Vibrational study of silicon oxidation: H2O on Si(100)

The vibrational spectrum of water dissociatively adsorbed on Si(100) surfaces is obtained with surface infrared absorption spectroscopy. Low frequency spectra (< 1450 cm⁻¹ are acquired using a buried CoSi₂ layer as an internal mirror to perform external reflection spectroscopy. On clean Si(100), water dissociates into H and OH surface species as evidenced by EELS results [1] in the literature which show a Si---H stretching vibration (2082 cm⁻¹), and SiO---H vibrations (O---H stretch at 3660 cm⁻¹ and the Si---O---H bend and Si---O stretch of the hydroxyl group centered around 820 cm⁻¹). In this paper, infrared (IR) measurements are presented which confirm and resolve the issue of a puzzling isotopic shift for the Si---O mode of the surface hydroxyl group, namely, that the Si---O stretch of the O---H surface species formed upon H₂O exposure occurs at 825 cm⁻¹, while the Si---O stretch of the ---OD surface species formed upon D₂O exposure shifts to 840 cm⁻¹, contrary to what is expected for simple reduced mass arguments. The higher resolution of IR measurements versus typical EELS measurements makes it possible to identify a new mode at 898 cm⁻¹, which is an important piece of evidence in understanding the anomalous frequency shift. By comparing the results of measurements for adsorption of H¹⁶₂O, H¹⁸₂O and D₂O with the results from recently performed first-principles calculations, it can be shown that a strong vibrational interaction between the Si---O stretching and Si---O---H bending functional group vibrations of the hydroxyl group accounts for the observed isotopic shifts.     

Stimulated Raman scattering and four-wave Raman mixing seeded by a supercontinuum generated in dibromomethane using picosecond and femtosecond laser sources

Stimulated Raman emission from liquid dibromomethane (vibrational Raman shift frequency, 588 cm⁻¹) is introduced into hydrogen gas (rotational Raman shift frequency, 587 cm⁻¹) as a seed beam, in order to generate numerous rotational lines by four-wave Raman mixing. Unexpectedly, a supercontinuum, which is generated by self-phase modulation in dibromomethane, acted as a seed beam to exclusively generate vibrational lines; the rotational lines are generated only when the supercontinuum is minimal. The former is explained by a competition between the high-gain vibrational and low-gain rotational Raman effects when strongly seeded by a supercontinuum. The latter is explained by stimulated Raman gain under the seed effect exclusively to the first-Stokes rotational line.     

Influence of the Sb dopant distribution on far infrared photoconductivity in Ge:Sb blocked impurity band detectors

Extended long wavelength response to 200 μm (50 cm⁻¹) has been observed in Ge:Sb blocked impurity band (BIB) detectors with N_D1×10¹⁶ cm⁻³. The cut-off wavelength increases from 150 μm (65 cm⁻¹) to 200 μm (50 cm⁻¹) with increasing bias. The responsivity at long wavelengths was lower than expected. This can be explained by considering the observed Sb diffusion profile in a transition region between the blocking layer and active layer. BIB modeling is presented which indicates that this Sb concentration profile increases the electric field in the transition region and reduces the field in the blocking layer. The depletion region consists partially of the transition region between the active and blocking layer, which could contribute to the reduced long wavelength response. The field spike at the interface is the likely cause of breakdown at a lower bias than expected.     

Optoacoustic study of the infrared multiphoton excitation of ethylene

The optoacoustic effect was used to detect the infrared multiphoton excitation of ethylene as a function of laser wave length and laser energy fluence. The strong absorptions were observed at 949 cm⁻¹, 953 cm⁻¹ and 939 cm⁻¹. The dependence of the energy absorption on the laser energy fluence shows that the absorption at 949 cm⁻¹ is due to the resonance of the single quantum transition whereas the absorptions at 953 cm⁻¹ and 939 cm⁻¹ are due to the resonance of the double quantum transitions. The energy shift of the later transitions was explained in terms of Fermi resonance of the overtones of v₇ and v₈ modes. The onset of highly multiple quantum transitions were observed at high laser energy fluence.     

An FTIR study of the bonding of methoxy on Ni(100): effects of coadsorbed sulfur, carbon monoxide and hydrogen

The vibrational spectra of CH₃O_(a), CD₃O_(a), CDH₂O_(a) and CD₂HO_(a) on Ni(100) are analyzed and interpreted in terms of resonances between fundamental modes and either combinations or overtones. Analysis of the symmetry of the modes observed suggests that methoxy binds normal to the surface with C_s symmetry, at least at low coverages. Two distinct vibrational bands emerge in the vibrational spectrum of methoxy in the v(CO) region as the coverage increases which are attributed to bonding in four-fold hollow sites and bridging sites. These bands exhibit blue shifts of about 25 cm⁻¹ with increasing coverage up to the saturation coverage. The vibrational bands in the v(CH) region appear concomitantly at all coverages and shift down 12 cm⁻¹ as the coverage is increased. These shifts are attributed to changes in the metal-oxygen bond which are reflected in changes in the strength of the C---O and C---H bonds. Affects on the bonding also appear to occur with the coadsorption of hydrogen or CO with methoxy. Coadsorption of 0.36 ML hydrogen with 0.04 ML methoxy induces blue shifts of 15 and 7 cm⁻¹ for the v(CO) bands at 949 and 984 cm⁻¹, respectively. Adsorbing 0.43 ML of CO with 0.04 ML methoxy (and 0.04 ML hydrogen) causes a red shift of 20 and 12 cm⁻¹ for these bands. A drastic drop in mode intensities for methoxy when CO is coadsorbed suggests that the methoxy tilts away from the surface normal. Pre-adsorbing sulfur on the Ni(100) surface reduces the amount of methoxy formed from methanol, but the v(CO) methoxy bands are unshifted in frequencies relative to their position for the same methoxy coverage on the clean surface.     

Molecular reorientational motion in liquid deuterated dimethyl-sulfoxide (DMSO-d6) from Raman line widths

The temperature dependence of depolarized Raman line widths for 2248 cm⁻¹ and 265 cm⁻¹ vibrational transitions of DMSO-d₆ was studied. The reorientational times and potential-energy barriers were determined.     

HREELS of H/GaN(0001): evidence for Ga termination

Two issues relevant to the growth and processing of GaN are the termination of the GaN(0001) surface and its reaction with hydrogen. We have used high-resolution electron energy loss spectroscopy (HREELS), low-energy electron diffraction (LEED), and Auger electron spectroscopy (AES) to study the adsorption of hydrogen on MOCVD-grown GaN(0001). LEED of the sputtered and annealed surface shows evidence of facetting. No adsorbate vibrations are observed on the clean surface by HREELS, only Fuchs–Kliewer phonons at intervals of 700 cm⁻¹. Following exposure of the clean GaN surface to hydrogen atoms, HREEL spectra show adsorbate loss peaks at 2580, 3280, and 3980 cm⁻¹. The Ga–H stretching vibration at 1880 cm⁻¹ becomes evident when the HREEL spectrum is deconvoluted to remove the phonon multiple-loss peaks. We assign the 2580, 3280, and 3980 cm⁻¹ peaks to combination modes of the Ga–H stretch and phonon(s). Upon dosing with deuterium, the Ga–D bending mode is observed at 400 cm⁻¹. No vibrational peaks due to N–H (N–D) species are observed after H (D) exposure. We conclude that sputtered and annealed GaN(0001) is Ga-terminated.     

NIR-FT-SERS of 4″-trimethylsilylethylsulfanyl-4,4′-di(phenyleneethynylene)benzenethiol on Au nanospheres

Oligo(phenyleneethynylene) (OPE) compounds have been identified as promising molecular electronic bridges. Self-assembled monolayers of 4″-trimethylsilylethylsulfanyl-4,4′-phenyleneethynylenebenzene thiol (OPE′) on Au were characterized by surface-enhanced Raman scattering (SERS). The FT-Raman spectrum of OPE′ shows three C–S bands at 834, 1086, and 1131 cm⁻¹. From the FT-Raman to the SERS spectra, the 1086 cm⁻¹ band exhibits a 9 cm⁻¹ red shift. Chemisorption of OPE′ to the gold surface occurs via oxidative cleavage of the disulfide bond and the formation of the Au–S bond. The Au–S vibration is visible in the SERS spectra at 257 cm⁻¹. Peaks due to the S–S and S–H stretch are observed at 544 and 2519 cm⁻¹, respectively, in the FT spectrum, but are unobserved in the surface-enhanced spectra. The C–H stretching region (2700–3350 cm⁻¹) in the spectrum of neat OPE′ shows three distinct bands, whereas the SERS spectra show a single broad band. Assignments of vibrational bands were based on DFT calculations performed at the B3LYP level with good agreement between theoretical and experimental values. An average percent difference of 2.52 was obtained for the non-CH stretching frequencies.     

Aggregation of phthalocyanine derivatives in liquid solutions and human blood

The aggregation of the copper (II) 4,4′,4′′,4′′′-tetrasulfonated phthalocyanine anion (Cu(tsPc)⁻⁴) has been studied in aqueous solutions, DMSO and in human blood by UV–VIS absorption spectroscopy and resonance Raman spectroscopy (RRS). The vibrational mode ν₄ (1530 cm⁻¹) has been used as a probe in RRS. It has been shown that the dimerization equilibrium constant K is shifted significantly towards monomeric forms when human blood is added to the solution. The life-time of the singlet excited state S_n of (Cu(tsPc)⁻⁴) in aqueous solution has been estimated to be shorter than 500 fs using femtosecond pump-probe absorption spectroscopy.     

II. “Spectroscopic Investigation of Charge Transfer Complexes of Osazone Intermediates Prepared From certain monosaccharides”

Monosaccharide osazones are utilized in the spectrophotometric determination of their parent compounds through charge transfer complexes (CTC) formation with three-electron acceptor reagents. These acceptors indlude iodine (as -π-acceptor) and chloranil (tetrachloro P-benzoquinone) & TCNE (tetracyano ethylene) as π-acceptors. The presence of two phenylhydrazone moieties in the osazone molecule imparts electron-donating properties toward electron-accepting reagents, yielding spectrophotometrically measurable complexes. However, the reaction of osazone intermediates with TCNE reagent gave tricyanovinyl derivative rather than CTC formation. The above complexes together with their corresponding intermediates were subjected to structure elucidation studies to confirm the results and conclusions obtained. These studies include IR, Raman spectra, H¹, C¹³-NMR, MS, ESR (electron spin resonance spectra) and microanalysis.     

Phase transitions and electrical properties of CsH(SO4)0.76(SeO4)0.24 mixed crystals

The study by X-ray diffraction, calorimetry, vibrational and impedance spectroscopy of CsH(SO₄)_0.76(SeO₄)_0.24 new solid solution is presented. Crystals of this composition undergo two phase transitions at T = 333 and 408 K. The last one at 408 K is a superionic-protonic transition (SPT) related to a rapid [HS(Se)O₄⁻] reorientation and fast H⁺ diffusion. A sudden jump in the conductivity plot confirms the presence of this transition. Above 408 K, this high temperature phase is characterized by high electrical conductivity (7 × 10^t-3 Ω⁻ cm⁻¹) and low activation energy (E_a < 0.3 eV).     

Measurement of the absolute oscillator strengths of gadolinium using an atomic vapor produced by electron beam heating

The absolute values of the oscillator strength ƒ were measured for the six spectral lines of Gd by means of laser absorption spectroscopy with the atomic vapor produced by electron beam heating. The ƒ values obtained for the transition are 0–17381 cm⁻¹, 215–17750 cm⁻¹, 533–17795 cm⁻¹, 999–18070 cm⁻¹, 999–17931 cm⁻¹, 1719–18070 cm⁻¹ were obtained to be 0.0036, 0.012, 0.014, 0.019, 0.0075 and 0.039, respectively. The error of ƒ values was 24% due to uncertainty of metastable states' density.     

A theoretical study of CHx chemisorption on the Ni(100) and Ni(111) surfaces

Cluster model calculations have been performed for CH_x, x = 0−3, chemisorbed on Ni(100) and Ni(111). The predicted chemisorption energies, at the present level of theory, based on bond-prepared clusters for Ni(100) are for carbon 150 kcal/mol, for CH 136 kcal/mol, for CH₂ 91 kcal/mol and for CH₃ 46 kcal/mol. The corresponding energies for Ni(111) are for CH 120 kcal/mol, for CH₂ 88 cal/mol and for CH₃ 49 kcal/mol. These chemisorption energies lead to similar stabilities for all CH_x fragments on both Ni(100) and Ni(111). Large basis sets and multi-reference correlation treatments are found to be very important in particular for the multiply bonded species. The vibrational C-H stretching frequencies predicted for CH_x on Ni(111) are for CH 3054 cm⁻¹ (2980 cm⁻¹), for CH₂ 3204 cm⁻¹ and for CH₃ 2709 cm⁻¹ (2680 cm⁻¹), where the available experimental values are given in parent The predicted ionization spectra of adsorbed CH_x are also in general agreement with experimental findings.     

Femtosecond laser micro-structuring of aluminium under helium

The interaction of 180 fs, 775 nm laser pulses with aluminium under a flowing stream of helium at ambient pressure have been used to study the material re-deposition, ablation rate and residual surface roughness. Threshold fluence F_th0.4 J cm⁻² and the volume ablation rate was measured to be 30<V<450 μm³ per pulse in the fluence range 1.4<F<21 J cm⁻². The presence of helium avoids gas breakdown above the substrate and leads to improved surface micro-structure by minimising surface oxidation and debris re-deposition. At 1 kHz rep. rate, with fluence F>7 J cm⁻² and >85 W cm⁻² average power density, residual thermal effects result in melt and debris formation producing poor surface micro-structure. On the contrary, surface micro-machining at low fluence F1.4 J cm⁻² with low power density, 3 W cm⁻² produces much superior surface micro-structuring with minimum melt and measured surface roughness R_a1.1±0.1 μm at a depth D50 μm. By varying the combination of fluence/scan speed during ultra-fast ablation of aluminium at 1 kHz rep. rate, results suggest that maintaining average scanned power density to <5 W cm⁻² combined with single pulse fluence <4 J cm⁻² produces near optimum micro-structuring. The debris under these conditions contains pure aluminium nanoparticles carried with the helium stream.     

Dynamical response and H-bond effects in confined liquid water

An analysis of Rayleigh wing and Raman scattering data performed in water confined in a nanoporous GelSil matrix, is presented. In the restricted translational region, the results show a strong modification of the vibrational dynamics of water in the confined state, with the disappearance of the 60 cm⁻¹ and 170 cm⁻¹ lattice bands in the VDOS. Furthermore, the collective contribution to the polarised OH stretching band comes down indicating that the tetrabonded network is destroyed.     

A pulsed laser source using stimulated Raman scattering and difference frequency mixing: Remote sensing of methane in air

Mid-infrared radiation at 3.43 μm is generated by difference frequency mixing a 1.064 μm Nd:YAG laser with a methane gas Raman shifted Nd:YAG (1.064 μm) laser at 1.54 μm in KTiOAsO₄ (KTA). Using this pulsed (7 ns), moderate energy (1 mJ) source we demonstrate the optical detection of methane in air and measure an absorption coefficient of 1.2 cm⁻¹atm⁻¹. Additional source characteristics include an intrinsic wavelength stability defined by the methane Raman vibrational frequency and a moderate linewidth (1.5 cm⁻¹).     

Emission spectroscopy of ν10 band of vinyl bromide

By pumping with a pulsed CO₂ laser we have observed many FIR emissions in vinyl bromide that we have assigned to the ν₁₀ band at 942 cm⁻¹. We have been able also to assign many other FIR lines observed in previous works, so that we have derived new spectroscopic constants for the vibrational excited level.     

The adsorbate-induced removal of the Pt{100} surface reconstruction Part I: NO

The molecular adsorption of NO on both the reconstructed (hex) and unreconstructed (1 × 1) surfaces of Pt{100} has been studied using a combination of infrared reflection-absorption spectroscopy (IRAS) and low energy electron diffraction (LEED) at temperatures between 90 and 300 K. On the (1 × 1) surface at 300 K adsorbed NO gives rise to an N-O stretching band at initially 1596 cm⁻¹ shifting to 1641 cm⁻¹ at a coverage of θ = 0.5. The LEED pattern at this coverage is interpreted in terms of a c(4 × 2) structure in which all the molecules occupy a single type of adsorption site between the on-top and bridge positions. At temperatures below 300 K, a higher coverage disordered phase is observed, giving rise to an N-O stretching band at 1680 cm⁻¹ associated with an on-top NO species. On the (hex) phase surface above 210 K, NO adsorption gives rise to bands characteristic of adsorption on the (1 × 1) phase indicating that the reconstruction is immediately lifted. Below 200 K initial adsorption actually occurs directly on the (hex) phase, resulting in a band at 1680 cm⁻¹, which is assigned to on-top NO. This band increases in intensity until, at a critical coverage dependent on temperature, the (hex) → (1 × 1) surface phase transition is induced. This is indicated by the disappearance of the band at 1680 cm⁻¹ and its replacement by bands characteristic of adsorption on islands of the (1 × 1) structure.     

Conversion of VUV to UV and visible in K5Li2LnF10 containing rare-earth from cerium group (Ln=La, Ce, Pr, Nd)

The potential of single crystals K₅Li₂LnF₁₀, for applications as VUV excited phosphors has been examined. The crystals were doped with lanthanide ions (Ce³⁺–Nd³⁺) with concentrations up to 100 at%. The self-quenching of luminescence is strongly reduced in this material. Luminescence spectra in the 50,000–10,000 cm⁻¹ range and excitation spectra in the 40,000–250,000 cm⁻¹ spectral range have been recorded at room and low temperature. Intense visible emission has been observed for Nd³⁺ and Pr³⁺. For the Pr³⁺ ions strong the ¹S₀–¹I₆ transition has been recorded only for concentrated crystals. Efficient conversion of VUV excitation to UV–VIS emission was observed in crystals doped with 3 and 100 at% of cerium. In both cerium-activated crystals the lifetimes of f–d transitions were equal to 32 ns.     

Vibrational spectroscopy of ordered oxygen adiayers on Ni/Cu(001) and Co/Cu(001) thin film systems

We report surface vibrations in c(2 × 2) oxygen adlayers on Ni and Co thin films on a Cu(001) substrate measured at gG by high resolution EELS. For the Ni thin film surface, one phonon peak is measured for varying film thicknesses from 1.3 ML (monolayer) to 6 ML with a constant energy of 221 cm⁻¹. For the Co thin film surface, three loss peaks are found, whose relative intensities change as the film thicknesses are varied. One loss peak at ˜520 cm⁻¹ is tentatively assigned to the Fuchs-Kliewer mode of cobalt oxide (CoO). The other two peaks at 317 and 376 cm⁻¹ are likely related to different bonding sites. Surface phonons on the p(2 × 2) Co thin film (389 cm⁻¹) and a bulk resonance mode (115 cm⁻¹) are also reported.