Thermal degradation of poly(vinyl chloride)/poly(ethylene oxide) blends: Thermogravimetric analysis

Thermal stability of poly(vinyl chloride)/poly(ethylene oxide) (PVC/PEO) blends has been investigated by thermogravimetric analysis (TGA) in dynamic and isothermal heating regime. PVC/PEO blends were prepared by hot-melt extrusion (HME). According to TG analysis, PEO decomposes in one stage, while PVC and PVC/PEO blends in two degradation stages. In order to evaluate the effect of PEO content on the thermal stability of PVC/PEO blends, different criteria were used. It was found that thermal stability of PVC/PEO blends depends on the blend composition. The interactions of blends components with their degradation products were confirmed. By using multiple heating rate kinetics the activation energies of the PVC/PEO blends thermal degradation were calculated by isoconversional integral Flynn–Wall–Ozawa and differential Friedman method. According to dependence of activation energy on degree of conversion the complexity of degradation processes was determined.     

Thermal degradation of poly(vinyl chloride) synthesized with a titanocene catalyst

PVC was synthesized using a trichloroindenyltitanium-methylaluminoxane catalyst at room temperature, and its degradation was monitored along with a commercial sample at 160, 170 and 180 °C under air or nitrogen atmosphere. The process was followed by HCl evolution, yellowing index, colour formation and thermogravimetric analysis. The produced polymer had a lower molecular weight and higher surface area, compared with a commercial PVC, while ¹H NMR and T_g values show minimal differences between materials. The HCl evolution degradation studies indicate that produced PVC has a lower thermal resistance than commercial PVC, while TGA reveals the opposite behaviour. Yellowing index and colour evaluation give evidence that nitrogen atmosphere and high surface area in produced PVC allow the polyene growth, whereas low surface area and air atmosphere generate shorter polyenes and chromophoric species. Differences in degradation performance are thought to be due to chemical origin, inherent morphology and differences in instrumentation.     

Bicomponent aligned nanofibers of N-carboxyethylchitosan and poly(vinyl alcohol)

Bicomponent nanofibers of N-carboxyethylchitosan (CECh) and poly(vinyl alcohol) (PVA) were obtained by electrospinning of mixed aqueous solutions. The electrospinning of CECh-containing nanofibers was enabled by the ability of PVA to form an elastically deformable entanglement network based on hydrogen bonds. The average diameters of the bicomponent fibers were in the range 100-420 nm. Water-resistant nanofibrous mats were obtained by thermal crosslinking at 100 °C for 10 h. Nanofibrous materials with 1D-, 1D-transversery or 3D fiber alignment were obtained depending on the type of the collector used.     

Chemical modification of poly(vinyl chloride) by nucleophilic substitution

The reaction of poly(vinyl chloride) (PVC) in nucleophile (Nu)/ethylene glycol (EG) or Nu/N,N-dimethylformamide (DMF) solution was found to result in the substitution of Cl in PVC with Nu from solution, in addition to the straight elimination of HCl, both of which led to the dechlorination of PVC. Examined Nu⁻ were I⁻, SCN⁻, OH⁻, N₃⁻, and the phthalimide anion. For the Nu/EG solution, elimination was favoured over substitution for all Nu⁻. The ratio of substitution to dechlorination was notable, descending in the order OH⁻ > SCN⁻ = N₃⁻ > phthalimide anion > I⁻. For the Nu/DMF solution, the ratio of substitution to dechlorination was high, in the order SCN⁻ > N₃⁻ > I⁻ > phthalimide anion. In both cases, the orders of the ratios were similar to those of the nucleophilic reactivity constant, I⁻ > SCN⁻ > N₃⁻ > phthalimide anion, except for I⁻. The low ratio for I⁻ was attributable to the elimination of HI after the substitution of Cl in PVC with I in solution, because I⁻ is a strong nucleophile, as well as an excellent leaving group. Comparing the effect of EG and DMF on the substitution of Cl in PVC with Nu in solution, the ratio of substitution to dechlorination was higher for I⁻, SCN⁻, N₃⁻, and the phthalimide anion in DMF than in EG. The substitution of Cl in PVC with Nu in solution was found to occur preferentially in DMF versus EG.     

Aging and thermal degradation of poly(N-methylaniline)

The conductivity aging and thermal stability of poly(N-methylaniline) are reported. Poly(N-methylaniline) doped with chloride ion was electrochemically synthesized. The conductivity data obtained in the temperature range between 118 and 483 K are analysed by Arrhenius and Mott models to elucidate the conduction mechanism. The thermal degradation of both doped and dedoped samples of poly(N-methylaniline) in air and nitrogen atmosphere has been followed using thermogravimetric and differential thermal analysis techniques. The polymer is heat-aged at various temperatures and the aged samples are analysed by FT-IR, SEM and XRD. The thermogravimetric data are further analysed by three different methods: Horowitz and Metzger [Anal. Chem. 35 (1963) 1464], Coats and Redfern [Nature 201 (1964) 68], Chan et al. [Synth. Met. 31 (1989) 95] to evaluate the energy of activation. The applicability of the three methods for the evaluation of kinetic parameters is discussed.     

Catalytic photocarboxylation of 1,1-diphenylethylene with N,N,N′,N′-tetramethylbenzidine and carbon dioxide

Photocarboxylation of 1,1-diphenylethylene with N,N,N′,N′-tetramethylbenzidine (TMB) in MeCN under bubbling of CO₂ proceeded with high catalytic efficiency, giving 3,3-diphenylacrylic acid (DPA) and 3-hydroxy-3,3-diphenylpropionic acid (20). The turnover number (TON=(DPA+20)/TMB) reached 17. Similarly, 1-phenyl-1-cyclohexene yielded cis-2-acetamido-2-phenylcyclohexanecarboxylic acid with TON 5.9. As compared with related N,N-dimethylaniline derivatives, TMB is more resistant to photodecomposition, has the much larger absorbance in the S₀→S₁ transition, and has the lower quenching efficiency by CO₂. Probably these factors are partly responsible for the high TON observed for TMB.     

Complexation between poly(N,N-diethylacrylamide) and poly(acrylic acid) in aqueous solution

The complexation between poly(N,N-diethylacrylamide) (PDEA) and poly(acrylic acid) (PAA) in aqueous solution was studied by viscometric, potentiometric, and fluorescence techniques. It was found that an interpolymer complex formed between the two polymers through hydrogen bonding interactions with the stoichiometry of r=0.6 (r is unit molar ratio of PAA/PDEA), and the complex formation show the dependence on pH values. The phase behaviour studies showed that the lower critical solution temperature of the PDEA-PAA aqueous solution gradually increased with the increasing of r from 0.01 to 0.15, until a soluble system in the whole temperature region was obtained, which remained in the range of r=0.15-0.3. At higher PAA concentrations, when r is above 0.3, the system appeared phase separation, and almost no temperature dependence was observed. Based on these conclusion and structure characteristics of PDEA and PAA, a model containing only short sequences of monomer residues was proposed for the structure of PDEA-PAA complex.     

PVB存在下PVC化学法脱氯化氢的研究

ＰＶＢ存在下ＰＶＣ化学法脱氯化氢的研究刘恒＊李大成陈朝珍（四川联合大学化工学院成都６１００６５）关键词聚氯乙烯，脱氯化氢，聚乙烯醇缩丁醛１９９６－０９－０８收稿，１９９７－０５－２６修回国家教育委员会留学归国人员资助费资助课题近年来在ＰＶＣ脱氯化氢制...     

Mathematical models of the initial stage of the thermal degradation of poly(vinyl chloride). II. The thermal degradation of poly(vinyl chloride) with effective removal of HCl

The dehydrochlorination of different samples of PVC under vacuum with continuous removal of HCl by freezing, has been studied at 180–210°C. The comparison of the kinetic curves of the dehydrochlorination of various samples of PVC which were obtained by us and other investigators, with the theoretical curves for the thermal degradation of idealized PVC in the absence of HCl has been carried out. This had made it possible to evaluate the influence of unstable fragments present in the original polymer on the initial rate of PVC degradation quantitatively. It has been shown that the distinction between the stationary rates of the dehydrochlorination of various samples of PVC is determined by the difference of the values of the average length of dehydrochlorination chain, l_av. The most probable interval of the values of l_av has been ascertained to be 4–12. It is established that the most probable value of the constant of the rate of dehydrochlorination of normal links of PVC, k₀, is 2.1 × 10^?7?2.5 × 10^?7 s^?1 at 200°C. © 1993 John Wiley & Sons, Inc.     

Influence of N,N,N′,N′-tetraalkyl terephthalamide on isothermal crystallization kinetics and morphology evolution of polypropylene

The influence of N,N,N′,N′-tetraalkyl terephthalamide (TATA) on the isothermal crystallization kinetics of polypropylene (PP) was studied using differential scanning calorimetry (DSC). It was found that TATA shows a heterogeneous nucleation effect and leads to the formation of β-PP. TATA can not only shorten the crystallization time but also heighten the crystallization temperature of PP. The crystallization rate constant of PP containing TATA is larger than that of pure PP. The evolution of crystalline morphology of PP was investigated on a polarized optical microscopy (POM) equipped with a hot stage and the results showed that the introduction of TATA into PP can quicken the crystallization of PP, which is consistent with DSC results. TATA also leads to a substantial decrease in the spherulite size of PP and the boundaries of spherulites are hardly distinguished.     

Thermal degradation of [poly(N-vinylimidazole)-polyacrylic acid] interpolymer complexes

Interpolymer complexes of a slightly basic polymer, poly(N-vinylimidazole) (PVIm) with a strongly acidic polymer, poly(acrylic acid) (PAA) have been prepared by mixing aqueous solutions of the respective components. Spectroscopy and thermal methods were used to reveal interaction between VIm and AA moieties. FT-IR analysis showed that the nitrogen atoms at 3rd position of imidazole ring are involved in strong H-bonding with acid groups of PAA leading to a uniform and fully miscible complex structure. As the quantity of PAA increases the thermal stability of complex increases based on TG results. In the DSC analyses, the single T_g for all IPC samples showed that IPCs have good or definite miscibility over the whole range of composition as a result of H-bond formation between acrylic acid and imidazole units.     

Thermal and mechanical behaviour of flexible poly(vinyl chloride) mixed with some saturated polyesters

Four saturated polyesters poly(hexamethylene adipate), poly(ethylene adipate), poly(hexamethylene terephthalate) and poly(ethylene terephthalate) were prepared. The resulting materials were characterized by IR and ¹H NMR, end group analysis and gel permeation chromatography. The effect of blending these polyesters (5 and 10%) with poly(vinyl chloride) (PVC) in the melt was investigated in terms of changes in the thermal behaviour of PVC by studying the weight loss after 50 min at 180 °C, colour changes of the blend before and after aging for one week at 90 °C, the variation in glass transition temperature and the initial decomposition temperature. The results gave proof for the stabilizing role played by the investigated polyesters against the thermal degradation of PVC. The best results are obtained when PVC is mixed with 5% aliphatic polyesters rather than with aromatic ones. This is well illustrated not only from the increase in the initial decomposition temperature (IDT), but also from the decrease of % weight loss and from the lower extent of discolouration of PVC, which is a demand for the application of the polymer. It was also found that blending PVC with 5% of the four investigated polyesters before and after aging for one week at 90 °C gave better mechanical properties even than that of the unaged PVC blank.     

N,N′,N″-Tri-Boc-guanidine (TBG): a common starting material for both N-alkyl guanidines and amidinoureas

In this Letter, we describe the unexpected reaction pattern of N,N′N″-tri-Boc-guanidine (TBG) with amines at room temperature and under reflux conditions affording N-substituted guanidines and amidinoureas, potentially important compounds with extensive applications in medicinal chemistry. This investigation shows that TBG is an excellent, readily available common starting material for the synthesis of various N-alkyl guanidines as well as N-alkyl-N′-substituted amidinoureas by simply manipulating the reaction conditions.     

On the dehydrogenation of N,N′-substituted p-phenylenediamine antioxidants. I. N-Phenyl-N′-isopropyl-p-phenylenediamine (IPPD)

Using B3LYP/6-31G^∗ treatment, the optimal geometries, electronic structures and IR spectra of N-phenyl-N′-isopropyl-p-phenylenediamine antioxidant (IPPD) and its doubly dehydrogenated oxidation products have been obtained. Experimental IR spectra of IPPD sample heated in air at 140 °C correspond to the doubly dehydrogenated IPPD structure with the Phenyl-NC double bond and not to its N,N′-dehydrogenated quinonediimine-type counterpart as supposed in the literature. This finding supports the idea of preferential dehydrogenation at N-bonded tertiary carbon atom in comparison with the amine nitrogen bonded to two phenyl rings.     

Synthesis,spectral characterization of the zinc(II) mixed-ligand complexes of N(4)-allyl thiosemicarbazones and N,N,N′,N′-tetramethylethylenediamine,and crystal structure of the novel [ZnL2(tmen)] compound

Mixed-ligand zinc complexes with N,N,N′,N′-tetramethylethylenediamine (tmen) and R-salicylaldehyde N(4)-allyl thiosemicarbazones (R: 3-OCH₃ (L₁), 5-Br(L₂)), [ZnL_1,2(tmen)], were synthesized and the complexes were characterized by elemental analysis, atomic absorption spectrometer, magnetic susceptibility, molar conductivity, electrospray ionization (ESI) and atmospheric pressure chemical ionization (APCI) mass spectra and IR, UV–Vis, ¹H NMR and ¹⁵N spectroscopies. Crystal of [ZnL₂(tmen)] have a slightly distorted square pyramid involving O, N, S atoms of thiosemicarbazone and one N atom of tmen in basal plane and the other N atom of tmen in apex of the pyramid. The non-coordinated allyl group is disordered.     

Thermal stability and thermal aging of poly(vinyl chloride)/MgAl layered double hydroxides composites

MgAl-LDH(layered double hydroxides) were prepared with CO(NH_2)_2, NH_4 Cl and NH_3·H_2O by the coprecipitation method, respectively. Corresponding composite membranes were prepared by the coating method. LDHs were characterized by WAXS, CO_2-TPD and SEM. The morphology of the PVC/LDHs composite membranes were characterized by means of SEM. The thermal stability of the membranes was analyzed by air aging box and TGA-FTIR. The SEM results show that nano-particles can be compatible with poly(vinyl chloride)(PVC) matrix homogeneously by the stirring-ultrasound blend method with two steps. Furthermore, the air aging box results proved that MgAl-CO(NH_2)_2-LDH has the best effect on thermal stability of PVC. TGA-FTIR results show that MgAl-CO(NH_2)_2-LDH could adsorb more HCl that resulted from the degradation of PVC and improve the pyrolysis temperature of the first degradation stage by 15 K compared with PVC.     

Chiral N,N′-dioxide-Yb(III) complexes catalyzed enantioselective hydrophosphonylation of aldehydes

Chiral N,N′-dioxide-Ytterbium(III) complexes promoted the asymmetric addition of diethyl phosphate to aldehydes, giving the corresponding products with good yields and enantioselectivities. The addition of pyridine favored both reactivity and enantioselectivity. A possible catalytic cycle was proposed to explain the mechanism of the asymmetric hydrophosphonylation of aldehydes.     

Application of high resolution thermogravimetry to the study of thermal stability of poly(vinyl chloride) resins

The influence of microstructure on thermal degradation behaviour was studied in five samples of pure poly(vinyl chloride) (PVC) obtained at different polymerisation temperatures. Tacticity of the samples was characterized by Fourier transform infrared spectroscopy (FTIR), and their thermogravimetric behaviour was measured by high resolution (Hi-Res™) TGA. This technique is able to detect two independent weight loss steps in the dehydrochlorination. The relative contribution of these two steps responds to different syndiotacticity tendency of PVC samples, in accordance with FTIR results.     

Radiation effects on the thermal degradation of poly(vinyl chloride) and poly(vinyl alcohol)

Radiation effects on the formation of conjugated double bonds in the thermal degradation of poly(vinyl chloride) (PVC) and poly(vinyl alcohol) (PVA) were investigated. Thin films of PVC and PVA were either irradiated with γ-rays at ambient temperature (pre-irradiation) and then subjected to thermal treatment, or irradiated at elevated temperatures (in situ irradiation). An extensive enhancement of the thermal degradation was observed for the pre-irradiation of the PVC films, which was more effective than the effect of the in situ irradiation at the same absorption dose. For the PVA degradation, however, the effect of the in situ irradiation was larger than that of the pre-irradiation. The results were explained and related mechanisms were discussed based on radiation-induced chemical reactions and their individual contributions to the thermal degradation behaviors of the two polymers. © 1998 John Wiley & Sons, Inc. J Polym Sci A: Polym Chem 36: 3089–3095, 1998     

Thermal stability, smoke emission and mechanical properties of poly(vinyl chloride)/hydrotalcite nanocomposites

Poly(vinyl chloride)/hydrotalcite (PVC/HT) nanocomposites were prepared through vinyl chloride suspension polymerization in the presence of HT nanoparticles surface modified with alkyl phosphate (AP). The thermal stability, smoke emission and mechanical properties of PVC/HT nanocomposites were investigated. It was found that AP molecules were effectively absorbed by HT particles with no intercalation into the interlayer of HT. The dispersion morphologies of PVC/HT nanocomposites were observed by transmission electron microscopy showing that the majority of HT particles were dispersed in the PVC matrix in the nanoscale. The Congo Red measurement and thermogravimetric analysis showed that the thermal stability time, and the temperatures at 10% weight loss and at the maximum weight loss rate of PVC resins increased as the weight fraction of HT in the composite resins increased. The well-dispersed nano-sized HT showed an obvious smoke suppression effect on PVC. The maximum smoke density decreased about 1/3 and 1/2 when 2.5 wt% and 5.3 wt% nano-sized HT were incorporated into PVC, respectively. Furthermore, PVC/HT nanocomposites exhibited greater tensile strength and impact strength than the pristine PVC.