复二次B样条曲线

本文在复平面单位圆弧上引进了复二次Ｂ样条曲线，讨论了它的一些几何性质．实质上它是分段帕斯卡蜗线段的Ｃ１合成曲线．调整控制点可使某段曲线为圆孤．     

一类带参B样条曲线的形状分析

利用基于包络理论与拓扑映射的方法对一类带形状参数的B样条曲线进行了形状分析,得出其形状条件完全分布图,图中各区域分别对应于曲线的奇、拐点条件和凸性条件;并讨论了各形状参数对分布图的影响.     

带形状参数控制的三次B样条曲线曲面的光顺

三次B样条曲线是一种广泛应用于计算机辅助几何设计中的非常重要的曲线.本文在以曲线的最小应变能作为衡量曲线光顺性的基础上,采用带调节控制参数的方法分别对三次B样条曲线和双三次B样条曲面进行了光顺处理.由所提供的方法以及实例可以看出,本方法可在曲线曲面光顺的基础上通过修改参数大小以达到控制曲线曲面形状的目的,且修改后的点的位置与原坏点的距离是由参数的大小控制决定的,这样就使得我们的光顺处理可以控制在数据测量的误差范围内.     

局部形状可调整的三次有理B样条插值曲线

利用三次非均匀有理B样条,给出了一种构造局部插值曲线的方法,生成的插值曲线是C2连续的.曲线表示式中带有一个局部形状参数,随着一个局部形状参数值的增大,所给曲线将局部地接近插值点构成的控制多边形.基于三次非均匀有理B样条函数的局部单调性和一种保单调性的准则,给出了所给插值曲线的保单调性的条件.     

带两个形状参数的五次Bézier曲线的扩展

给出了一组含有两个形状参数α,β的六次多项式基函数,是五次Bernstein基函数的扩展,分析了这组基的性质;基于这组基定义了带两个形状参数的多项式曲线,所定义的曲线具有五次Bézier曲线的性质,改变参数α,β的取值,曲线具有更灵活的形状可调性,而且能向上或从两侧逼近控制多边形.另外,经典的五次Bézier曲线和有关文献中带一个形状参数的曲线均是该文所定义曲线的特例.实例表明,定义的曲线为曲线/曲面的设计提供了一种有效的方法.     

带两个形状参数的四次Bézier曲线的扩展

给出了一组含有两个形状参数α,β的四次多项式基函数,是四次Bernstein基函数的扩展,分析了这组基的性质;基于这组基定义了带两个形状参数的多项式曲线,所定义的曲线不仅保留了四次Bézier曲线一些实用的几何特征,而且具有形状的可调性,在控制多边形不变的情况下,改变参数α,β的取值,可以生成不同的逼近控制多边形的曲线;通过分析该曲线与四次Bézier曲线之间的关系,给出了α和β的几何意义,并利用Bézier曲线递归分割算法给出了这种曲线的几何作图法,同时还讨论了曲线间的拼接问题.     

一类平面B—样条曲线的形状分类

本文是[1]的继续,利用[2]中的方法,给出了当[1]中曲线为平面曲线时的奇拐点分布。但不同于[1],这里直接用曲线的控制多边形的边向量来判断。设4阶(n_1,n_2)次平面B样条曲线段为     

带一个形状参数的有理三次三角Bézier曲线

构造了带一个形状参数的有理三次三角Bézier曲线,它不但具有传统三次有理Bézier曲线的几何性质,而且比传统有理Bézier曲线具有更灵活的形状调整能力.讨论了两段有理三次三角Bézier曲线的G~1和C~2拼接条件,并给出了这类曲线的应用.     

带两个形状参数的同次Bézier曲线

构造了一种带两个形状参数的Bézier型曲线,并研究了该曲线的性质、形状参数对曲线的影响及曲线的拼接.所提出的曲线是多项式Bezier曲线的一种同次新扩展,不仅具有传统Bézier曲线的诸多性质,而且可通过修改两个形状参数的取值对其形状进行调节.由于所提出的曲线是一种带有形状参数且与传统Bézier曲线具有相似性质的同次多项式模型,因此比现有的一些带形状参数的Bézier型曲线更有优势.     

带形状参数的T-Bézier曲线

给出了n阶带形状参数的三角多项式T-Bézier基函数.由带形状参数的三角多项式T-Bézier基组成的带形状参数的T-Bézier曲线,可通过改变形状参数的取值而调整曲线形状,随着形状参数的增加,带形状参数的T-Bézier曲线将接近于控制多边形,并且可以精确表示圆、螺旋线等曲线.阶数的升高,形状参数的取值范围将扩大.     

Shape analysis of cubic trigonometric Bézier curves with a shape parameter

For the cubic trigonometric polynomial curves with a shape parameter (TB curves, for short), the effects of the shape parameter on the TB curve are made clear, the shape features of the TB curve are analyzed. The necessary and sufficient conditions are derived for these curves having single or double inflection points, a loop or a cusp, or be locally or globally convex. The results are summarized in a shape diagram of TB curves, which is useful when using TB curves for curve and surface modeling. Furthermore the influences of shape parameter on the shape diagram and the ability for adjusting the shape of the curve are shown by graph examples, respectively.     

周期B样条基转换矩阵的表示和计算

周期B样条基以一种简洁的形式表示闭B样条曲线.周期B样条基转换矩阵为闭B样条曲线及相关曲面的不同表示间的转换提供了一个数学模型.本文给出了周期B样条基转换矩阵的存在性条件,给出并证明了周期B样条基转换矩阵的一个简单的递归表示式.在此基础上,本文进一步给出了周期B样条基转换矩阵的计算公式和高效算法.周期B样条基转换矩阵为闭B样条曲线的节点插入、升阶、节点删除和降阶等基本运算提供了一个统一而简单的解决方法,本文给出了一些应用例子.     

Trigonometric variable shape parameter and exponent strategy for generalized multiquadric radial basis function approximation

The generalized multiquadric radial basis function (φ_j=[(x-x_j)²+c²]^β) has the exponent β and shape parameter c that play an important role in the accuracy of the approximation. In this study, we present a trigonometric variable shape parameter and exponent strategy and apply it to function interpolations and linear boundary value problems. Several numerical experiments with the uniformly spaced nodes show that the inverse multiquadric radial basis function (β = −0.5) with the trigonometric variable shape parameter c strategy results in the best accuracy for the one-dimensional interpolations; the trigonometric variable shape parameters and exponent strategy produces the best accuracy for the two-dimensional interpolations and linear boundary value problems. For the non-uniformly spaced nodes, the random variable shape parameter c and exponent β strategy produces the best accuracy for the two-dimensional boundary value problem.     

Isoperimetric curves on hyperbolic surfaces

Least-perimeter enclosures of prescribed area on hyperbolic surfaces are characterized.

     

Constructing C3 shape preserving interpolating space curves

We present a method for constructing shape-preserving C ³ interpolants in R ³. The resulting curve is obtained by adding a polynomial perturbation of high degree to a curve which is shape-preserving but not sufficiently smooth. The degree of the perturbed curve is selected in order to maintain the shape properties of the basic curve.     

Approximate merging of B-spline curves and surfaces

Applying the distance function between two B-spline curves with respect to the L2 norm as the approximate error, we investigate the problem of approximate merging of two adjacent B-spline curves into one B-spline curve. Then this method can be easily extended to the approximate merging problem of multiple B-spline curves and of two adjacent surfaces. After minimizing the approximate error between curves or surfaces, the approximate merging problem can be transformed into equations solving. We express both the new control points and the precise error of approximation explicitly in matrix form. Based on homogeneous coordinates and quadratic programming, we also introduce a new framework for approximate merging of two adjacent NURBS curves. Finally, several numerical examples demonstrate the effectiveness and validity of the algorithm.     

Design of accelerated life test sampling plans with a nonconstant shape parameter

Accelerated life test sampling plans (ALTSPs) provide information quickly on the lifetime distribution of products by testing them at higher-than-usual stress level to induce early failures and reduce the testing efforts. In the traditional design of ALTSPs for Weibull distribution, it is assumed that the shape parameter remains constant over all stress levels. This paper extends the existing design of ALTSPs to Weibull distribution with a nonconstant shape parameter and presents two types of ALTSPs; time-censored and failure-censored. Optimum ALTSPs which satisfy the producer’s and consumer’s risk requirements and minimize the asymptotic variance of the test statistic for deciding the lot acceptability are obtained. The properties of the proposed ALTSPs and the effects of errors in pre-estimate of the design parameters are also investigated.     

Changeable degree spline basis functions

A B-spline basis function is a piecewise function of polynomials of equal degree on its support interval. This paper extends B-spline basis functions to changeable degree spline (CD-spline for short) basis functions, each of which may consist of polynomials of different degrees on its support interval. The CD-spline basis functions possess many B-spline-like properties and include the B-spline basis functions as subcases. Their corresponding parametric curves, called CD-spline curves, are like B-spline curves and also have many good properties. If we use the CD-spline basis functions to design a curve made up of polynomial segments of different degrees, the number of control points may be decreased.     

一元双曲分形插值

本文讨论了一元双曲分形插值,得到了二种一元双曲分形插值函数的构造方法,文「２」「３」「４」有关结论是它的特殊情况。