De-acidification of sunflower oil by solvent extraction: (Liquid + liquid) equilibrium data at T = (303.15 and 313.15) K

Short chain alcohols such as ethanol and methanol were used for extraction of oleic acid from sunflower oil. (Liquid + liquid) equilibrium data for the systems (sunflower oil + oleic acid + methanol) and (sunflower oil + oleic acid + ethanol) at T = (303.15 and 313.15) K are reported. The experimental (liquid + liquid) equilibrium data were satisfactorily correlated using the UNIQUAC activity coefficient model to obtain the binary interaction parameters. The experimental and calculated compositions of the equilibrium phases were compared and the relative mean square deviations (RMSD) are reported. The partition coefficients and the selectivity factor of the methanol and ethanol were calculated and presented. The experimental results indicate that increasing the temperature increases the distribution coefficient but decreases the selectivity factor. Our experimental results indicate that a possible alternative to reduce energy consumption is de-acidification of sunflower oil through liquid–liquid extraction by short chain alcohols, as this process is carried out at room temperature.     

Ternary (liquid + liquid) equilibria of the azeotrope (ethyl acetate + 2-propanol) with different ionic liquids at T = 298.15 K

Experimental (liquid + liquid) equilibria involving ionic liquids {1,3-dimethylimidazolium methyl sulfate (MMIM MeSO₄)}, {2-propanol + ethyl acetate + 1-butyl-3-methylimidazolium hexafluorophosphate (BMIM PF₆)} and {2-propanol + ethyl acetate + 1-hexyl-3-methylimidazolium hexafluorophosphate (HMIM PF₆)} were carried out to separate the azeotropic mixture ethyl acetate and 2-propanol. Selectivity and distribution ratio values, derived from the tie-lines data, were presented in order to analyze the best separation solvent in a liquid extraction process. Experimental (liquid + liquid) equilibria data were compared with the correlated values obtained by means of the NRTL, Othmer-Tobias and Hand equations. These equations were verified to accurately correlate the experimental data.     

(Liquid + liquid) equilibria for ternary mixtures of (ethylene glycol + toluene + n-octane)

Tie-line data for ternary systems of (ethylene glycol + toluene + n-octane) at three temperatures (295.15, 301.15, and 307.15) K are reported. The compositions of liquid phases at equilibrium were determined and the results were correlated with the UNIQUAC and NRTL activity coefficient models. The partition coefficients and the selectivity factor of ethylene glycol are calculated and compared to suggest which ethylene glycol is more suitable for extracting of toluene from n-octane. The phase diagrams for the studied ternary mixtures including both the experimental and correlated tie lines are presented. From the phase diagrams and the selectivity factors, it is concluded that ethylene glycol may be used as a suitable solvent in extraction of toluene from n-octane mixtures.     

Measurements of saturated-liquid densities for isobutane at T = (280 to 407) K

Ten measurements of the saturated-liquid density for isobutane were obtained by means of a metal-bellows variable volumometer at T = (280 to 407) K. The mole fraction purity of the isobutane used in the measurements was 0.9999. For the determination of the saturation boundary at each temperature for isobutane, we measured the density data at intervals of about 12 kPa very close to the saturation boundary. The expanded uncertainties (k = 2) in temperature, pressure, and density measurements have been estimated to be less than 3 mK, less than 0.8 kPa, and 0.08%, respectively. After such measurements had been completed, the saturated-liquid density results for each temperature were determined as the point of intersect between the isotherm and our previously determined vapour pressure value. The expanded uncertainties (k = 2) in the present saturated-liquid density data have also been estimated to be less than 0.08%, except the uncertainty of the saturated-liquid density data at T = 400 K being 0.09% (0.31 kg · m⁻³). Based on the present measurements as input data, the saturated-liquid density correlation were also provided for the systematic comparisons between the present measurements and the literature data.     

Solvation model for estimating the properties of (vapour + liquid) equilibrium

A solvation energy relation (SERAS) has been developed for correlating the properties and (vapour + liquid) equilibrium (VLE) of associated systems capable of hydrogen bonding or dipole–dipole interaction. The model clarifies the simultaneous impact of hydrogen bonding, solubility and thermodynamic factors of activity coefficients derived from the UNIFAC-original model. The consistency test has been processed against binary VLE data for six isobaric systems of hydrogen bonding (I to III) and dipole–dipole interaction (IV to VI) types, and two isothermal systems of both types (VII and VIII). Systems II, III, and VIII show negative non-ideal deviations. The reliability analysis has been conducted on the performance of the SERAS model with 5- and 10-parameters. The model matches relatively well with the observed performance, yielding mean error of 9.7% for all the systems and properties considered.     

A study on the liquid–liquid equilibria of 1-alkyl-3-methylimidazolium hexafluorophosphate with ethanol and alkanes

This work demonstrates the ability of the 1-alkyl-3-methylimidazolium hexafluorophosphate to act as an extraction solvent in petrochemical processes for the removal of alkanes from their azeotropic mixture with ethanol. LLE (liquid–liquid equilibrium) of the ternary systems hexane + ethanol + 1-hexyl-3-methylimidazolium hexafluorophosphate (HMIM PF₆) or 1-octyl-3-methylimidazolium hexafluorophosphate (OMIM PF₆) and heptane + ethanol + OMIM PF₆ are carried out at 298.15 K and atmospheric pressure. Experimental liquid–liquid data are correlated by using different equations. The solute distribution ratio and the selectivity, determined from tie-line data, suggest the efficiency of the ILs used as solvents. A comparison with other IL, in terms of solvent capacity, is included. The liquid–liquid extraction process is simulated by using conventional software and the obtained results are shown.     

Osmotic coefficients of aqueous solutions of four ionic liquids at T = (313.15 and 333.15) K

Measurements of osmotic coefficients of BmimCl (1-butyl-3-methylimidazolium chloride), HmimCl (1-hexyl-3-methylimidazolium chloride), MmimMeSO₄ (1,3-dimethylimidazolium methylsulfate), and BmimMeSO₄ (1-butyl-3-methylimidazolium methylsulfate) with water at T = (313.15 and 333.15) K are reported in this work. Vapour pressure and activity data of all the studied binary systems are obtained from experimental data. The osmotic coefficients data are correlated using the extended Pitzer model of Archer and the modified NRTL (MNRTL) model and standard deviations obtained with both models are given too. The parameters obtained with the extended Pitzer model of Archer are used to calculate the mean molal activity coefficients.     

(Liquid + liquid) equilibria for (benzene + cyclohexane + dimethyl sulfoxide) system at T = (298.15 or 303.15) K: Experimental data and correlation

(Liquid + liquid) equilibrium (LLE) data were measured experimentally at T = (298.15 or 303.15) K and atmospheric pressure for the (benzene + cyclohexane + dimethyl sulfone (DMSO)) system. The Othmer–Tobias equation was applied to verify the reliability of the data. Based on the data, the selectivity of DMSO was estimated and compared with that of ionic liquids. The highest selectivity coefficient of DMSO can reach beyond 14, which means it is able to compete with some ionic liquids and it would be a good extractant to separate benzene from cyclohexane. At the same time, the NRTL model was used to correlate the data and the results show that the model agrees on the experimental data very well.     

Separation of aromatic hydrocarbons from alkanes using ammonium ionic liquid C2NTf2 at T = 298.15 K

(Liquid + liquid) equilibrium data are presented for four ternary systems of an alkane, or aromatic compound and ethyl(2-hydroxyethyl)dimethylammonium bis{(trifluomethyl)sulfonyl}imide (C₂NTf₂) at 298.15 K: [hexane + benzene + C₂NTf₂], [hexane + p-xylene + C₂NTf₂], and [hexane, or octane + m-xylene + C₂NTf₂]. The separation of aromatic hydrocarbons (benzene, or p-xylene, or m-xylene) from aliphatic hydrocarbons (hexane, or octane) is investigated by extraction with the ammonium ionic liquid. Selectivities and distribution ratios are discussed for these mixtures at constant temperature. The data were analysed and compared to those previously reported for other ionic liquids and especially for the system {hexane + benzene + [EMIM][NTf₂]}. The nonrandom two liquid NRTL model was successfully used to correlate the experimental tie-lines and to calculate the phase compositions of the ternary systems.     

Isothermal vapor–liquid equilibrium at 333.15 K and excess molar volumes at 298.15 K for the ternary system di-isopropyl ether + n-propyl alcohol + toluene and its binary subsystems

Isothermal vapor–liquid equilibrium data at 333.15 K are reported for the ternary system di-isopropyl ether (DIPE) + n-propyl alcohol + toluene and the binary subsystems DIPE + n-propyl alcohol, DIPE + toluene and n-propyl alcohol + toluene by using headspace gas chromatography. The excess molar volumes at 298.15 K for the same binary and ternary systems were also determined by directly measured densities. The experimental binary and ternary vapor–liquid equilibrium data were correlated with different G^E models and the excess molar volumes were correlated with the Redlich–Kister equation for the binary systems and the Cibulka equation for the ternary system, respectively.     

Determination and correlation of liquid–liquid equilibria for the (water + carboxylic acid + dimethyl maleate) ternary systems at T = 298.2 K

(Liquid–liquid) equilibrium (LLE) data for the ternary systems of {water + carboxylic acid (formic, acetic, propionic or butyric acid) + dimethyl maleate} were measured at T = 298.2 K and atmospheric pressure. Selectivity values for solvent separation efficiency were derived from the tie-line data. A comparison of the extracting capabilities of the solvent was made with respect to distribution coefficients, separation factors, and solvent-free selectivity bases. The reliability of the data was ascertained from Othmer–Tobias plots. The experimental data were correlated using the UNIQUAC and NRTL (α = 0.2) equations, and the binary interaction parameters were reported. The phase diagrams for the ternary mixtures including both the experimental and calculated tie-lines were presented.     

(Liquid + liquid) equilibrium of (imidazolium ionic liquids + organic salts) aqueous two-phase systems at T = 298.15 K and the influence of salts and ionic liquids on the phase separation

(Liquid + liquid) equilibrium for the {1-ethyl-3-methylimidazolium tetrafluoroborate ([C₂mim]BF₄)/1-propyl-3-methylimidazolium tetrafluoroborate ([C₃mim]BF₄) + organic salt + H₂O} aqueous two-phase systems (ATPSs) have been experimentally ascertained at T = 298.15 K. Three empirical equations were used to correlate the binodal data. On the basis of the empirical equation of the binodal curve with the highest accuracy and lever rule, the (liquid + liquid) equilibrium data were calculated by MATLAB. The reliability of the tie line compositions was proved by the empirical correlation equations given by the Othmer–Tobias and Bancroft equations. The effective excluded volume (EEV) values obtained from the binodal model for these systems were determined. The EEV and the binodal curves plotted in molality both indicate that the salting-out abilities of the four salts follow the order: Na₃C₆H₅O₇ > (NH₄)₃C₆H₅O₇ > Na₂C₄H₄O₄ ≈ Na₂C₄H₄O₆, while the phase-separation abilities of the investigated ILs are in the order of [C₃mim]BF₄ > [C₂mim]BF₄. In the systems investigated, the effect of salts on the phase-forming capability was also evaluated in the shape of the salting-out coefficient obtained from fitting the tie-line data to a Setschenow-type equation. The phase-forming ability increases with the increase of salting-out coefficient.     

(Liquid + liquid) equilibria of (heptane,or hexane,or cyclohexane + toluene + 1,3-dimethyl-2-imidazolidinone) ternary systems at T = 298.15 K

Experimental (liquid + liquid) equilibrium data for the mixtures of (heptane, or hexane, or cyclohexane + toluene + 1,3-dimethyl-2-imidazolidinone) were determined at T = 298.15 K and P = 101.3 kPa. The solubility (binodal) curves and tie-line end compositions are reported for the related mixtures and presented as complete phase diagrams. Distribution coefficients and separation factors were evaluated for the immiscibility region. The reliability of the experimental tie-line results was verified by using the Othmer–Tobias correlation. The experimental tie-line data were correlated by UNIQUAC model, which gave satisfactory representation for the systems. It was observed that the separation of toluene from cyclohexane is easier to achieve than from heptane and hexane.     

Activity coefficients at infinite dilution measurements for organic solutes in the ionic liquid 1-hexyl-3-methyl-imidazolium bis(trifluoromethylsulfonyl)-imide using g.l.c. at T = (298.15, 313.15, and 333.15) K

The activity coefficients at infinite dilution, (where 1 refers to the solute and 3 to the solvent), for both polar and non-polar solutes (alkanes, alk-1-enes, alk-1-ynes, cycloalkanes, benzene, carbon tetrachloride, and methanol) in the ionic liquid 1-hexyl-3-methyl-imidazolium bis(trifluoromethylsulfonyl)-imide [HMIM][Tf₂N] at three temperatures T = (298.15, 313.15, and 333.15) K have been determined by gas-liquid chromatography. The interaction at the gas-liquid interface between the solutes and the solvent was examined by varying solvent liquid loading on the column. Corrected retention values, taking carrier gas and solute imperfections into account, were determined and used to calculate the activity coefficients at infinite dilution. The results have been used to predict the solvent potential for the hexane/benzene separation from calculated selectivity values. The results were compared to for similar systems found in the literature in an attempt to understand the effect of the nature of the cation and anion has on solute-solvent interactions.The partial molar excess enthalpies at infinite dilution values were calculated from the experimental values obtained over the temperature range.     

Direct quantum mechanical calculation of the F + H2 → HF + H thermal rate constant

Accurate full-dimensional quantum mechanical thermal rate constant values have been calculated for the F+H₂→HF+H reaction on the Stark–Werner ab initio potential energy surface. These calculations are based on a flux correlation functions and employ a rigorous statistical sampling scheme to account for the overall rotation and the MCTDH scheme for the wave packet propagation. Our results shed some light on discrepancies on the thermal rate found for previous flux correlation based calculations with respect to accurate reactive scattering results. The resonance pattern of the all-J cumulative reaction probability is analyzed in terms of the partial wave contributions.     

(Liquid + liquid) equilibria of (water + propionic acid + methyl isoamyl ketone or diisobutyl ketone or ethyl isoamyl keton) at T = 298.2 K

(Liquid + liquid) equilibrium (LLE) data for (water + propionic acid + solvent) were measured at T = 298.2 K and atmospheric pressure. The solvents were methyl isoamyl ketone (5-methyl-2-hexanone), ethyl isoamyl ketone (5-methyl-3-heptanone) and diisobutyl ketone. The tie-line data were correlated by means of the NRTL and UNIQUAC equation, and compared with results predicted by the UNIFAC method. A comparison of the extracting capabilities of the solvents was made with respect to distribution coefficients, separation factors, and solvent free selectivity bases.