FT-IR, NIR-FT-Raman and gas phase infrared spectra of 3-aminoacetophenone by density functional theory and ab initio Hartree-Fock calculations

The gas phase infrared spectrum of 3-aminoacetophenone (3AAP) was measured in the range 5000-500cm(-1) and with a resolution of 0.5cm(-1). The Fourier transform Raman (FT-Raman) and Fourier transform infrared (FT-IR) spectra of 3AAP were recorded in the solid phase. Geometry optimizations were done without any constraint and several thermodynamic parameters were calculated for the minimum energy conformer at ab initio and density functional theory (DFT) levels invoking 6-311G(2df 2p) basis set and the results are compared with the experimental values. Harmonic-vibrational wavenumber was also calculated for the minimum energy conformer at ab initio and DFT levels using 6-31G(d,p) basis set and the results are compared with related molecules. With the help of specific scaling procedures, the observed vibrational wavenumbers in gas phase, FT-IR and FT-Raman spectra were analyzed and assigned to different normal modes of the molecule. Most of the modes have wavenumbers in the expected range, the error obtained was in general very low. The appropriate theoretical spectrogram for the FT-IR spectra of the title molecule is also constructed.     

An experimental and theoretical study of molecular structure and vibrational spectra of 2-chloronicotinic acid by density functional theory and ab initio Hartree–Fock calculations

In this work, the Fourier transform Raman and Fourier transform infrared spectra of 2-chloronicotinic acid (2-CNA) are recorded in the solid phase. The molecular geometry, vibrational frequencies, infrared intensities and Raman scattering activities of 2-CNA in ground state have been calculated by using ab initio Hartree–Fock (HF) and density functional (B3LYP and B3PW91) methods with 6-31G(d) and 6-311G(d) basis sets level. On the basis of the comparison between calculated and experimental results and the comparison with related molecule, assignments of fundamental vibrational modes are examined. The optimized geometric parameters (bond lengths and bond angles) obtained by using HF show the best agreement with the experimental values of 2-CNA. Comparison of the observed fundamental vibrational frequencies of 2-CNA and calculated results by density functional (B3LYP and B3PW91) and Hartree–Fock methods indicates that B3LYP is superior to the scaled Hartree–Fock and B3PW91 approach for molecular vibrational problems.     

Vibrational spectra and potential energy distributions for 4,5-dichloro-3-hydroxypyridazine by density functional theory and normal coordinate calculations

The solid phase FT-IR and FT-Raman spectra of 4,5-dichloro-3-hydroxypyridazine have been recorded in the regions 4000-400 cm(-1) and 3500-100 cm(-1), respectively. The spectra were interpreted with the aid of normal coordinate analysis following a full structure optimization and force field calculations based on the density functional theory (DFT) using the standard B3LYP/6-31G* and B3LYP/6-311+G** method and basis set combinations. The DFT force field transformed to natural internal coordinates was corrected by a well-established set of scale factors that were found to be transferable to the title compound. The IR and Raman spectra were predicted theoretically and compared with the experimental spectra.     

Vibrational spectrum of BiH3: Six-dimensional variational calculations on high-level ab initio potential energy surfaces

We report a theoretical study of the ground electronic state of BiH₃. The potential energy surface (PES) is obtained from coupled cluster CCSD(T) calculations with a large basis set (289 contracted Gaussian functions). The previously available quartic force field (P4) is extended by adding the dominant quintic and sextic stretching terms to yield improved potential functions in symmetry coordinates (P6) and Morse-type coordinates (M4). Second-order rovibrational perturbation calculations on the P4-PES and full variational calculations on the P6-PES and M4-PES yield almost identical vibrational term values which is rationalized by considering the local mode behavior of BiH₃ and the Morse-type character of the M4-PES. The remaining deviations between the computed and observed vibrational term values must thus be caused by imperfections in the CCSD(T) surface. A refinement of this ab initio surface by a restrained fit to experimental data allows an essentially perfect reproduction of the observed vibrational term values. Variational calculations on this refined surface provide predictions for several overtone and combination bands that have not yet been observed. Dedicated to Hermann Stoll on the occasion of his 60th birthday     

Ab initio calculations on the molecular structure of fluorocyanopolyynes

The molecular structure of the first three members of the fluorocyanopolyynes was studied by ab initio Hartree-Fock calculations with a polarized double zeta basis set and at MP2 level with the same basis set. Alternating triple and single bonds were found; a theoretical estimate of rotational constants and dipole moments was performed and a comparison with the available experimental data was made. An analysis of the theoretical vibrational frequencies of the title compounds was carried out.     

Vibrational spectra, conformations, ab initio calculations and vibrational assignments of 3-pentyn-2-ol

The infrared spectra of 3-pentyn-2-ol, CH₃CCCH(OH)CH₃, have been recorded as a vapour and liquid at ambient temperature, as a solid at 78 K in the 4000–50 cm⁻¹ range and isolated in an argon matrix at ca. 5 K. Infrared spectra of the solid phase at 78 K were obtained before and after annealing to temperatures of 120 and 130 K. The IR spectra of the solid were quite similar to that of the liquid.

Raman spectra of the liquid were recorded at room temperature and at various temperatures between 295 and 153 K. Spectra of an amorphous and annealed solid were recorded at 78 K. In the variable temperature Raman spectra, some bands changed in relative intensity and were interpreted in terms of conformational equilibria between the three possible conformers. Complete assignments were made for all the bands of the most stable conformer in which OH is oriented anti to C₁(a_Me). From various bands assigned to a second conformer in which OH is oriented anti to H_gem(a_H), the conformational enthalpy differences was found to be between 0.4 and 0.8 kJ mol⁻¹. The highest energy conformer with OH anti to C₃(a_C) was not detected.

Quantum-chemical calculations have been carried out at the MP2 and B3LYP levels with a variety of basis sets. Except for small basis set calculations for which the a_H conformer had slightly lower energy, all the calculations revealed that a_Me was the low energy conformer. The B3LYP/cc-pVTZ calculations suggested the a_Me conformer as more stable by 0.8 and 8.3 kJ mol⁻¹ relative to a_H an a_C, respectively. Vibrational wavenumbers and infrared and Raman band intensities for two of the three conformers are reported from B3LYP/cc-pVTZ calculations.     

Ab initio and DFT calculations for the structure and vibrational spectra of cyclopentene and its isotopomers

Ab initio calculations using the MP2/cc-pVTZ basis set do an excellent job of predicting the inversion barrier (247 vs. 232 cm⁻¹) and dihedral angle (26°) of cyclopentene. DFT calculations also do an excellent job of predicting the vibrational frequencies of the d₀, d₁, d₄, and d₈ isotopomers. They have also allowed the reassignments of several of the vibrational frequencies.     

Raman and infrared spectra, conformational stability, barriers to internal rotation, vibrational assignment, and ab initio calculations of 3-methyl-3-butenenitrile

The Raman (3500-30 cm⁻¹) spectra of liquid and solid and the infrared (3500-40 cm⁻¹) spectra of gaseous and solid 3-methyl-3-butenenitrile, CH₂C(CH₃)CH₂CN, have been recorded. Both cis and gauche conformers have been identified in the fluid phases but only the cis form remains in the solid. Variable temperature (−55 to −100 °C) studies of the infrared spectra of the sample dissolved in liquid xenon have been carried out. From these data, the enthalpy difference has been determined to be 163±16 cm⁻¹ (1.20±0.19 kJ mol⁻¹), with the cis conformer the more stable rotamer. It is estimated that there is 48±2% of the gauche conformer present at  25°C. A complete vibrational assignment is proposed for the cis conformer based on infrared band contours, relative intensities, depolarization ratios and group frequencies. Several of the fundamentals for the gauche conformer have also been identified. The vibrational assignments are supported by normal coordinate calculations utilizing ab initio force constants. Complete equilibrium geometries have been obtained for both rotamers by ab initio calculations employing the 6-31G(d), 6-311G(d,p), 6-311+G(d,p) and 6-311+G(2d,2p) basis sets at the levels of restricted Hartree-Fock (HF) and/or Møller-Plesset perturbation theory to the second order (MP2). Only with the 6-311G(2d,2p) and 6-311G(2df,2pd) basis sets with or without diffuse functions is the cis conformer predicted to be more stable than the gauche form. The potential energy terms for the conformational interchange have been obtained at the MP2(full)/6-311+G(2d,2p) level, and compared to those obtained from the experimental data. The results are discussed and compared to the corresponding quantities obtained for some similar molecules.     

Density functional calculations of vibrational wavenumbers, ring puckering, and asymmetric CHO potential functions for cyclobutanecarboxaldehyde: comparative study between theoretical and experimental spectra

The structural parameters and energies of the trans-equatorial and gauche-equatorial conformers of cyclobutanecarboxaldehyde c-C₄H₇–CHO were investigated by quantum mechanical DFT-B3LYP (Density Functional Theory-Becke 3 exchange and Lee-Yang–Parr correlation functional) calculations using 6-311G^** basis set. The potential functions for the CHO asymmetric torsion in the equatorial molecule and for the ring puckering inversion were derived. The vibrational wavenumbers were calculated and the potential energy distributions PED among the symmetry coordinates of the normal modes were computed for the two stable conformers of the molecule. The vibrational assignments on the basis of the calculated PED values were compared to the reported ones from experimental data. The vibrational infrared and Raman spectra of the mixture of the trans-equatorial and gauche-equatorial were plotted and the line intensities were compared to the corresponding experimental ones.     

Geometry,Vibrational and NMR Spectra of Icosahedral 1-Methylazacloso-dodecaborane

Geometry, vibrational and NMR spectra of the icosahedral aza-closo-dodecaborane MeNB₁₁H₁₁ are calculated by ab initio methods. The results are compared with experimental data. They are in accord with local C_5v symmetry of the cluster unit and local C_3v symmetry of the methyl group. The boron atoms B7–B11 are coupled to B12 by the small constant ¹J (¹¹B, ¹¹B) = 12 Hz.     

Vibrational spectra and density functional study of propylgermane

Raman and infrared spectra of propylgermane, CH₃CH₂CH₂GeH₃, and its Ge-deuterated analog, CH₃CH₂CH₂GeD₃, were investigated in their gaseous, liquid and solid states. The normal coordinate treatment was carried out by density functional theory (DFT) calculation, using B3LYP/6-31G^* and 6-311++G^** basis sets, and the corresponding fundamental vibrations were assigned. The trans (T) and gauche (G) forms around the central C–C bond coexisted in the gaseous and liquid states and only the T form existed in the solid state. From the temperature dependent measurements of the Raman spectra in the liquid state, the enthalpy difference was found to be ΔH(T−G)=−0.36±0.02 kcalmol⁻¹ with the T form being more stable. The energy differences between the isomers obtained by DFT calculations were ΔE(T−G)=−0.46 kcalmol⁻¹ and ΔE(T−G)=−0.87 kcalmol⁻¹ by the 6-31G^* basis set and 6-311++G^** basis set, respectively.     

Analysis of vibrational spectra of 2 and 3-methylpiperidine based on density functional theory calculations

The experimental and theoretical vibrational spectra of 2 and 3-methylpiperidine (abbreviated as 2-MP and 3-MP) were studied. The FT-Infrared spectra of 2-MP and 3-MP molecules were recorded in the liquid phase. The structural and spectroscopic analysis of the title molecules were made by using density functional harmonic calculations. For the title molecules, only one form was found most stable structure by using B3LYP level with the 6-311G (d,p) basis set. Selected experimental bands were assigned and characterized based on the scaled theoretical wave numbers by their total energy distribution (TED).     

Theoretical modeling of infrared spectra of benzoic acid and its deuterated derivative

Theoretical simulation of the ν_s stretching band is presented for benzoic acid and its OD derivative at 300 K. The simulation takes into account an adiabatic coupling between the high-frequency O–H(D) stretching and the low-frequency intermolecular OO stretching modes, linear and quadratic distortions of the potential energy for the low-frequency vibrations in the excited state of the O–H(D) stretching vibration, resonance interaction between the two hydrogen bonds in the dimer, and Fermi resonance between the fundamental ν OH(D) stretching and the overtone of the δ O–H(D) bending vibrations.

Infrared, far-infarared, Raman and low-frequency Raman spectra of the polycrystalline benzoic acid and its deuterated form have been measured. The geometry and experimental frequencies are compared with the results of our B3LYP/6-311++G** and B3LYP/cc-pVTZ calculations.     

Infrared and Raman spectra, ab initio calculations and vibrational assignment for 3-fluoro-1-butyne

The infrared (3500-80 cm⁻¹) and Raman (3500-20 cm⁻¹) spectra of 3-fluoro-1-butyne, CH₃CHFCCH, have been recorded for the gas and solid. Additionally, the Raman spectrum of the liquid has also been recorded to aid in the vibrational assignment. Ab initio electronic structure calculations of energies, geometrical structures, vibrational frequencies, infrared intensities, Raman activities and the potential energy function for the methyl torsion have been calculated to assist in the interpretation of the spectra. The fundamental torsional mode is observed at 251 cm⁻¹ with a series of sequence peaks falling to lower frequency. The three-fold methyl torsional barrier is calculated to be 1441 ± 20 cm⁻¹ (4.12 ± 0.06 kcal mol⁻¹) where the uncertainty is partly due to the uncertainty in values of the V₆ term. A complete vibrational assignment is proposed based on band contours, relative intensities, and ab initio predicted frequencies. Several fundamentals are significantly shifted in the condensed phases compared to values in the vapor state.     

Determination of vibrational parameters of methanol from matrix-isolation infrared spectroscopy and ab initio calculations. Part 2 – Theoretical treatment including a perturbative approach of the resonances within the methyl group

Ab initio calculations of the potential energy surface of methanol have been developed for the determination of vibrational parameters and their comparison with vibrational data reported in the first part of this work. The strong resonances between the methyl bending and stretching modes, giving rise to polyads of levels P_n in the ranges 3000–2800 (P₂), 4500–4250 (P₃) and 6000–5600 cm⁻¹ (P₄), have been treated by solving for each polyad two Hamiltonian matrices containing off-diagonal terms including both Fermi and Darling-Dennison anharmonic contributions. These terms were calculated from the ab initio determination of the potential energy surface developed up to the quartic terms using the Möller–Plesset 2 method. The choice of the basis set was made to minimize the problem of divergence of the Darling-Dennison constants. Their determination requires however the omission of the terms in which the difference between the harmonic frequencies of the symmetrical methyl stretching and the sum of the two A′ bendings (ω₃–ω₄–ω₅) appears in the denominator. Then, by adjustment of the diagonal elements of the Hamiltonian matrices, it becomes possible to propose a realistic assignment of the matrix spectra.     

The vibrational and NMR spectra,conformations and ab initio calculations of aminomethylene,propanedinitrile and itsN-methyl derivatives

The IR and Raman spectra of aminomethylene propanedinitrile (AM) [H₂N-CH=C(CN)₂], (methylamino)methylene propanedinitrile (MAM) [CH₃NH-CH=C(CN)₂] and (dimethylamino)methylene propanedinitrile (DMAM) [(CH₃)₂N-CH=C(CN)₂] as solids and solutes in various solvents have been recorded in the region 4000-50 cm^–1. AM and DMAM can exist only as one conformer. From the vibrational and NMR spectra of MAM in solutions, the existence of two conformers with the methyl group orientedanti andsyn toward the double C=C bond were confirmed. The enthalpy difference H ⁰ between the conformers was measured to be 3.7±1.4 kJ mol^–1 from the IR spectra in acetonitrile solution and 3.4±1.1 kJ mol^–1 from the NMR spectra in DMSO solution. Semiempirical (AM1, PM3, MNDO, MINDO3) and ab initio SCF calculations using a DZP basis set were carried out for all three compounds. The calculations support the existence of two conformersanti andsyn for MAM, withanti being 7.8 kJ mol^–1 more stable thansyn from ab initio and 8.6, 13.4, 11.6, and 10.8 kJ mor^–1 from AM1, PM3, MNDO, and MINDO3 calculations, respectively. Finally, complete assignments of the vibrational spectra for all three compounds were made with the aid of normal coordinate calculations employing scaled ab initio force constants. The same scale factors were optimized on the experimental frequencies of all three compounds, and a very good agreement between calculated and experimental frequencies was achieved.     

Quantum chemical determination of molecular geometries and interpretation of FTIR and Raman spectra for 2,3,4-and 2,3,6-tri-fluoro-benzonitriles

Raman and FTIR spectra for 2,3,4- and 2,3,6-tri-fluoro-benzonitriles have been recorded in the regions 50–4000 cm⁻¹ and 400–4000 cm⁻¹, respectively. Measurement of depolarization ratios for the Raman lines has also been made. Optimized geometrical parameters, charge distributions and vibrational wavenumbers were calculated using ab initio quantum chemical method. Normal coordinate analysis has also been carried out to help assign the fundamentals of these molecules. Each vibration has been assigned using observed wavenumbers in the IR and Raman spectra and their relative intensities, depolarization ratios of the Raman lines, the calculated frequencies, vector displacements and potential energy distributions (PEDs).     

Far infrared spectra, conformational equilibria, vibrational assignments, ab initio calculations and structural parameters for 2-bromoethanol

The far infrared spectrum from 370 to 50 cm⁻¹ of gaseous 2-bromoethanol, BrCH₂CH₂OH, was recorded at a resolution of 0.10 cm⁻¹. The fundamental O–H torsion of the more stable gauche (Gg′) conformer, where the capital G refers to internal rotation around the C–C bond and the lower case g to the internal rotation around the C–O bond, was observed as a series of Q-branch transitions beginning at 340 cm⁻¹. The corresponding O–H torsional modes were observed for two of the other high energy conformers, Tg (285 cm⁻¹) and Tt (234 cm⁻¹). The heavy atom asymmetric torsion (rotation around C–C bond) for the Gg′ conformer has been observed at 140 cm⁻¹. Variable temperature (−63 to −100°C) studies of the infrared spectra (4000–400 cm⁻¹) of the sample dissolved in liquid xenon have been recorded. From these data the enthalpy differences have been determined to be 411±40 cm⁻¹ (4.92±0.48 kJ/mol) for the Gg′/Tt and 315±40 cm⁻¹ (3.76±0.48 kJ/mol) for the Gg′/Tg, with the Gg′ conformer the most stable form. Additionally, the infrared spectrum of the gas, and Raman spectrum of the liquid phase are reported. The structural parameters, conformational stabilities, barriers to internal rotation and fundamental frequencies have been obtained from ab initio calculations utilizing different basis sets at the restricted Hartree–Fock or with full electron correlation by the perturbation method to second order. The theoretical results are compared to the experimental results when appropriate. Combining the ab initio calculations with the microwave rotational constants, r₀ adjusted parameters have been obtained for the three 2-haloethanols (F, Cl and Br) for the Gg′ conformers.     

Infrared, and Raman spectra, conformational stability, normal coordinate analysis, ab initio calculations, and vibrational assignment of 1-chlorosilacyclobutane

The infrared spectra (3500–40 cm⁻¹) of gaseous and solid and the Raman spectra (3500–30 cm⁻¹) of liquid and solid 1-chlorosilacyclobutane, c-C₃H₆SiClH, have been obtained. Both the axial and equatorial conformers with respect to the chlorine atom have been identified in the fluid phases. Variable temperature (−105 to −150°C) studies of the infrared spectra of the sample dissolved in liquid krypton have been carried out. From these data, the enthalpy difference has been determined to be 211±17 cm⁻¹ (2.53±0.21 kJ/mol), with the equatorial conformer being the more stable form and the only conformer remaining in the annealed solid. At ambient temperatures, approximately 26% of the axial conformers are present in the vapor phase. A complete vibrational assignment is proposed for the equatorial conformer, and many of the fundamentals of the axial conformers have also been identified. The vibrational assignments are supported by normal coordinate calculations utilizing ab initio force constants. Complete equilibrium geometries, conformational stabilities, harmonic force fields, infrared intensities, Raman activities, and depolarization ratios have been determined for both rotamers by ab initio calculations employing the 6-31G(d) basis set at the levels of restricted Hartree–Fock (RHF) and/or Moller–Plesset (MP) to second order. Structural parameters have also been obtained using MP2/6-311+G(d,p) ab initio calculations. The r₀ parameters for both conformers are obtained from a combination of the ab initio predicted values and the twelve previously reported microwave rotational constants. The results are discussed and compared to those obtained for some similar molecules.     

Revised vibrational band assignments for the experimental IR and Raman spectra of 2,3,4-trifluorobenzonitrile based on ab initio, DFT and normal coordinate calculations

In the present study, a systematic vibrational spectroscopic investigation for the experimental IR and Raman spectra of 2,3,4-trifluorobenzonitrile (TFB), aided by electronic structure calculations has been carried out. The electronic structure calculations – ab initio (RHF) and hybrid density functional methods (B3LYP) – have been performed with 6-31G* basis set. Molecular equilibrium geometries, electronic energies, IR intensities, harmonic vibrational frequencies, depolarization ratios and Raman activities have been computed. The results of the calculations have been used to simulate IR and Raman spectra for TFB that showed excellent agreement with the observed spectra. Potential energy distribution (PED) and normal mode analysis have also been performed. The assignments proposed based on the experimental IR and Raman spectra have been reviewed. A complete assignment of the observed spectra has been proposed.