锆铪催化添加剂对PX液相氧化过程的影响

向对二甲苯(PX)催化氧化体系加入锆铪离子可有效地加速该反应过程．对锆铪离子与Co-Mn-Br催化剂体系的协同催化机理作了简要阐述，并对添加不同浓度下锆铪离子的催化作用进行了动力学实验．考察了添加锆和铪离子对主反应和燃烧副反应的影响，获得了锆铪离子添加剂对PX氧化过程的影响规律．研究发现，在实验所考察的温度与催化剂组成条件下，添加锆铪离子对反应过程中不同阶段的加速效果各不相同．且两种离子对燃烧副反应过程也有不同程度的加速作用．     

Solvent extraction separation of hafnium with 4-methyl-3-pentene-2-one

A new method for the extractive separation of hafnium from zirconium is presented. Zirconium is extracted with pure mesityl oxide from 4M nitric acid/4M sodium nitrate medium, followed by extraction of hafnium with mesityl oxide from 0.4M hydrochloric acid/2M ammonium thiocyanate medium. It is possible to accomplish clean separations of Hf from Zr in ratios from 1:20 to 1:200. The separation of hafnium from commonly associated elements such as scandium, yttrium, uranium, thorium, alkali and alkaline earth metals in 500:1 weight ratio to hafnium is also possible.     

Analysis of mixtures of hafnium and zirconium by the methylthymol blue-hydrogen peroxide method

The reaction of hydrogen peroxide with the zirconium(IV) and hafnium(IV) Methylthymol Blue complexes (MeMTB) has been investigated. The conditional stability constants of the Zr(IV) and Hf(IV) complexes with hydrogen peroxide [K'(Me(H(2)O(2)))] were determined spectrophotometrically. The K'(Me(H(2)O(2))) values found, which depend on the acidity, are 3.91 x 10(2) 3.24 x 10(2), 2.63 x 10(2) at [HCl] = 0.2, 0.3, 1.0M respectively for Me = Zr(IV) and 0.828, 0.523, 0.319 for Me = Hf(IV). The ratios of the conditional stability constants, K'(Me(H(2)O(2)))/ K'(MeMTB), are: 5.52 x 10(-4), 5.79 x 10(-4), 8.23 x 10(-4) for Me = Zr(IV) and 2.08 x 10(-6), 2.74 x 10(-6), 1.48 x 10 (-5) for Me = Hf(IV) at the three acidities. The maximum of the ratio of the relative conditional stability constants is obtained in 0.2M hydrochloric acid. The conditions which should be complied with for the determination of hafnium in the presence of zirconium are discussed. The results were compared with those obtained by the Xylenol Orange-hydrochloric acid method. They are superior for samples containing less than 20 mole% of hafnium in admixture with zirconium.     

Concentration, separation and determination of scandium, zirconium, hafnium and thorium with a silica-based sulphonic acid cation-exchanger

A study has been made of the dependence of the sorption of scandium, zirconium, hafnium and thorium from aqueous solutions with a silica-based sulphonic cation-exchanger (SCE-SiO(2)) on the concentration and nature of the acid medium, time of contact, concentration of the element, and the ionic strength. The selectivity decreases in the order Zr approximately Hf > Th > Sc > Fe(III). The sorption characteristics of silica gel and SCE-SiO(2) have been compared, and the sorption mechanism is discussed. The SCE-SiO(2) exchanger has been used for 100-fold concentration of scandium, zirconium, hafnium and thorium from their 10(-8)-10(-7) M solutions, and a spectrophotometric method has been developed for their determination with a detection limit of 0.5 ng/ml for Zr and Sc and 0.1 ng/ml for Hf and Th. Zirconium and hafnium have been determined in the solvent phase by X-ray fluorescence and atomic-emission methods.     

Behavior of zirconium and hafnium ions in ultramicroconcentrations investigated by horizontal zone electrophoresis in free electrolyte*

The electrophoresis of zirconium and hafnium ions in aqueous solutions was investigated. No-carrier-added ⁸⁸Zr and ¹⁷⁵Hf have been used in microconcentrations (10^-11M). The complexation of zirconium and hafnium with DTPA has been investigated in a large pH interval. The stability constants of the Zr-DTPA and Hf-DTPA complexes were determined for the first time by the method of horizontal zone electrophoresis in free electrolyte. The electrophoretic behavior of Zr(IV) and Hf(IV) ions in nitric acid solutions has also been studied.     

Synthesis and catalysis of di- and tetranuclear metal sandwich-type silicotungstates [(gamma-SiW10O36)2M2(mu-OH)2]10- and [(gamma-SiW10O36)2M4(mu4-O)(mu-OH)6]8- (M = Zr or Hf)

The di- and tetranuclear metal sandwich-type silicotungstates of Cs10[(gamma-SiW10O36)2{Zr(H2O)}2(mu-OH)2] x 18 H2O (Zr2, monoclinic, C2/c (No. 15), a = 25.3315(8) A, b = 22.6699(7) A, c = 18.5533(6) A, beta = 123.9000(12) degrees, V = 8843.3(5) A(3), Z = 4), Cs10[(gamma-SiW10O36)2{Hf(H2O)}2(mu-OH)2] x 17 H2O (Hf2, monoclinic, space group C2/c (No. 15), a = 25.3847(16) A, b = 22.6121(14) A, c = 18.8703(11) A, beta = 124.046(3) degrees, V = 8974.9(9) A(3), Z = 4), Cs8[(gamma-SiW10O36)2{Zr(H2O)}4(mu4-O)(mu-OH)6] x 26 H2O (Zr4, tetragonal, P4(1)2(1)2 (No. 92), a = 12.67370(10) A, c = 61.6213(8) A, V = 9897.78(17) A(3), Z = 4), and Cs8[(gamma-SiW10O36)2{Hf(H2O)}4(mu4-O)(mu-OH)6] x 23 H2O (Hf4, tetragonal, P4(1)2(1)2 (No. 92), a = 12.68130(10) A, c = 61.5483(9) A, V = 9897.91(18) A(3), Z = 4) were obtained as single crystals suitable for X-ray crystallographic analyses by the reaction of a dilacunary gamma-Keggin silicotungstate K8[gamma-SiW10O36] with ZrOCl2 x 8 H2O or HfOCl2 x 8 H2O. These dimeric polyoxometalates consisted of two [gamma-SiW10O36](8-) units sandwiching metal-oxygen clusters such as [M2(mu-OH)2](6+) and [M4(mu4-O)(mu-OH)6](8+) (M = Zr or Hf). The dinuclear zirconium and hafnium complexes Zr2 and Hf2 were isostructural. The equatorially placed two metal atoms in Zr2 and Hf2 were linked by two mu-OH ligands and each metal was bound to four oxygen atoms of two [gamma-SiW10O36](8-) units. The tertanuclear zirconium and hafnium complexes Zr4 and Hf4 were isostructural and consisted of the adamantanoid cages with a tetracoordinated oxygen atom in the middle, [M4(mu4-O)(mu-OH)6](8+) (M = Zr or Hf). Each metal atom in Zr4 and Hf4 was linked by three mu-OH ligands and bound to two oxygen atoms of the [gamma-SiW10O36](8-) unit. The tetra-nuclear zirconium and hafnium complexes showed catalytic activity for the intramolecular cyclization of (+)-citronellal to isopulegols without formation of byproducts resulting from etherification and dehydration. A lacunary silicotungstate [gamma-SiW10O34(H2O)2](4-) was inactive, and the isomer ratio of isopulegols in the presence of MOCl2 x 8 H2O (M = Zr or Hf) were much different from that in the presence of tetranuclear complexes, suggesting that the [M4(mu4-O)(mu-OH)6](8+) core incorporated into the POM frameworks acts as an active site for the present cyclization. On the other hand, the reaction hardly proceeded in the presence of dinuclear zirconium and hafnium complexes under the same conditions. The much less activity is possibly explained by the steric repulsion from the POM frameworks in the dinuclear complexes.     

Synthesis, characterization, and materials chemistry of Group 4 silylimides

This paper focuses on the development of potential single source precursors for M-N-Si (M = Ti, Zr or Hf) thin films. The titanium, zirconium, and hafnium silylimides (Me(2)N)(2)MNSiR(1)R(2)R(3) [R(1) = R(2) = R(3) = Ph, M = Ti(1), Zr (2), Hf (3); R(1) = R(2) = R(3) = Et, M = Ti (4), Zr (5), Hf (6); R(1) = R(2) = Me, R(3) = (t)Bu, M = Ti (7), Zr (8), Hf (9); R(1) = R(2) = R(3) = NMe(2), M = Ti (10), Zr (11), Hf (12)] have been synthesized by the reaction of M(NMe(2))(4) and R(3)R(2)R(1)SiNH(2). All compounds are notably sensitive to air and moisture. Compounds 1, 2, 4, and 7-10 have been structurally characterized, and all are dimeric, with the general formula [M(NMe(2))(2)(μ-NSiR(3))](2), in which the μ(2)-NSiR(3) groups bridges two four-coordinate metal centers. The hafnium compound 3 possesses the same basic dimeric structure but shows additional incorporation of liberated HNMe(2) bonded to one metal. Compounds 11 and 12 are also both dimeric but also incorporate additional μ(2)-NMe(2) groups, which bridge Si and either Zr or Hf metal centers in the solid state. The Zr and Hf metal centers are both five-coordinated in these species. Aerosol-assisted CVD (AA-CVD) using 4-7 and 9-12 as precursors generates amorphous films containing M, N, Si, C, and O; the films are dominated by MO(2) with smaller contributions from MN, MC and MSiON based on XPS binding energies.     

Oxygen-release/storage properties of Ce0.5M0.5O2 (M = Zr, Hf) oxides: interplay of crystal chemistry and electronic structure

Fluorite-type Ce0.5Zr0.5O2 and Ce0.5Hf0.5O2 have been synthesized by a solution combustion route, and their oxygen release and reduction have been investigated up to 850 degrees C. On reduction, the zirconium system forms two pyrochlore phases, Ce2Zr2O7 (pyrochlore-I) and Ce2Zr2O6.2 (pyrochlore-II), while the hafnium system forms only a disordered fluorite phase with the composition Ce0.5Hf0.5O1.77, under the same experimental conditions. The crystal structures of the reduction products have been characterized by powder X-ray diffraction and Rietveld refinement, and their electronic structures have been investigated by photoelectron spectroscopy and electrical conductivity measurements. Pyrochlore-I (a = 10.6727(4) A) is a semiconductor, while pyrochlore-II (a = 10.6463(8) A) is a good conductor (with a nearly temperature independent resistivity of approximately 2.5 ohm.cm in the 400-1000 K range). X-ray photoelectron spectroscopy (XPS) shows an admixture of Ce(5d,6s) with Zr(4d) and O(2p) and a significant density of states near EF in the highly reduced pyrochlore-II phase. The changes have been rationalized in terms of a qualitative energy band scheme that brings out the special role of zirconium vis-à-vis hafnium in the reduction/oxygen release properties of Ce0.5Zr0.5O2 and Ce0.5Hf0.5O2.     

Syntheses and X-ray crystal structures of zirconium(IV) and hafnium(IV) complexes containing monovacant wells-Dawson and Keggin polyoxotungstates

The syntheses and crystal structures of a series of zirconium(IV) and hafnium(IV) complexes with Dawson monovacant phosphotungstate [alpha2-P2W17O61](10-) and in situ-generated Keggin monovacant phosphotungstate [alpha-PW11O39](7-), which was obtained by a reaction of [alpha-PW12O40](3-) with Na2CO3, are described. K15H[Zr(alpha2-P2W17O61)2].25H2O (K-1), K16[Hf(alpha2-P2W17O61)2].19H2O (K-2), (Et2NH2)10[Zr(alpha-PW11O39)2].7H2O (Et2NH2-3), and (Et2NH2)10[Hf(alpha-PW11O39)2].2H2O (Et2NH2-4), being afforded by reactions in aqueous solutions of monolacunary Dawson and Keggin polyoxotungstates with ZrCl2O.8H2O and HfCl2O.8H2O followed by exchanging countercations, were obtained as analytically pure, homogeneous colorless crystals. Single-crystal X-ray structure analyses revealed that the Zr(IV) and Hf(IV) ions are in a square antiprismatic coordination environment with eight oxygen atoms, four of them being provided from each of the two monovacant polyanion ligands. Although the total molecular shapes and the 8-coordinate zirconium and hafnium centers of complexes 1-4 are identical, the bonding modes (bond lengths and bond angles) around the zirconium(IV) and hafnium(IV) centers were dependent on the monovacant structures of the polyanion ligands. Additionally, the characterization of complexes 1-4 was accomplished by elemental analysis, TG/DTA, FTIR, and solution (31P and 183W) NMR spectroscopy.     

Group IV imino-semiquinone complexes obtained by oxidative addition of halogens

An isostructural series of titanium, zirconium, and hafnium complexes, M[ap] 2L 2 (M = Ti, Zr, Hf; L = THF, pyridine), of the redox-active 4,6-di- tert-butyl-2- tert-butylamidophenolate ligand ([ap] (2-)) have been prepared. The zirconium and hafnium derivatives react readily with halogen oxidants such as XeF 2, PhICl 2, and Br 2, leading to products in which one-electron oxidation of each [ap] (2-) ligand accompanies halide addition to the metal center. Iodine proved to be too weak of an oxidant to yield the corresponding oxidative addition product, and under no conditions could halogen oxidative addition products be obtained for titanium. According to X-ray crystallographic studies, the zirconium and hafnium oxidation products are best formulated as MX 2[isq.] 2 ([isq.] (-) = 4,6-di- tert-butyl-2- tert-butylimino-semiquinonate; M = Zr, Hf; X = F, Cl, Br) species, in which the molecule is symmetric with each redox-active ligand in the semiquinone oxidation state. Temperature-dependent magnetization measurements suggest a singlet ( S = 0) ground-state for the diradical complexes with a thermally accessible triplet ( S = 1) excited state. Solution electron paramagnetic resonance (EPR) spectra are consistent with this assignment, showing both Delta m s = 1 and Delta m s = 2 transitions for the antiferromagnetically coupled electrons.     

A density‐functional theory approach to the separation of K2ZrF6 and K2HfF6 via fractional crystallization

Because of the low absorption cross‐section for thermal neutrons of zirconium (Zr) as opposed to hafnium (Hf), Zr‐metal must essentially be Hf‐free (<100 ppm Hf) to be suitable for use in nuclear reactors. However, Zr and Hf always occur together in nature, and due to very similar chemical and physical properties, their separation is particularly difficult. Separation can be achieved by traditional liquid–liquid extraction or extractive distillation processes, using Zr(Hf)Cl₄ as feedstock. However, the production of K₂Zr(Hf)F₆ via the plasma dissociation route, developed by the South African Nuclear Energy Corporation Limited (Necsa), could facilitate the development of an alternative separation process. In this theoretical study, the results of density‐functional theory (DFT) simulations of K₂Zr_(1‐z)Hf_zF₆ solid solutions [using Cambridge Serial Total Energy Package (CASTEP)] are presented, for which the supercell approach was applied in an attempt to determine whether solid solution formation during crystallization from aqueous solutions (fractional crystallization) is thermodynamically possible, which would hinder the separation efficiency of this method. Consequently, the calculated thermodynamic properties of mixing were used to evaluate the separation efficiency of Zr and Hf by fractional crystallization using a thermodynamic model to calculate the relative distribution coefficients. The small mixing enthalpies that were calculated from the DFT results, indicates that lattice substitution of Zr(IV) by Hf(IV) in K₂ZrF₆ could occur with relative ease. This is not surprising, considering the close similarities between Zr and Hf, and it was therefore concluded that K₂Zr_(1‐z)Hf_zF₆ solid solution formation might well restrict the separation efficiency of Zr and Hf by fractional crystallization of K₂Zr(Hf)F₆. © 2009 Wiley Periodicals, Inc. Int J Quantum Chem, 2011     

Chelatbildende Austauscherharze,VII

Preparation and use of a resin with 1.8-dihydroxynaphthalene-O,O-diacetic acid as chelating group are described. Besides the separation of many of the common interfering ions it also permits the separation of Hf. The following ions could be separated quantitatively: Mg(II), Pb(II), Cu(II), Fe(III), La(III), Ce(IV), Th(IV), Ti(IV), and U(VI). During these and further qualitative and quantitative experiments no interfering ions could be found. A method for the separation of⁹⁵Zr from its daughter nuclide⁹⁵Nb is also described. The main problem proved to be the separation of Zr(IV) and Hf(IV), owing to their close resemblance. To accomplish quantitative determination of Zr and Hf without any separation,⁹⁵Zr and^175+181Hf radioisotopes were used. The chelating resin permits the separation of 95% of Hf(IV) from an equimolar solution. The main part of Hf(IV) is eluated by 2M hydrochloric acid, and subsequently Zr(IV) by 0.75M oxalic acid. The rest of Hf is enriched in the first fractions of the oxalic acid eluate, so that when eliminating these, even after a single step experiment hafnium free from zirconium and a rather pure fraction of zirconium are obtained. Even under extreme conditions of concentration (Zr∶Hf=91∶1) 75% of Hf can be separated free from Zr in a single step experiment.

---

---

Vorgetragen auf der IUPAC-Tagung in Prag, 1967.     

Catalytic thermal and photo-induced CH and CC activation reactions of alkanes with ansa amido functionalized half-sandwich complexes and methylalumoxane

In the literature most of the dehydrogenation reactions of alkanes are described as CH activation reactions of cyclooctane. The best results of CH activation reactions have been found for the reaction of MAO activated metallocene complexes and cyclooctane at temperatures over 300 °C.The application of ansa amido functionalized half sandwich compounds of the type Ind′Si(Me)2NtBuMCl2 (Ind′= monosubstituted indenyl); M = Ti, Zr, Hf) for CH and CC activation reactions is completely unknown in the literature.In contrast to the dehydrogenation reactions of cyclooctane and the metallocene complexes of the group 4 metals, where the zirconocene complexes give higher TONs than the titanocene complexes the ansa amido functionalized titanium complexes give more than two times higher TONs than the corresponding Zr or Hf complexes. The ansa amido functionalized ligand increases the TONs for the Ti complexes and decreases the TONs of the Zr complexes.In contrast to the metallocene complexes, the ansa amido functionalized dichloride complexes of Ti show also a higher activity than the corresponding Zr complexes. It is known that the photolysis of organometallic titanium, zirconium and hafnium (IV) compounds can give M(III) radicals. The formation of the active Ti metal centre is easier than in the case of the corresponding Zr and Hf metal compounds.     

National intercomparison exercise, ZH-A for the measurement of hafnium and zirconium in zirconium ores

Summary A national intercomparison exercise was conducted to remove inconsistencies and improve analytical procedures in the measurement of hafnium and zirconium in zirconium ores. The ZH-A series of reference samples, prepared at the Pakistan Institute of Nuclear Science and Technology (PINSTECH), were used for this purpose. It was observed that measurement errors decreased with increasing Hf concentration (~298-17500 ppm) for most techniques, especially for AAS due to the sample preparation procedure required for this technique. Of all the tested techniques most reliable results were obtained with neutron activation analysis (NAA) for the measurement of Hf and Zr in such matrices.     

Extraction and separation of zirconium from hafnium by using nano-structured supramolecular solvent microextraction method

In the present study, a simple versatile extraction method based on supramolecular solvent microextraction followed by inductively coupled plasma atomic emission spectrometry was developed for the extraction, separation and determination of zirconium (Zr) from hafnium (Hf). Zr and Hf were complexed with bis(2,4,4-trimethylpentyl) phosphinic acid, to obtain hydrophobic complex, and extracted into supramolecular solvent phase. The effective parameters on the supramolecular solvent microextraction efficiency were studied and optimized by using two different optimization methods: one variable at a time and central composite design. Under the optimum conditions, the linear range of 0.3–200.0 and 2.0–200.0 µg L^?1, detection limits (S/N = 3) of 0.1 and 0.6 µg L^?1, and precisions (n = 5) of 3.2–4.9% and 3.0–5.1% were obtained for Zr and Hf, respectively. Finally, the proposed method has been successfully applied for the extraction and separation of these cations in zirconium ore sample.     

双(烷基环戊二烯基)二硫氰基钛、锆、铪的合成

文献报道了双(环戊二烯基)二硫氰基钛、锆、铪^[1-3]及双(甲基环戊二烯基)二硫氰基钛^[4]的合成。我们利用双(烷基环戊二烯基)二氯化钛、锆、铪与过量硫氰酸钾反应,合成了一系列新的双(烷基环戊二烯基)二硫氰基钛、锆、铪(见表1)。     

Chemistry of 2,2,6,6,-tetramethyl-3,5-heptanedione (Hthd) modification of zirconium and hafnium propoxide precursors

The modification of different zirconium propoxide and hafnium propoxide precursors with 2,2,6,6,-tetramethyl-3,5-heptanedione (Hthd) was investigated by characterization of the isolated modified species. The complexes [Zr(OnPr)3(thd)](2), [Zr(OnPr)(OiPr)2(thd)]2, Zr(OiPr)(thd)3, [Hf(OnPr)3(thd)]2, and Hf(OiPr)(thd)3 were isolated and characterized. The structure of the n-propoxide analogue of Zr(OiPr)(thd)3 could not be refined, but its existence was clearly demonstrated by XRD and 1H NMR. The modification of the propoxide precursors involves mono- and trisubstituted intermediate compounds and does not involve a disubstituted compound; thus, the commercial product that is claimed to be "Zr(OiPr)2(thd)2" and is most commonly used for the MOCVD preparation of ZrO2 does not exist. No evidence was found for the presence of such a compound in either zirconium- or hafnium-based systems. Formation of the dimeric hydroxo-di-thd-substituted complex, [Hf(OH)(OiPr)(thd)2]2, which could be isolated only for hafnium-based systems, occurs on microhydrolysis. All heteroleptic intermediates are eventually transformed to the thermodynamically stable Zr(thd)4 or Hf(thd)4) The compounds obtained from isopropoxide precursors showed a higher stability than those with n-propoxide ligands or a combination of both types. In addition, it is important to note that residual alcohol facilitates the transformation and strongly enhances its rate. The unusually low solubility and volatility of MIV(thd)4 has been shown to be due to close packing and strong van der Waals interactions in the crystal structures of these compounds.     

Cloud point extraction and simultaneous determination of zirconium and hafnium using ICP-OES

In the present study a simple versatile separation method using cloud point procedure for extraction of trace levels of zirconium and hafnium is proposed. The extraction of analytes from aqueous samples was performed in the presence of quinalizarine as chelating agent and Triton X-114 as a non-ionic surfactant. After phase separation, the surfactant-rich phase was diluted with 30% (v/v) propanol solution containing 1 mol l(-1) HNO3. Then, the enriched analytes in the surfactant-rich phase were determined by inductively coupled plasma-optical emission spectrometry (ICP-OES). The different variables affecting the complexation and extraction conditions were optimized. Under the optimum conditions (i.e. 3.4 x 10(-5) mol l(-1) quinalizarine, 0.1% (w/v) Triton X-114, 55 degrees C equilibrium temperature) the calibration graphs were linear in the range of 0.5-1000 mug l(-1) with detection limits (DLs) of 0.26 and 0.31 microg l(-1) for Zr and Hf, respectively. Under the presence of foreign ions no significant interference was observed. The precision (%RSD) for 8 replicate determinations at 200 microg l(-1) of Zr and Hf was better than 2.9% and the enrichment factors were obtained as 38.9 and 35.8 for Zr and Hf, respectively. Finally, the proposed method was successfully utilized for the determination of these cations in water and alloy samples.     

Addition and metathesis reactions of zirconium and hafnium imido complexes

The zirconium and hafnium imido metalloporphyrin complexes (TTP)M = NArtPr (TTP = meso-5,10,15,20-tetra-p-tolylporphyrinato dianion; M = Zr (1), Hf; AriPr = 2,6-diisopropylphenyl) were used to mediate addition reactions of carbonyl species and metathesis of nitroso compounds. The imido complexes react in a stepwise manner in the presence of 2 equiv of pinacolone to form the enediolate products (TTP)M[OC(tBu)CHC(tBu)(Me)O] (M = Zr (2), Hf (3)), with elimination of H2NAriPr. The bis(mu-oxo) complex [(TTP)ZrO]2 (4) is formed upon reaction of (TTP)Zr = NAriPr with PhNO. Treatment of compound 4 with water or treatment of compound 2 with acetone produced the (mu-oxo)bis(mu-hydroxo)-bridged dimer [(TTP)Zr]2(mu-O)(mu-OH)2 (5). Compounds 2, 4, and 5 were structurally characterized by single-crystal X-ray diffraction.     

Matrix isolation infrared spectroscopic and theoretical study of group IV metal oxide clusters: M2O2 and M2O4

Dinuclear titanium, zirconium, and hafnium oxide clusters, M2O2 and M2O4 (M = Ti, Zr, Hf) have been prepared and characterized by matrix isolation infrared spectroscopy and quantum chemical calculations. The M2O2 clusters were formed through the reactions of metal dimers and O2 in solid argon upon sample annealing. Theoretical calculations indicate that the Ti2O2 cluster has a singlet ground state with a nonplanar cyclic C(2v) structure with a strong Ti-Ti bond, while the Zr2O2 and Hf2O2 clusters have planar cyclic structures. The M2O4 clusters were characterized to have a closed-shell singlet ground state with a nonplanar C2h symmetry, which were formed from the dimerization of the metal dioxide molecules.