Crystal Structure and Thermal Decomposition of 5-Aminotetrazole Trinitrophloroglucinolate

5-Aminotetrazole trinitrophloroglucinolate ((ATZ)TNPG) was prepared and characterized by elemental analysis and FT-IR spectroscopy. The crystal structure was determined by X-ray diffraction analysis and it belonged to orthorhombic system and Pbca space group with a=0.6624(2) nm, b=1.7933(4) nm, c=2.3117(5) nm, V=2.7458(9) nm³, Z=4, and D_c=1.849 g·cm⁻³. The molecular formula was confirmed to be (ATZ)TNPG·2H₂O. 5-Aminotetrazole cation (ATZ⁺) and trinitrophloroglucinol anion (TNPG⁻) were linked into 2-D layers along b-axis and c-axis by hydrogen bonds. Then the layers were linked along a-axis by hydrogen bonds between the water molecules belonging to different layers. The thermal decomposition mechanism of the compound was studied by differential scanning calorimetry (DSC), thermogravimetry-thermogravimetric analysis (TG-DTG), and Fourier transform-infrared (FT-IR) spectroscopy techniques. Under nitrogen atmosphere with a heating rate of 10 °C·min⁻¹, the compound experienced one endothermic process with peak temperature of 76 °C and one exothermal process with peak temperature of 203 °C. The former was confirmed to be a dehydrate process. The latter was the decomposition of TNPG⁻ and ATZ⁺ in the compound. The exothermic enthalpy change of this process was −212.10 kJ·mol⁻¹. The kinetic parameter calculation from Kissinger's method were, E=132.1 kJ·mol⁻¹, ln(A/s⁻¹)=12.54 with r=0.9990, and the calculation results from Ozawa-Doyle's method were, E=133.1 kJ·mol⁻¹ with r=0.9992.     

Dinitrogen and carbon monoxide hydrogen bonding in protonic zeolites: Studies from variable-temperature infrared spectroscopy

Adsorption (at a low temperature) of nitrogen on the protonic zeolite H-Y results in hydrogen bonding of the adsorbed N₂ molecules with the zeolite Si(OH)Al Brønsted-acid groups. This hydrogen-bonding interaction leads to activation, in the infrared, of the fundamental N–N stretching mode, which appears at 2334 cm⁻¹. From infrared spectra taken over a temperature range, the standard enthalpy of formation of the OH···N₂ complex was found to be ΔH⁰ = −15.7(±1) kJ mol⁻¹. Similarly, variable-temperature infrared spectroscopy was used to determine the standard enthalpy change involved in formation of H-bonded CO complexes for CO adsorbed on the zeolites H-ZSM-5 and H-FER; the corresponding values of ΔH⁰ were found to be −29.4(±1) and −28.4(±1) kJ mol⁻¹, respectively. The whole set of results was analysed in the context of other relevant data available in the literature.     

An ab initio quantum chemical study of the electronic structure and stability of the pyrrolyl radical: Comparison with the isoelectronic cyclopentadienyl radical

The electronic structure and stability of pyrrolyl are investigated using CASSCF, CASPT2 and G2(MP2) techniques. The ground state of pyrrolyl is found to be ²A₂, with five π-electrons, as in cyclopentadienyl. The computed N–H bond energy of pyrrole is 94.8 kcal mol⁻¹, while the heat of formation Δ_fH₂₉₈^o of pyrrolyl is deduced to be 70.5±1 kcal mol⁻¹. The Arrhenius parameters of N–H and C–H bond fission in pyrrole and cyclopentadiene and hydrogen abstraction reactions (by hydrogen) were also computed, indicating that pyrrolyl forms predominantly by C–H bond fission of pyrrolenine rather than by direct N–H bond fission.     

Tetrameric O–HO hydrogen-bond systems accompanied by C–HO hydrogen-bonds in the crystal of 1,4-bis(hydroxymethyl)triptycene: an X-ray study

The crystal structure of the title compound was determined (crystal data at 143 K: triclinic, space group P−1, Z=4, a=9.538(2) Å, b=11.638(2) Å, c=14.473(2) Å, α=88.647(3)°, β=89.875(3)°, γ=83.835(3)°, V=1596.9(4) ų). In the crystal there exist two kinds of tetrameric O–HO hydrogen-bond (H-bond) systems that are quite similar to each other. The oxygen atoms accept also intermolecular C–HO H-bonds. The two types of the H-bonds connect the molecules to an infinite two-dimensional supramolecular unit, the stacking of which is aided by an intermolecular C–Hπ H-bond. A phase transition with ΔH_t=4.4±0.1 kJ/mol was found at around 420 K.     

Diffusion of Sr and Zr in BaTiO3 single crystals

The diffusion of strontium and zirconium in single crystal BaTiO₃ was investigated in air at temperatures between 1000 °C and 1250 °C. Thin films of SrTiO₃, deposited by spin coating a precursor solution and thin films of zirconium, deposited onto the sample surfaces by sputtering, were used as diffusion sources. The diffusion profiles were measured by SIMS depth profiling on a time-of-flight secondary ion mass spectrometer (ToF-SIMS). The diffusion coefficients of strontium and zirconium were given by D_Sr = 3.6 × 10^2.0±4.4 exp[−(543 ± 117) kJ mol⁻¹/(RT)] cm² s⁻¹ and D_Zr = 1.1 × 10^1.0±2.1 exp[−(489 ± 56) kJ mol⁻¹/(RT)] cm² s⁻¹. The results are discussed in terms of different diffusion mechanisms in the perovskite structure of BaTiO₃.     

NMR study of the dynamic behaviour of the system 2-ethylhexylsodium-2-ethylhexyllithium in heptane

Mixtures of 2-ethylhexylsodium and 2-ethylhexyllithium are studied by ¹H- and ¹³C-NMR spectroscopy in the temperature range from 20 to −50°C in hydrocarbon solutions. Characteristic temperature-dependent spectra obtained are indicative of dynamic exchange processes taking place in the system. The following activation parameters are found: ΔH^≠=31.7±2.7 kJ mol⁻¹; ΔG^≠₃₁₃=58.7±0.6 kJ mol⁻¹; ΔS^≠=−86.37±10.8 J mol⁻¹ K⁻¹. The negative value of the activation entropy indicates that the exchange proceeds through the associative mechanism. The participation in exchange reactions of aggregates, containing both sodium and lithium derivatives, is suggested.     

Structural, optical and thermal studies of Eu ions in lithium fluoroborate glasses

Borate glasses doped with trivalent europium were prepared by the conventional melt quenching technique, in the chemical composition of (49.99-x)B₂O₃ + 25Li₂O + 25LiF+xEu₂O₃ by varying the concentration of the rare earth ion in the order 0.01, 0.1, 1, 2 and 3 wt% and their structural, luminescence and thermal behavior have been reported. The XRD and FTIR spectra reveal the glass structure and the functional groups. The UV–VIS, luminescence spectra and lifetime of the Eu³⁺ ions were measured. The local site symmetry around the Eu³⁺ ions were evaluated through the luminescence intensity ratio (R) of the ⁵D₀ → ⁷F₂ to ⁵D₀ → ⁷F₁ transitions. Optical measurements have been carried out to explore the optical properties such as bonding parameters, Judd–Ofelt parameters, stimulated emission cross-section, transition probability, branching ratio, radiative lifetime, etc. The lifetime measurements of the ⁵D₀ level as a function of the concentration of Eu³⁺ ion have been found and is comparable to other reported for Eu³⁺ doped borate, phosphate glasses and higher than that for the tellurite glasses. The thermal properties such as glass transition, crystallization and melting temperatures of the Eu³⁺ glasses were studied through the DSC traces in the temperature range of 30−1200 °C at a heating rate of 10 °C per minute. The change in optical properties with the variation of Eu³⁺ ion concentration have been discussed and compared with similar results.     

Equilibrium, kinetics and thermodynamic aspects of Promethazine hydrochloride sorption by iron rich smectite

Equilibrium, kinetics and thermodynamic aspects of sorption of Promethazine hydrochloride (PHCl) onto iron rich smectite (IRS) from aqueous solution were investigated. The effect of pH on sorption of PHCl onto IRS was also found out. Experimental data were evaluated by using Langmuir, Freundlich and Dubinin–Raduschkevich (DR) isotherm equations. Freundlich and DR equations provided better compatibility than Langmuir equation. Besides, it was determined that the maximum sorption of PHCl takes place at about pH 5. From kinetic studies, it was obtained that sorption kinetics follow pseudo-second-order kinetic model for PHCl sorption onto IRS. When thermodynamic studies are concerned, the values of activation energy (E_a), ΔG°, ΔH° and ΔS° were obtained. ΔG° values are in the range of −8.84 and −9.45 kJ mol⁻¹ indicating spontaneous nature of physisorption. The negative value of the ΔH° (−3.20 kJ mol⁻¹) indicates exothermic nature of adsorption. FTIR analysis and SEM observations of IRS and PHCl adsorbed IRS were also carried out. Sorption experiments indicate that IRS may be used effectively for the adsorption of PHCl.     

Natural abundance C REDOR coupled to a singly N-labeled nucleus: simultaneous determination of interatomic distances in crystalline ammonium [N] -glutamate monohydrate

REDOR technique was applied to natural abundance ¹³C nuclei coupled to a singly labeled ¹⁵N nucleus to determine the ¹³C, ¹⁵N interatomic distances simultaneously in crystalline ammonium [¹⁵N] -glutamate monohydrate (1). Consequently, the interatomic C–N distances between ¹⁵N and ¹³C=O, ¹³C_α, ¹³C_β, ¹³C_γ, and ¹³C_δ carbon nuclei for 1 were determined with a precision of ±0.15 Å, after the experimental conditions such as the location of samples in the rotor, length of π pulse etc. were carefully optimized. ¹³C-REDOR factors for three spin system, (ΔS/S₀)_CN1N2, and the sum of two isolated 2-spin system, (ΔS/S₀)^*=(ΔS/S₀)_CN1+(ΔS/S₀)_CN2, were further evaluated by the REDOR measurements on isotopically diluted 1 in a controlled manner. Subsequently, the intra- and intermolecular C–N distances were separated by searching the minima in the contour map of root mean square deviation (RMSD) between the theoretically and experimentally obtained (ΔS/S₀)^* values against two interatomic distances, r_C–N1 and r_C–N2. When the intramolecular C–N distance (r_C–N1) of the particular carbon nucleus is substantially shorter than the intermolecular one (r_C–N2), C–N distances within a single molecule were obtained with an accuracy of ±0.06 Å as in the cases of C=O, C_α and C_β carbon nuclei. C–N distances between the molecule in question and the nearest neighboring molecules can be also obtained, although accuracy was lower. On the contrary, it was difficult to determine the interatomic distances in the same molecule when the intermolecular dipolar contribution is larger than the intramolecular one as in the case of C_δ carbon nucleus.     

Structures, vibrational frequencies, and electron affinities of SF5On/SF5On (n = 1–3)

The molecular structures, vibrational frequencies, and electron affinities of the SF₅O_n/SF₅O_n⁻ (n = 1–3) species have been examined with four hybrid density functional theory (DFT) methods. The basis set used in this work is of double-ζ plus polarization quality with additional diffuse s- and p-type functions, denoted DZP++. The geometries are fully optimized with each DFT method independently. The SF₅O_n (n = 1–3) species should be potential greenhouse gases. The anion SF₅O₂⁻ with C_s symmetry has a ³A″ electronic state, and the neutral SF₅O₃ with ²A″ electronic state has C_s symmetry. The anions SF₅O₂⁻ and SF₅O₃⁻ should be regarded as SF₅⁻·O₂ and SF₅O⁻·O₂ complexes, respectively. Three different types of the neutral–anion energy separation presented in this work are the adiabatic electron affinity (EA_ad), the vertical electron affinity (EA_vert), and the vertical detachment energy (VDE). The EA_ad values predicted by the B3PW91 method are 5.22 (SF₅O), 4.38 (SF₅O₂), and 3.61 eV (SF₅O₃). Compared with the experimental vibrational frequencies, the BHLYP method overestimates the frequencies, and the other three methods underestimate the frequencies. The bond dissociation energies D_e (SF₅O_n → SF₅O_n−m + O_m) for the neutrals SF₅O_n and D_e (SF₅O_n⁻ → SF₅O_n−m⁻ + O_m and SF₅O_n⁻ → SF₅O_n−m + O_m⁻) for the anions SF₅O_n⁻ are reported.     

Voltammetric studies on the α-tocopherol anion and α-tocopheroxyl (Vitamin E) radical in acetonitrile

The α-tocopheroxyl radical was generated voltammetrically by one-electron oxidation of the α-tocopherol anion (E ^r_1/2=−0.73 V versus Ag|Ag⁺) that was prepared by reacting α-tocopherol with Et₄NOH in acetonitrile (with Bu₄NPF₆ as the supporting electrolyte). Cyclic voltammograms recorded at variable scan rates (0.05–10 V s⁻¹), temperatures (−20 to 20°C) and concentrations (0.5–10 mM) were modelled using digital simulation techniques to determine the rate of bimolecular self-reaction of α-tocopheroxyl radicals. The k values were calculated to be 3×10³ l mol⁻¹ s⁻¹ at 20°C, 2×10³ l mol⁻¹ s⁻¹ at 0°C and 1.2×10³ l mol⁻¹ s⁻¹ at −20°C. In situ electrochemical-EPR experiments performed at a channel electrode confirmed the existence of the α-tocopheroxyl radical.     

Recombination of KrD and XeD ions with electrons

Recombination rate coefficients of protonated and deuterated ions KrH⁺, KrD⁺, XeH⁺ and XeD⁺ were measured using Flowing Afterglow with Langmuir Probe (FALP). Helium at 1600 Pa and at temperature 250 K was used as a buffer gas in the experiments. Kr, Xe, H₂ and D₂ were introduced to a flow tube to form the desired ions. Because of small differences in proton affinities of Kr, D₂ and H₂ mixtures of ions, KrD⁺/D₃⁺ and KrH⁺/H₃⁺ are formed in the afterglow plasma, influencing the plasma decay. To obtain a recombination rate coefficient for a particular ion, the dependencies on partial pressures of gases used in the ion formation were measured. The obtained rate coefficients, α_KrD+(250 K) = (0.9 ± 0.3) × 10⁻⁸ cm³ s⁻¹ and α_XeD+(250 K) = (8 ± 2) × 10⁻⁸ cm³ s⁻¹ are compared with α_KrH+(250 K) = (2.0 ± 0.6) × 10⁻⁸ cm³ s⁻¹ and α_XeH+(250 K) = (8 ± 2) × 10⁻⁸ cm³ s⁻¹.     

The effect of carbonyl complexation on highly exothermic vanadium oxidation reactions

The effects of CO complexation on highly exothermic vanadium oxidation reactions is evaluated. We study the chemiluminescent (CL) reaction products formed when vanadium vapor entrained in Ar or CO is oxidized by O₃ or NO₂. The multiple collision V+Ar+O₃→VO^*(C ⁴Σ⁻, ⁴Φ, ²X)+Ar+O₂ reactive encounter yields two previously unreported VO excited states, whereas the V+Ar+NO₂→VO^*+Ar+NO reactive encounter populates states up to and including VO^* C ⁴Σ⁻. The multiple collision V+nCO+O₃ reactive encounter would appear to form a VOCO excited state complex, emitting in the region 420–560 nm, via the formation and oxidation of V(CO)₂ viz. V(CO)₂+O₃→VOCO^*+CO+O₂ and a relaxed VO excited state emitter via V+nCO+O₃→VO^*+nCO+O₂ where the VO excited state excitation is mediated by V–CO complexation. In complement, the much less exothermic V–NO₂ encounter displays an emission which, in concert with previous studies of CO complexation, suggests the formation of a VO(CO)₂ excited state complex viz. V(CO)₂+NO₂→VO(CO)₂^*+NO. The experiments characterizing CL are complemented by comparative laser-induced fluorescence studies of the VO X ⁴Σ⁻–CO and Ar interactions and their influence on the VO C ⁴Σ⁻–X ⁴Σ⁻ laser-induced excitation spectrum. These studies, in conjunction with further attempts to excite LIF in the 420–560 nm region, suggest that the observed complex emissions result primarily from VO excited state interactions. Complementary time-of-flight mass spectroscopy of vanadium and vanadium-oxide–carbonyl complex formation demonstrates the formation of V(CO), V(CO)₂, V₂(CO), and VOCO, the latter three of which demonstrate clear metastable-ion dissociation peaks for the processes VOCO⁺→V⁺+CO₂, V(CO)₂⁺→V⁺+2CO, and V₂(CO)⁺→V₂⁺+CO, suggesting that these vanadium complexes when formed in a reaction-based environment may be photodissociated with light in the visible and ultraviolet regions.     

Determination of Erbium by Two-Color Three-Photon Resonance Ionization Mass Spectrometry

Excited states and autoionization states of the erbium atom were investigated by the use of multicolor resonance ionization mass spectrometry. Among the observed first excited states, a level [4f¹²(³H₆)6s6p(³P₁)] located 17,348 cm⁻¹from the ground state is regarded as the most efficient state for excitation within the wavelength range investigated (560–600 nm), while a level located 17,080 cm⁻¹from this first excited state (E= 34,458 cm⁻¹) is identified as the best second excited state for the optimal photoionization scheme. Many ionization schemes adopting an autoionization state are also investigated, and the most efficient scheme is identified as 4f¹²6s²(³H₆) → 4f¹²(³H₆)6s6p(³P₁⁰), 17,348 cm⁻¹→ 34,458 cm⁻¹→ continuum state, which corresponds to the two-color (ω₁+ ω₂+ ω_1,2) scheme. Various concentrations of standard solutions for erbium are determined and the minimum amount detectable by two-color three-photon ionization was determined to be 20 pg.     

The O–H···O, O–H···N and C–H···O hydrogen bonds in 1,4-dimethylpiperazine mono-betaine monohydrate

1,4-Dimethylpiperazine mono-betaine (1-carboxymethyl-1,4-dimethylpiperazinium inner salt, MBPZ) crystallizes as monohydrate. The crystals are orthorhombic, space group Pccn. Two MBPZ molecules and two water molecules form a cyclic oligomer, (MBPZ·H₂O)₂. The O–H···O and O–H···N hydrogen bonds are of 2.769(1) and 2.902(1) Å, respectively. The dimers interact with the neighboring molecules through the C–H···O hydrogen bonds of 3.234(1) Å. The piperazine ring assumes a chair conformation with the N(4)–CH₃ and N⁺(1)–CH₂COO⁻ groups in the equatorial position and the N⁺(1)–CH₃ group in the axial one. The FTIR spectrum is compared with that calculated by the B3LYP/6-31G(d,p) level of theory.     

Thermophysical properties of 1-hexyl-3-methyl imidazolium based ionic liquids with tetrafluoroborate, hexafluorophosphate and bis(trifluoromethylsulfonyl)imide anions

The thermophysical properties of 1-hexyl-3-methyl imidazolium based hydrophobic room temperature ionic liquids (RTILs); with tetrafluoroborate (BF₄), hexafluorophosphate (PF₆), and bis(trifluoromethylsulfonyl)imide (Tf₂N) anions, namely density ρ (298.15 to 348.15) K, dynamic viscosity η (288.2 to 348.2) K, surface tension σ (298.15 to 338) K, and refractive index n_D (302.95 to 332.95) K have been measured. The coefficients of thermal expansion α_p values were calculated from the experimental density data using an empirical correlation. The thermal stability of all ILs is also investigated at two different heating rates (10 and 20) °C · min⁻¹) using thermogravimetric analyzer (TGA). The experimental results presented in this study reveal that the choice of anion type shows the most significant effect on the properties of ILs. The chloride and water contents of ILs (as impurities) are also investigated and reported in the present work.     

Electrochemical and spectroscopic study of vitamin D2 by in situ thin layer CD spectroelectrochemistry

The electrooxidation of vitamin D₂ (VD₂) was studied by cyclic voltammetry and in situ circular dichroic (CD) spectroelectrochemistry for the first time. The mechanism of electrooxidation and some useful kinetic and adsorption parameters were obtained. The results showed that the oxidation of VD₂ in ethanol solution is an irreversible diffusion controlled process following a weak adsorption of the electroinactive product at a glassy carbon electrode, which blocks the electrochemical reaction. The electrooxidation occurs mainly at the triene moieties of the VD₂ molecule. The CD spectroelectrochemical data were treated by the double logarithm method together with nonlinear regression, from which the formal potential E⁰=1.08 V, αn=0.245, the standard electrochemical rate constant k⁰=4.30(±0.58)×10⁻⁴ cm s⁻¹, and the adsorption constant β=1.77(±0.25) were obtained.     

The standard partial molar entropy of the aqueous tetra-n-butylammonium cation

The standard partial molar entropy of the aqueous tetrabutylammonium cation, not known previously, has now been obtained, based on the molar entropy of two of its crystalline salts, the iodide and the tetraphenylborate, recently determined experimentally for this purpose. The calculation required also published molar enthalpies of solution and solubilities of these two salts as well as of the perchlorate. The choice of the anions depended mainly on the limited solubilities of the examined salts in water, facilitating the estimation of the relevant activity coefficients. The result is S^∞(Bu₄N⁺, aq) = (380 ± 20) J · K⁻¹ · mol⁻¹ at T = 298.15 K, on the mol · dm⁻³ scale and based on S^∞(H⁺, aq) = (−22.2 ± 1.2) J · K⁻¹ · mol⁻¹ (yielding the ‘absolute’ value). The molar entropy of this cation in the ideal gas standard state, S(Bu₄N⁺, g) = (798 ± 8) J · K⁻¹ · mol⁻¹ then yielded the molar entropy of hydration Δ_hydS^∞ (Bu₄N⁺) = (−418 ± 23) J · K⁻¹ · mol⁻¹.     

A Kinetic and Mechanistic Study on Substitution of Aqua Ligands from <Emphasis Type="Italic">cis</Emphasis>-diaqua-<Emphasis Type="Italic">bis</Emphasis>-(bipyridyl)-ruthenium(II) Complex by Thiosemicarbazide in Aqueous Medium

The kinetics of the interaction of thiosemicarbazide with cis-[Ru(bipy)₂(H₂O)₂]²⁺ (bipy = α α′-bipyridyl) have been studied spectrophotometrically as a function of [Ru(bipy)₂(H₂O)₂²⁺], [bipyridyl] and temperature, at a particular pH (4.8), where the substrate complex exists predominantly as the diaqua species and thiosemicarbazide as the neutral ligand. The reaction proceeds via an outer sphere association complex formation, followed by two slow consecutive steps. The first is the conversion of the aforementioned complex into the inner sphere complex, and the second step involves the entrance of another thiosemicarbazide molecule in the coordination zone of Ru(II) whereby, in each step, an aqua ligand is replaced. The association equilibrium constant (K_E) for the outer sphere complex formation has been evaluated together with rate constants for the two subsequent steps. Activation parameters have been calculated for both steps using the Eyring equation (ΔH₁^# = 25.37±1.6 kJ mol⁻¹, ΔS₁^# = −215.48 ± 4.5 J K⁻¹ mol⁻¹, ΔH₂^# = 24.24 ± 1.1 kJ mol⁻¹, ΔS₂^# = −207.14 ± 3.0 J K⁻¹ mol⁻¹). The low enthalpy of activation and large negative value of entropy of activation indicate an associative mode of activation for both aqua ligand substitution processes. From the temperature dependence of K_E, the thermodynamic parameters calculated are: ΔH⁰ = 10.75±0.54 kJ mol⁻¹ and ΔS⁰ = 84.67 ± 1.75 J K⁻¹ mol⁻¹, which give a negative ΔG⁰ value at all temperatures studied, supporting the spontaneous formation of an outersphere association complex prior to the first step.