Facile synthesis of multifunctional multiwalled carbon nanotubes/Fe3O4 nanoparticles/polyaniline composite nanotubes

With an average diameter of 100-150 nm, composite nanotubes of polyaniline (PANI)/multiwalled carbon nanotubes (MWNTs) containing Fe₃O₄ nanoparticles (NPs) were synthesized by a two-step method. First, we synthesized monodispersed Fe₃O₄ NPs (d=17.6 nm, σ=1.92 nm) on the surface of MWNTs and then decorated the nanocomposites with a PANI layer via a self-assembly method. SEM and TEM images indicated that the obtained samples had the morphologies of nanotubes. The molecular structure and composition of MWNTs/Fe₃O₄ NPs/PANI nanotubes were characterized by Fourier transform infrared spectra (FTIR), energy dispersive X-ray spectrometry (EDX), X-ray photoelectron spectra (XPS), X-ray diffraction (XRD) and Raman spectra. UV-vis spectra confirmed the existence of PANI and its response to acid and alkali. As a multifunctional material, the conductivity and magnetic properties of MWNTs/Fe₃O₄ NPs/PANI composites nanotubes were also investigated.     

Thermal degradation of polyaniline films prepared in solutions of strong and weak acids and in water - FTIR and Raman spectroscopic studies

Polyaniline (PANI) films were prepared in situ on silicon windows during the oxidation of aniline with ammonium peroxydisulfate in aqueous solutions of strong (0.1 M sulfuric) or weak (0.4 M acetic) acid or without any acid. In solutions of sulfuric acid, a granular PANI is produced, in solutions of weak acids or without any acid, PANI nanotubes are obtained. The thermal stability and structural variation of the corresponding films produced on silicon windows during treatment at 80 °C for three months were studied by FTIR and Raman spectroscopies. The morphology of the films is preserved during the degradation but the molecular structure changes. The results indicate that the spectral changes correspond to deprotonation, oxidation and chemical crosslinking reactions. The films of PANI salts loose their protonating acid. PANI bases are more stable than the salt forms during thermal ageing. The films obtained in water or in the presence of acetic acid are more stable than those prepared in solutions of sulfuric acid. The protonated structure is more prone to crosslinking reactions than deprotonated one. The molecular structure corresponding to the nanotubular morphology, which contains the crosslinked phenazine- and oxazine-like groups, is more stable than the molecular structure of the granular morphology.     

Influence of carbon shell structure on electrochemical performance of multi-walled carbon nanotube electrodes

Core/shell nanostructures have received considerable attention due to the synergistic effect of their combination of materials. In this work, core/shell carbon/multi walled carbon nanotubes (MWNTs) (C-MWNTs) composed of core MWNTs and carbon shells were prepared to obtain a new type of carbon electrode materials. Carbon shells containing nitrogen groups were prepared by coating polyaniline (PANI) onto the MWNTs by in situ polymerization and subsequent carbonization at 850 °C. After carbonization, the C-MWNTs contained 5.84% nitrogen and showed a hollow structure and crystallinity like that of pristine MWNTs. In addition, the C-MWNTs exhibited electrochemical performance superior to that of pristine MWNTs, and the highest specific capacitance (231 F g⁻¹) of the C-MWNTs was obtained at a scan rate of 0.1 A g⁻¹, as compared to 152 F g⁻¹ for pristine MWNTs. This superior performance is attributed to the maintenance of high electrical conductivity by the π–π interaction between the carbon layer and the MWNTs, increased specific surface area of C-MWNTs, and the presence of nitrogen groups formed on the carbon electrode after the carbonization of the shell PANI.     

Highly carbonized polyaniline micro- and nanotubes

We have obtained unique highly carbonized polyaniline micro- and nanotubes as a new, thermally stable nanomaterial for nanosensors and nanodevices with a wide range of possible applications, comparable to carbon nanotubes. Polyaniline nanostructures are easy to prepare and handle in wet conditions, including controlled growth. Temperature-induced transformations of polyaniline micro- and nanotubes into highly carbonized analogues have been observed at and above 800 °C, while the temperature was elevated slowly from 20 °C up to 1100 °C. Carbonized products have the same morphology (micro- and nanotubes), but a lower spin density than the starting material (e.g. 10¹⁴ g⁻¹ for the sample heated at and above 800 °C, and 10¹⁹ g⁻¹ before heating). Simultaneously, the electrical conductivity changes from 7.4 × 10⁻⁵ S/cm for the starting material to 4.8 × 10⁻⁹ S/cm, 1.3 × 10⁻¹¹ S/cm and finally 2.4 × 10⁻⁶ S/cm for samples obtained at room temperature, 250 °C, 500 °C and 800 °C, respectively. Chemical transformations and unique molecular structures formed are discussed. Applications in nanotechnology, including sensors and electronic nanodevices, are expected in the light of experiments already performed.     

The stability of polyaniline in strongly alkaline or acidic aqueous media

Polyaniline (PANI) base has been suspended in 9 M potassium hydroxide at 20 °C or 90 °C for various time intervals extending to 4 months. The fraction of acetone-soluble material increased from 1.2 wt.% to 4.5 wt.% after exposure to an alkaline medium for 60 days at 20 °C. Gel-permeation chromatography indicates that the aggregation of PANI is reduced, while the chain degradation itself is negligible. FTIR spectroscopy confirms this trend and the absence of hydrolytic changes in the PANI structure. Polyaniline retains the ability to be reprotonated with a 1 M sulfuric acid to a conducting form. No marked changes in the molecular structure have been found, even after suspension of PANI in 9 M KOH at 90 °C for 60 days.Similar immersion of PANI salt in 5 M sulfuric acid at 20 °C was responsible for changes in the protonation, and the mass increased by 11 wt.%. This was explained by the exchange of the original sulfate or chloride counter-ions for hydrogen sulfate anions or by the protonation of secondary amine sites in PANI in addition to imine ones. The changes in the molecular structure are discussed on the basis of FTIR spectra. The conductivity decreased from 1.2 S cm⁻¹ to ∼10⁻³ S cm⁻¹ but no time-dependence of conductivity was observed. There was no fraction of PANI soluble in acetone. PANI in the protonated state is thus stable also in the strongly acidic medium.The study is supplemented by the assessment of the thermal stability of PANI base, which is of importance for the processing of PANI. Loss of moisture has been observed after exposure to 250 °C for 10 h in both nitrogen atmosphere and in air. Good stability was found at 350 °C only in the nitrogen atmosphere, while a marked mass loss in weight was registered in air.     

Microwave-assisted synthesis and electrochemical capacitance of polyaniline/multi-wall carbon nanotubes composite

Polyaniline/multi-wall carbon nanotubes composite (PANI/MWNTs) was rapidly synthesized by microwave-assisted polymerization. Transmission electron microscope (TEM) image revealed that this composite was a core–shell structure with PANI layers (50–70 nm). Electrochemical behavior of the composite was evaluated by cyclic voltammetry (CV) and galvanostatic charge–discharge tests with a two-electrode system. An enhanced specific capacitance of 322 F/g with a specific energy density of 22 W h/kg was about 12 times that of MWNTs. This composite also exhibited a good rate capability, retaining up to 87% of initial capacity at a current density of 5 mA/cm².     

Polymer/carbon nanotube nanocomposites: Influence of carbon nanotubes on EVA photodegradation

The influence of carbon nanotubes on the photodegradation of EVA/carbon nanotube nanocomposites was studied by irradiation under photooxidative conditions (at λ > 300 nm, at 60 °C and in the presence of oxygen). The influence of the nanotubes on both the photooxidation mechanism of EVA and the rates of oxidation of the matrix was characterized on the basis of infrared analysis. On one hand, it was shown that the carbon nanotubes act as inner filters and antioxidants, which contribute to reduction in the rate of photooxidation of the polymeric matrix. On the other hand, it was shown that light absorption could provoke an increase in the local temperature and then induce the photooxidation of the polymer. The competition between these three effects determines the global rate of photooxidation of the polymeric matrix. Several factors are involved, the concentration of the carbon nanotubes, the morphology of the nanotubes and the functionalization of the nanotube surface.     

Fabrication of polyaniline/carbon nanotube composite modified electrode and its electrocatalytic property to the reduction of nitrite

A polyaniline (PANI)/carbon nanotubes (CNTs) composite modified electrode was fabricated by galvanostatic electropolymerization of aniline on multi-walled carbon nanotubes (MWNTs)-modified gold electrode. The electrode thus prepared exhibits enhanced electrocatalytic behavior to the reduction of nitrite and facilitates the detection of nitrite at an applied potential of 0.0 V. Although the amperometric responses toward nitrite at MWNTs/gold and PANI/gold electrodes have also been observed in the experiments, these responses are far less than that obtained at PANI/MWNTs/gold electrode. The effects of electropolymerization time, MWNTs concentration and pH value of the detection solution on the current response of the composite modified electrode toward sodium nitrite, were investigated and discussed. A linear range from 5.0 × 10⁻⁶ to 1.5 × 10⁻² M for the detection of sodium nitrite has been observed at the PANI/MWNTs modified electrode with a sensitivity of 719.2 mA M⁻¹ cm⁻² and a detection limit of 1.0 μM based on a signal-to-noise ratio of 3.     

Facile fabrication and characterization of novel polyaniline/titanate composite nanotubes directed by block copolymer

In this work, we present a facile method for preparation of novel polyaniline(PANI)/titanate composite nanotubes by in situ chemical oxidative polymerization directed by poly(ethylene oxide)-poly(propylene oxide)-poly(ethylene oxide) (PEO-PPO-PEO) triblock copolymer. The block copolymer adsorbed onto the surface of the titanate nanotubes acts as a soft template. The obtained nanocomposite has a core-shell structure in which titanate nanotubes are encapsulated by uniform PANI layers. Their structure and morphology were characterized by various experimental techniques. A possible formation mechanism of composite nanotubes is also proposed in the paper.     

Influence of silver-decorated multi-walled carbon nanotubes on electrochemical performance of polyaniline-based electrodes

In this work, silver (Ag) nanoparticles were deposited on multi-walled carbon nanotubes (MWNTs) by chemical reduction while Ag-decorated MWNTs (Ag-MWNTs)/polyaniline (PANI) composites were prepared by oxidation polymerization. The effect of the Ag incorporated into the interface of the composites on the electrochemical performance of the MWNTs/PANI was investigated. It was found that highly dispersed Ag nanoparticles were deposited onto the MWNTs, and the Ag-MWNTs were successfully coated by PANI. According to cyclic voltammograms, the Ag-MWNTs/PANI exhibited significantly increased electrochemical performances compared to MWNTs/PANI and the highest specific capacitance obtained of MWNTs/PANI and 0.15 M Ag-MWNTs/PANI was 162 F/g and 205 F/g, respectively. This indicated that Ag nanoparticles that were deposited onto the MWNTs caused an enhanced electrochemical performance of the MWNTs/PANI due to their high electric conductivity, which resulted in an increase of the charge transfer between the MWNTs and PANI by a bridge effect.     

Synthesis of straight and helical carbon nanotubes from catalytic pyrolysis of polyethylene

Straight and helical carbon nanotubes with diameter from 20 to 60 nm have been synthesized through catalytic decomposition of polyethylene in autoclave at 700 °C. The X-ray power diffraction pattern indicates that the products are hexagonal graphite, and transmission electron microscope (TEM) and high resolution transmission electron microscope (HRTEM) images reveal the morphologies and structures of carbon nanotubes. The effects of reaction temperature, catalyst and maleated polypropylene on the growth of the carbon nanotubes were also discussed, and the growth mechanism of the CNTs was proposed. Pyrolysis of polyethylene is a promising green chemical method for economically producing carbon nanotubes.     

Enhancement of a conducting polymer-based biosensor using carbon nanotube-doped polyaniline

A biosensor with improved performance was developed through the immobilization of horseradish peroxidase (HRP) onto electropolymerized polyaniline (PANI) films doped with carbon nanotubes (CNTs). The effects of electropolymerization cycle and CNT concentration on the response of the biosensor toward H₂O₂ were investigated. It was found that the application of CNTs in the biosensor system could increase the amount and stability of the immobilized enzyme, and greatly enhanced the biosensor response. Compared with the biosensor without CNTs, the proposed biosensor exhibited enhanced stability and approximately eight-fold sensitivity. A linear range from 0.2 to 19 μM for the detection of H₂O₂ was observed for the proposed biosensor, with a detection limit of 68 nM at a signal-to-noise ratio of 3 and a response time of less than 5 s.     

Effects of the polymerization temperature on the structure,morphology and conductivity of polyaniline prepared with ammonium peroxodisulfate

Polyaniline (PANI) samples were prepared by the oxidation of aniline with ammonium peroxodisulfate in a reaction vessel placed in a bath thermostated to particular temperature, T_b, from −20 °C to 40 °C. Temperature–time profiles of reaction mixtures were monitored except for the reaction at −20 °C that proceeded in the solid state. The temperature regime was found to influence the molecular structure, morphology, crystallinity and electrical conductivity of PANI. The increase in T_b results in an increased content of meanwhile unspecified structure defects in the formed PANI chains (the presence of attached self-doping groups is improbable), decreased crystallinity, toughness and compactness of PANI microparticles and increased steepness of the temperature dependence of PANI conductivity. The PANI prepared in the solid-state polymerization at −20 °C shows, besides a rather high crystallinity, the unusually high position of the quinonoid band maximum: 643 nm, which suggests a high regularity of its chains. A correlation between the temperature dependence of PANI conductivity at low temperatures (range from 13 to 318 K) on one hand and the temperature regime of PANI preparation on the other hand, is reported for the first time. The dependences obtained only poorly meet the variable random hopping model.     

Structural and conductivity changes during the pyrolysis of polyaniline base

Polyaniline base has been exposed to various temperatures between 100 °C and 1000 °C for 2 h in air. The mass loss has increased with increasing temperature. FTIR and Raman spectroscopies show the gradual destruction of the PANI structure, the possible formation of intermediate oxime and nitrile groups, and the final conversion to graphitic material. The elemental analysis confirmed the dehydrogenation while the content of nitrogen was nearly constant even after treatment at 800 °C. The conductivity of PANI base, 10⁻⁸ S cm⁻¹, increased to ∼10⁻⁴ S cm⁻¹ after treatment at 1000 °C; most of the products, however, were non-conducting. Another series of experiments involved the polyaniline base heated at 500 °C for 1-8 h. The studies were performed in connection with the potential flame-retardant application of polyaniline.     

Natural rubber nanocomposites with SiC nanoparticles and carbon nanotubes

Single-walled carbon nanotubes (SWNTs) and SiC nanoparticles were dispersed in natural rubber (NR) polymer solution and subsequently evaporated the solvent to prepare NR nanocomposites. Using this technique, nanoparticles can be better dispersed in the NR matrix. The influence of nano-fillers on the mechanical properties of the resulting nanocomposites was quantified.Mechanical test results show an increase in the initial modulus with nanoscale reinforcements for up to 50% strain compared to pure NR. The modulus and strength of natural rubber with 1.5% SiC nanoparticles appear to be superior to those of SWNTs with the same filler content. In addition to mechanical testing, these nanocomposites were studied using the SEM and Raman spectroscopy techniques in order to understand the morphology of the resulting system and the load transfer mechanism, respectively. The Raman spectrum of the SWNT/NR system is characterized by a strong band at 1595 cm⁻¹ (G mode—C-C stretching) and other two bands at 1300 cm⁻¹ (D mode-disorder induced) and 2590 cm⁻¹ (D* band). A shift of the 2590 cm⁻¹ Raman band to the lower wavenumber was observed after subjecting SWNT/NR sample to cyclic stress testing. Ageing SWNT/NR specimen in distilled water for 30 days also provided a similar result. The Raman shift in aged samples indicates internal stress transfer from the natural rubber matrix to the SWNTs implying the existence of bonding at the interface.     

Multi-wall carbon nanotubes with nitrogen-containing carbon coating

Polyaniline coating was deposited on the surface of multi-wall carbon nanotubes of Russian and Taiwanese origin in situ during the polymerization of aniline. The deposited polyaniline film was subsequently carbonized under an inert atmosphere at various temperatures to produce coaxial coating of the carbon nanotubes with nitrogen-containing carbon. The new materials were investigated by infrared and Raman spectroscopies, which demonstrated the conversion of the polyaniline coating to a carbonized structure. X-ray photoelectron spectroscopy proved that the carbonized overlayer contains nitrogen atoms in various covalent bonding states. Transmission electron microscopy confirmed the coaxial structure of the composites. The Brunauer-Emmett-Teller method was used to estimate the specific surface area, the highest being 272 m² g^?1. The conductivity of 0.9–16 S cm^?1 was measured by the four-point method, and it was only a little affected by the carbonization of the polyaniline coating.     

Electrochemical DNA biosensors based on platinum nanoparticles combined carbon nanotubes

Platinum nanoparticles were used in combination with multi-walled carbon nanotubes (MWCNTs) for fabricating sensitivity-enhanced electrochemical DNA biosensor. Multi-walled carbon nanotubes and platinum nanoparticles were dispersed in Nafion, which were used to fabricate the modification of the glassy carbon electrode (GCE) surface. Oligonucleotides with amino groups at the 5′ end were covalently linked onto carboxylic groups of MWCNTs on the electrode. The hybridization events were monitored by differential pulse voltammetry (DPV) measurement of the intercalated daunomycin. Due to the ability of carbon nanotubes to promote electron-transfer reactions, the high catalytic activities of platinum nanoparticles for chemical reactions, the sensitivity of presented electrochemical DNA biosensors was remarkably improved. The detection limit of the method for target DNA was 1.0 × 10⁻¹¹ mol l⁻¹.     

Synthesis of multi-walled carbon nanotubes catalyzed by substituted ferrocenes

A range of substituted ferrocenes were used as catalysts for the synthesis of multi-walled carbon nanotubes (MWCNTs) and carbon fibers (CFs). These products were obtained in the temperature range 800-1000 °C, in a reducing atmosphere of 5% H₂ by pyrolysis of (CpR)(CpR′)Fe (R and R′ = H, Me, Et and COMe) in toluene solution. The effect of pyrolysis temperature (800-1000 °C), catalyst concentration (5 and 10 wt.% in toluene) and solution injection rate (0.2 and 0.8 ml/min) on the type and yield of carbonaceous product synthesized was investigated. Carbonaceous products formed include graphite film (mostly at high temperature; 900-1000 °C), carbon nanotubes and carbon fibers. The carbonaceous materials were characterized by scanning electron microscopy (SEM), transmission electron microscopy (TEM) and Raman spectroscopy. The ferrocene ring substituents influenced both the CNT diameter and the carbon product formed.     

Nitrogen-doped carbon nanotubes: growth, mechanism and structure

Nitrogen-doped bamboo-structured carbon nanotubes have been successfully grown using a series of cobalt/molybdenum catalysts. The morphology and structure of the nanotubes were analysed by transmission electron microscopy and Raman spectroscopy. The level of nitrogen doping, as determined by X-ray photoelectron spectroscopy, was found to range between 0.5 to 2.5 at.%. The growth of bamboo-structured nanotubes in the presence of nitrogen, in preference to single-walled and multi-walled nanotubes, was due to the greater binding energy of nitrogen for cobalt in the catalyst compared to the binding strength of carbon to cobalt, as determined by density functional theory.     

Microwave plasma treated carbon nanotubes and their electrochemical biosensing application

A convenient microwave plasma treatment method with ammonia precursor was proposed to enhance the solubility of carbon nanotubes (CNTs). The SEM, XRD and FTIR spectra clearly demonstrated that the carbon skeleton structure of the resultant ammonia plasma-treated CNTs (ammonia PT-CNTs) was not destroyed and amine groups of different forms were successfully coupled to CNTs in the MWP treatment process. The ammonia PT-CNTs have excellent solubility in water and are insoluble in nonpolar tetrahydrofuran, and the cyclic voltammograms suggest that the enhanced wetting properties clearly favor faster electron transfer kinetics on the ammonia PT-CNT electrodes. By choosing glucose oxidase as a model enzyme, the application of the ammonia PT-CNTs in construction of biosensors was further investigated. Due to the biocompatibility and electron transfer capability of the ammonia PT-CNTs, the resultant GOD biosensor displayed a good sensing performance. The biosensor has a fast response of less than 10 s, and the response current linearly increases with the glucose concentration in the range of 1.2 × 10⁻⁴ to 7.5 × 10⁻³ M with a detection limit of 1.0 × 10⁻⁵ M.