A novel C3v-symmetric molecular clip with tris(diamide) recognition sites on trindane platform for H2PO4− recognition

To avoid the deprotonation events occurred in the receptor upon recognition of basic anions, a novel C_3v-symmetric anion receptor 2 with two amide groups appended in each arm was designed and synthesized by using the trindane tricarboxylic acid as tripodal molecular framework. The anion recognition ability by 2 was examined by ¹H NMR titration study in DMSO-d₆, which revealed that the addition of H₂PO₄^? guests caused substantial downfield shifts of the amide-NH protons peaks due to the formation of a host-guest complex in 1:1 binding stoichiometry with the estimated binding constant (K_a) of 244?M^?1. No noticeable binding of 2 was observed with other tested anions such as F^?, Cl^?, Br^?, I^?, NO₃^? and HSO₄^? under similar conditions.     

A Comparison Between Shaker and Bioreactor Performance Based on the Kinetic Parameters of Xanthan Gum Production

Xanthan gum production was studied using sugarcane broth as the raw material and batch fermentation by Xanthomonas campestris pv. campestris NRRL B-1459. The purpose of this study was to optimize the variables of sucrose, yeast extract, and ammonium nitrate concentrations and to determine the kinetic parameters of this bioreaction under optimized conditions. The effects of yeast extract and ammonium nitrate concentrations for a given sucrose concentration (12.1–37.8 g L^?1) were evaluated by central composite design to maximize the conversion efficiency. In a bioreactor, the maximum conversion efficiency was achieved using 27.0 g L^?1 sucrose, 2.7 g L^?1 yeast extract, and 0.9 g L^?1 NH₄NO₃. This point was assayed in a shaker and in a bioreactor to compare bioreaction parameters. These parameters were estimated by the unstructured kinetic model of Weiss and Ollis (Biotechnol Bioeng 22:859–873, 1980) to determinate the yields (Y _P/S), the maximum growth specific rate (μ _max), and the saturation cellular concentration (X*). The parameters of the model (μ _max, X*, m, λ, α, and β) were obtained by nonlinear regression. For production of xanthan gum in a shaker, the values of μ _max and Y _P/S obtained were 0.119 h^?1 and 0.34 g g^?1, respectively, while in a bioreactor, they were 0.411 h^?1 and 0.63 g g^?1, respectively.     

Pulse radiolysis studies of intermolecular charge transfers involving tryptophan and three-electron-bonded intermediates derived from methionine

The oxidation processes of the radiation-generated, three-electron-bonded intermediates AcMet₂ [S??S]⁺ and AcMet [S??Br] were investigated by pulse radiolysis via their reactions with tryptophan (TrpH). These intermediates were derived from N-acetyl-methionine amide (N-AcMetNH₂) and N-acetyl-methionine methyl ester (N-AcMetOMe). The bimolecular rate constant k of the reaction between each intermediate and l-tryptophan (TrpH) was measured. For N-AcMetNH₂, k for the reaction of AcMet₂ [S??S]⁺ with TrpH were 3.4?×?10⁸ and 2.2?×?10⁸?dm³?mol^?1?s^?1 at pH?=?1 and 4.5, respectively. For N-AcMetOMe, k for the reaction of AcMet₂ [S??S]⁺ with TrpH were 4.0?×?10⁸ and 2.8?×?10⁸?dm³?mol^?1?s^?1 at pH 1 and 4.5, respectively. The rate constants for the intermolecular transformation of Met [S??Br] into TrpH⁺ or Trp were also estimated. For N-AcMetNH₂, k for the reaction of AcMet₂ [S??Br] with TrpH were 2.6?×?10⁸ and 3.3?×?10⁸?dm³?mol^?1?s^?1 at pH 1 and 4.5, respectively. Related mechanisms were discussed.     

The heat of dehydration of halophilic bacteria as measured by differential scanning calorimetry (DSC)

The heat of dehydration of two species of halophilic bacteria and of red cell pellets was measured by DSC. The molar heat of dehydration of H. marismortui was found to be 50.4 kJ mole^?1 H₂O, whereas that of H. halobium was 46.2 kJ mole^?1 H₂O, and that of human red blood cell 40.6 kJ mole^?1 H₂O. The molar heat of dehydration of H. marismortui has been shown to be composed of three fractions; the second one has a molar heat of 58 kJ mole^?1 H₂O and the third one 108 kJ mole^?1 H₂O.     

The properties of the ion associates of benzophenone in DMF

The properties of the ion associates of benzophenone (BP) free radicals with Na⁺ and Li⁺ have been investigated polarographically in dimethylformamide. It was found that BP^? forms ion pairs with Na⁺ (K_ass=69 M^?1) and two types of associates with Li⁺: BP^?...Li⁺ (K_ass,1=330 M^?1) and BP^?...(Li⁺)₂(K_ass,2M^?2). The influence of temperature on the equilibria was also discussed. The ion associates with Li⁺ disappear in a disproportionation reaction; the mechanism and kinetics of that reaction were studied. It was found that the main contribution to the overall kinetics are made by the pairs (a) BP^?...Li⁺+BP^?...Li⁺, (b) BP^?+BP^?...(Li⁺)₂ (c) BP^?...Li⁺+BP^?...(Li⁺)₂.     

Thermal studies and spectral characterization of the chelate of bis-(η5-cyclopentadienyl titanium(IV) with salicylidene-4-methylaniline

A new chelate (η⁵-C₅H₅)₂Ti(SB)₂, whereSB=O, N donor Schiff base salicylidene-4-methylaniline, was synthesized. The course of thermal degradation of the chelate was studied by thermogravimetric (TG) and differential thermal analysis (DTA) under dynamic conditions of temperature. The order of the thermal decomposition reaction and energy of activation was calculated from TG curve while from DTA curve the change in enthalpy was calculated. Evaluation of the kinetic parameters was performed by Coats-Redfern as well as Piloyan-Novikova methods which gaven=1, ΔH=1.114 kJ·mol^?1, ΔE=27.01 kJ·mol^?1, ΔS=?340.12 kJ·mol^?1·K^?1 andn=1, ΔH=1.114 kJ·mol^?1, ΔE=20.01 kJ·mol^?1, ΔS=?342.60 kJ·mol^?1·K^?1, respectively. The chelate was also characterized on the basis of different spectral studies viz. conductance, molecular weight, IR, UV-visible and¹H NMR, which enabled to propose an octahedral structure to the chelate.     

Electrochemical Responses and Sensitivities of Films Based on Multi-Walled Carbon Nanotubes in Aqueous Solutions

Novel films consisting of multi-walled carbon nanotubes (MWCNTs) were fabricated by means of chemical vapor deposition with decomposition of either acetonitrile (ACN) or benzene (BZ) using ferrocene as catalyst. The electrochemical responses of MWCNT-based films towards the ferrocyanide/ferricyanide, [Fe(CN)₆]^3?/4? redox couple were probed by means of cyclic voltammetry and electrochemical impedance spectroscopy at 25.0?±?0.5?°C. Both MWCNT-based films exhibit Nernstian response towards [Fe(CN)₆]^3?/4? with some slight kinetic differences. Namely, heterogeneous electron transfer rate constants lying in ranges of 2.69?×?10^?2?C1.7?×?10^?3 and 9.0?×?10^?3?C2.6?×?10^?3?cm·s^?1 were obtained at v?=?0.05?V·s^?1 for MWCNT_ACN and MWCNT_BZ, respectively. The detection limit of MWCNT_ACN, estimated to be about 4.70?×?10^?7?mol·L^?1 at v?=?0.05?V·s^?1, tends to become slightly poorer with the increase of the scan rate, namely at v?=?0.10?V·s^?1 the detection limit of 1.70?×?10^?6?mol·L^?1 was determined. Slightly poorer response ability was exhibited by MWCNT_BZ; specifically the detection limits of 1.57?×?10^?6 and 4.35?×?10^?6?mol·L^?1 were determined at v?=?0.05 and v?=?0.10?V·s^?1, respectively. The sensitivities of MWCNT_ACN and MWCNT_BZ towards [Fe(CN)₆]^3?/4? were determined as 1.60?×?10^?7 and 1.51?×?10^?7?A·L·mol^?1·cm^?2, respectively. The excellent electrochemical performance of MWCNT_ACN is attributed to the presence of incorporated nitrogen in the nanotube??s structure.     

Kinetics of nucleophilic attack on coordinated organic moieties. XVIII. Nucleophilicity of anions towards the tricarbonyl-(η-benzene) manganese (I) cation.

Kinetic results for the addition of OH^? to [Mn(CO)₃(η-C₆H₆)]⁺ (I) in water (eq. 1, X  OH) obey the expression k_obs  k_OH[OH^?], and give a k_OH value of 290 mol^?1 dm³ s^?1 at 20.0°C and ionic strength of 0.25 mol dm^?3. The analogous reaction of NaCN with I in water fits the two-term expression k_obs = k_OH[OH^?] + k_CN[CN^?], and leads to a k_CN value of 0.8 mol^?1 dm³ s^?1 at 20.0°C and ionic strength of 0.25 mol dm^?3. Interestingly, the related reaction (eq. 1, X  N₃) is too rapid to follow by stopped-flow spectrophotometry, indicating the overall rate trend N₃^? » OH^? » CN^?. This unusual nucleophilicity order, unexpected on the basis of both basicity and polarizability, is similar to that previously observed for anion addition to free carbonium ions.     

Kinetische untersuchung der reversiblen dimerisierung von o-phenylendioxidimethylsilan

The reversible dimerisation of o-phenylenedioxydimethylsilane (2,2-dimethyl-1,3,2-benzodioxasilole) has been studied by ¹H NMR spectroscopy. The kinetics of this reaction can be described quantitatively by a bimolecular 10-ring formulation reaction and a monomolecular backreaction. The thermodynamic and kinetic parameters are: ΔH⁰ = ?43 kJ mol^?1; ΔS⁰ = ?112 J mol^?1 K^?1; ΔG⁰₂₉₈ = ?9.6 kJ mol^?1; ΔH³₂₉₈ = 57 kJ mol^?1; ΔS³₂₉₈ = ?129 J mol^?1 K^?1; ΔG³₂₉₈ = 96 kJ mol^?1; E_a = 60 kJ mol^?1; A = 3.17 × 10⁶ l mol^?1 s^?1. Remarkable is the low activation energy of formation of the ten-membered ring, considering that two SiO bonds have to be cleaved during the reaction. Transition states and possible structures of the ten-membered heterocycle are discussed.     

Oxygen electrodes in fused salts: Investigation and mechanistic remarks on the system (Ni)O2, H2O/OH− in the (Na,K)NO3 eutectic melt

A potentiometric investigation on the system (Ni)O₂, H₂O/OH^? was carried out within the temperature range 513?T?636 K in the (Na, K)NO₃ equimolar mixture containing OH^? ions in the concentration range 5×10^?6<[OH^?]<10^?1m and flushed with a mixture of O₂ and H₂O at variable partial pressures. The system has been found to behave reversibly in all hydroxide concentration and temperature intervals studied with respect to all the species involved in the over-all electrode reaction ½ O₂+H₂O+2e^?=2OH^? so that the following nernstian relationship could be written E=E_O2,H₂O/OH^?+RT/Fln{[O₂]^1/4[H₂O]^1/2/[OH^?]} This potentiometric behaviour was tentatively interpreted on the basis of mechanistic models involving, in some steps, solid nickel oxides formed on the electrode surface by contact with the melt. The actual formation and existence of these compounds on the electrode surface under the given experimental conditions was proved by a proper XPS investigation.     

The absorption spectrum of carbon monoxide in the CO(3Π r,a) state between 215 nm and 285 nm

Bye-beam excitation of a He/CO mixture the CO(³Π _r ,a) state was sufficiently populated to allow the measurement of the absorption spectrum. The (0, 0), (1, 1), (2, 2) and (0, 1) bands of thec ³Π←a ³Π system of CO have been observed and the molecular constantsT _e =92036.0 cm^?1 (for the band head), ω _e =2249.5 cm^?1, ω _e x _e =29.5 cm^?1 have been derived for CO(c). A new electronic state withT _e =91854.3 cm^?1, ω _e =848.4 cm^?1, ω _e x _e =9.8 cm^?1,B _e =1.351 cm^?1, and α _e =0.021 cm^?1 was identified to be a³Σ state. It seems to be very likely that this state is the CO (3pσ,³Σ,j) state discussed in the literature. The results indicate a perturbation of the υ=1 levels of the new state by the CO (c,υ=0) levels. Another strong perturbation is found in the υ=4 levels. The three CO(³Σ,b,υ′=0,1,2)←CO (a,υ″=0) bands were also investigated yielding for CO(b):T _e =83778 cm^?1, ω _e =2335 cm^?1, ω _e x _e =59 cm^?1 andB _e =1.86 cm^?1.     

The Structure and Properties of Phenol-2,4-disulfonic Acid Dihydrate

The crystal and molecular structure of phenol-2,4-disulfonic acid dihydrate was determined by X-ray structure analysis. All hydrogen positions in the crystal structure were found using difference Fourier syntheses. Oxonium cations and acid anions were linked in the crystal structure by short H-bonds, and the phenol OH group participated in two weak H-bonds with sulfo group oxygens simultaneously. The IR frequency corresponding to ν_{s, as} (H₃O⁺) vibrations decreased to 2700 cm^?1 under the influence of short H-bonds between oxonium cations and anions. The contour of the corresponding absorption band became anomalously broad. A discrete maximum was observed at 3412 cm^?1 on the high-frequency wing of this band; this maximum was assigned to OH stretching vibrations of the phenol group. The protonic conductivity of the compound measured by impedance spectroscopy was 2.5 × 10^?6 Ω^?1 cm^?1 at 298 K in a vacuum, E _a = 0.37 ± 0.01 eV. An increase in the humidity of the environment to 15% at room temperature increased conductivity from 10^?6 to 10^?5 Ω^?1 cm^?1, E _a = 0.27 ± 0.02 eV.     

Kinetics and mechanism of the oxidation of acrylic acid and methyl methacrylate

The kinetics of the initiated oxidation of acrylic acid and methyl methacrylate in the liquid phase were studied volumetrically by measuring oxygen uptake during the reaction. Both processes proceed via the chain mechanism with quadratic-law chain termination. The oxidation rate is described by the equation w = k ₂/(2k ₆)^1/2[monomer]w _i ^1/2 , where w _i is the initiation rate and k ₂ and k ₆ are the rate constants of chain propagation and termination. The parameter k ₂/(2k ₆)^1/2 is 7.58 × 10^?4 (l mol^?1 s^?1)^1/2 for acrylic acid oxidation and 2.09 × 10^?3 (l mol^?1 s^?1)^1/2 for the oxidation of methyl methacrylate (T = 333 K). For the oxidation of acrylic acid, k ₂ = 2.84 l mol^?1 s^?1 (T = 333 K) and the activation energy is E ₂ = 54.5 kJ/mol; for methyl methacrylate oxidation, k ₂ = 2.96 l mol^?1 s^?1 (T = 333 K) and E ₂ = 54.4 kJ/mol. The enthalpies of the reactions of RO ₂ ^? with acrylic acid and methyl methacrylate were calculated, and their activation energies were determined by the intersecting parabolas method. The contribution from the polar interaction to the activation energy was determined by comparing experimental and calculated E ₂ values: ΔE _μ = 5.7 kJ/mol for the reaction of RO ₂ ^? with acrylic acid and ΔE _μ = 0.9 kJ/mol for the reaction of RO ₂ ^? with methyl methacrylate. Experiments on the spontaneous oxidation of acrylic acid provided an estimate of the rate of chain initiation via the reaction of oxygen with the monomer: w _i,0 = (3.51 ± 0.85) × 10^?11 mol l^?1 s^?1 (T = 333 K).     

Synchronous mineralization of three aqueous non-steroidal anti-inflammatory drugs in electrochemical advanced oxidation process

Electrochemical degradation performances of three non-steroidal anti-inflammatory drugs (NSAIDs), acetaminophen (ACT), aspirin (ASP) and ibuprofen (IBP), were investigated and compared in their alone and mixture conditions using Ti/SnO₂-Sb/La-PbO₂. The pseudo-first-order degradation kinetics (k) order was k_IBP-A (0.110 min^?1) ? k_ASP-A (0.092 min^?1) ? k_ACT-A (0.066 min^?1) in their alone condition, while that was k_ACT-M (0.088 min^?1) ? k_ASP-M (0.063 min^?1) ? k_IBP-M (0.057 min^?1) in their mixture condition. The ^?OH apparent production rate constant of 5.23 mmol L^?1 min^?1 m^?2 and an electrical energy per order (E_EO) value of 6.55 Wh/L could ensure the synchronous degradation of the NSAIDs mixture. The mineralization efficiency of NSAIDs mixture was 86.9% at 240 min with a mineralization current efficiency of 1.67%. Acetic acid and oxalic acid were the main products in the mineralization process for the both conditions. In the mixture condition, there were higher k values at lower initial concentrations and higher current density, while the presence of carbonate and humic acid inhibited their degradation. The results indicated electrochemical advanced oxidation process can effectively and synchronously mineralize NSAIDs mixture in wastewater.     

CZE and ESI-MS of Borate-Sugar Complexes

Capillary zone electrophoresis (CZE) with electrospray ionization (ESI) mass spectrometry (MS) was used to study borate (B^?1) and sugar (L) complexes (L _x B^?1). Boric acid was adjusted to pH 10 with ammonium hydroxide to create an ESI-MS compatible CZE background electrolyte. We show for the first time that the electrophoretic peaks for each injected sugar contained both the substrates (i.e., sugar and/or multimers) and products (i.e., L _x B^?1). The effects of sheath liquid, temperature, and borate concentration were studied. The molecular mass information obtained from the ESI-MS provided new evidence on the mechanisms of borate-sugar complexation. Direct infusion ESI-MS and CZE-ESI-MS experiments strongly suggest that the formation of L _x B^?1 was from the direct reaction of a sugar or sugar multimer (L _x ) and B^?1. Larger L _x B^?1, where x > 2 were observed. Separation in the CZE dimension allows for the simultaneous analysis of a sugar mixture and simplified the ESI-MS analysis of sugars of the same molecular mass. The increase in sugar electrophoretic mobility caused by the increase in borate concentration was discussed in terms of the formation of L _x B^?1 complexes. In addition, the separation of five nucleosides by CZE using a borate electrolyte and detection using ESI-MS is demonstrated.     

Kinetics of vapor nitration of cellulose

The kinetics of vapor nitration of cellulose with nitric anhydride at various pressures was studied under conditions of natural convection in the absence of air, using the nonisothermal kinetic method. The process rate was found to be proportional to the N₂O₅ pressure. The nitration is described by a law of the dη/dt =k ₁/(1+βν) type, wherek ₁ = 10^3.82±0.5 exp[-(36000±(RT)]p _{N 2}O₅ s^?1. β = 10^?7.33±1.4exp[(41300±8000)/(RT)] s^?1, s^?1, within the extents of conversion from 0.04 to 0.4. At high levels of conversion, the nitration occurs with autoacceleration caused by the accumulation of the HNO₃ formed. The diffusion mechanism of vapor nitration of cellulose was suggested and discussed. The values of the effective diffusion constant for N₂O₅ in cellulose and the corresponding activation energy (38.4±2.8 kJ mol^?1) have been estimated.     

Lithium tetrahydridoaluminate LiAlH4 and hexahydridoaluminate Li3AlH6: molar heat capacity and thermodynamic properties from 10 to 300 K

The heat capacity of lithium tetra- and hexa-hydridoaluminate have been determined by adiabatic calorimetry over the range 10 to 300 K and associated thermodynamic functions have been computed. At 298.15 K the heat capacities C_p and entropies S^o are respectively 83.19 J K^?1 mol^?1 and 78.8 J K^?1 mol^?1 for LiAlH₄ and 127.75 J K^?1 mol^?1 and 102.6 J K^?1 mol^?1 for Li₃AlH₆.     

Self-reactive rating of thermal runaway hazards on 18650 lithium-ion batteries

Vent sizing package 2 (VSP2) was used to measure the thermal hazard and runaway characteristics of 18650 lithium-ion batteries, which were manufactured by Sanyo Electric Co., Ltd. Runaway reaction behaviors of these batteries were obtained: 50% state of charge (SOC), and 100% SOC. The tests evaluated the thermal hazard characteristics, such as initial exothermic temperature (T ₀), self-heating rate (dT?dt ^?1), pressure-rise rate (dP?dt ^?1), pressure temperature profiles, maximum temperature, and pressure which were observed by adiabatic calorimetric methodology via VSP2 using customized test cells. The safety assessment of lithium-ion cells proved to be an important subject. The maximum self-heating rate (dT?dt ^?1)_max and the largest pressure-rise rate (dP?dt ^?1)_max of Sanyo 18650 lithium-ion battery of 100% SOC were measured to be 37,468.8???C?min^?1 and 10,845.6?psi?min^?1, respectively, and the maximum temperature was 733.1???C. Therefore, a runaway reaction is extremely serious when a lithium-ion battery is exothermic at 100% SOC. This result also demonstrated that the thermal VSP2 is an alternative method of thermal hazard assessment for battery safety research. Finally, self-reactive ratings on thermal hazards of 18650 lithium-ion batteries were studied and elucidated to a deeper extent.     

Studies on an ionic compound (3-ATz)+ (NTO)–: crystal structure, specific heat capacity, thermal behaviors and thermal safety

A new ionic compound (3-ATz)⁺ (NTO)^?C was synthesized by the reaction of 3-amino-1,2,4-triazole (3-ATz) with 3-nitro-1,2,4-triazol-5-one (NTO) in ethanol. The single crystals suitable for X-ray diffraction measurement were obtained by crystallization at room temperature. The crystal is monoclinic, space group p _2(1)/c with crystal parameters of a?=?0.6519(2)?nm, b?=?1.9075(7)?nm, c?=?0.6766(2)?nm, ???=?94.236(4)°, R ₁?=?0.0305 and wR ₂?=?0.0789. The thermal behaviors were studied, and the apparent activation energy and pre-exponential constant of the exothermic decomposition stage were obtained by Kissinger??s method and Ozawa??s method. The self-accelerating decomposition temperature is 505.40?K, and the critical temperature of the thermal explosion is obtained as 524.90?K. The specific heat capacity was determined with Micro-DSC method and the theoretical calculation method, and the standard molar specific heat capacity is 221.31?J?mol^?1?K^?1 at 298.15?K. The Gibbs free energy of activation, enthalpy of activation, and entropy of activation are 151.55?kJ?mol^?1, 214.52?kJ?mol^?1 and 122.44?J?mol^?1?K^?1. The adiabatic time-to-explosion of the compound was estimated to be a certain value between 5.0 and 5.2?s, and the detonation velocity (D) and pressure (P) were also estimated using the nitrogen equivalent equation according to the experimental density.