Kiwifruit Actinidin: A Proper New Collagenase for Isolation of Cells from Different Tissues

Actinidin is a cysteine protease abundant in Kiwifruit. This enzyme is known as a meat-tenderizing protease. In this project, actinidin was purified from kiwifruit by salt precipitation and ion exchange chromatography. Collagenolytic effect of the purified enzyme was tested in four different buffer systems. Thereafter, the enzyme was used for isolation and culture of cells from three different tissues: endothelial cells from human umbilical vein, hepatocytes from rat liver, and thymic epithelial cells from rat thymus. Our results revealed that actinidin can hydrolyze collagen types I and II at neutral and alkaline buffers. Furthermore, actinidin compared with type II or IV collagenase isolated intact human umbilical vein endothelial cells, hepatocytes, and thymic epithelial cells with viability more than 90%. These results address a novel and valuable collagenase, which can be used efficiently for hydrolysis of collagen and isolation of different cell populations from various solid tissues.     

Precipitation from mixed solvents—I aluminium 8-hydroxyquinolate

The precipitation of aluminium 8-hydroxyquinolate from a buffered acetone-water system has been effected by the volatilisation of the acetone. The use of this procedure results in a precipitate with physical characteristics superior to that obtained in the conventional manner and allows more efficient separation from interfering cations. Separations of 10-mg quantities of aluminium from an equal amount of cadmium as well as separations of 25-mg quantities of aluminium from at least 420 mg of magnesium and twice that amount of calcium can easily be accomplished. These results compare favourably with those obtained by hydrolysis of 8-acetoxyquinoline. A procedure is described for the quantitative determination of 2–10 mg of aluminium.     

A novel method of metal ion removal and recovery from water by complex formation with polyelectrolytes

A novel method of metal removal and recovery and recovery is described. This method may be useful in connection with various types of water pollution. It is based on the fact that metal ions form water-soluble complexes with water-soluble polyelectrolytes, such as polyacids. These complexes can be precipitated with polybases and the metal can be recovered by treating the precipitate with mineral acid. The remaining polymer complex can be used again for further precipitation. Experiments with Cu²⁺ and Co²⁺ ions are given in some detail; general observations concerning other cases are included.     

Selective precipitation of rare earth orthophosphates with hydrogen peroxide from phosphoric acid solutions

It has been shown for the first time that the use of hydrogen peroxide allows precipitation of rare earth orthophosphates (La–Tb) from phosphoric acid solutions at temperatures below 100°C. Either anhydrous or hydrated orthophosphates with monazite or rhabdophane structure, respectively, can be obtained depending on rare earth element position in lanthanide series and precipitation conditions (orthophosphoric acid and hydrogen peroxide concentration). Hydrated orthophosphates with rhabdophane structure can be prepared by precipitation with hydrogen peroxide for all studied rare earth elements.     

Precipitation of zinc ammonium phosphate from homogeneous solution

Urea hydrolysis has been employed to raise the pH for homogeneous precipitation of zinc ammonium phosphate. From 30 to 100 mg of zinc can conveniently be determined by this technique (relative standard deviation 0.2% for 89 mg). The interference of nickel was minimized by using ammonium tartrate as masking agent, but copper could not be effectively masked with the same tartrate. Ammonium tartrate obtained from a different source was found to mask the copper more effectively. Investigations showed that the latter tartrate contained an appreciable amount of ammonium oxalate.     

Efficient Recycling of Gold and Copper from Electronic Waste by Selective Precipitation

The recycling of metals from electronic waste (e-waste) using efficient, selective, and sustainable processes is integral to circular economy and net-zero aspirations. Herein, we report a new method for the selective precipitation of metals such as gold and copper that offsets the use of organic solvents that are traditionally employed in solvent extraction processes. We show that gold can be selectively precipitated from a mixture of metals in hydrochloric acid solution using triphenylphosphine oxide (TPPO), as the complex [(TPPO)₄(H₅O₂)][AuCl₄]. By tuning the acid concentration, controlled precipitation of gold, zinc and iron can be achieved. We also show that copper can be selectively precipitated using 2,3-pyrazinedicarboxylic acid (2,3-PDCA), as the complex [Cu(2,3-PDCA-H)₂]_n ⋅ 2n(H₂O). The combination of these two precipitation methods resulted in the recovery of 99.5 % of the Au and 98.5 % of the Cu present in the connector pins of an end-of-life computer processing unit. The selectivity of these precipitation processes, combined with their straightforward operation and the ability to recycle and reuse the precipitants, suggests potential industrial uses in the purification of gold and copper from e-waste.     

Theory of titration curves : Points of minimum slope on potentiometric strong acid-strong base and precipitation titration curves

Strong acid-strong base and precipitation titration curves, like other kinds of potentiometric titration curves, inherently possess an inflection point where the slope is a minimum as well as one where it is a maximum. In any kind of titration the first of the inflection points can be caused to occur earlier, and can eventually be made to disappear altogether, by adopting certain expedients. For a weak acid-strong base titration, for example, these include decreasing the concentration of the acid titrated and titrating in the presence of an excess of its conjugate base. For strong acid-strong base and precipitation titrations they include decreasing the concentration of the substance titrated and increasing the concentration of the titrant. The conditions under which a physically significant inflection point of minimum slope can exist are defined, and explicit equations are given from which its position can be calculated under various experimental conditions, for strong acid-strong base and for both isovalent and heterovalent precipitation titrations.     

Inorganic Thin Films Prepared from Soluble Powders and Their Applications

Sol-gel processing has proved to be a useful method for the preparation of a wide range of inorganic thin films. However, gelation or precipitation of coating solutions and thus limited shelf-life have been drawbacks for the industrial application of this technology.Soluble powders of various compositions can be prepared from modified metal alkoxides commonly employed in sol-gel processing. Even though these powders contain a considerable amount of organic moieties they can be stored indefinitely under ambient conditions, thus diminishing shelf life problems. Redissolution in polar organic solvents, solvent mixtures or even water yields ready-to-use coating solutions. Coating solutions for the preparation of titania (TiO₂), zirconia (ZrO₂) and lead zirconate titanate (PbTi _x Zr_1–x O₃, PZT) films have been synthesized by this method. Thickness, microstructure and properties of the resulting films can be varied by modification of the solvent, the coating procedure and thermal treatment. Inorganic thin films for various applications have been prepared.     

An unusual isotopic fractionation of boron in synthetic calcium carbonate precipitated from seawater and saline water

Inorganic calcium carbonate precipitation from natural seawater and saline water at various pH values was carried out experimentally. The results show the clear positive relationships between boron concentration and δ11B of inorganic calcium carbonate with the pH of natural seawater and saline water. However, the variations of boron isotopic fractionation between inorganic calcite and seawater/saline water with pH are inconsistent with the hypothesis that B(OH)4- is the dominant spe-cies incorporated into the biogenic calcite structure. The isotopic fractionation factors α between synthetic calcium carbonate precipitate and parent solutions increase systematically as pH increases, from 0.9884 at pH 7.60 to 1.0072 at pH 8.60 for seawater and from 0.9826 at pH 7.60 to 1.0178 at pH 8.75 for saline water. An unusual boron isotopic fractionation factor of larger than 1 in synthetic calcium carbonate precipitated from seawater/saline water at higher pH is observed, which implies that a substantial amount of the isotopically heavier B(OH)3 species must be incorporated preferentially into synthetic inorganic carbonate. The results propose that the incorporation of B(OH)3 is attributed to the formation of Mg(OH)2 at higher pH of calcifying microenvironment during the synthetic calcium carbonate precipitation. The preliminary experiment of Mg(OH)2 precipitated from artificial seawater shows that heavier 11B is enriched in Mg(OH)2 precipitation, which suggests that isotopically heavier B(OH)3 species incorporated preferentially into Mg(OH)2 precipitation. This result cannot be applied to explain the boron isotopic fractionation of marine bio-carbonate because of the possibility that the unusual environment in this study appears in formation of marine bio-carbonate is infinitesimal. We, however, must pay more attention to this phenomenon observed in this study, which accidentally appears in especially natural environment.     

Evaluation of extraction procedures for 2‐DE analysis of aphid proteins

Protein sample preparation is a crucial step in a 2‐DE proteomics approach. In order to establish a routine protocol for the application of proteomics analysis to aphids, this study focuses on the specific protein extraction problems in insect tissues and evaluates four methods to bypass them. The approaches of phenol extraction methanol/ammonium acetate precipitation (PA), TCA/acetone precipitation, PEG precipitation, and no precipitation were evaluated for proteins isolation and purification from apterous adult aphids, Sitobion avenae. For 2‐DE, the PA protocol was optimal, resulting in good IEF and clear spots. PA method yielded the greatest amount of protein and displayed most protein spots in 2‐DE gels, as compared with the TCA/acetone precipitation, PEG precipitation and no precipitation protocols. Analysis of protein yield, image quality and spot numbers demonstrate that the TCA/acetone precipitation protocol is a reproducible and reliable method for extracting proteins from aphids. The PEG precipitation approach is a newly developed protein extraction protocol for aphids, from which more unique protein spots can be detected, especially for detection of acid proteins. These protocols are expected to be applicable to other insects or could be of interest to laboratories involved in insect proteomics, despite the amounts and types of interfering compounds vary considerably in different insects.     

Lysozyme purification from tobacco extract by polyelectrolyte precipitation

Tobacco is widely used as a model plant for feasibility studies of recombinant protein production from transgenic plants. However, dealing with large quantities of biomass to recover recombinant proteins is a challenge for down-stream processing. In this study, the effect of isoelectric precipitation on native tobacco protein was first studied. Among the three acids studied, hydrochloric acid is shown to be more effective than acetic or citric acid, and at pH 4, 60% of native tobacco protein was precipitated by HCl. Egg white lysozyme was used as the model protein to test the feasibility of polyelectrolyte precipitation in protein recovery from tobacco extract. Precipitation of lysozyme at pH 7 was shown ineffective probably because of the interference of polyphenolic acids. However, after isoelectric precipitation at pH 5 poly(acrylic) acid (PAA) was shown to precipitate 85% of the soluble lysozyme when the polymer dosage was increased to 1.5 mg polymer/mg lysozyme, while negligible amounts of native tobacco protein was co-precipitated. Lysozyme precipitation by PAA in tobacco extract obtained at pH 5 was also studied, and lysozyme yield was significant improved.     

Precipitation of nickel dimethylglyoximate

The homogeneous precipitation method of Salesin and Gordon and the aqueous acetone precipitation described by Jones and Howick are examined for the determination of nickel as the dimethylglyoximate and where applicable comparisons are made with a direct (conventional) precipitation of this substance. The co-predpitation of iron and cobalt was studied radiometrically under various experimental conditions. Relevant solubility data are also presented. Application of the methods to the determination of nickel in alloy steels showed that in the absence of cobalt there is little to choose between them. For cobalt steels the method of Jones and Howick is more convenient than that of Salesin and Gordon and more satisfactory than a conventional precipitation and gravimetric finish.     

High-performance liquid chromatographic-mass spectrometric analysis of oligosaccharides from enzymatic digestion of glycosaminoglycans. Application to human samples.

Glycosaminoglycan contents were evaluated in plasma and urine samples from volunteers treated intravenously with a mixture of dermatan sulphate and heparin, combining a novel liquid chromatographic-mass spectrometric technique for the determination of oligosaccharides from glycosaminoglycans with a classical technique for the extraction of glycosaminoglycans from biological samples (precipitation with cetylpyridinium chloride). In plasma samples dermatan sulphate and heparin can be measured for 2 h after treatment; urine excretion was detectable for 24 h. These results suggest that this novel approach is promising for future studies on the pharmacokinetics of glycosaminoglycans, although some technical aspects need further improvement, mainly regarding the procedures for sample clean-up; cetylpiridinium precipitation is a complex procedure and the recovery is limited.     

Synthesis of La-incorporated chitosan beads for fluoride removal from water

In this study, lanthanum incorporated chitosan beads (LCB) were synthesized using precipitation method and tested for fluoride removal from drinking water. The effect of various parameters like complexation and precipitation time, lanthanum loading and ammonia strength on fluoride removal have been studied. It is observed that the parameters for the synthesis of LCB have significant influence on development of LCB and in turn on fluoride removal capacity. The optimal condition for synthesis of LCB includes lanthanum loading: 10 wt%, complexation time: 60 min, precipitation time: 60 min, drying temperature: 75 °C for 72 h. The maximum fluoride adsorption capacity of LCB was found to be 4.7 mg/g and negligible release of lanthanum ion was observed. XRD analysis shows the presence of lanthanum hydroxide and amorphous nature of LCB. SEM of LCB shows the presence of oval lanthanum hydroxide particles spread over the chitosan matrix. Fluoride adsorption capacity has been calculated by applying Langmuir and Freundlich isotherms. The comparative study suggests that LCB shows four times greater fluoride adsorption capacity than the commercially used activated alumina.     

非溶剂添加剂对共聚砜铸膜液体系及膜性能与结构的影响

以含二氮杂萘酮结构的新型共聚砜为膜材料 ,通过浊点滴定法和特性粘数的测定研究了几种非溶剂添加剂对铸膜液体系的影响 .并由共聚砜 NMP 添加剂三组分相分离曲线数据计算了共聚砜的Θ溶剂中NMP与添加剂的比例 ,考察了添加剂EGME用量对共聚砜超滤膜结构和性能的影响 .发现当EGME NMP接近Θ组成时膜性能发生突变 ,在EGME NMP低于Θ组成时 ,膜的水通量随添加剂用量的增大而增大 ,截留率基本不变 .     

Isolation of ribosomes from cotton seeds

Summary 1. It has been established that the method of precipitation with ethanol in the presence of an increased concentration of Mg²⁺ can be used for the rapid isolation of the ribosome fraction from plant material.2. The optimum conditions for the complete precipitation of the ribosome fraction from a homogenate of cotton seeds have been selected.3. By treating an extract of the seeds with 0.5 M KCl it was possible to reduce the amount of tRNA in a preparation of the total rRNA.Institute of the Chemistry of Plant Substances, Academy of Sciences of the Uzbek SSR, Tashkent. Translated from Khimiya Prirodnykh Soedinenii, No. 6, pp. 852–856, November–December, 1977.     

Steps in Precipitation Reactions

The combined application of various methods of investigation (e.g. nephelometry, conductivity measurements, electron microscopy, isotope exchange, BET surface area determinations, paper chromatograhy, coprecipitation) lead to a refined insight into the course of precipitation reactions. The formation of a new solid phase within a solution can, in the case of ionic crystals, be formally described as proceeding via a number of steps – nucleation, growth, ripening, and recrystallization (aging) – which overlap in time. The precipitation of hydroxides is a more complex process since additional chemical reactions (e.g. hydrolysis, condensation reactions) take place within the newly formed solid phase.     

Precipitation of copper 8-hydroxyquinaldate from homogeneous solution

Copper can be precipitated quantitatively, over a wide range of pH, by 8-hydroxyquinaldine produced from the hydrolysis of 8-acetoxyquinaldine. The copper 8-hydroxyquinaldate can be weighed as either the monohydrate or the anhydrous dichelate. Differences in the appropriate pH conditions, between the PFHS and conventional precipitation methods, and between thorium and copper precipitations from homogeneous solution, are accounted for.     

Extraction of various additives from polystyrene and their subsequent analysis

Summary The extraction of fifteen polymer additives which are used as antioxidants, uv stabilizers, process lubes, flame retardants, and antistats from eight formulations of polystyrene is demonstrated with supercritical carbon dioxide and compared to traditional dissolution/precipitation extractions. The purpose of the study was two fold: 1) the development of a high performance liquid chromatography method(s) for the additives and 2) the determination of the viability of supercritical fluids for extraction of the additives from polystyrene. Nine of the additives were assayed via reversed phase liquid chromatography while, the remaining six additives could not be assayed in this manner. In order to develop an extraction method for the additives, the effects of static extraction time, CO₂ density, and temperature were first investigated. These preliminary extractions revealed that a static period which afforded an opportunity for the polymer to swell combined with a high CO₂ density and temperature above the polymer glass transition yielded quantitative recoveries of the additives. Triplicate extractions of the various polystyrene formulations matched additive recoveries obtained by the traditional dissolution/precipitation method but the former method was faster and used less organic solvent.     

Purification of 233U from Thorium and Iron in the Reprocessing of Irradiated Thorium Oxide Rods

A two step precipitation using ammonium carbonate and oxalic acid as the precipitants for thorium and iron is developed for the purification of ²³³U. Ammonium carbonate is added to the feed to increase the pH of the solution. The effect of pH on the solubility of U, Th and Fe in an excess of ammonium carbonate is studied. This indicates that the solubility of Th and Fe is minimum at pH 7 and the recovery of uranium is maximum. The effect of the concentration of thorium and iron on the recovery of uranium at pH 7 is studied. This indicates that the ammonium carbonate precipitation tolerates 2 g/l of thorium and 10 g/l of iron keeping losses of uranium to a minimum. If the feed solution contains more than a tolerable concentration of thorium the precipitation is followed in two steps: (1) Bulk of the thorium is removed by oxalate precipitation, (2) the remaining thorium and iron in the supernatant are removed by ammonium carbonate precipitation. A flow sheet is proposed for the purification of ²³³U from thorium and iron present in a strip product concentrate obtained during the reprocessing of irradiated thorium rods.