A new pathway for the rapid decay of electronically excited adenine

Combined density functional and multireference configuration interaction methods have been used to calculate the electronic spectrum of 9H-adenine, the most stable tautomer of 6-aminopurine. In addition, constrained minimum energy paths on excited potential energy hypersurfaces have been determined along several relaxation coordinates. The minimum of the first (1)[n-->pi*] state has been located at an energy of 4.54 eV for a nuclear arrangement in which the amino group is pyramidal whereas the ring system remains planar. Close by, another minimum on the S(1) potential energy hypersurface has been detected in which the C(2) center is deflected out of the molecular plane and the electronic character of S(1) corresponds to a nearly equal mixture of (1)[pi-->pi*] and (1)[n-->pi*] configurations. The adiabatic excitation energy of this minimum amounts to 4.47 eV. Vertical and adiabatic excitation energies of the lowest n-->pi* and pi-->pi* transitions as well as transition moments and their directions are in very good agreement with experimental data and lend confidence to the present quantum chemical treatment. On the S(1) potential energy hypersurface, an energetically favorable path from the singlet n-->pi* minimum toward a conical intersection with the electronic ground state has been identified. Close to the conical intersection, the six-membered ring of adenine is strongly puckered and the electronic structure of the S(1) state corresponds to a pi-->pi* excitation. The energetic accessibility of this relaxation path at about 0.1 eV above the singlet n-->pi* minimum is presumably responsible for the ultrafast decay of 9H-adenine after photoexcitation and explains why sharp vibronic peaks can only be observed in a rather narrow wavelength range above the origin. The detected mechanism should be equally applicable to adenosine and 9-methyladenine because it involves primarily geometry changes in the six-membered ring whereas the nuclear arrangement of the five-membered ring (including the N(9) center) is largely preserved.     

Electronic spectroscopy of UO2(2+), NUO(+) and NUN: an evaluation of time-dependent density functional theory for actinides

The performance of the time-dependent density functional theory (TDDFT) approach has been evaluated for the electronic spectrum of the UO(2)(2+), NUO(+) and NUN molecules. Different exchange-correlation functionals (LDA, PBE, BLYP, B3LYP, PBE0, M06, M06-L, M06-2X, CAM-B3LYP) and the SAOP model potential have been investigated, as has the relative importance of the adiabatic local density approximation (ALDA) to the exchange-correlation kernel. The vertical excitation energies have been compared with reference data obtained using accurate wave-function theory (WFT) methods.     

TD-CI simulation of the electronic optical response of molecules in intense fields II: comparison of DFT functionals and EOM-CCSD

Time-dependent configuration interaction (TD-CI) simulations can be used to simulate molecules in intense laser fields. TD-CI calculations use the excitation energies and transition dipoles calculated in the absence of a field. The EOM-CCSD method provides a good estimate of the field-free excited states but is rather expensive. Linear-response time-dependent density functional theory (TD-DFT) is an inexpensive alternative for computing the field-free excitation energies and transition dipoles needed for TD-CI simulations. Linear-response TD-DFT calculations were carried out with standard functionals (B3LYP, BH&HLYP, HSE2PBE (HSE03), BLYP, PBE, PW91, and TPSS) and long-range corrected functionals (LC-ωPBE, ωB97XD, CAM-B3LYP, LC-BLYP, LC-PBE, LC-PW91, and LC-TPSS). These calculations used the 6-31G(d,p) basis set augmented with three sets of diffuse sp functions on each heavy atom. Butadiene was employed as a test case, and 500 excited states were calculated with each functional. Standard functionals yield average excitation energies that are significantly lower than the EOM-CC, while long-range corrected functionals tend to produce average excitation energies slightly higher. Long-range corrected functionals also yield transition dipoles that are somewhat larger than EOM-CC on average. The TD-CI simulations were carried out with a three-cycle Gaussian pulse (ω = 0.06 au, 760 nm) with intensities up to 1.26 × 10(14) W cm(-2) directed along the vector connecting the end carbons. The nonlinear response as indicated by the residual populations of the excited states after the pulse is far too large with standard functionals, primarily because the excitation energies are too low. The LC-ωPBE, LC-PBE, LC-PW91, and LC-TPSS long-range corrected functionals produce responses comparable to EOM-CC.     

Density functional theory studies on the electronic and vibrational spectra of octaethylporphyrin diacid

The ground-state structure and electronic and vibrational spectra of octaethylporphyrin diacid (H4OEP2+) have been studied with the density functional theory. The geometrical parameters computed with B3LYP, PBE1PBE and mPW1PW91 functionals and 6-31G* basis sets are well consistent with the experimental values. Electronic absorption spectrum of H4OEP2+ has been studied with the time-dependent DFT method, and the calculated excitation energies and oscillator strengths are compared with the experimental results. The Raman and IR spectra of H4OEP2+ and the Raman spectrum of its N-deuterated analogue (D4OEP2+) were measured. The observed Raman and IR bands have been assigned based on the frequency calculations at the B3LYP/6-31G* level of theory.     

Structural and electronic properties of polyacetylene and polyyne from hybrid and Coulomb-attenuated density functionals

The bond length alternation (BLA), the highest-occupied-lowest-unoccupied (HO-LU) orbital energy gap, and the corresponding excitation energy are determined for trans-polyacetylene (PA) and polyyne (PY) using density functional theory. Results from the Coulomb-attenuated CAM-B3LYP functional are compared with those from the conventional BHHLYP and B3LYP hybrid functionals. BLA values and HO-LU gaps are determined using both finite oligomer and infinite chain calculations, subject to periodic boundary conditions. TDDFT excitation energies are determined for the oligomers. The oligomer excitation energies and HO-LU gaps are then used, in conjunction with the infinite chain HO-LU gap, to estimate the infinite chain excitation energy. Overall, BHHLYP and CAM-B3LYP give BLA values and excitation energies that are larger and more accurate than those obtained using B3LYP. The results highlight the degree to which excitation energies can be approximated using the HO-LU gaps-at the infinite limit, this approximation works well for B3LYP, but not for the other functionals, where the HO-LU gap is significantly larger. The study provides further evidence for the high-quality theoretical predictions that can be obtained from the CAM-B3LYP functional.     

Synthesis, characterization, crystal structure and DFT studies on 1-acetyl-3-(2,4-dichloro-5-fluoro-phenyl)-5-phenyl-pyrazoline

The title compound, 1-acetyl-3-(2,4-dichloro-5-fluoro-phenyl)-5-phenyl-pyrazoline, has been synthesized and characterized by elemental analysis, IR, UV-vis and X-ray single crystal diffraction. Density functional (DFT) calculations have been carried out for the title compound by using B3LYP method at 6-31G* basis set. The calculated results show that the predicted geometry can well reproduce the structural parameters. Predicted vibrational frequencies have been assigned and compared with experimental IR spectra and they are supported each other. The theoretical electronic absorption spectra have been calculated by using TD-DFT method. Molecular orbital coefficients analyses suggest that the above electronic transitions are mainly assigned to n-->pi* and pi-->pi* electronic transitions. On the basis of vibrational analyses, the thermodynamic properties of the title compound at different temperatures have been calculated, revealing the correlations between C(p,m)(0),S(m)(0),H(m)(0) and temperatures.     

Assessment of a Coulomb-attenuated exchange-correlation energy functional

The recently proposed CAM-B3LYP exchange-correlation energy functional, based on a partitioning of the r operator in the exchange interaction into long- and short-range components, is assessed for the determination of molecular thermochemistry, structures, and second order response properties. Rydberg and charge transfer excitation energies and static electronic polarisabilities are notably improved over the standard B3LYP functional; classical reaction barriers also improve. Ionisation potentials, bond lengths, NMR shielding constants and indirect spin-spin coupling constants are comparable with the two functionals. CAM-B3LYP atomisation energies and diatomic harmonic vibrational wavenumbers are less accurate than those of B3LYP. Future research directions are outlined.     

Ab initio n-electron valence state perturbation theory study of the adiabatic transitions in carbonyl molecules: formaldehyde, acetaldehyde, and acetone

The application of the recently developed second-order n-electron valence state perturbation theory (NEVPT2) to small carbonyl molecules (formaldehyde, acetaldehyde, and acetone) is presented. The adiabatic transition energies are computed for the singlet and triplet n-->pi(*), pi-->pi(*), and sigma-->pi(*) states performing a full geometry optimization of the relevant states at the single state CASSCF level and taking into account the zero point energy correction in the harmonic approximation. The agreement with the known experimental values and with previously published high level calculations confirms that NEVPT2 is an efficient tool to be used for the interpretation of molecular electronic spectra. Moreover, different insight into the nature of the excited states has been obtained. Some of the transitions presented here have never been theoretically computed previously [(3)(pi-->pi(*)) and (3)(sigma-->pi(*)) adiabatic transitions in acetaldehyde and acetone] or have been studied only using moderate level (single reference based) ab initio methods (all adiabatic transitions in acetaldehyde). In the present work a consistent disagreement between NEVPT2 and experiment has been found for the (3)(pi-->pi(*)) adiabatic transition in all molecules: this result is attributed to the low intensity of the transition to the first vibrational levels of the excited state. The n-->pi(*) singlet and triplet vertical transition energies are also reported for all the molecules.     

Density functional analysis of geometries and electronic structures of gold-phosphine clusters. The case of Au4(PR3)42+ and A(u4μ2-I)2(PR3)4

Geometries, ligand binding energies, electronic structure, and excitation spectra are determined for Au(4)(PR(3))(4)(2+) and Au(4)(μ(2)-I)(2)(PR(3))(4) clusters (R = PH(3), PMe(3), and PPh(3)). Density functionals including SVWN5, Xα, OPBE, LC-ωPBE, TPSS, PBE0, CAM-B3LYP, and SAOP are employed with basis sets ranging from LANL2DZ to SDD to TZVP. Metal--metal and metal--ligand bond distances are calculated and compared with experiment. The effect of changing the phosphine ligands is assessed for geometries and excitation spectra. Standard DFT and hybrid ONIOM calculations are employed for geometry optimizations with PPh(3) groups. The electronic structure of the gold--phosphine clusters examined in this work is analyzed in terms of cluster ("superatom") orbitals and d-band orbitals. Transitions out of the d band are significant in the excitation spectra. The use of different basis sets and DFT functionals leads to noticeable variations in the relative intensities of strong transitions, although the overall spectral profile remains qualitatively unchanged. The replacement of PMe(3) with PPh(3) changes the nature of the electronic transitions in the cluster due to low-lying π*-orbitals. To reproduce the experimental geometries of clusters with PPh(3) ligands, computationally less expensive PH(3) or PMe(3) ligands are sufficient for geometry optimizations. However, to predict cluster excitation spectra, the full PPh(3) ligand must be considered.     

Are azobenzenophanes rotation-restricted?

We simulated the photoisomerization dynamics of an azobenzenophane with a semiclassical surface hopping approach and a semiempirical reparametrized quantum mechanics/molecular mechanics Hamiltonian. Only one of the two azobenzene chromophores in the molecule is taken into account quantum mechanically: the other one is treated by molecular mechanics. Both n-->pi* and pi-->pi* excitations are considered. Our results show that the photoisomerization reaction mainly involves the rotation around the N=N double bond. The excited state relaxation features are in qualitative agreement with experimental time-resolved fluorescence results.     

The electronic absorption spectra of pyridine azides, solvent-solute interaction

The electronic absorption spectra of: 2-, 3-, and 4-azidopyridines have been investigated in a wide variety of polar and non-polar solvents. According to Onsager model, the studied spectra indicate that the orientation polarization of solvent dipoles affects the electronic spectrum much stronger than the induction polarization of solvent dipoles. The effect of solvent dipole moment predominates that of solvent refractive index in determining the values of band maxima of an electronic spectrum. The spectra of azidopyridines differ basically from these of pyridine or mono-substituted pyridine. Results at hand indicate that the azide group perturbs the pyridine ring in the case of 3-azidopyridine much more than it does in the case of 2-azidopyridine. This result agrees with the predictions of the resonance theory. Although the equilibrium <==> azide tetrazole is well known, yet the observed spectra prove that such an equilibrium does not exist at the studied conditions. The spectra of the studied azidopyridines are characterized by the existence of overlapping transitions. Gaussian analysis is used to obtain nice, resolved spectra. All the observed bands correspond to pi-->pi* transitions, n-->pi* may be overlapped with the stronger pi-->pi* ones.     

The excited states of adenine and thymine nucleoside and nucleotide in aqueous solution: a comparative study by time-dependent DFT calculations

The effect substitutions at nitrogen atom 1 of thymine and nitrogen atom 9 of adenine have on lowest energy excited electronic states has been studied by means of time-dependent PBE0 calculations in aqueous solution. In agreement with the experimental indications, the vertical excitation energy of the bright state of 1,methyl-thymine, thymine nucleoside and thymine nucleotide is red-shifted with respect to that of thymine. Deoxyribose and deoxyribose-phosphate substituents affect mainly the lowest energy dark state of adenine and thymine, slightly increasing their oscillator strength. The excited states of 9, methyl-adenine and 1, methyl-thymine have also been studied by using the recently developed M052X, CAM-B3LYP and LC-ωPBE density functionals. The computed VEE are in good agreement with those obtained by using PBE0, which, however, provides values closer to the experimental band maximum.     

Solvent effects on the n-->pi* electronic transition in formaldehyde: a combined coupled cluster/molecular dynamics study

We present a study of the blueshift of the n-->pi* electronic transition in formaldehyde in aqueous solution using a combined coupled cluster/molecular mechanics model including mutual polarization effects in the Hamiltonian. In addition, we report ground and excited state dipole moments. Configurations are generated from molecular dynamics simulations with two different force fields, one with and one without an explicit polarization contribution. A statistical analysis using 1200 configurations is presented. Effects of explicit polarization contributions are found to be significant. It is found that the main difference in the effects on the excitation energies arises from the fact that the two force fields result in different liquid structures, and thus a different set of configurations is generated for the coupled cluster/molecular mechanics calculations.     

Thermal and solvent effects on the NMR and UV parameters of some bioreductive drugs

15N NMR chemical shifts and n-->pi* electronic transition energy for metronidazole (1) has been calculated and compared with experimental data. A detailed computational study of 1 is presented, with special attention to the performance of various theoretical methods for reproducing spectroscopic parameters in solution. The most sophisticated approach involves density functional based on the Car-Parrinello molecular dynamics simulations of 1 in aqueous solution (BP86 level) and averaging chemical shifts and deltaE(n-->pi*) over snapshots from the trajectory. In the NMR and UV calculations for these snapshots (performed at the B3LYP level), a small number of discrete water molecules are retained, and the remaining bulk solution effects are included via a polarizable continuum model (PCM). A good agreement with experiment is also obtained using static geometry optimization and NMR computation of pristine 1 employing a PCM approach. Further theoretical predictions are also reported for 17O NMR and deltaE(n-->pi*) of three hydroxycinnamic acid derivatives, which suggest that it is essential to incorporate the dynamics and solvent effects for NMR and UV calculations in the condensed phase.     

Theoretical investigation of the energies and geometries of photoexcited uranyl(VI) ion: a comparison between wave-function theory and density functional theory

In order to assess the accuracy of wave-function and density functional theory (DFT) based methods for excited states of the uranyl(VI) UO2(2+) molecule excitation energies and geometries of states originating from excitation from the sigma(u), sigma(g), pi(u), and pi(g) orbitals to the nonbonding 5f(delta) and 5f(phi) have been calculated with different methods. The investigation included linear-response CCSD (LR-CCSD), multiconfigurational perturbation theory (CASSCFCASPT2), size-extensivity corrected multireference configuration interaction (MRCI) and AQCC, and the DFT based methods time-dependent density functional theory (TD-DFT) with different functionals and the hybrid DFTMRCI method. Excellent agreement between all nonperturbative wave-function based methods was obtained. CASPT2 does not give energies in agreement with the nonperturbative wave-function based methods, and neither does TD-DFT, in particular, for the higher excitations. The CAM-B3LYP functional, which has a corrected asymptotic behavior, improves the accuracy especially in the higher region of the electronic spectrum. The hybrid DFTMRCI method performs better than TD-DFT, again compared to the nonperturbative wave-function based results. However, TD-DFT, with common functionals such as B3LYP, yields acceptable geometries and relaxation energies for all excited states compared to LR-CCSD. The structure of excited states corresponding to excitation out of the highest occupied sigma(u) orbital are symmetric while that arising from excitations out of the pi(u) orbitals have asymmetric structures. The distant oxygen atom acquires a radical character and likely becomes a strong proton acceptor. These electronic states may play an important role in photoinduced proton exchange with a water molecule of the aqueous environment.     

Computational study of static first hyperpolarizability of donor-acceptor substituted (E)-benzaldehyde phenylhydrazone

Various hybrid functionals (B3LYP, B97-2, PBE0, BMK, BH&HLYP, CAM-B3LYP, and LC-ωPBE) implemented in density functional theory were applied to give estimate of static first hyperpolarizabilty (β(0)) of (E)-benzaldehyde phenylhydrazone designated as (E)-BPH. Against those of MP2 computations as a function of the underlying density functional, good agreement was obtained with the BH&HLYP and CAM-B3LYP functionals. The LC-ωPBE functional and the B3LYP, PBE0, B97-2, and BMK functionals underestimated and overestimated β(0), respectively. The basis set effect on the calculated β(0) was also investigated. It turned out that the 6-311+G(2d,p) basis set provided excellent converged value of β(0). On the basis of the calculated results, we investigated the substituent effect on β(0) of donor-acceptor (D-A) substituted (E)-BPH systematically by using the BH&HLYP and CAM-B3LYP computations with the 6-311+G(2d,p) basis set. We proposed a Zwitterion structure to explain the calculated trend in the substituent effect and the enhanced hyperpolarizability of type II compounds (A-(E)-BPH-D) than type I compounds (D-(E)-BPH-A). Natural bonding orbital analysis carried out at BH&HLYP/6-311+G(2d,p)//B3LYP/6-31G(2df,p) level of theory substantiated the claim.     

UV resonance raman investigation of electronic transitions in alpha-helical and polyproline II-like conformations

UV resonance Raman (UVRR) excitation profiles and Raman depolarization ratios were measured for a 21-residue predominantly alanine peptide, AAAAA(AAARA) 3A (AP), excited between 194 and 218 nm. Excitation within the pi-->pi* electronic transitions of the amide group results in UVRR spectra dominated by amide vibrations. The Raman cross sections and excitation profiles provide information about the nature of the electronic transitions of the alpha-helix and polyproline II (PPII)-like peptide conformations. AP is known to be predominantly alpha-helical at low temperatures and to take on a PPII helix-like conformation at high temperatures. The PPII-like and alpha-helix conformations show distinctly different Raman excitation profiles. The PPII-like conformation cross sections are approximately twice those of the alpha-helix. This is due to hypochromism that results from excitonic interactions between the NV 1 transition of one amide group with higher energy electronic transitions of other amide groups, which decreases the alpha-helical NV 1 (pi-->pi*) oscillator strengths. Excitation profiles of the alpha-helix and PPII-like conformations indicate that the highest signal-to-noise Raman spectra of alpha-helix and PPII-like conformations are obtained at excitation wavelengths of 194 and 198 nm, respectively. We also see evidence of at least two electronic transitions underlying the Raman excitation profiles of both the alpha-helical and the PPII-like conformations. In addition to the well-known approximately 190 nm pi-->pi* transitions, the Raman excitation profiles and Raman depolarization ratio measurements show features between 205-207 nm, which in the alpha-helix likely results from the parallel excitonic component. The PPII-like helix appears to also undergo excitonic splitting of its pi-->pi* transition which leads to a 207 nm feature.     

Ab initio investigation of the n --> pi* transitions in thiocarbonyl dyes

The n --> pi* transitions in more than 100 thiocarbonyl dyes have been calculated with an ab initio procedure relying on the combination of time-dependent density functional theory (TD-DFT) for evaluating excited states and the polarizable continuum model (PCM) for modeling the bulk solvent effects on both the geometrical and electronic structures. Two hybrid functionals (B3LYP and PBE0) and several basis sets, some including f polarization functions, have been used. B3LYP provides the most accurate raw estimates, but once simple linear regression is performed, both functionals give similar results with a small advantage for PBE0. By use of the latter, the mean absolute deviation with respect to experiment is limited to 0.06 eV whereas less than 20% of the estimates differ from absorption data by more than 0.10 eV. To assess the validity limits of our model, compounds containing multiple C=S chromophores have also been considered.     

Theoretical study of the ground and excited states of 7-methyl guanine and 9-methyl guanine: comparison with experiment

The keto-enol tautomerization of 7-methyl-guanine and 9-methyl-guanine in the excited state was investigated using the time-dependent DFT (TDDFT) method. For both species, the potential energy surfaces of the ground state and two lowest singlet excited states (due to pi-->pi* and n-->pi* transitions) have been investigated and their features discussed in terms of consequences on the excited state dynamics. The findings suggest that, for both species, the state due to the n-->pi* transition, suspected to be an intermediate in the excited state deactivation, exhibits two minima with the second minimum characterized by an elongated N1-H distance. This structure, intermediate between enol and keto tautomers, might play a role in the excited state relaxation. The existence of this second well, however, is observed in both 7- and 9-methyl-guanine, which suggests that it cannot account alone for the different photophysical behavior of these species.