Kinetische und mechanistische untersuchungen von übergangsmetallkomplex-reaktionen : IX. Substitution von CO durch PPh3 in aminocarbinkomplexen: Präparative und kinetische untersuchungen

Pentacarbonyl(diethylaminocarbyne)chromium tetrafluoroborate, [(CO)₅₋ CrCNEt₂]BF₄ (I), reacts with PPh₃ with substitution of CO and formation of trans-tetracarbonyl(diethylaminocarbyne)triphenylphosphanechromium tetra-fluoroborate, trans-[PPh₃(CO)₄CrCNEt₂]BF₄ (III). Substitution of CO by PPh₃ in neutral trans-tetracarbonyl(halo)(diethylaminocarbyne)chromium complexes, trans-X(CO)₄CrCNEt₂ (IVa: X = Br, IVb: X = I), leads in a reversible reaction to the corresponding tricarbonyl complexes, mer-X(PPh₃)(CO)₃₋ CrNEt₂ (V), PPh₃ occupying the cis-position to the carbyne ligand. With PPh₃ in large excess both reactions follow a first-order rate law. This as well as the activation parameters (ΔH≠ = 104–113 kJ mol⁻¹, ΔS≠ = 64–71 J mol⁻¹ K⁻¹) indicate a dissociative mechanism.     

Synthesis and electrochemical behaviour of the cyanamide-isocyanide complexes of rhenium, trans-[ReL(CNR)(Ph2PCH2CH2PPh2)2] ( L = NCNH2 or NCNH)

Reaction of trans-[ReCl(CNR)(dppe)₂] (R = Me (Ia) or ^tBu (Ib); DPPE = Ph₂PCH₂CH₂PPh₂) in CH₂Cl₂ with cynamide in the presence of TlBF₄ forms the new cynamide-isocyanide complexes trans-[Re(CNR)(NCNH₂)(dppe)₂][BF₄] (R = Me (IIa) or ^tBu (IIb)), which upon treatment by ^tBuOK or Et₃N give trans-[Re(NCNH)(CNR)(dppe)₂] (R = Me (IIIa) or ^tBu (IIIb)). The electrochemical behaviour of these species was studied by cyclic voltammetry and controlled potential electrolysis at a Pt electrode in an aprotic solvent, and cathodic reduction of II results in the formation of III.     

Syntheses of low-valent nitrosyl complexes of rhenium and X-ray structure oftrans-[ReCl(NO)(Ph2PCH2CH2PPh2)2][NO3]2 with nitrosyl derived nitrates

The nitrosyl complexes trans-[ReCl(NO)(dppe)₂]A₂ (1; A = BF₄ or NO₃; dppe = Ph₂PCH₂CH₂₋PPh₂) and trans-[ReCl(NO)(dppe)₂][BF₄] (2) have been prepared from the reactions of NO[BF₄] or NO with trans-[ReCl(N₂)dppe)₂]. An unusual facile oxidation of NO to nitrate is involved in the formation of (1, A = NO₃), the X-ray structure of which is reported.     

Synthesis and reactivity towards tetrafluoroboric acid of a new family of heterobimetallic polyhydride complexes [(CO)(PPh3)2HRe(μ-H)3RhL2] (L = PPh3, 1,2,5-triphenylphosphole, or P(OMe)3)

The reaction of K[ReH₆(PPh₃)₂] with [RhCl(CO)L₂] [L= PPh₃, 1,2,5-triphenylphosphole (TPP), or P(OMe)₃] leads to the new electronically unsaturated heterobimetallic polyhydride complexes [(CO)(PPh₃)₂HRe(μ-H)₃RhL₂] in moderate-to-good yields. The structures of these complexes have been established on the basis of spectroscopic data, especially ¹H and ³¹P NMR. The bridging hydride ligands are fluxional but there is either a slow or nonexistent exchange between terminal and bridging hydrides. For L = PPh₃ or TPP, protonation with tetrafluoroboric acid affords quantitatively the cationic complexes [(CO)(PPh₃)₂HRe(μ-H)₃RhHL₂]⁺, isolated as the BF₄⁻ or the BPh₄⁻ salts.     

Zur Komplexierung von enantiomerenreinen cis- und trans-3-Diphenylphosphino-4-hydroxy-tetrahydrofuranen mit [Rh(COD)2]BF4

The complexation behaviour of cis- und trans-3-diphenylphosphino-4-hydroxyl-tetrahydrofurans with [Rh(COD)₂]BF₄ is studied with the help of NMR and IR spectroscopy. In dependence of the spatial arrangement of hydroxyl and phosphino group the formation of different intra- and intermolecular bridged O-P complexes has been observed.

Zusammenfassung

Das Komplexierungsverhalten von cis- und trans-3-Diphenylphosphino-4-hydroxy-tetrahydrofuranen mit [Rh(COD)₂]BF₄ wird mit Hilfe von NMR- und IR-Spektroskopie studiert. In Abhängigkeit von der räumlichen Anordnung von Hydroxy- und Phosphinogruppe zueinander wird die Bildung von intra- bzw. intermolekular verbrückten O-P-Komplexen beobachtet.     

Synthesis, characterisation and reactivity of trans-[Ru(L)(PPh3)Br2]; L=2-pyridyl-N-(2′-methylthiophenyl)methyleneimine: Crystal structure of trans-[Ru(L)(PPh3)Br2]

Reaction of Ru(PPh₃)₂Br₂ with the NNS chelating tridentate ligand 2-pyridyl-N-(2′-methylthiophenyl)methyleneimine (L) led to the isolation of the ruthenium(II) complex [Ru(L)(PPh₃)Br₂]. Reactivity of this complex with different bidentate chelating ligands revealed that the products are quite different from those obtained by reacting Ru(L)(PPh₃)Cl₂ (the corresponding cis dichloro complex) with the same ligands under comparable conditions. The mixed chelates were isolated and characterised by elemental analysis, magnetic moment measurement and by different spectroscopic methods along with their precursor. Electrochemistry of the complexes was examined by cyclic voltammetry using a platinum working electrode and a Ag/AgCl electrode as reference. The crystal structure of [Ru(L)(PPh₃)Br₂] disclosed that, unlike Ru(L)(PPh₃)Cl₂, the two bromo ligands are in trans position and this explained the difference in its reactivity pattern from the corresponding chloro complex.     

Synthesis and characterization of cationic heteronuclear complexes of platinum(II) and silver( I) bridged by alkynyl ligands

The dialkynyl complexes cis-[Pt(C CR)₂L₂] [R = Ph, L₂ = 2PPh₃, 2PEt₃, dppe (dppe = 1,2-bis(diphenylphosphino)ethane]; R ---^tBu, L₂ = 2PPh₃, dppe) react with silver perchlorate in a molar ratio 1:0.5 to give platinum-silver perchlorate salts of the type [Pt₂ Ag(C CR)₄L₄](ClO₄) in excellent yield. The X-ray crystal structure of [Pt₂Ag(C = CPh)₄(PPh₃)₄](ClO₄) 1 shows that the cation is formed by two nearly orthogonal cis-[Pt(C CPh)₂(PPh₃)₂] units connected through a silver cation which is unsymmetrically π-bonded to all four acetylene fragments. Similar reactions of cis-[Pt(C CR)₂L₂] with one equivalent of AgClO₄ afford cationic complexes of general formula [PtAg(C CR)₂L₂](ClO₄), which are believed to be salts, [Pt₂Ag₂(C CR)₄L₄](ClO₄)₂.     

P and C NMR investigation of the system tetracarbonyldi-μ-chlorodirhodium(I) — tertiary phosphine

¹³C and ³¹P{¹H} NMR data at low temperature prompted us to characterize cis-[Rh(CO)₂(PR₃)Cl] (3) (3a, PR₃ = PPh₃; 3b, PR₃ = PMe₂Ph), as surprisingly stable products of the reaction between [{Rh(CO)₂(μ-Cl)}₂] (1) and tertiary phosphines in toluene (P : Rh = 1). Every attempt to isolate solid 3a led to the cis- and trans- halide-bridged dimers [{Rh(CO)₂(μ-Cl)}₂] (5a) and 6a which are formed from 3a by slow decarbonylation, a process which is greatly accelerated by the evaporation of the solvent under vacuum.

The analogous reaction of 1 with dimethylphenylphosphine follows a similar pathway; in this case, however, low temperature NMR spectra allowed us to characterize the pentacoordinated dinuclear species [{Rh(CO)₂(μ-Cl)}₂] (2b) as the unstable intermediate of the bridge-splitting process.

The reaction of 3 with a second equivalent of phosphine (P : Rh = 2) leads, at room temperature, to the well known product trans-[Rh(CO)(PR₃)₂Cl] (8) accompanied by evolution of CO; however our data show that when the reaction is performed at 200 K, decarbonylation is prevented and spectroscopic evidence of trigonal bipyramidal pentacoordinate [Rh(CO)₂(PR₃)₂Cl] (7), stable only at low temperature, can be obtained.     

Syntheses, X-ray structures, and reactions of ruthenium carbonyl complexes containing 1,1-dithiolates

Treatment of [Ru₂(CO)₄(MeCN)₆][BF₄]₂ or [Ru₂(CO)₄(μ-O₂CMe)₂(MeCN)₂] with uni-negative 1,1-dithiolate anions via potassium dimethyldithiocarbamate, sodium diethyldithiocarbamate, potassium tert-butylthioxanthate, and ammonium O,O′-diethylthiophosphate gives both monomeric and dimeric products of cis-[Ru(CO)₂(η²-(SS))₂] ((SS)⁻=Me₂NCS₂⁻ (1), Et₂NCS₂⁻ (2), ^tBuSCS₂⁻ (3), (EtO)₂PS₂⁻ (4)) and [Ru(CO)(η²-(Me₂NCS₂))(μ,η²-Me₂NCS₂)]₂ (5). The lightly stabilized MeCN ligands of [Ru₂(CO)₄(MeCN)₆][BF₄]₂ are replaced more readily than the bound acetate ligands of [Ru₂(CO)₄(μ-O₂CMe)₂(MeCN)₂] by thiolates to produce cis-[Ru(CO)₂(η²-(SS))₂] with less selectivity. Structures 1 and 5 were determined by X-ray crystallography. Although the two chelating dithiolates are cis to each other in 1, the dithiolates are trans to each other in each of the {Ru(CO)(η²-Me₂NCS₂)₂} fragment of 5. The dimeric product 5 can be prepared alternatively from the decarbonylation reaction of 1 with a suitable amount of Me₃NO in MeCN. However, the dimer [Ru(CO)(η²-Et₂NCS₂)(μ,η²-Et₂NCS₂)]₂ (6), prepared from the reaction of 2 with Me₃NO, has a structure different from 5. The spectral data of 6 probably indicate that the two chelating dithiolates are cis to each other in one {Ru(CO)(η²-Et₂NCS₂)₂}fragment but trans in the other. Both 5 and 6 react readily at ambient temperature with benzyl isocyanide to yield cis-[Ru(CO)(CNCH₂Ph)(η²-(SS))₂] ((SS)=Me₂NCS₂⁻ (7) and Et₂NCS₂⁻ (8)). A dimerization pathway for cis-[Ru(CO)₂(η²-(SS))₂] via decabonylation and isomerization is proposed.     

Synthesis and structure of neutral and cationic pentahaloarylpalladium(II) isonitrile complexes

Complexes of the types (a) trans- and cis-[Pd(C₆X₅)₂ (CNR)₂], (b) trans- [Pd(C₆X₅)Cl(CNR)₂] and (c) [Pd(C₆X₅)(CNR)₃]ClO₄ (X = F or Cl;R = Bu^t cyclohexyl or p-tolyl) have been made by replacement of the tetrahydrothiophen or Cl groups of appropriate precursors by isonitrile. Their structures have been assigned on the basis of their IR and ¹H NMR spectra.     

Binuclear methyplatinum and phenylplatinum complexes with bis(dimethylphosphino)methane ligands

Reaction of cis-[Ptph₂(SMe₂)₂] with Me₂PCH₂PMe₂ (dmpm) gave cis-[PtPh₂(dmpm-P)₂] (1) or cis,cis-[Pt₂Ph₄(μ-dmpm)₂] (2) and reaction of 1 with [Pt₂Me₄(μ-SMe₂)₂] gave cis,cis-[Ph₂Pt(μ-dmpm)₂PtMe₂] (3). Reaction of 1 with trans-[PtClR(SMe₂)₂] gave cis,trans-[Ph₂Pt(μ-dmpm)₂PtClR], R = Me (5) or Ph (6), and in polar solvents, these isomerized to give [Ph₂Pt(μ-dmpm)₂PtR]⁺Cl⁻. When R = Me, further isomerization via the phenyl group transfer gave [PhMePt(μ-dmpm)₂PtPh]⁺Cl⁻. Oxidative addition of methyl iodide occurred reversibly at the cis-[PtMe₂P₂ unit of 3 to give cis,fac-[Ph₂Pt(μ-dmpm)₂PtIMe₃] but complex 2 failed to react with MeI. A comparison with similar known complexes of Ph₂PCH₂PPh₂ (dppm) is made and differences are attributed primarily to the lower steric hindrance of dmpm.     

Reactivity of ruthenium complexes with uninegative (X,S)-donor ligands (X = S,P)—II. Phosphine substitution in [Ru(S,S)2(PR3)2] derivatives. Crystal structure of trans-bis(O-ethyldithiocarbonate)bis(dimethylphenylphosphine)-ruthenium(II)

The complexes [Ru(S,S)₂(PPh₃)₂] [S,S = EtCOCS₂⁻, (CH₂)₄NCS₂⁻] react with a variety of tertiary phosphines with the substitution of triphenylphosphine and the formation of [Ru(S,S)₂(PR₃)₂]. The reaction occurs with the formation ofthe cis isomer, except for the complex with PMe₂Ph that gives rise to the trans isomer as the crystal structure shows. The effect of the different phosphines on the ruthenium complex is analysed in terms of the spectroscopic and electrochemical properties of the isolated compounds. The cyclic voltammetric studies of the cis complexes show that isomerization to the trans isomer occurs on oxidation. This isomerization is not observed in the trans-[Ru(S,S)₂(PMe₂Ph)₂] complexes that give rise to stable trans-ruthenium(II)/ruthenium(III) couples. In a similar way the diphosphine complexes afford a quasi-reversible cis-ruthenium(II)/ruthenium(III) process.     

Preparation and X-ray crystal structures of mixed ligand complexes containing the S3N ligand

Reaction of Hg(S₇N)₂ with cis- PtCl₂(PR₃)₂ (PR₃ = PPh₃, PPh₂Me, PPHMe₂, PEt₃) in the presence of Na[PF₆] gives [Pt(S₃N)(PR₃)₂][PF₆] in 32–46% yield. The complexes have been characterized by IR, NMR and microanalyses. The X-ray crystal structures of two examples (PR₃ = PPh₂Me and PEt₃) show that the S₃N⁻ ligand coordinates in a bidentate fashion via two sulphur atoms.     

Synthesis, structure and hydrogenation catalytic activity of [Ru3(μ3,η-ampy)(μ,η:η-PhC=CHPh)(CO)6(PPh3) (Hampy = 2-amino-6-methylpyridine)

The compound [RU₃(μ₃,η²- -ampy)(μ₃η¹:η²-PhC=CHPh)(CO)₆(PPh₃)₂] (1) (ampy = 2-amino-6-methylpyridinate) has been prepared by reaction of [RU₃(η-H)(μ₃,η²- ampy) (μ,η¹:η²-PhC=CHPh)(CO)₇(PPh₃)] with triphenylphosphine at room temperature. However, the reaction of [RU₃(μ-H)(μ₃, η² -ampy)(CO)₇(PPh₃)₂] with diphenylacetylene requires a higher temperature (110°C) and does not give complex 1 but the phenyl derivative [RU₃(μ₃,η²-ampy)(μ,η ¹:η² -PhC=CHPh)(μ,-PPh₂)(Ph)(CO)₅(PPh₃)] (2). The thermolysis of complex 1 (110°C) also gives complex 2 quantitatively. Both 1 and 2 have been characterized by0 X-ray diffraction methods. Complex 1 is a catalyst precursor for the homogeneous hydrogenation of diphenylacetylene to a mixture of cis- and trans -stilbene under mild conditions (80°C, 1 atm. of H₂), although progressive deactivation of the catalytic species is observed. The dihydride [RU₃(μ-H)₂(μ ₃,η²-ampy)(μ,η¹:η²- PhC=CHPh)(CO)₅(PPh₃)₂] (3), which has been characterized spectroscopically, is an intermediate in the catalytic hydrogenation reaction.     

Success and serendipity during studies aimed at preparing carbenerhodium(I) complexes

The preparation of a series of new square-planar and half-sandwich type carbenerhodium(I) complexes will be described. The key to success is the use of the bis(stibane)rhodium compound trans-[RhCl(C₂H₄)(SbiPr₃)₂] as starting material from which in a stepwise manner the complexes trans-[RhCl(=CRR′)(SbiPr₃)₂] (L = PiPr₃, AsiPr₃, SbEt₃) and [C₅H₅Rh(=CCR′)L] (L = SbiPr₃, PiPr₃, PMe₃, CO, CNtBu) have been obtained. Displacement of the carbene ligand in either trans-[RhCl(=CPH₂)L₂]L = SbiPr₃, PiPr₃ or [C₅H₅Rh(=CPh₂)(PiPr₃)] by CO or CNtBu leads to the formation of the corresponding carbonyl- or isocyanidrhodium compounds and the C---C coupling products Ph₂C=C=O and Ph₂C=C=NtBu, respectively. The carbene ligand is also involved in the selective formation of the isomeric olefins CH₂=CHCPh₂H and Ph₂C=CHCH₃ on treatment of trans-[RhCl(=CPh₂)(SbiPr₃)₂] and trans-[RhCl(=CPh₂)(PiPr₃)₂] with ethene. The most spectacular reaction of the bis(triisopropylstibane) complexes, however, occurs on warming of trans-[RhCl(=CRR′)(SbiPr₃)₂] in the absence of any substrate which yields the first representatives of dinuclear transition-metal compounds containing a tertiary stibane ligand in a bridging position. Some exploratory studies on the reactivity of the Rh₂(μ-SbiPr₃) complexes indicate that the triisopropylstibane can be replaced by SbMe₃, SbEt₃ or CNtBu without destroying the dimetallic core of the molecule.     

Synthesis, characterization and the unpleasantly disordered crystal structure of Ir(Ome)(CO)(PPh3)2(SO4)

The adducts of O₂ and SO₂ with trans-MeOIr(CO)(PPh₃)₂ are formed in equilibria and have been characterized. Reaction of the SO₂ adduct, Ir(OMe)(SO₂)(CO)(PPh₃)₂ with dioxygen leads to the sulfato complex, Ir(Ome)(CO)(PPh₃)₂(SO₄), the structure of which has been determined. Ir(Ome)(CO)(PPh₃)₂(SO₄) crystallizes in the monoclinic system with a 11.958(2), b 14.163(3), c 12.231(2) Å, β 118.365(12)°, V 1822.7(6) ų and Z = 2. Diffraction data for 2θ = 4.5–45.0° (Mo-K) were collected with a Syntex P2₁ diffractometer and the structure was solved (assuming space group P2₁/m and an unpleasant 2-fold disordered model) and refined to R = 4.8% for all 2512 independent data (R = 3.5% for those 2042 data with ¦F_O¦ > 6σ(¦F¦)). The iridium(III) atom has a distorted octahedral coordination sphere with trans PPh₃ ligands and a cis-chelating bidentate O,O′-SO₄ group; the structure is completed by mutually cis OMe and CO ligands.     

Attempts at stepwise reduction of the carbon-nitrogen triple bond of a nitrile at two metal centres: study of the reactivity of [(CO)(PPh3)2Re( (μ-NCHPh)Ru(PPh3) 2(PhCN)] towards tetrafluoroboric acid and dihydrogen

The reaction of [(CO)PPh₃)₂Re(μ-H)₂(μ-NCHPh)Ru(PPh₃)₂(PhCN)] (2) with HBF₄-Me₂O generates [(CO)PPh₃)₂Re(μ- H)₂(μ,η¹,η²HNCHPh)Ru(PPh₃)₂(PhCN)][BF₄] (3). Monitoring the reaction by NMR spectroscopy shows the intermediate formation of [(CO)(PPh₃)₂ HRe(μ-H)₂(μ-NCHPh)Ru(PPh₃)₂(PhCN)][BF₄] (4). Attempted reduction of the imine ligand by a nucleophile (H⁻ or CN⁻) failed, regenerating 2. Under dihydrogen at 50 atm, 3 is slowly transformed into [(CO)(PPh₃)₂HRe(μ-H)₃Ru(PPh₃)₂(PhCN)][BF₄] (5) with liberation of benzyl amine.     

Template reactions with polynuclear complexes. The reaction of [Mo2(O2CCF3)4(PR3)2] (R = Ph, Et) with 2-aminobenzaldehyde

The binuclear molybdenum(II) complexes [Mo₂(O₂CCF₃)₄(PR₃)₂] (R = Ph, Et) act as templates for the self-condensation of 2-aminobenzaldehyde to give a new class of complexes in which a hydride ion bridges two molybdenum(III) centres, each of which carries a tetradentate macrocyclic ligand (C). The new hydrido complexes [Mo₂(C)₂ (H)(O₂CCF₃)₃(PPh₃)₂] (I), [Mo₂(C)₂(H)₂(O₂CCF₃)₂(PPh₃)₂] (II), and [Mo₂(C)₂ (H)₂(O₂CCF₃)₂(PEt₃)₂]₂ (V) exist in two or more isomeric forms as shown by their IR, ¹H, ³¹P and ¹⁹F NMR spectra. Substitution with thiocyanate, nitrate and tetraphenylborate anions gives the new products [Mo₂(C)₂(H)(CO)(NCS)₃(PPh₃)₂] (III), [Mo₂(C)₂ (H)₂(O₂CCF₃)(NO₃)(PPh₃)₂] (IV), [Mo₂(C)₂(H)(O₂CCF₃)(PPh₃)₂](BPh₄)₂ (VI) and [Mo₂(C)₂(H)₂(O₂CCF₃)(PEt₃)₂](BPh₄) (VII), which also exist in isomeric forms.     

Equilibrium constants and kinetics of carbon monoxide insertion in alkyl complexes of ruthenium(II)

The equilibrium constants of the reaction of cis, trans-[Ru(CO)₂(PMe₃)₂(CH₃)I] (Mc) with carbon monoxide to give cis, trans[Ru(CO)₂(PMe₃)₂ (COMe)i] (Ac) and trans, trans[Ru(CO)₂(PMe₃)₂(COMe)I] (At) were measured at various temperatures in toluene. The thermodynamic parameters are compared with those obtained for the isoelectronic complexes of iron, and the trend is discussed. The kinetics of the carbonylation reaction of Mc, as well as those of the inverse decarbonylation reaction of At were measured. The kinetics of the carbonylation of the new complex trans, trans-[Ru(CO)₂(PMe₃)₂(CH₃)I] (Mt) were also investigated. All the results afford further support to the previously proposed CO insertion mechanism occurring via methyl migration. The comparison of these kinetic results with those of isoelectronic complexes of iron indicates that ruthenium is more reactive than iron, which is reflected by its greater aptitude to act as catalyst in many processes.     

Synthesis and characterization of hydroxo, pyrazolato and carboxylato derivatives of the PdR(PPh3)moiety (R = C6F5 or C6Cl5)

The hydroxo-complexes [{PdR(PPh₃)(μ-OH)}₂] (R = C₆F₅ or C₆Cl₅) have been obtained by reaction of the corresponding [{PdR(PPh₃)(μ-Cl)}2] complexes with NBu₄OH in acetone. In this solvent, the reaction of the hydroxo-bridged complexes with pyrazole (Hpz) and 3,5-dimethylpyrazole (Hdmpz) in 1:2 molar ratio leads to the formation of the new complexes [{Pd(C₅F₅)(PPh₃)(μ-azolate)}2] and [{Pd(C₆Cl₅)(PPh₃)}₂(μ-OH)(μ-azolate)] (azolate = pz or dmpz). The reaction of the bis(μ-hydroxo) complexes with Hpz and Hdmpz in acetone in 1:1 molar ratio has also been studied, and the resulting product depends on the organic radical (C₆F₅ or C₆Cl₅) as well as the azolate (pz or dmpz). The identity of the isomer obtained has been established in every case by NMR (¹H, ¹⁹F and ³¹P) spectroscopy. The reaction of the bis(μ-hydroxo) complexes with oxalic (H₂Ox) and acetic (HOAc) acids yields the binucle ar complexes [{PdR(PPh₃)}2(μ-Ox)] (R = C₆F₅ or C₆Cl₅) and [{Pd(C₆F₅)(PPh₃)(μ-OAc)}2], respectively. [{Pd(C₆F₅)(PPh₃)(μ-OH)}₂] reacts with PPh₃ in acetone in 1:2 ratio giving the mononuclear complex trans-[Pd(C₆F₅) (OH)(PPh₃)₂], whereas the pentachlorophenylhydroxo complex does not react with PPh₃, even under forcing conditions.