutions. The prepared nanomaterial was immobilized onto a stainless steel wire for fabrication of the SPME fiber. Following thermal desorption, the PAHs were quantified by GC-MS.     

Determination of methylisothiocyanate in soil and water by HS-SPME followed by GC–MS–MS with a triple quadrupole

Methylisothiocyanate (MITC) is the main degradation product of metam sodium, a soil disinfectant widely used in agriculture, and is responsible for its disinfectant properties. Because MITC is highly toxic and volatile, metam sodium has to be applied in a manner that tries to reduce atmospheric emissions but still maintains adequate concentration of MITC in soil to ensure its disinfectant effect. Thus, monitoring of MITC concentrations in soil is required, and to this end sensitive, fast, and reliable analytical methods must be developed. In this work, a headspace solid-phase microextraction (HS-SPME) method was developed for MITC determination in water and soil samples using gas chromatography-tandem mass spectrometry (GC–MS–MS) with a triple-quadrupole analyzer. Two MS–MS transitions were acquired to ensure the reliable quantification and confirmation of the analyte. The method had linear behavior in the range tested (0.026–2.6 ng mL^?1 in water, 1–100 ng g^?1 in soil) with r ² over 0.999. Detection limits were 0.017 ng mL^?1 and 0.1 ng g^?1 in water and soil, respectively. Recoveries for five replicates were in the range 76–92 %, and RSD was below 7 % at the two spiking levels tested for each matrix (0.1 and 1 ng mL^?1 for water, 4 and 40 ng g^?1 for soil). The potential of using multiple HS-SPME for analyzing soil samples was also investigated, and its feasibility for quantification of MITC evaluated. The developed HS-SPME method was applied to soil samples from experimental plots treated with metam sodium following good agriculture practices. Figure

?     

A sensitive immunosorbent bio-barcode assay based on real-time immuno-PCR for detecting 3,4,3',4'-tetrachlorobiphenyl

A functionalized gold-nanoparticle bio-barcode assay, based on real-time immuno-PCR (IPCR), was designed for the determination of 3,4,3',4'-tetrachlorobiphenyl (PCB77). 15 nm gold nanoparticles were synthesized, and modified with thiol-capped DNA and goat anti-rabbit IgG. The nanoparticle probes were used to replace antibody–DNA conjugate in the IPCR, and were fixed on the PCR tube wall via the immune reaction. Real-time PCR was performed to quantify the DNA signal directly. Under optimized conditions, the new method was used to detect PCB77 with a linearity range from 5 pg L^?1 to 10 ng L^?1, and the limit of detection (LOD) was 1.72 pg L^?1. Real samples of Larimichthys polyactis, collected from the East China Sea, were analyzed. Recovery was from 82 % to 112 %, and the coefficient of variation (CV) was acceptable. The results were compared with GC–ECD, revealing that the method would be acceptable for providing rapid, semi-quantitative, and reliable test results for making environmental decisions.

Gas chromatography–tandem mass spectrometry analysis of 52 monohydroxylated metabolites of polycyclic aromatic hydrocarbons in hairs of rats after controlled exposure

A method based on gas chromatography–tandem mass spectrometry after derivatization with N-tert-butyldimethylsilyl-N-methyltrifluoroacetamide was developed for the analysis of monohydroxylated polycyclic aromatic hydrocarbons (OH-PAHs) in hair. The method focused on 52 target compounds corresponding to two- to six-ring monohydroxylated metabolites of polycyclic aromatic hydrocarbons (PAHs). The limits of quantification ranged from 0.2 to 50 pg mg^?1. The method was then applied to the analysis of hair samples collected from rats exposed to 12 PAHs at 0.01, 0.1, and 1 mg kg^?1, by intraperitoneal injection, for 28 days. The results of this study confirm that these metabolites can be incorporated in hair after intraperitoneal administration of the corresponding parent compound. Only 20 of the 52 metabolites were actually detected in hair samples and corresponded to nine parent PAHs. The mean concentrations of OH-PAHs in rat hair samples exposed to PAHs at 1 mg kg^?1 ranged from 0.6?±?0.2 pg mg^?1 for 8-hydroxybenzo[b]fluoranthene to 6.7?±?1.0 pg mg^?1 for 1-hydroxypyrene. The results also demonstrated that hair pigmentation has no influence on the concentration of most OH-PAHs. This animal experiment confirmed the incorporation of PAH metabolites in hair and demonstrated that the method was sufficiently sensitive to detect low levels of exposure to PAHs. These results confirmed the usefulness of hair analysis in the biomonitoring of human exposure to PAHs.

A high-throughput method based on microwave-assisted extraction and liquid chromatography–tandem mass spectrometry for simultaneous analysis of amphetamines,ketamine, opiates,and their metabolites in hair

A total sample-preparation and analysis time of 50 min is required for the high-throughput method of hair analysis proposed in this paper. The method is applicable to analysis of drugs commonly used in Asia, and their metabolites—methamphetamine (MA), amphetamine (AMP), methylenedioxymethamphetamine (MDMA), methylenedioxyamphetamine (MDA), ketamine (K), norketamine (NK), dehydronorketamine (DHNK), 6-acetylmorphine (6-AM), morphine (MOR), and codeine (COD). Cut and weighed hair (10 mg) was incubated for 3 min with methanol–trifluoroacetic acid (TFA) during microwave-assisted extraction (MAE) at 700 W. The incubation solution was evaporated, the residue was reconstituted in deionized water–methanol, 99:1 (v/v), and 20 μL was injected on to a core-shell column (50?×?4.6 mm, 2.6 μm particle size) for liquid chromatographic–tandem mass spectrometric (LC–MS–MS) analysis. Gradient elution separation was performed in 8 min at a flow rate of 1 mL min^?1. No signal interfering with any of the analytes was found in fourteen blank hair samples from different sources. The limits of detection and quantification were 0.5 pg mg^?1 and 2.0 pg mg^?1, respectively, for MA, AMP, MDMA, MDA, K, NK, and DHNK, and 2.0 pg mg^?1 and 5.0 pg mg^?1, respectively, for 6-AM, MOR and COD. The linear range was between the LOQ and 1000 pg mg^?1, and the correlation coefficients were all greater than 0.999. Investigation of matrix effects revealed that all the analytes were suppressed by less than 20 % and the standard deviation (SD) was always less than 7 %. Recovery was always greater than 90 % and the SD for each compound was less than 6 %. Precision and accuracy for each analyte were within 15 %. Eight authentic hair specimens from known drug abusers were successfully analyzed. Compared with traditional overnight incubation methods, the rapid 3-min extraction time achieved similar or greater extraction yields. Sample preparation by MAE was a reliable procedure for extraction of the analytes from hair but substantially simpler and faster than other methods.

Chitosan-poly(m-phenylenediamine)@Fe3O4 nanocomposite for magnetic solid-phase extraction of polychlorinated biphenyls from water samples

A extraction medium based on chitosan-poly(m-phenylenediamine) (CS-PPD) @Fe₃O₄ nanocomposite was synthesized by chemical polymerization of m-phenylenediamine in the presence of chitosan coated magnetic nanocomposite, and for the first time, used as the sorbent for the magnetic solid-phase extraction (MSPE) of seven polychlorinated biphenyls (PCB28, PCB52, PCB101, PCB118, PCB138, PCB153, and PCB180) at trace levels in water samples. Gas chromatography-triple quadrupole mass spectrometry (GC-MS/MS) was used for PCBs quantification and detection. Several factors related to MSPE efficiencies, such as type and amount of sorbent, extraction time, sample pH, and desorption conditions were investigated. Under the optimized conditions, an excellent linearity was observed in the range of 1.0–200 ng L^–1 for PCB180, 0.5–200 ng L^–1 for the other six PCBs with the correlation coefficients ranging from 0.9954 to 0.9993. The good recoveries at spiked levels of 10.0, 20.0, and 50.0 ng L^–1 were obtained in the range of 94 %–108 %, and the coefficients of variations were less than 6 %. The proposed method was feasible, rapid, and easy to operate for the trace analysis of the PCBs in local aquaculture water, livestock breeding water, and sewage water samples. Graphical Abstract

Fig. 1 Schematic diagram for the preparation of chitosan–poly(m-phenylenediamine) @Fe₃O₄ nanocomposite.     

A polyaniline-magnetite nanocomposite as an anion exchange sorbent for solid-phase extraction of chromium(VI) ions

This work describes a novel polyaniline-magnetite nanocomposite and its application to the preconcentration of Cr(VI) anions. The material was obtained by oxidative polymerization of aniline in the presence of magnetite nanoparticles. The parameters affecting preconcentration were optimized by a Box-Behnken design through response surface methodology. Extraction time, amount of magnetic sorbent and pH value were selected as the main factors affecting sorption. The sorption capacity of the sorbent for Cr(VI) is 54 mg g^?1. The type, volume and concentration of the eluents, and the elution time were selected as main factors in the optimization study of the elution step. Following sorption and elution, the Cr(VI) ions were reacted with diphenylcarbazide, and the resulting dye was quantified by HPLC with optical detection at 546 nm. The limit of detection is 0.1 μg L^?1, and all the relative standard deviations are <6.3 %. The nanocomposite was successfully applied to the rapid extraction and determination of trace quantities of Cr(VI) ions in spiked water samples. Figure

A schematic procedure of magnetic solid phase extraction     

The Development and Validation of a Stability-Indicating UHPLC-DAD Method for Determination of Perindopril l-Arginine in Bulk Substance and Pharmaceutical Dosage Form

A stability-indicating ultra-high-performance liquid chromatography (UHPLC) method with a diode array detector was developed and validated for the determination of cis/trans isomers of perindopril l-arginine in bulk substance and pharmaceutical dosage form. The separation was achieved on a Poroshell 120 Hilic (4.6 × 150 mm, 2.7 µm) column using a mobile phase composed of acetonitrile–0.1 % formic acid (20:80 v/v) at a flow rate of 1 mL min^?1. The injection volume was 5.0 µL and the wavelength of detection was controlled at 230 nm. The selectivity of the UHPLC-DAD method was confirmed by determining perindopril l-arginine in the presence of degradation products formed during acid–base hydrolysis and oxidation as well as degradation in the solid state, at an increased relative air humidity and in dry air. The method’s linearity was investigated in the ranges 0.40–1.40 µg mL^?1 for isomer I and 0.40–2.40 µg mL^?1 for isomer II of perindopril l-arginine. The UHPLC-DAD method met the precision and accuracy criteria for the determination of the isomers of perindopril l-arginine. The limits of detection and quantitation were 0.1503 and 0.4555 µg mL^?1 for isomer I and 0.0356 and 0.1078 µg mL^?1 for isomer II, respectively.     

Detection of catecholamines in single specimens of groundwater amphipods

Catecholamines play essential roles in several physiological processes in vertebrates as well as in invertebrates. While several studies have shown the presence of these substances in surface water invertebrates, their occurrence in groundwater fauna is unproven. In the present study, the presence of different catecholamines (i.e., noradrenaline, adrenaline, and dopamine) in individual specimens of groundwater amphipods of the genus Niphargus (mostly Niphargus inopinatus) was investigated via two independent analytical methods: HPLC/EcD and UPLC/TOF-MS. Mean values for catecholamine levels were 533 pg mg^?1 fresh weight for noradrenaline, 314 pg mg^?1 for adrenaline, and 16.4 ng mg^?1 for dopamine. The optimized protocol allowed the detection of CAs in single organisms of less than 1 mg fresh weight. Catecholamine concentration patterns in groundwater invertebrates are briefly discussed here with respect to their evolutionary adaptation to an environmentally stable, energy-poor habitat.

Non-isothermal reduction of silica-supported nickel catalyst precursors in hydrogen atmosphere: a kinetic study and statistical interpretation

A series of silica-supported nickel catalyst precursors was synthesized with different SiO₂/Ni mole ratios (0.20, 0.80 and 1.15). Non-isothermal reduction of Ni catalyst precursors was investigated by temperature-programmed reduction at four different heating rates (2, 5, 10 and 20 °C min^?1), in a hydrogen atmosphere. Kinetic parameters (E _a, A) were determined using Friedman isoconversional method. It was found that for all mole ratios, apparent activation energy is practically constant in conversion range of α = 30–70 %. In considered conversion range, the following values of apparent activation energy were found: E _a = 129.5 kJ mol^?1 (SiO₂/Ni = 0.20), E _a = 133.8 kJ mol^?1 (SiO₂/Ni = 0.80) and E _a = 125.0 kJ mol^?1 (SiO₂/Ni = 1.15). Using two special functions (y(α) and z(α)), the kinetic model was determined. It was established that reduction of Ni catalyst precursors with different SiO₂/Ni mole ratios is a complex process and can be described by two-parameter ?esták–Berggren (SB) autocatalytic model. Based on established values of SB parameters for each mole ratio, the possible mechanism was discussed. It was found that for all investigated ratios, the Weibull distribution function fits very well the experimental data, in the wide range of conversions (α = 5–95 %). Based on obtained values of Weibull shape parameter (θ), it was found that experimentally evaluated density distribution functions of the apparent activation energies can be approximated by the unbalanced peaked normal distribution.     

Investigation of volatile metabolites during growth of Escherichia coli and Pseudomonas aeruginosa by needle trap-GC-MS

A new method for the growth-dependent headspace analysis of bacterial cultures by needle trap (NT)-gas chromatography-mass spectrometry (GC-MS) was established. NTs were used for the first time as enrichment technique for volatile organic compounds (VOCs) in the headspace of laboratory cultures. Reference strains of Escherichia coli and Pseudomonas aeruginosa were grown in different liquid culture media for 48 h at 36 °C. In the course of growth, bacterial culture headspace was analysed by NT-GC-MS. In parallel, the abiotic release of volatile organic compounds (VOC) from nutrient media was investigated by the same method. By examination of microbial headspace samples in comparison with those of uninoculated media, it could be clearly differentiated between products and compounds which serve as substrates. Specific microbial metabolites were detected and quantified during the stationary growth phase. P. aeruginosa produced dimethyl sulfide (max. 125 μg L^?1??1) and 2-nonanone (max. 200 μg L^?1), whereas E. coli produced carbon disulfide, butanal and indole (max. 149 mg L^?1). Both organisms produced isoprene. Graphical Abstract

MVOCs produced by P. aeruginosa and E. coli at T = 36 °C in autoclaved LB + TRP medium      

A Rapid Determination of Taurine in Human Plasma by LC

Taurine is an amino acid which is not incorporated into proteins but found in the cytosol of many mammalian cells, in high concentrations (2–30 mM). Increase in plasma taurine concentration has already been reported after surgical trauma, X-radiation, muscle necrosis, carbon tetrachloride-induced liver damage, and paracetamol overdose. Plasma taurine concentration was measured using LC with fluorescence detection following derivatization by o-phtalaldehyde plus 3-mercapto-propionic acid and α-aminobutyric acid as internal standard. Under these conditions the retention time of taurine was 10 min. This method was sensitive enough, to quantify 150 pg mL^?1 and detect 50 pg mL^?1 of taurine ranging normally between 65 and 179 mmol L^?1 (8–22 μg mL^?1). The validated method allowed simple determination of human plasma taurine in pharmacokinetic and biomarker studies.     

Analysis of drug interactions with very low density lipoprotein by high-performance affinity chromatography

High-performance affinity chromatography (HPAC) was utilized to examine the binding of very low density lipoprotein (VLDL) with drugs, using R/S-propranolol as a model. These studies indicated that two mechanisms existed for the binding of R- and S-propranolol with VLDL. The first mechanism involved non-saturable partitioning of these drugs with VLDL, which probably occurred with the lipoprotein’s non-polar core. This partitioning was described by overall affinity constants of 1.2 (±0.3)?×?10⁶ M^?1 for R-propranolol and 2.4 (±0.6)?×?10⁶ M^?1 for S-propranolol at pH 7.4 and 37 °C. The second mechanism occurred through saturable binding by these drugs at fixed sites on VLDL, such as represented by apolipoproteins on the surface of the lipoprotein. The association equilibrium constants for this saturable binding at 37 °C were 7.0 (±2.3)?×?10⁴ M^?1 for R-propranolol and 9.6 (±2.2)?×?10⁴ M^?1 for S-propranolol. Comparable results were obtained at 20 and 27 °C for the propranolol enantiomers. This work provided fundamental information on the processes involved in the binding of R- and S-propranolol to VLDL, while also illustrating how HPAC can be used to evaluate relatively complex interactions between agents such as VLDL and drugs or other solutes.     

A novel ionic liquid-modified organic-polymer monolith as the sorbent for in-tube solid-phase microextraction of acidic food additives

A novel ionic liquid-modified organic-polymer monolithic capillary column was prepared and used for in-tube solid-phase microextraction (SPME) of acidic food additives. The primary amino group of 1-aminopropyl-3-methylimidazolium chloride was reacted with the epoxide group of glycidyl methacrylate. The as-prepared new monomer was then copolymerized in situ with acrylamide and N,N’-methylenebisacrylamide in the presence of polyethylene glycol (PEG)-8000 and PEG-10,000 as porogens. The extraction performance of the developed monolithic sorbent was evaluated for benzoic acid, 3-hydroxybenzoic acid, cinnamic acid, 2,4-dichlorophenoxyacetic acid, and 3-(trifluoromethyl)-cinnamic acid. Such a sorbent, bearing hydrophobic and anion-exchange groups, had high extraction efficiency towards the test compounds. The adsorption capacities for the analytes dissolved in water ranged from 0.18 to 1.74 μg cm^?1. Good linear calibration curves (R ²?>?0.99) were obtained, and the limits of detection (S/N?=?3) for the analytes were found to be in the range 1.2–13.5 ng mL^?1. The recoveries of five acidic food additives spiked in Coca-Cola beverage samples ranged from 85.4 % to 98.3 %, with RSD less than 6.9 %. The excellent applicability of the ionic liquid (IL)-modified monolithic column was further tested by the determination of benzoic acid content in Sprite samples, further illustrating its good potential for analyzing food additives in complex samples.

Rapid screening and detection of XOD inhibitors from S. tamariscina by ultrafiltration LC-PDA–ESI-MS combined with HPCCC

Xanthine oxidase (XOD) catalyzes the metabolism of hypoxanthine and xanthine to uric acid, the overproduction of which could cause hyperuricemia, a risk factor for gout. Inhibition of XOD is a major treatment for gout, and biflavonoids have been found to act as XOD-inhibitory compounds. In this study, ultrafiltration liquid chromatography with photodiode-array detection coupled to electrospray-ionization tandem mass spectrometry (UF-LC-PDA–ESI-MS) was used to screen and identify XOD inhibitors from S. tamariscina. High-performance counter-current chromatography (HPCCC) was used to separate and isolate the active constituents of these XOD inhibitors. Furthermore, ultrahigh-performance liquid chromatography (UPLC) and triple-quadrupole mass spectrometry (TQ-MS) was used to determine the XOD-inhibitory activity of the obtained XOD inhibitors, and enzyme kinetics was performed with Lineweaver–Burk (LB) plots using xanthine as the substrate. As a result, two compounds in S. tamariscina were screened as XOD inhibitors: 65.31 mg amentoflavone and 0.76 mg robustaflavone were isolated from approximately 2.5 g?S. tamariscina by use of HPCCC. The purities of the two compounds obtained were over 98 % and 95 %, respectively, as determined by high-performance liquid chromatography (HPLC). Lineweaver–Burk plot analysis indicated that amentoflavone and robustaflavone were non-competitive inhibitors of XOD, and the IC ₅₀ values of amentoflavone and robustaflavone for XOD inhibition were 16.26 μg mL^?1 (30.22 μmol L^?1) and 11.98 μg mL^?1 (22.27 μmol L^?1), respectively. The IC ₅₀ value of allopurinol, used as the standard, was 7.49 μg mL^?1 (46.23 μmol L^?1). The results reveal that the method for systematic screening, identification, and isolation of bioactive components in S. tamariscina and for detecting their inhibitory activity using ultrafiltration LC–ESI-MS, HPCCC, and UPLC–TQ-MS is feasible and efficient, and could be expected to extend to screening and separation of other enzyme inhibitors. Graphical Abstract

?     

Electrochemical exfoliation and in situ carboxylic functionalization of graphite in non-fluoro ionic liquid for supercapacitor application

Simultaneous electrochemical generation and functionalization of nano-sized graphite from graphite had been carried out in a non-fluoroanion-based ionic liquid, namely, triethylmethylammonium methylsulfate (TEMAMS) containing water and acetonitrile (AN) in different weight ratios. The oxygen-based functional groups attached with the exfoliated material had been identified using Fourier transform infrared spectroscopy (FTIR), and morphological changes were characterized by scanning electron microscopy (SEM) and transmission electron microscopy (TEM). A symmetrical supercapacitor was fabricated using the exfoliated nano-sized graphite, and the influence of surface functionalities on its performance was investigated using electrochemical impedance spectroscopy (EIS), cyclic voltammetry (CV), and galvanostatic charge–discharge cycles (CC). The highest specific capacitance (C _sp) value of 140 F g^?1 at 0.25 A g^?1 was obtained in 1.0 M H₂SO₄, followed by aqueous TEMAMS (125 F g^?1), TEMAMS/acetonitrile (115 F g^?1), and TEMAMS (106 F g^?1) at 0.10 A g^?1.     

Titanium dioxide nanoparticle based solid phase extraction of trace Alizarin Violet,followed by its specrophotometric determination

Nanometer-sized titanium dioxide (nano-TiO₂) is shown to be a viable material for the preconcentration of Alizarin Violet (AV, a common dye and biological stain). In the preconcentration step, a 5-ring cyclic ester is formed between the ortho-dihydroxy groups of AV and two hydroxy groups of the titanic acid on the surface of the nano-TiO₂. Under optimized conditions, the adsorption capacity of nano-TiO₂ is?~?20 μg?·?mg^?1, the adsorption efficiency is 98 %. The adsorbed AV can be eluted with 5 mL of 5 mol?·?L^?1 5-sulfosalicylic acid with an elution efficiency of more than 91.8 %. The preconcentration factor is 50 in case of 250 mL samples. Spectrophotometric determination of AV in the eluate gives a linear calibration plot in the range between 18.8 μg?·?L^?1 and 10 mg?·?L^?1 and a detection limit (3 s; for n?=?11) of 18.8 μg?·?L^?1. The method is simple and fast. It was successfully applied to the analysis of AV in spiked natural waters, and recoveries were found to range between 94.2 and 97.3 %.

Nanometer-sized titanium dioxide is a viable material for the preconcentration of Alizarin Violet (AV), before its spectrophotometrical determination. The method is simple and fast. It was successfully applied to the analysis of AV in spiked natural waters, and recoveries were found to range between 94.2 and 97.3 %.     

Hexafluoroisopropanol-induced coacervation in aqueous mixed systems of cationic and anionic surfactants for the extraction of sulfonamides in water samples

Hexafluoroisopropanol (HFIP)-induced coacervation in aqueous mixed systems of catanionic surfactants of dodecyltrimethylammonium bromide (DTAB) and sodium dodecyl sulfate (SDS) was described in detail, and its application in the extraction of strongly polar sulfonamides (SAs) was investigated. With 10 % (v/v) HFIP inclusion, coacervation formation and two-phase separation occur in a wide range of SDS/DTAB mole ratios (88:12～0:100 mol/mol) and total surfactant concentrations (10～200 mmol/L). The interactions between HFIP and DTAB play an important role in coacervation formation. The HFIP-induced SDS–DTAB coacervation extraction proves to be an efficient method for the extraction and preconcentration of SAs. Both hydrophobic interaction and polar interactions (hydrogen–bond, electrostatic, and π-cation) contribute to the distribution of SAs into coacervate phase. The proposed HFIP-induced SDS–DTAB coacervation extraction combined with HPLC–UV was employed for the extraction and quantitative determination of SAs in environmental water samples. Limits of detection were 1.4～2.5 ng mL^?1. Excellent linearity with correlation coefficients from 0.9990 to 0.9995 was obtained in the concentration of 0.01～10 μg mL^?1. Relative recoveries were in the range of 93.4～105.9 % for analysis of the lake, underground, and tap water samples spiked with SAs at 0.01, 1.0, and 10 μg/mL, respectively. Relative standard deviations were 0.7～3.2 % for intraday precision and 1.3～4.6 % for interday precision (n?=?3). Concentration factors were 17～49 for three water samples spiked with 0.01 μg/mL SAs. The results demonstrate that the proposed extraction method is feasible for the preconcentration and determination of trace SAs in real water samples. Graphical abstract

?