溶胶-凝胶法制备用于CO2气氛下乙苯脱氢反应的高活性Cr2O3-SiO2催化剂

 采用溶胶-凝胶法制备了Cr2O3-SiO2催化剂，考察了催化剂对CO2气氛下乙苯脱氢制苯乙烯反应的催化性能. 结果表明，溶胶-凝胶法制备的Cr2O3-SiO2催化剂上乙苯脱氢活性是常规的Cr2O3/SiO2负载型催化剂的2倍，Cr2O3-SiO2催化剂中Cr6+的含量较高是其具有高活性的主要原因.     

Ga2O3催化剂上CO2气氛中丙烷脱氢反应的研究

考察了Ga2O3对于丙烷脱氢和CO2气氛脱氢反应的催化性能.结果表明,Ga2O3具有较高的催化活性,其性能优于传统的Cr2O3脱氢催化剂.催化反应可能经过了一个丙烷异裂的过程,其中CO2是通过逆水煤气反应和Boudouard反应来促进催化剂性能的,在高于823K时该促进作用更为明显.催化剂的催化活性和其表面酸密度密切相关,在Ga2O3结构中,四配位Ga3+是其酸位的来源,并通过质子与氧化物的共同作用促进反应进行.催化剂的失活是由于表面的积碳和活性氧的消耗共同造成的.同时还对Ga2O3作为丙烷脱氢反应的催化剂的催化反应机理进行了初步探讨.     

Ga2O3催化剂上CO2气氛中丙烷脱氢反应的研究

考察了Ga2O3对于丙烷脱氢和CO2气氛脱氢反应的催化性能. 结果表明, Ga2O3具有较高的催化活性, 其性能优于传统的Cr2O3脱氢催化剂. 催化反应可能经过了一个丙烷异裂的过程, 其中CO2是通过逆水煤气反应和Boudouard反应来促进催化剂性能的, 在高于823 K时该促进作用更为明显. 催化剂的催化活性和其表面酸密度密切相关, 在Ga2O3结构中, 四配位Ga3+是其酸位的来源, 并通过质子与氧化物的共同作用促进反应进行. 催化剂的失活是由于表面的积碳和活性氧的消耗共同造成的. 同时还对Ga2O3作为丙烷脱氢反应的催化剂的催化反应机理进行了初步探讨.     

Ga2O3催化剂上CO2气氛中丙烷脱氢反应的研究

考察了Ga2O3对于丙烷脱氢和CO2气氛脱氢反应的催化性能,结果表明,Ga2O3具有较高的催化活性,其性能优于传统的Cr2O3脱氢催化剂,催化反应可能经过了一个丙烷异裂的过程,其中CO2是通过逆水煤气反应和Boudouard反应来促进催化剂性能的,在高于823K时该促进作用更为明显,催化剂的催化活性和其表面酸密度密切相关,在Ga2O3结构中,四配位Ga^3＋是其酸位的来源,并通过质子与氧化物的共同作用促进反应进行,催化剂的失活是由于表面的积碳和活性氧的消耗共同造成的,同时还对Ga2O3作为丙烷脱氢反应的催化剂的催化反应机理进行了初步探讨。     

铁系催化剂上乙苯与CO2氧化脱氢反应

采用浸渍法和溶胶-凝胶法制备了三种含Mg,Fe和Al量相同的Fe2O3-MgO/γ-Al2O3,Fe2O3/MgAl2O4和MgFe0.1Al1.9O4催化剂,在580°C考察了它们催化乙苯与CO2氧化脱氢反应性能,并采用X射线衍射,表面元素分析,H2-程序升温还原和CO2-程序升温脱附等技术对催化剂体相及表面性质进行了表征.结果表明,催化剂制备方法影响Fe物种的存在形态,进而影响催化剂的稳定性和活性.采用浸渍法制备的Fe2O3/MgAl2O4催化剂含有高度分散的Fe2O3活性物种,该物种具有较好的初活性,但是稳定性较差;而采用溶胶-凝胶法制备的MgFe0.1Al1.9O4催化剂中,Fe物种主要以同晶取代的形式存在于尖晶石骨架中,因而具有较高的乙苯与CO2氧化脱氢催化活性和稳定性.     

PtSn/Al2O3/MCM-41催化剂的丙烷脱氢催化性能

用微型催化反应装置评价, 并结合X射线粉末衍射(XRD)、表面积和孔结构测试、程序升温还原(TPR)、氢化学吸附和热重分析等方法研究了负载型PtSn/γ-Al2O3, PtSn/MCM-41和PtSn/Al2O3/MCM-41催化剂的丙烷脱氢反应催化性能. 发现PtSn/Al2O3/MCM-41催化剂具有较PtSn/MCM-41催化剂高的丙烷脱氢反应活性和较PtSn/γ-Al2O3催化剂高的反应稳定性. 实验结果表明, 纯硅MCM-41载体表面的锡物种因与载体相互作用较弱故易被还原, 导致铂金属分散度和催化剂的丙烷脱氢活性较低. 用Al2O3修饰MCM-41可以增强Sn物种与Al2O3/MCM-41载体之间的相互作用, 提高PtSn/Al2O3/MCM-41催化剂铂金属分散度和丙烷脱氢催化活性. 并且, 积炭后的PtSn/Al2O3/MCM-41催化剂具有较高的铂金属表面裸露度, 故具有较高的丙烷脱氢反应稳定性. PtSn/Al2O3/MCM-41催化剂优良的丙烷脱氢催化性能可能不仅与Sn-载体Al2O3/MCM-41较强的相互作用有关, 而且与Al2O3/MCM-41载体的介孔结构有关.     

Ce助剂对V/SiO_2催化CO_2氧化乙苯脱氢性能的影响

通过N2吸附、X射线衍射(XRD)、X射线光电子能谱(XPS)、H2程序升温还原(H2-TPR)、CO2程序升温脱附(CO2-TPD)和热重分析(TGA)等多种表征手段和催化反应性能评价,研究了铈助剂的添加对V/SiO2催化CO2氧化乙苯脱氢性能的影响.结果表明,Ce助剂不仅提高了催化剂活性组分分散性和氧化还原性能,抑制了钒物种的深度还原,而且增强了催化剂碱性和CO2吸附能力,减缓了积炭生成,从而显著提高了V-Ce/SiO2对CO2氧化乙苯脱氢反应的催化活性和稳定性.在本实验中,V(0.8)-Ce(0.25)/SiO2催化剂表现出最佳的催化性能,苯乙烯(ST)收率可达55.6%,选择性为98.5%,反应12 h后,催化剂活性基本不变,与惰性N2气氛比较,CO2明显促进了乙苯脱氢反应,归因于CO2能保持催化剂表面钒物种的高价态.     

CO2 气氛下 MCF 负载氧化钒催化剂上乙苯脱氢反应

 以介孔氧化硅泡沫 MCF 为载体合成了一系列负载型氧化钒催化剂 (V 含量为 2%?10%). 采用 N2 吸附、X 射线衍射和 H2 程序升温还原对 V/MCF 催化剂的结构和织构性质进行了表征, 并评价了催化剂在 CO2 气氛下的乙苯脱氢性能. V/MCF 催化剂具有较高的乙苯脱氢活性, 其中 V 含量为 6% 的催化剂具有最高的反应活性. V/MCF 催化剂的乙苯脱氢活性显著高于 V/MCM-41, 这是由于前者具有较高的可还原性以及较好的扩散性能. CO2 气氛下的乙苯转化率明显高于 N2 气氛下的, 这归因于 CO2 与乙苯发生氧化脱氢, 并通过逆水煤气变换反应在线除去脱氢反应生成的氢.     

PtSn/Al2O3/MCM-41催化剂的丙烷脱氢催化性能

用微型催化反应装置评价,并结合X射线粉末衍射(XRD)、表面积和孔结构测试、程序升温还原(TPR)、氢化学吸附和热重分析等方法研究了负载型PtSn/γ-Al2O3,PtSn/MCM-41和PtSn/Al2O3/MCM-41催化剂的丙烷脱氢反应催化性能.发现PtSn/Al2O3/MCM-41催化剂具有较PtSn/MCM-41催化剂高的丙烷脱氢反应活性和较PtSn/γ-Al2O3催化剂高的反应稳定性.实验结果表明,纯硅MCM-41载体表面的锡物种因与载体相互作用较弱故易被还原,导致铂金属分散度和催化剂的丙烷脱氢活性较低.用Al2O3修饰MCM-41可以增强Sn物种与Al2O3/MCM-41载体之间的相互作用,提高PtSn/Al2O3/MCM-41催化剂铂金属分散度和丙烷脱氢催化活性.并且,积炭后的PtSn/Al2O3/MCM-41催化剂具有较高的铂金属表面裸露度,故具有较高的丙烷脱氢反应稳定性.PtSn/Al2O3/MCM-41催化剂优良的丙烷脱氢催化性能町能不仅与Sn-载体Al2O3/MCM-41较强的相互作用有关,而且与Al2O3/MCM-41载体的介孔结构有关.     

助剂Li对CO2气氛下Fe-Li/AC催化剂上乙苯脱氢反应性能的影响

对 CO2 气氛下 Fe-Li/AC 催化剂上的乙苯脱氢反应性能进行了详细研究. N2 吸附-脱附、CO2 程序升温脱附和 X 射线衍射表征结果表明, 助剂 Li 不仅增加了催化剂比表面积和活性组分分散性, 而且增强了催化剂碱性和 CO2 吸附能力, 从而提高了 Fe/AC 对乙苯脱氢的催化性能. 助剂 Li 能显著提高 Fe/AC 催化剂的乙苯脱氢活性和 CO2 的促进作用, 抑制催化剂的失活. 在 Fe(3.0)-Li(0.6)/AC 催化剂(Fe 和 Li 的负载量分别为 3.0 和 0.6 mmol/g)上, 550 ℃、接触时间为 3.57 (g·h)/mol 和 CO2/乙苯摩尔比为 20 的条件下, 苯乙烯收率可达 62.9%, 选择性为 96.2%. CO2 气氛下的苯乙烯收率显著高于 N2 气氛下的, 归因于 CO2 能保持催化剂表面铁物种的高价态, 并通过逆水煤气变换反应在线除去脱氢反应生成的氢.     

二氧化碳和丙烯直接合成甲基丙烯酸的NiPMo/TiO2催化剂的研究

用溶胶-凝胶法以磷钼酸(MPA)的镍盐溶液水解钛酸四丁酯制备了NiPMo/TiO2催化剂.使用ICP、 XRD、 TG-DTA、 IR、 TPD-MS和微反应技术研究了催化剂的化学组成、热稳定性、化学吸附性质和催化反应性能.杂多钼酸盐与TiO2通过O2-在TiO2表面发生了键合.在623 K下,杂多阴离子仍保持原有的Keggin结构.CO2在Lewis酸位Ni(Ⅱ)和Lewis碱位Ni-O-Mo的桥氧协同作用下生成CO2卧式吸附态Ni(Ⅱ)←O-(CO)←(O--Ni).丙烯有多种吸附态在催化剂上吸附.在563 K、 1 MPa和空速1500 h-1的反应条件下,丙烯的摩尔转化率为3.2%,产物MAA选择性为95%.     

Toward new camptothecins. Part 6: Synthesis of crucial ketones and their use in Friedländer reaction

In the context of the preparation of camptothecin and luotonin A analogs, the synthesis of some key keto-precursors and their use in Friedländer condensation are described. This paper also focuses on the stability of these keto intermediates and emphasizes the major differences between indolizinones and pyrroloquinazolinones series. Noteworthy is also the report of some original structures isolated as by-products of some experiments.     

CoFe2O4自形成磁性液体场致结构化对磁化的影响

The Langevin paramagnetic theory can’t describe the relation between magnetization of ferrofluids and applied magnetic field. The structuralization of ferrofluids, which is considered the main influence factor of the magnetization, is regarded. The part of magnetization works is deposited when the structure is forming. This action influences the magnetization of ferrofluids directly or indirectly. On the base of the “compressing” model, the Langevin function that usually describes the magnetization of ferrofluid is modified, and a well-fitted curve is obtained. An equation of the relation between the equivalent volume fraction after being “compressed” and the intensity of magnetic field is discovered, which approximately describes the process of magnetization. The relation between the approximate initial susceptibility and the volume fraction can be obtained from modified formula.     

Highly regioselective Buchwald–Hartwig amination at C-2 of 2,4-dichloropyridine enabling a novel approach to 2,4-bisanilinopyridine (BAPyd) libraries

The highly regioselective Buchwald–Hartwig amination at C-2 of the cheap and readily accessible reagent, 2,4-dichloropyridine with a range of anilines and heterocyclic amines is described. This new methodology is robust and provides a facile access to 4-chloro-N-phenylpyridin-2-amines on 0.25 mol scale. These intermediates undergo a further Buchwald–Hartwig amination at higher temperature to enable rapid exploration of the chemical space at C-4 and to provide a library of 2,4-bisaminopyridines.     

KMnO4-mediated oxidative CN bond cleavage of tertiary amines: Synthesis of amides and sulfonamides

KMnO₄-mediated oxidative CN bond cleavage of tertiary amines producing secondary amine was introduced, which was trapped by electrophiles (acyl chloride and sulfonyl chloride) to form amides and sulfonamides. The reaction could take place at mild condition, tolerating a wide range of function groups and affording products in moderate to excellent yields.     

Chemistry of heterocyclic compounds at the A. E. Favorsky Irkutsk Institute of Chemistry, Siberian Branch of the Russian Academy of Sciences, over 50 years (Review)

The review contains a concise historical account and information on the most significant researches undertaken by the staff at the A. E. Favorsky Irkutsk Institute of Chemistry, Siberian Branch of the Russian Academy of Sciences on the Chemistry of Heterocyclic Compounds. Dedicated to Academician of the Russian Academy of Sciences B. A. Trofimov on his 70th jubilee. Translated from Khimiya Geterotsiklicheskikh Soedinenii, No. 10, pp. 1443–1502, October, 2008.     

Sulfur-directed metal-free and regiospecific methyl C(sp3)–H imidation of thioanisoles

Regiospecific and direct imidation of the methyl C(sp³)–H bond of thioanisoles is realized under mild and metal-free conditions with N-fluorobis(benzenesulfonyl)imide as an oxidant and nitrogen source. Proposed mechanism suggests that thionium ion intermediates and a Pummerer-type reaction are involved. The imidation has advantages such as high step-economy, excellent functionality tolerance, and regiospecificity, giving structurally diverse imidation products.     

Selective syntheses of 2H-1,3-oxazines and 1H-pyrrol-3(2H)-ones via temperature-dependent Rh(II)-carbenoid-mediated 2H-azirine-ring expansion

The Rh(II)-catalyzed reaction of 2-carbonyl-substituted 2H-azirines with ethyl 2-cyano-2-diazoacetate or 2-diazo-3,3,3-trifluoropropionate provides an easy access to 2H-1,3-oxazines and 1H-pyrrol-3(2H)-ones. These compounds can be selectively prepared from the same starting material using temperature as the only varied parameter. The 2-azabuta-1,3-diene intermediate, a common precursor for both heterocyclic products, isomerizes into 2H-1,3-oxazine under kinetic control, while 1H-pyrrol-3(2H)-one is the sole product of the reaction at elevated temperatures. According to DFT-calculations a one-atom oxazine ring contraction involving ring-opening to a 2-azabuta-1,3-diene intermediate, followed by a 1,5- and 1,2-prototropic shift leads to the consecutive formation of imidoylketene and azomethine ylide, which then further undergo cyclization to the pyrrole derivative.     

Synthesis of 1-benzyloxypyrazin-2(1H)-one derivatives

Different approaches for the synthesis of 1-benzyloxypyrazin-2(1H)-one derivatives from simple amino acids have been investigated. A library of 33 precursors for the preparation of N-hydroxy pyrazinones was obtained in moderate to good yields.