EXAFS study of mercury(II) sorption to Fe- and Al-(hydr)oxides. I. Effects of pH

The study of mercury sorption products in model systems using appropriate in situ molecular-scale probes can provide detailed information on the modes of sorption at mineral/water interfaces. Such studies are essential for assessing the influence of sorption processes on the transport of Hg in contaminated natural systems. Macroscopic uptake of Hg(II) on goethite (alpha-FeOOH), gamma-alumina (gamma-Al(2)O(3)), and bayerite (beta-Al(OH)(3)) as a function of pH has been combined with Hg L(III)-edge EXAFS spectroscopy, FTIR spectroscopy, and bond valence analysis of possible sorption products to provide this type of information. Macroscopic uptake measurements show that Hg(II) sorbs strongly to fine-grained powders of synthetic goethite (Hg sorption density Gamma=0.39-0.42 micromol/m(2)) and bayerite (Gamma=0.39-0.44 micromol/m(2)), while sorbing more weakly to gamma-alumina (Gamma=0.04-0.13 micromol/m(2)). EXAFS spectroscopy on the sorption samples shows that the dominant mode of Hg sorption on these phases is as monodentate and bidentate inner-sphere complexes. The mode of Hg(II) sorption to goethite was similar over the pH range 4.3-7.4, as were those of Hg(II) sorption to bayerite over the pH range 5.1-7.9. Conversion of the gamma-Al(2)O(3) sorbent to a bayerite-like phase in addition to the apparent reduction of Hg(II) to Hg(I), possibly by photoreduction during EXAFS data collection, resulted in enhanced Hg uptake from pH 5.2-7.8 and changes in the modes of sorption that correlate with the formation of the bayerite-like phase. Bond valence calculations are consistent with the sorption modes proposed from EXAFS analysis. EXAFS analysis of Hg(II) sorption products on a natural Fe oxyhydroxide precipitate and Al/Si-bearing flocculent material showed sorption products and modes of surface attachment similar to those for the model substrates, indicating that the model substrates are useful surrogates for the natural sediments.     

Mercury(II) Sorption on Nickel(II) Hydroxide: Influence of Halide Ion Concentration and pH of the Solutions

Sorption of Hg(II) on -Ni(OH)₂ was studied as influenced by chloride ion concentration and pH of the solutions, affecting the Hg(II) speciation. The sorption mechanism was considered.     

A microcalorimetric study of mercury(II) sorption on KU-2-8 sulfocationite

The thermokinetic characteristics of the sorption of mercury(II) ions on KU-2-8 strongly acidic cationite from mercury acetate solutions was studied using microcalorimetry. The overall heat of sorption and its dependence on the degree of filling of the cationite were determined.     

Reaction of mercury (II) dibromide with tris(n-butyl) phosphine telluride: Formation of an unusual (Hg Te)3 ring system

Tris(n-butyl)phosphine telluride (R₃PTe) yields, with HgBr₂ from acetone solution, a very thermally and air sensitive crystalline solid. This solid has been identified as (HgBr₂)₄ · (TePR₃)₃. X-ray diffraction analysis reveals that this compound contains a dimeric cation, [(HgTePR₃)₃Br₅]²⁻₂, in which each unit is characterized by a six-membered ring made of alternating bonds between mercury and tellurium. The counter ion is a di-nuclear anion [Hg₂Br₀]²⁻. The crystal belongs to the triclinic system, P1 group with a = 12.206(9) A, b = 17.613(10) A, c = 18.065(9) A, and Z = 2. The preparation of this new heterocyclic system and its decomposition under different conditions into Hg₃Te₂Br₂ or HgTe are presented. © 1996 John Wiley & Sons, Inc.     

Photometric titrations of mercury(II) based on UV-absorption of mercury(II)-complexes

Summary A method is described for the complexometric determination of traces of mercury(II) with EDTA, EGTA and DTPA, with photometric endpoint indication. Titrations with EDTA and EGTA appeared to be possible only if acetylacetone was added. The wavelength used in that case was 275 nm. With DTPA a direct titration is possible at 260 nm. At p_H 2 determinations of 2·10^–5 M mercury(II) are possible with good accuracy.

---

Zusammenfassung Eine komplexometrische Bestimmung von Spuren Quecksilber(II) mit ÄDTA, ÄGTA und DTPA wurde beschrieben. Die Endpunktanzeige erfolgte photometrisch. Titrationen mit ÄDTA und ÄGTA waren nur möglich in Anwesenheit von Acetylaceton. In diesem Fall war die verwendete Wellenlänge 275 nm. Mit DTPA sind auch direkte Titrationen möglich bei 260 nm. Bei p_H 2 sind Analysen von 2·10^–5-m Lösungen mit guter Genauigkeit durchführbar.

     

Water sorption in poly(ammonium sulfopropylbetaines). II. Sorption isotherms

Water sorption by four amorphous acrylic and methacrylic poly(zwitterions) bearing ammonium sulfopropylbetaine side groups () was studied at a constant temperature of 23°C and over a broad range of water activity (0.14-0.90). Whatever the physical state of the hydrated polymer, glassy or viscoelastic, water diffusion is Fickian (average diffusion coefficient D?_s in the range 2-16 × 10^?8 cm² s^?1), and the sorption isotherms may be quantitatively analyzed according to the Guggenheim-Anderson-De Boer amended BET equation for multilayer sorption processes. The number of sitebound water molecules per monomeric unit is in the range 1.5–2.0, and apparently there is no great energy difference between direct site binding and indirect binding in the successive solvation layers. The polymer-water interaction parameter (?0.6 < χ Flory < 0.6) is an increasing function of the water content of the hydrated poly(zwitterions) over the whole composition range (water volume fraction < 0.5), without any clear transition from the glassy to the viscoelastic state. Clustering of water molecules (Zimm-Lundberg theory) is never observed, even at high water content. Because of the charged structure of their dipolar units, the poly(zwitterions) show a water sorption process similar to that of the corresponding poly(electrolytes) of the tetra-alkylammonium sulfonate type. © 1992 John Wiley & Sons, Inc.     

Sorption of Iron(II) on Ferromanganese Nodules

The dynamic capacity, specific surface area, grindability, and wearability of filter materials based on pyrolusite were determined. The dynamic capacity of ferromanganese nodules was compared with the capacity of imported filter materials.__________Translated from Zhurnal Prikladnoi Khimii, Vol. 78, No. 4, 2005, pp. 599-605.Original Russian Text Copyright © 2005 by Chirkst, Cheremisina, Ivanov, Chistyakov.     

Sorption of palladium(II) on stannous ferrocyanide

A fine-crystalline stannous ferrocyanide (SCF) has been prepared by adding tin(II) chloride to potassium hexacyanoferrate(II) solution. The material was characterized by chemical analysis, thermogravimetry, X-ray diffraction and infrared spectra. The solubility of SCF, kinetics and sorption mechanism of palladium in hydrochloric acid solutions were investigated. The palladium exchange capacity of 2.20 mM/g dry weight have been found.     

Rhodanine complexes of zinc(II), cadmium(II), mercury(II) and mercury(I)

The following rhodanine (HRd) complexes of zinc(II), cadmium(II), mercury(II) and mercury(I) have been prepared and studied by i.r. spectra: M(Rd)₂(NH₃)₂ (MZn, Cd) with a 4N,2S-six-coordination; Zn₃(Rd)₄(CH₃COO)(OH), Cd₂(Rd)₃(HRd)₃(CH₃COO)(H₂O) in which the acetato anion is bicoordinated; Hg(Rd)₂, Hg₂(HRd)₃(BF₄)₂·0.5(HAc or EtOH), Hg(HRd)(CF₃COO)₂·H₂O in which both the ligands HRd and Rd⁻ are S,N-bonded to the metal; Hg(HRd)₂Cl₂, Hg(HRd)₄(ClO₄)₂ in which the ligand HRd is S-bonded; Hg₃(Rd)₃ · NH₃ with S,N-bonded Rd⁻ ligand.     

EXAFS study of mercury(II) sorption to Fe- and Al-(hydr)oxides. II. Effects of chloride and sulfate

Common complexing ligands such as chloride and sulfate can significantly impact the sorption of Hg(II) to particle surfaces in aqueous environmental systems. To examine the effects of these ligands on Hg(II) sorption to mineral sorbents, macroscopic Hg(II) uptake measurements were conducted at pH 6 and [Hg](i)=0.5 mM on goethite (alpha-FeOOH), gamma-alumina (gamma-Al(2)O(3)), and bayerite (beta-Al(OH)(3)) in the presence of chloride or sulfate, and the sorption products were characterized by extended X-ray absorption fine structure (EXAFS) spectroscopy. The presence of chloride resulted in reduced uptake of Hg(II) on all three substrates over the Cl(-) concentration ([Cl(-)]) range 10(-5) to 10(-2) M, lowering Hg surface coverages on goethite, gamma-alumina, and bayerite from 0.42 to 0.07 micromol/m(2), 0.06 to 0.006 micromol/m(2), and 0.55 to 0.39 micromol/m(2) ([Cl(-)]=10(-5) to 10(-3) M only), respectively. This reduction in Hg(II) uptake is primarily a result of the formation of stable, nonsorbing aqueous HgCl(2) complexes in solution, limiting the amount of free Hg(II) available to sorb. At higher [Cl(-)] beam reduction of Hg(II) to Hg(I) was observed, resulting in the possible formation of aqueous Hg(2)Cl(2) species and the precipitation of calomel, Hg(2)Cl(2(s)). The presence of sulfate caused enhanced Hg(II) uptake over the sulfate concentration ([SO(4)(2-)]) range 10(-5) to 0.9 M, increasing Hg surface coverages on goethite, gamma-alumina, and bayerite from 0.39 to 0.45 micromol/m(2), 0.11 to 0.38 micromol/m(2), and 0.36 to 3.33 micromol/m(2), respectively. This effect is likely due to the direct sorption or accumulation of sulfate ions at the substrate interface, effectively reducing the positive surface charge that electrostatically inhibits Hg(II) sorption. Spectroscopic evidence for ternary surface complexation was observed in isolated cases, specifically in the Hg-goethite-sulfate system at high [SO(4)(2-)] and in the Hg-goethite-chloride system.     

Sorption of Hexacyanoferrate(II,III) Anions on Nickel(II) Hydroxide

Fe(CN)₆ ^{3 -} and Fe(CN)₆ ^{4 -} anions are sorbed from aqueous solutions of their potassium and cesium salts on -Ni(OH)2 by the mechanism of anion exchange with hydroxy groups. Alkali metal cations (K⁺, Cs⁺) are also partly sorbed on nickel(II) hydroxide in the form of anionic complexes (K,Cs) _z Fe(CN)₆ ^{(n - z)-}, where n = 3 or 4 (0 < z < n). The chemical composition of the new phase appearing in contact of nickel(II) hydroxide with aqueous potassium and cesium hexacyanoferrates(II, III) was determined by X-ray phase analysis and IR spectroscopy.     

Electrolyte and pH effects on Pb(II)-calcite sorption processes: the role of the PbCO0 (3aq) complex

Batch sorption experiments were conducted under conditions of ambient temperature and atmospheric PCO2g to determine the effects of electrolyte type, ionic strength, and pH on Pb(II) interactions with calcite. For 0.15 M nitrate and chloride solutions at pH 8.2, no significant effect of electrolyte type on Pb sorption was observed. Varying ionic strength from 0.15 to 0.5 M produced little effect on Pb sorption in nitrate compared to chloride solutions in which Pb uptake decreased with increasing ionic strength. For a pH range of 7.3-9.4 in 0.15-0.2 M nitrate solutions, Pb sorption increased from pH 7.3 to 8.5 with a subsequent decrease in uptake out to pH 9.4. The trends in electrolyte and pH experiments correlate well with those for PbCO0(3aq) speciation, indicating that this metal-ligand complex in solution dictates Pb sorption in the system under investigation.     

Crystallographic report: Bis(pyrrolinedithiocarbamato)mercury(II)

The mononuclear structure of Hg(S₂CN(CH₂)₄)₂ has crystallographically imposed twofold symmetry and features chelating dithiocarbamate ligands that form asymmetric Hg? S bond distances leading to a heavily distorted tetrahedral geometry. Copyright © 2003 John Wiley & Sons, Ltd.     

pH effect on phosphate sorption by crystalline MnO(2)

The phosphate anions sorption on manganese dioxide was studied as a function of pH in the range 3-9 and at 293 K. The sorption was observed to increase with the increase in concentration of phosphate and decrease with the increase in pH. No effect of the phosphate adsorption upon the PZC of the solid suggested that the only outer sphere complexes were formed on the surface of the solid. The potentiometric titrations studies of the solid were also performed in the presence of different phosphate concentrations (0.53, 1.053, and 2.11 mmol L(-1)). The calculated pKa values showed that the solid protonation played a dominant role in the uptake of phosphate anions by the solid.     

Sorption of Water-Soluble Copper(II) Compounds on Clinoptilolite

Copper(II) sorption on clinoptilolite from aqueous solutions with different pH was studied. The results were analyzed using the calculated distribution of water-soluble copper(II) species at different pH. The best conditions of copper(II) sorption on clinoptilolite from aqueous solutions were determined.     

On the pH dependence of Cu(II) binding to insulin: ESR and electronic studies

The ESR and electronic absorption spectra have been used to investigate co-ordination of Cu(II) to insulin in aqueous solutions at different pH. Two series of complexes with low- and high copper content were examined and the values of the magnetic tensor components and the shape of the diffuse reflectance transitions suggested that these copper-insulin derivatives have tetragonal symmetry with Cu(II) in a (N_xO_y) ligand field, where oxygen donor groups are predominant at low pH and nitrogenous ligands at high pH. Such a trend was further supported by the presence of superhyperfine structure at pH = 13. Oxygen of the carboxylato groups, nitrogen of α- and ε-amino groups and of imidazoles, all contribute to the coordinations field. At very high pH only, a preferential binding site for Cu(II) is found, which probably involves deprotonated peptide nitrogens.     

Metallatriazadiphosphorines of zinc(II), cadmium(II) and mercury(II)

Metallatriazadiphosphorine complexes corresponding to [{N(PPh₂NR)₂}M(OAc)] and [{N(PPh₂NR)₂}₂M], (R = Ph or SiMe₃; M = Zn, Cd or Hg) have been synthesized under strictly anhydrous and inert conditions by the reaction of the acyclic bis-silylated phosphazene ligand, [HN(PPh₂NSiMe₃)₂], or the bis-phenylated phosphazene ligand, [HN(PPh₂NPh)₂], with Zn, Cd and Hg acetate in 1:1 and 2:1 molar ratios. These complexes are highly soluble in common organic solvents, but unstable hydrolytically as well as thermally, even under reduced pressure. Molecular weight determinations in benzene indicated the monomeric nature of these complexes. Further, they have been characterized on the basis of elemental analysis and spectral studies: i.r. and n.m.r. (¹H, ¹³C and ³¹P) that plausibly reveal a trigonal planar and tetrahedral geometry around the metal atom in the complexes.