An accurate and easy procedure to obtain isothermal Kováts retention indices in gas chromatography

Isothermal Kováts retention indices may be used in GC for identification purposes, but they are also useful in characterisation of stationary phases and for studying structural and physico-chemical properties of both the analyte and the stationary phase. They are currently reported as whole numbers with an accuracy of one index unit for non-polar stationary phases. The method recommended for their calculation uses a linear regression model, although non-linear models have also been applied with good results. In both cases, a computer programme and the retention times of a series of n-alkanes that elute correctly and resolved from the other compounds are needed, conditions which cannot always be fulfilled. However, it is possible to calculate retention indices with an accuracy of 0.1 retention index units (0.2 units for packed columns) with the help of only three n-alkanes using just a pocket calculator or a computer spreadsheet. The main requirement is that at least one of the n-alkanes has a retention index differing by no more than one hundred retention index units from that of the analyte being investigated. Examples are given for different stationary phases.     

Mathematical models of solute retention in gas chromatography as sources of thermodynamic data. Part III. Alkylbenzenes as the test analytes

Direct determination of thermodynamic data has always been a complicated and troublesome experimental task. Gas chromatography is among long-established working tools well suited to performing this particular task indirectly. Our own results were first presented in the papers by Ciazynska-Halarewicz and Kowalska (1,2), and this article is Part III in the series. Present experiments are carried out on low- and medium-polarity stationary phases at five different temperatures ranging from 323K to 423K. They enable determination of two thermodynamic properties of the alkylbenzenes, molar enthalpy of vaporization (DeltaH(vap)), and the chemical potential of partitioning of the methylene group between the two phases of the chromatographic system (Delta micro (p(-CH2-))). These properties are obtained from eight nonempirical models and, as is apparent from their derivation (3-7), the terms of the models have clearly defined physical meaning, which enables calculation of thermodynamic properties.     

Retention characteristics in gas chromatography as function of molecular mass of the stationary phase

The thermodynamic characteristics of the selectivity of stationary phases in gas-liquid chromatography have been used to study the change in selectivity of a stationary phase with its increasing molecular mass within the limits of the same class of compounds. It is shown that the entropy of disssolution is the dominant thermodynamic factor of selectivity in the case of paraffinic stationary phases; a linear relatinship exists between the logarithm of relative retention of different sorbates and the reciprocal molecular mass of the stationary phase. In the case of solutions where hydrogen bonds can be formed, the enthalpy of dissolution serves as the dominant factor; in this case a linear relationship exists between the relative retention of alcohols and the reciprocal molecular mass of the stationary phase (polyethylene glycol). For the other classes of sorbates and stationary phases, the entropy as well as the enthalpy of dissolution contribute to the relative retention when the molecular phase varies within a single class of substances. The theoretical postulations have been confirmed by experimental data for paraffinic stationary phases, polyethylene glycols, and phthalic acid esters.Translated from Teoreticheskaya i éksperimental'naya Khimiya, Vol. 24, No. 1, pp. 81–90, January–February, 1988.     

基于金属有机骨架材料固定相的气相色谱分离应用

金属有机骨架材料(MOFs)是一类由有机配体和金属离子(或金属簇)自组装形成的新型多功能材料。MOFs具有孔隙度高、比表面积大、孔径可调、化学和热稳定性高等特点,被广泛应用于吸附、分离、催化等多个领域。近年来,MOFs作为新型气相色谱固定相用于分离异构体受到了广泛关注。与传统无机多孔材料相比,MOFs在结构和功能上展现出高度的可调性,通过合理地选择配体和金属中心,可以设计合成具有不同孔道大小和孔道环境的MOFs,从而分别从热力学和动力学角度优化色谱分离效果,有效提高分离选择性。该文结合MOFs的结构,讨论了MOFs气相色谱固定相分离不同类型分析物的分离机理。分离机理主要包括MOFs孔道的分子筛效应或形状选择性,MOFs不饱和的金属位点与分析物中不同的官能团之间产生的相互作用,分析物与MOFs孔道之间产生的不同范德华力、π-π相互作用和氢键相互作用。此外,MOFs的手性分离可能主要依赖于外消旋体与手性MOFs中手性活性位点之间的相互作用。该文也对不同分析目标物进行了归类,综述了多种MOFs气相色谱固定相对烷烃、二甲苯异构体和乙基甲苯、外消旋体、含氧有机物、环境有机污染物的气相色谱分离效果。最后,该文还对MOFs在该领域的应用进行了总结与展望,旨在为MOFs气相色谱高效分离的研究提供参考。     

Characterization of phosphonium ionic liquids through a linear solvation energy relationship and their use as GLC stationary phases

In recent years, room temperature ionic liquids (RTILs) have proven to be of great interest to analytical chemists. One important development is the use of RTILs as highly thermally stable GLC stationary phases. To date, nearly all of the RTIL stationary phases have been nitrogen-based (ammonium, pyrrolidinium, imidazolium, etc.). In this work, eight new monocationic and three new dicationic phosphonium-based RTILs are used as gas–liquid chromatography (GLC) stationary phases. Inverse gas chromatography (GC) analyses are used to study the solvation properties of the phosphonium RTILs through a linear solvation energy model. This model describes the multiple solvation interactions that the phosphonium RTILs can undergo and is useful in understanding their properties. In addition, the phosphonium-based stationary phases are used to separate complex analyte mixtures by GLC. Results show that the small differences in the solvent properties of the phosphonium ILs compared with ammonium-based ILs will allow for different and unique separation selectivities. Also, the phosphonium-based stationary phases tend to be more thermally stable than nitrogen-based ILs, which is an advantage in many GC applications.     

The system of universal retention indices and aspects of its application in gas chromatography

Summary The universal retention index has been developed on the basis of a critical analysis of the forms of chromatographic retention data presentation. Methods are presented for the determination of the universal retention index. The advantages of the universal retention index system in the evaluation of the selectivity and classification of stationary phases and in the determination of the composition of binary and polynary stationary phases are discussed. The thermodynamic aspect of the suggested system of chromatographic retention data presentation is also considered.     

Comparison of two-stage retention index monitoring capillary gas chromatography and selected ion monitoring capillary gas chromatography – mass spectrometry as analytical tools

Two-stage capillary GC with two-stage retention index monitoring is an efficient analytical technique which can be used for detection and determination of small amounts of volatile compounds in complex mixtures of hundreds or thousands of other compounds. The system employs two capillary columns, coated with different stationary phases, connected on-line with the aid of a micro valve; the first column acts as a pre-separating unit from which unresolved fractions of interest are cut (transferred) into another column for final, interference-free separation of the compounds to be determined. This technique has been compared with selected ion monitoring capillary GC-MS using a hydrocarbon mixture as a test sample for comparing resolution, repeatability, and the practical usefulness of the techniques. Results indicate that two-stage capillary GC is very useful for mixtures containing compounds which produce mostly non-specific ions in the MS ion source whereas compounds producing specific ions can be easily analyzed by capillary GC – single ion monitoring MS even if they are not perfectly separated by a single capillary column.     

Retention characteristics of organic compounds on molten salt and ionic liquid-based gas chromatography stationary phases

The interest of using ionic liquids (ILs) as stationary phases in gas chromatography (GC) has increased in recent years. This is largely due to the fact that new classes of ILs are being developed that are capable of satisfying many of the requirements of GC stationary phases. This review highlights the major requirements of GC stationary phases and describes how molten salts/ILs can be designed to largely meet these needs. The retention characteristics of organic solutes will be discussed for ammonium, pyridinium, and phosphonium-based molten salts followed by imidazolium, pyridinium, pyrollidinium, and phosphonium-based IL stationary phases. The versatility of ILs allows for the development of stationary phases based on dicationic ILs, polymeric ILs, and IL mixtures. To aid in choosing the appropriate IL stationary phase for a particular separation, the reader is guided through the different types of stationary phases available to identify those capable of providing the desired separation selectivity of organic solutes while allowing for flexibility in ranges of temperature used throughout the separation.     

Preconcentration of trace amounts of cadmium in aqueous samples on minicolumns packed with Chromosorb series gas chromatographic stationary phases and its determination by electrothermal atomic absorption spectrometry.

The adsorption characteristics of five commercially available Chromosorb GC stationary phases towards Cd2+ and their application to the preconcentration and ETAAS determination of Cd2+ in several water samples were studied. The experimental results indicated that although all of the five Chromosorb GC stationary phases studied can retain Cd2+ quantitatively from aqueous solutions at appropriate pH values without adding chelating reagent. Chromosorb 105 displayed the highest adsorption capacity. A highly sensitive, simple methodology for preconcentration and ETAAS determination of trace amounts of cadmium in natural water samples using a Chromosorb 105 packed minicolumn is proposed. Conditions for quantitative and reproducible preconcentration, elution and subsequent ETAAS determination were established. The high retention efficiency (> 95%) for Cd2+ provides a sensitivity enhancement of 100-fold for a 200 mL sample volume with a detection limit of 6.2 ng L(-1) (3 sigma).     

Mathematical models of solute retention in gas chromatography as sources of thermodynamic data. Part IV. Aliphatic alcohols as the test analytes

This study is the fourth consecutive part belonging to the cycle devoted to an alternative approach to deriving certain thermodynamic magnitudes. The previous three papers were dedicated, respectively, to ketones, aldehydes, and alkylbenzenes. In our present study (similar to the previous ones) the following working procedure is adopted. With the aid of capillary gas chromatography, the retention times are obtained for a wide variety of the aliphatic alcohols. The analyses are carried out isothermally on stationary phases of different polarity and at five different measuring temperatures. These data constitute an experimental basis for further processing with the aid of the specially devised mathematical equations. The fitting parameters of these equations, due to their physicochemical meaning, enable determination of certain thermodynamic data. Nine equations used in this study are the relationships coupling the selected retention data [relative retention (r), non-reduced relative retention (rG), the retention factor (k), or the Kováts retention index (I)] and a variety of the physical magnitudes [the boiling point of the analyte (T(B)), its molar volume (Vm), or its molar refraction (Rm)]. These relationships are tested with respect to their performance to predict the molar enthalpy of vaporization (deltaHvap) of the analytes of interest (i.e., of aliphatic alcohols). Evaluation of the equations' performance is carried out through a comparison of the numerical values generated from this approach with those originating from the other methods, and a very good agreement was found between these two series of the data. The best molar enthalpy vaporization values (deltaHvap) are obtained from the retention data originating from the most polar of the three investigated stationary phases (i.e., DB-Wax). Models V and VIII proved the best performing ones among the nine models tested in this study.     

Characterization of stationary phases in subcritical fluid chromatography by the solvation parameter model. I. Alkylsiloxane-bonded stationary phases

Varied types of alkylsiloxane-bonded and fluoroalkylsiloxane-bonded stationary phases, all commercially available, were investigated with subcritical fluid mobile phase. The effect of the alkyl chain length (from C4 to C18) and of the nature of the bonding (fluorodecylsiloxane, phenyl-C18 and polar-embedded-C18) on the chromatographic behaviour was investigated by the use of a linear solvation energy relationship (LSER), the solvation parameter model. A large set of test compounds provides precise and reliable information on the intermolecular interactions responsible for retention on these stationary phases used with a subcritical mobile phase. First of all, the results underline the close properties between subcritical fluid and organic liquid. The use of non aqueous mobile phases reduces the cavity energy and the mobile phase acidity generally encountered with aqueous liquid phases, allowing other interactions to take a part in retention. As expected, an increase in the alkyl chain length favours the dispersive interactions between the solutes and the stationary phases. Changes in basicity and acidity of the stationary phases are also related to the chain length, but, in this case, mobile phase adsorption onto the stationary phase is supposed to explain these behaviours. The addition of a phenyl group at the bottom of the C18 chain, near the silica, does not induce great modifications in the retentive properties. The fluorodecylsiloxane and the polar-embedded alkylsiloxane phases display very different properties, and can be complementary to the classical alkylsiloxane-bonded phases. In particular, the fluorinated phase does not favour the dispersive interactions, in comparison to hydrogenated stationary phases, when the basicity of the polar-embedded phase is obviously greater than the one of classical alkylsiloxane-bonded phases, due to the amide function. Finally, logk-logk curves plotted between the different phases illustrate the effect of the interaction properties on the retention of different classes of compounds.     

A simple,fast, and accurate thermodynamic‐based approach for transfer and prediction of gas chromatography retention times between columns and instruments Part I: Estimation of reference column geometry and thermodynamic parameters

The transfer of retention times based on thermodynamic models between columns can aid in separation optimization and compound identification in gas chromatography. Although earlier investigations have been reported, this problem remains unsuccessfully addressed. One barrier is poor predictive accuracy when moving from a reference column or system to a new target column or system. This is attributed to challenges associated with the accurate determination of the effective geometric parameters of the columns. To overcome this, we designed least squares‐based models that account for geometric parameters of the columns and thermodynamic parameters of compounds as they partition between mobile and stationary phases. Quasi‐Newton‐based algorithms were then used to perform the numerical optimization. In this first of three parts, the model used to determine the geometric parameters of the reference column and the thermodynamic parameters of compounds subjected to separation is introduced. As will be shown, the overall approach significantly improves the predictive accuracy and transferability of thermodynamic data (and retention times) between columns of the same stationary phase chemistry. The data required for the determination of the thermodynamic parameters and retention time prediction are obtained from fast and simple experiments. The proposed model and optimization algorithms were tested and validated using simulated and experimental data.     

GC behaviour of symmetrical n-dialkyl sulphides under isothermal and temperature programming conditions

Retention indices were determined for a homologous series of n-dialkyl sulphides on three stationary phases (SE-30, OV-17 and XE-60) under isothermal and linear temperature programming conditions. Under these two different GC conditions, equations were derived for each of the three stationary phases which showed the dependence of retention index on the number of carbon atoms and the boiling points for a homologous series of n-dialkyl sulphides. The equation for the correlation isothermal retention index was shown to be applicable to the identification of n-dialkyl sulphides using linear temperature programming. It was found that the GC behaviour of n-dialkyl sulphides makes these compounds suitable for use as a standard series instead of n-alkanes for the calculation of retention indices in GC analysis in which detectors insensitive to n-alkanes are employed. The use of the homologous series of n-dialkyl sulphides for the calculation of sulphide retention indices can be great practical importance in the microanalysis of natural compounds. We have used this method successfully in the analysis of pesticides containing S-atoms.     

硅藻土载负葫芦[7]脲气相色谱固定相的制备及其性能评价

在酸性条件下,将自制的葫芦[7]脲均匀地涂覆到102白色硅藻土担体上,制得葫芦[7]脲气相色谱固定相。 采用红外光谱、质谱、元素分析和热重分析表征了葫芦[7]脲在载体表面的结构。 利用相关探针测定了新固定相的麦氏常数,表征了其基本色谱性能。 考察了葫芦[7]脲气相色谱固定相填充柱对芳香烃、卤代烃、醇、酮、酯及硅氧烷的分离能力。 结果表明,葫芦[7]脲固定相热稳定性高,柱色谱性能稳定,对较广泛的化合物尤其对高沸点的酯类及硅氧烷类化合物显示出良好的色谱分离能力(7 min内分离),作为气相色谱固定相有较好的应用前景。 初步讨论了葫芦[7]脲固定相对上述化合物的分离机理。     

新型苯基桥键色谱固定相的热力学性质

将制备的球形苯基桥键型杂化介孔色谱固定相与商品化的C18和苯基键合硅胶固定相对比,研究其热力学性质。以稠环芳烃为例,探讨了溶质在固定相和流动相之间的迁移焓变、迁移熵变等热力学参数的变化。结果表明,与两种商品化的固定相不同,实验制备的苯基桥键固定相不存在明显的焓-熵补偿效应,证实新型桥键固定相分离机理是疏水作用、π-π作用、包结作用等协同作用的结果。     

Application of thermodynamic‐based retention time prediction to ionic liquid stationary phases

First‐ and second‐dimension retention times for a series of alkyl phosphates were predicted for multiple column combinations in GC×GC. This was accomplished through the use of a three‐parameter thermodynamic model where the analytes’ interactions with the stationary phases in both dimensions are known. Ionic liquid columns were employed to impart unique selectivity for alkyl phosphates, and it was determined that for alkyl phosphate compounds, ionic liquid columns are best used in the primary dimension. Retention coordinates for unknown phosphates are predicted from the thermodynamic parameters of a set standard alkyl phosphates. Additionally, we present changing retention properties of alkyl phosphates on some ionic liquid columns, due to suspected reaction between the analyte and column. This makes it difficult to accurately predict their retention properties, and in general poses a problem for ionic liquid columns with these types of analytes.     

Separation of Isomers on Nematic Liquid Crystal Stationary Phases in Gas Chromatography: A Review

Understanding the composition of complex hydrocarbon mixtures is important for environmental studies in diverse fields, but many prevalent compounds cannot be confidently identified using traditional gas chromatography (GC) techniques. Increasing requirements on analyses of isomeric compounds and the problems encountered in their separation demand a study of more efficient systems which exhibit a high selectivity. Kelker and Fresenius first used nematic liquid crystals as stereospecific stationary phases in GC. Nematic liquid crystal has shown this particular selectivity and sensitivity as stationary phases for the separation of isomers having similar volatilities. Because of their unique selectivity towards rigid solute isomers, liquid crystal stationary phases were considered at one time to be a very promising class of materials that give gas chromatographic separations very different from those that can be obtained with any other stationary phase. Since then, a great deal of attention has been paid to the separation properties of this relatively wide group of substances. Liquid crystal can be used to separate a variety of compounds including isomer mixtures which cannot be separated on conventional stationary phases. This paper aims to review all specific experimental results and presents a comparative analytical study of monomeric nematic liquid crystal stationary phases used in GC. A further contribution of this review is in the field of isomeric compounds separation.     

Improving selectivity in gas chromatography by using chemically modified multi-walled carbon nanotubes as stationary phase

Amino-terminated alkyl MWCNTs (MWCNTs-R-NH₂), synthesized by chemical modification of the nanotube skeleton by nucleophilic substitution with 2,2′-(ethylenedioxy)diethylamine, were successfully used as stationary phases for gas chromatographic separation of esters and chloroaromatics. The presence of alkyl chains with polar embedded groups made the functionalized MWCNTs (f-MWCNTs) a mixed-mode GC separation material able to interact in different ways with the analytes. Compared with non-functionalized MWCNTs (nf-MWCNTs), MWCNTs-R-NH₂ had higher selectivity, enhanced resolution, and optimum retention behaviour, and they were proved to perform better than the commercial stationary phase Porapak QS (PQS), claimed to be suitable for similar applications. The so-prepared stationary phase was used for analysis of a synthetic mixture containing different classes of analytes, viz. esters, ketones, alcohols, alkanes, and aromatic hydrocarbons, and finally used for investigation of similar real matrices. In particular, the constituents of a commercial paint thinner were determined by direct injection of the sample, with good reproducibility (inter-day precision RSDs from 5 to 19%). Two unknown samples of commercial white spirit were also analysed for determination of the aromatic hydrocarbon content, and their composition was profiled on the basis of the different compounds identified.     

Evaluation of new ionic liquids as high stability selective stationary phases in gas chromatography

Two ionic liquids (ILs), namely (S,S)-1-butyl-3-(2'-hydroxy-cyclohexyl)-3H-imidazol-1-ium tetrafluoroborate and (S,S)-1-butyl-3-(2'-acetyl-cyclohexyl)-3H-imidazol-1-ium tetrafluoroborate have been employed as stationary phases in capillary gas chromatography. These new phases exhibit a column efficiency of 1,600 and 2,100 plates m(-1) for IL 1 and IL 2, respectively, a wide operating temperature range and good thermal stability (bleeding temperature of 250 °C for IL 1 and 160 °C for IL 2). Inverse gas chromatography (GC) analyses were used to study the solvation properties of these ILs through a linear solvation energy model. The application of these ILs as new GC stationary phases was studied. These stationary phases exhibited unique selectivity for many organic substances, such as alkanes, ketones, esters, and aromatic compounds. The efficient separation of several mixtures containing compounds of different polarities and the good separation of fatty acid methyl esters (FAMEs) and cis/trans isomers indicate that these ILs may be applicable as a new type of GC stationary phases.     

Cellulose Derivatives Used as Chiral Stationary Phases in Capillary Gas Chromatography

Abstract

In this work, we present the first separation of enantiomers in gas chromatography (GC) using a fused‐silica capillary column containing cellulose triacetate, cellulose triphenylcarbamate, or cellulose tris(3,5‐dimethylphenylcarbamate) as the new chiral stationary phase. The separated solutes included alcohols, amine, ketone, ether, ester, and amino acid. Their column efficiency, polarity, and chiral selectivity were studied. The retention mechanism was discussed. The results showed that those derivatives had relatively high chiral recognition abilities and can be used as the chiral stationary phases in GC.