Kamlet–Taft's Solvatochromic Parameters for Nonaqueous Binary Mixtures between n-Hexane and 2-Propanol, Tetrahydrofurane, and Ethyl Acetate

The π*, α, and β Kamlet–Taft solvatochromic solvent parameters have been determined for nonaqueous binary mixtures commonly used in normal-phase liquid chromatography (NPLC), such as ethyl acetate n-hexane, tetrahydrofurane n-hexane, and 2-propanol n-hexane from spectroscopic data by using several UV-visible absorbing probes. Because preferential solvation is almost nonexistent for the π* probes in the different binary mixtures, we conclude that the measured values reflect quite well the dipolarity–polarizability of the bulk solution. However, strong preferential solvation for the different α and β probes in all mixtures studied here shows that the solvent parameters obtained reflect the properties of the solvation shell more than the bulk properties. This observation does not necessarily mean that the α and β values obtained will not be useful in multiple linear regressions (MLR), but results should be interpreted with care and will depend on the particular situation. Actually, results will make sense only if the particular solute under study preferentially solvates in a fashion similar to that of the α and β solvatochromic probes.     

Enthalpies of 1,4-Dioxane, 1,2-Dimethoxyethane, and Ethylacetate Solvation in the Water–1-Propanol and Water–Glycerol Binary Mixtures

The enthalpies of 1,4-dioxane, 1,2-dimethoxyethane, and ethylacetate solution in binarymixtures of water with 1-propanol and glycerol were measured at 25°C using a precise isoperibol calorimeter. The enthalpies of the solute solvation were calculated and compared with the experimental data for other solutes. The results obtained were interpreted in terms of universal and specific solute solvation using parameters of a solvent polarity. It was found that the extreme shape of the curve _solv H° vs. X for ethylacetate in the mixtures of water with 1-propanol results from peculiarities of carbotylate-group solvation and appears to be not connected with the influence of alcohol microaggregates in the mixed solvent.     

Transfer Hydrogenation of Nitriles with 2-Propanol and Raney® Nickel

Abstract

Raney nickel in refluxing 2-propanol containing 2% KOH is an effective catalytic system for reducing nitriles to amines.     

Isopiestic Determination of Osmotic and Activity Coefficients for Solutions of LiCl, LiBr, and LiNO3 in 2-Propanol at 25°C

The osmotic coefficients of lithium chloride, lithium bromide, and lithium nitrate in 2-propanol have been measured by the isopiestic method at 25^°C. Sodium iodide was used as the isopiestic standard. The molality ranges covered were from 0.2 to 1.5 for LiCl and LiBr, and to 1.9 mol-kg^-1 for LiNO₃. The system of equations developed by Clegg–Pitzer and Pitzer were used to fit each set of osmotic coefficients. The experimental osmotic coefficient data are successfully correlated with these models. The parameters from the fit were used to calculate the mean molal activity coefficients.     

Solubility and Solution Thermodynamics of Some Sulfonamides in 1-Propanol + Water Mixtures

The solubilities of sulfadiazine (SD), sulfamerazine (SMR) and sulfamethazine (SMT) in some 1-propanol + water co-solvent mixtures were measured at five temperatures from 293.15 to 313.15 K over the polarity range provided by the aqueous solvent mixtures. The mole fraction solubility of all these sulfonamides was maximal in the 0.80 mass fraction of 1-propanol solvent mixture (δ _solv = 28.3 MPa^1/2) and minimal in water (δ = 47.8 MPa^1/2) at all temperatures studied. The apparent thermodynamic functions Gibbs energy, enthalpy, and entropy of solution were obtained from these solubility data by using the van’t Hoff and Gibbs equations. Apparent thermodynamic quantities of mixing were also calculated by using the ideal solubilities reported in the literature. Nonlinear enthalpy–entropy relationships were observed for these drugs in the plots of enthalpy versus Gibbs energy of mixing. The plot of ?_mix H° versus ?_mix G° shows different trends according to the slopes obtained when the mixture compositions change. Accordingly, the mechanism for the solution process of SD and SMT in water-rich mixtures is enthalpy driven, whereas it is entropy driven for SMR. In a different way, in 1-propanol-rich mixtures the mechanism is enthalpy driven for SD and SMR and entropy driven for SMT. Ultimately, in almost all of the intermediate compositions, the mechanism is enthalpy driven. Nevertheless, the molecular events involved in the solution processes remain unclear.     

Density, Viscosity and Refraction Index of Aqueous Solutions of 7-Hydroxycoumarin and Ethanol or 1-Propanol at Temperatures from 293.15 to 313.15 K

7-Hydroxycoumarin exhibits antioxidative, lipoxygenase inhibitive and anti-tumourigenic effects. Density and viscosity measurements have been carried out for the solutions of 7-hydroxycoumarin in mixture solvents of water and ethanol or 1-propanol at T = (293.15, 298.15, 303.15, 308.15 and 313.15) K. The measured data have been used to evaluate apparent molar volumes (V _? ), limiting apparent molar volumes ( $ V_{\phi }^{0} $ ), viscosity B-coefficients of the Jones–Dole equation and variation of B with temperature (dB/dT). The values of $ V_{\phi }^{0} $ and B-coefficients are positive and pass through their corresponding maxima at about 18 mol·kg^?1 ethanol molality and 20 mol·kg^?1 1-propanol molality, respectively. Besides, the values of $ V_{\phi }^{0} $ and B-coefficients decrease with increasing temperature. Molar refractive indices (R _D) of the ternary solutions at the temperature of 298.15 K have also been determined from measured refractive indices (n _D). There is an obvious increase of R _D with increasing molality of the solvent. These parameters have been interpreted in terms of solute–solvent interactions and structure making/breaking ability of components in the aqueous solution. The temperature and concentration dependences of the weak interactions in the solution systems have also been discussed.     

Ultrasonic Velocities,Densities, and Refractive Indices of Binary Mixtures of Polyethylene Glycol 250 Dimethyl Ether with 1-Propanol and with 1-Butanol

Measurements of the ultrasonic velocity (u), density (ρ) and refractive index (n) for binary mixtures of polyethylene glycol 250 dimethyl ether with 1-propanol and 1-butanol have been made at three temperatures (T=293, 303 and 31 K) over the entire composition range in order to investigate the nature of intermolecular interactions between the components of these liquid mixtures. Various excess thermodynamic properties such as the excess ultrasonic velocity (Δu), deviation in isentropic compressibility (Δk _S ), excess intermolecular free length (L_f^E)(L_{\mathrm{f}}^{\mathrm{E}}), excess acoustic impedance (Z ^E), excess pseudo-Grüneisen parameter (Γ ^E), and molar refraction deviation (ΔR _m) were calculated using experimental values of the ultrasonic velocity, density and refractive index and were then represented with the Redlich-Kister polynomial equation. The observed excess deviation parameter values were explained on the basis of the strength of intermolecular interactions between the components of the mixtures. Estimations of the refractive index and ultrasonic velocity have also been made using various empirical relations and are discussed in terms of the average percentage deviations (APD).     

Density and Viscosity for Binary Mixtures of the Ionic Liquid 1-Butyl-3-methylimidazolium Tetrafluoroborate with 2-Propanol,N,N-Dimethylacetamide and N,N-Dimethylformamide at 293.15–323.15 K: Experimental and PC-SAFT Modeling

Journal of Solution Chemistry - For three binary mixtures composed of ionic liquid 1-butyl-3-methylimidazolium tetrafluoroborate ([Bmim][BF4]) with 2-propanol, N,N?dimethylacetamide (DMA) and...     

Pitzer and Pitzer–Simonson–Clegg Modeling Approaches: Ternary HCl + 2-Propanol + Water Electrolyte System

Despite its success for modeling electrolyte thermodynamics in aqueous media, the use of the Pitzer approach for the investigation of electrolytes in nonaqueous or in mixed solvent media is still very limited. Further, a review of the literature reveals that there are no more than a few research groups who have used the exact form of the Pitzer–Simonson–Clegg (PSC) ion-interaction approach for the investigation of electrolytes in mixed solvent systems. As a continuation of our previous studies, the present investigation reports modeling of HCl in the 2-propanol + water mixed solvent system with the Pitzer, PSC and an extended form of the PSC ion-interaction approaches using the experimental potentiometric data from a cell containing pH glass membrane and Ag/AgCl electrodes. The electrochemical measurements were performed over the HCl molality range from 0.01 to 4.5 mol⋅kg⁻¹ in mixed 2-propanol (x%)+water (100−x%) solvents, with different solvent percent mass fractions (x%=10,20,30,40 and 50%) at 298.15±0.05 K.     

Liquid–Liquid Equilibrium of Water + 1-Propanol or 1-Butanol + Dibutyl Ether Ternary Systems: Measurements and Correlation at Three Temperatures

Liquid–liquid equilibrium (LLE) date for the ternary systems of {water?+?1-propanol?+?dibutyl ether (DBE)} and (water?+?1-butanol?+?DBE) were determined at T?=?(293.15, 303.15, 308.15) K under atmospheric pressure. Distribution coefficients and separation factors of 1-propanol in the mixtures were calculated and are discussed. The influence of temperature on the liquid phase regions was analyzed. In addition, the experimental values were correlated well with the modified and extended UNIQUAC models; the modified UNIQUAC model represents the data better than the extended UNIQUAC model.     

Anabolic, doping, and lifestyle drugs, and selected metabolites in wastewater—detection, quantification, and behaviour monitored by high-resolution MS and MS n before and after sewage treatment

Municipal wastewater has been examined for steroids, β₂-agonists, stimulants, diuretics, and phosphodiesterase type V inhibitors (PDE type V inhibitors), which are “dual-use-drugs” applied either as anabolic, doping, and lifestyle drugs or for treatment of diverse diseases. To identify their origin, fitness centre discharges under suspicion of being point sources and sewage-treatment plant feed and effluents were sampled and concentrations determined. Sensitive and selective methods for determination and quantification based on solid-phase extraction (SPE) followed by high-performance liquid chromatography–high resolution mass and tandem mass spectrometry (HPLC–(HR)MS and HPLC–MS–MS) were developed and established for analysis of these compounds in wastewater and to assess their effect on the environment. The methods developed enabled quantification at trace concentrations (limit of quantification (LOQ): 5 ng L⁻¹). Of the steroids and stimulants under investigation, testosterone, methyltestosterone, and boldenone or ephedrine, amphetamine, and MDMA (3,4-methylendioxy-N-methylamphetamine) were observed at up to 5 μg L⁻¹ (ephedrine). Of the β₂-agonists salbutamol only, and of the diuretics furosemide and hydrochlorothiazide were confirmed in the extracts. Quite high concentrations of the PDE type V inhibitors sildenafil, tadalafil, and vardenafil and their metabolites were confirmed in fitness centre discharges (sildenafil: 1,945 ng L⁻¹) whereas their concentrations in municipal wastewater did not exceed 35 ng L⁻¹. This study identified anabolic and doping drugs in wastewater for the first time. Results obtained from wastewater treatment plant effluents proved that these “dual-use-drugs”, with the exception of hydrochlorothiazide, were mostly eliminated.     

Tautomerism, Hammett σ, and QSAR

A consideration of equilibrium model-based equations suggests that tautomeric equilibria do not markedly affect observed potency if the tautomer bound represents at least 50% of the compound in solution. Tautomeric equilibria can enhance or attenuate the correlation of potency with Hammett σ. Additionally, tautomeric equilibria can lead to a correlation of potency with σ even in the absence of a correlation of binding with σ.     

Viscometric, Acoustical and Spectroscopic Investigation of β-Pinene with Benzene, Toluene, m-Xylene and Mesitylene at 303.15, 308.15 and 313.15 K and Atmospheric Pressure

The densities (ρ), viscosities (η), ultrasonic speeds (u) and spectroscopic data of binary mixtures of benzene, toluene, m-xylene and mesitylene with β-pinene as a common component, over the whole composition range of mole fraction of β-pinene including those of pure components, have been measured at 303.15, 308.15 and 313.15 K, except for the spectroscopic study where the temperature was maintained at 298.15 K. The experimental results deviation in viscosity, deviation in ultrasonic velocity, isentropic compressibility and deviation in isentropic compressibility are discussed in terms of molecular interactions between unlike molecules. The variation of these excess parameters indicates the presence of weak interactions between β-pinene and benzene, toluene, m-xylene and mesitylene molecules. Moreover, the viscosity data are discussed in terms of interaction parameters. The theoretical ultrasonic speed was computed using the Nomoto model, ideal mixing relation, Jacobson’s free length theory and compared with the experimentally measured values. The experimental values are also discussed in terms of FTIR spectroscopy.     

Thermal characterization and kinetic analysis of nesquehonite,hydromagnesite, and brucite,using TG–DTG and DSC techniques

Nesquehonite, hydromagnesite, and brucite are important precursors for the preparation of high-purity magnesia (MgO) using magnesium resources from salt lake as raw materials. In this paper, TG–DTG and DSC were used to investigate the thermal decomposition behaviors of the three precursors. Decomposition kinetic parameters at each stage were evaluated based on the TG data using the iso-conversional method. Decomposition mechanisms were determined using the master-plots method. The decomposition temperature range, heat absorption, and kinetic parameters of the three phases were then compared. The most probable mechanism of each stage from the perspective of crystal structure was found to be consistent with the calculation results from the master-plots method. Results led to the conclusion that nesquehonite is the most appropriate precursor for the preparation of high-purity MgO. Further studies on precursor selection and calcining condition selection for the preparation of MgO using bischofite will benefit from this research.     

Reactions of 3-carene, limonene, and α-pinene nitrosochlorides with imidazole, benzotriazole, and indole

The reactions of terpene nitrosochlorides derived from 3-carene, ??-pinene, and limonene, with simplest azaheterocycles (imidazole, benzotriazole, and indole) were studied. On the base of these transformations, preparative procedures to access chiral oximes bearing azaheterocyclic moieties in the ??-position to the oxime fragment, namely, ??-(1H-imidazol-1-yl)-, ??-(1H-benzo-[d][1,2,3]triazol-1-yl)-, and ??-(1H-indol-3-yl)-substituted terpenic oximes, were developed. Transformations of the studied monoterpene nitrosochlorides into ??-substituted oximes proceeded stereoselectively to give in the moderate yields (30?C60%) the only stereoisomer arising from the attack of the heterocyclic anion from the less hindered side of the intermediate nitroso olefin generated in situ from nitrosochloride.     

Coupled cluster,MP2, and DFT study of structures,stabilities, vibrations,and bonding properties of XXeOH (X = F,Cl, Br,and I)

The optimized geometries, molecular properties, and stabilities of new noble gas molecules, XXeOH (X = F, Cl, Br, and I), were studied using CCSD, MP2, CAM-B3LYP, and WB97XD methods and large basis sets. All XXeOH molecules showed equilibrium structures with Cs symmetry. The results also showed that some bonds in XXeOH could be presented as a typical ionic bond. An alteration in ion-pair character was observed for IXeOH, showing two OH ^? and IXe ⁺ parts, while in other molecules, they could be presented as XeOH ⁺ and X ^? . Two decomposition routes were proposed for these molecules that showed high exothermic reactions. However, despite their low thermodynamic stabilities, their decomposition rate constants were small and all molecules (except BrXeOH) had high kinetic stabilities, indicating the possibility for identification and characterization of these molecules. However, in addition to the calculation of their vibrational frequencies, NBO atomic charges, and hybridizations, the bonding properties of XXeOH molecules were studied by AIM calculations (to calculate electron densities, bond elipticities, and Laplacian of electron densities) and second-order intramolecular perturbation energies using NBO calculations. Moreover, the ease of formations and relative stabilities of XXeOH molecules were compared using heats of formations, Gibbs free energies of formations and isodesmic reactions. These calculations showed that the stability of XXeOH molecules was decreased from F to I.     

Synthesis and α-glucosidase inhibitory activity of chrysin,diosmetin, apigenin,and luteolin derivatives

Several derivatives have been synthesized from chrysin, diosmetin, apigenin, and luteolin, which were isolated from diverse natural plants. The α-glucosidase inhibitory activity of these compounds was evaluated. The glucosidase inhibitory activity of all derivatives （IC50 〈 24.396 μmol]L） was higher compared with that of the reference drug, acarbose （IC50=563.601 ±40.492μmol/L）, and 1- deoxynojirimycin （IC50 = 226.912± 12.573 μmol/L）. O3＇,O7-Hexyl diosmetin （IC50 = 2.406 ± 0.101μmol/L） was the most potent inhibitor identified. These compounds showed a higher inhibitory ability compared with their precursors except the luteolin derivatives. In general, the inhibitory activity of the synthetic derivatives was enhanced with long alkyl chains at positions 3＇, 4＇ and 7 of the flavonoid.     

Polarography��past, present, and future

Polarography was first developed as an automated method of voltage-controlled electrolysis with dropping mercury electrode. The spontaneously renewed pure electrode surface provided reproducible electrochemical results which enabled scientists to work out adequate theory and rich analytical applications. The original method was then instrumentally modified in various ways. Later, hanging mercury drop was added as an alternative indicator electrode??in this way, polarography turned formally into voltammetry with mercury drop electrodes. Beside, in potential-controlled electrolysis, the mercury drop electrodes have been also used in current-controlled electrolysis (chronopotentiometry)??there, it has provided new experimental effects. Polarography has thus gradually covered a wide field of electrolytic methods based on the use of mercury electrodes, in which it continues developing.     

γ- and UV-radiation-induced degradation of sphingomyelin,lysosphingomyelin, and related compounds

The experimental data on the formation of final products in the radiolysis of 2-aminoglycerol and lysosphingomyelin (sphingosine phosphocholine) and in the photolysis of N-(2-hydroxypropyl)hexanamide and sphingomyelin suggest the occurrence of the radiation-induced degradation of the above substances with C-C bond cleavage. It was hypothesized that this process occurs by the formation and subsequent degradation of the N-centered radicals of the substrates.     

Preparation, characterization, and catalysis of mecro-catalysts

Because catalysis by metals is a surface phenomenon, many technological catalysts contain small (typically nanometre-sired) supported metal particles with a large fraction of the atoms exposed. Many reactions, such as hydrocarbon hydrogenations, are structure-insensitive, proceeding at approximately the same rates on metal particles of various sizes provided that they are larger than 1 nm and show bulk-like metallic behavior. But the catalytic properties are not known when metal particles become so small that their sizes are indium clusters consisting of several indium atoms. Here the catalytic behavior of precisely defined clusters of just four and six indium atoms on solid supports is shown. It is found that the Ir4 and Ir6 clusters differ in catalytic activity both from each other and from metallic Ir particles.