界面缩聚法制备间苯二甲酰双酚酸酯聚芳酯

以四丁基氯化铵为相转移催化剂,双酚酸甲酯或双酚酸乙酯与间苯二甲酰氯界面缩聚,合成得到了侧链含酯基的聚芳酯.在吡啶、三乙胺、碳酸氢钠、氢氧化钠中选择合适的催化剂,既可以发生聚合反应又不会使双酚酸酯的酯基发生水解.聚合反应在7种溶剂中进行,通过探讨聚合反应机理以解释溶剂对聚合反应产率以及聚合物特性黏数的影响.以二氯甲烷为溶剂,在优化的聚合条件下较高产率地得到了高特性黏数的聚合物.DSC及TGA分析表明,间苯二甲酰双酚酸酯类聚芳酯具有比间苯二甲酰双酚酸好的热稳定性,热分解温度可从200℃提高到300℃.     

Thermal decomposition and stability of fatty acid methyl esters in supercritical methanol

In recent years, non-catalytic supercritical processes for biodiesel production have been proposed as alternative environmentally friendly technologies. However, conditions of high temperature and pressure that occur while biodiesel is in supercritical fluid can cause fuel degradation, resulting in low yield. In this study, we performed the thermal decomposition of fatty acid methyl esters (FAMEs) in supercritical methanol at temperatures ranging from 325 °C to 420 °C and pressure of 23 MPa to investigate the degradation characteristics and thermal stability of biodiesel. The primary reactions we observed were isomerization, hydrogenation, and pyrolysis of FAMEs. The main pathway of degradation was deduced by analyzing the contents of degradation products. We found that if FAME has shorter chain length or is more saturated, it has higher thermal stability in supercritical methanol. All FAMEs remained stable at 325 °C or below. Based on these results, we recommend that transesterification reactions in supercritical methanol should be carried out below 325 °C (at 23 MPa) and 20 min, the temperature at which thermal decomposition of FAMEs begins to occur, to optimize high-yield biodiesel production.     

Synthesis and properties of new fluorinated polyarylates derived from 1,1-bis(4-hydroxyphenyl)-1-phenyl-2,2,2-trifluoroethane and aromatic diacid chlorides

A new series of fluorine-containing polyarylates were synthesized by interfacial or high-temperature solution polymerization of 1,1-bis(4-hydroxyphenyl)-1-phenyl-2,2,2-trifluoroethane with six aromatic diacyl chlorides. These polyarylates had inherent viscosities ranging from 0.47 to 1.37 dl/g that corresponded to weight-average and number-average molecular weights (by gel permeation chromatography) of 35,800-72,400 and 30,700-67,700, respectively. All polymers were highly soluble in a variety of solvents, and could afford tough, transparent, and colorless films via solution casting. The glass-transition temperatures of the polymers ranged from 209 to 271 °C. All of them did not show significant decomposition below 450 °C in both nitrogen and air atmospheres.     

Catalytic synthesis of diphenolic acid from levulinic acid over cesium partly substituted Wells–Dawson type heteropolyacid

A series of insoluble cesium partly substituted Wells–Dawson type heteropolyacids, Cs_xH_6−xP₂W₁₈O₆₂ (x = 1.5–6.0), were synthesized and characterized using the techniques including UV–vis/DRS, FT-IR, XRD, XPS, and N₂ porosimetry. As the unique and reusable solid acid catalysts, Cs_xH_6−xP₂W₁₈O₆₂ salts were applied to produce diphenolic acid by the condensation reaction of phenol with bio-platform molecule, levulinic acid. For comparison, cesium partly substituted Keggin type heteropolyacids (Cs_xH_3−xPW₁₂O₄₀, x = 1.0–3.0), HCl, HZSM-5, and MCM-49 were also tested. Influences on the catalytic activity and selectivity were considered for factors including solvent, molar ratio of phenol to levulinic acid, amount of catalyst, reaction temperature, stirring speed, and reaction time. The experimental results demonstrated that both Cs_1.5H_4.5P₂W₁₈O₆₂and Cs_2.5H_0.5PW₁₂O₄₀ exhibited excellent catalytic performance under solvent-free conditions. Furthermore, both selectivity and activity of Cs_1.5H_4.5P₂W₁₈O₆₂ were higher than those of Cs_2.5H_0.5PW₁₂O₄₀. Reasons for the different catalytic behaviors between two types of cesium partly substituted heteropolyacids were investigated.     

Thermal reactions of guaiacol and syringol as lignin model aromatic nuclei

Thermal reactions of guaiacol (2-methoxyphenol) and syringol (2,6-dimethoxyphenol) were compared in a closed ampoule reactor (N₂/400-600 °C/40-600 s) to obtain information on the thermal reactivities of lignin aromatic nuclei, guaiacyl and syringyl types. For both compounds, the O-CH₃ bond homolysis, which was observed at >400 °C, initiated their decomposition. This homolysis was followed by several temperature-dependent reactions; radical-induced rearrangement to convert the aromatic OCH₃ to aromatic CH₃ structures and condensation into high molecular weight (MW) products were the next steps (≈400 °C); then, coke formation became extensive (≈450 °C); effective gas formation required higher temperature such as >550-600 °C. The syringol- and guaiacol-characteristic GC/MS-detectable low MW products were explained with the above mentioned reactions. As for the difference between guaiacol and syringol, coke and gas (especially CH₄ and CO₂) formation was more extensive in syringol. This effective coking can be explained by the influence of the additional OCH₃ group in syringol, which doubles the opportunity for coke formation. This, in turn, reduces the yields of GC/MS-detectable low MW products. Demethoxylation to form guaiacol was also observed in syringol, even though the reactivity was not so high. These reactions are discussed at the molecular level.     

A novel route for synthesizing esters and polyesters from the Diels-Alder adduct of levopimaric acid and acrylic acid

A novel route for the esterification of the Diels-Alder adduct between abietic acid, in its isomer form of levopimaric acid, and acrylic acid was established. The high purity Diels-Alder adduct was prepared starting from rosin acids. When the adduct was subjected to a condensation reaction in the presence of a cyclic carbonate ester and of an efficient amine catalyst, hydroxyalkyl esters were obtained. The corresponding linear polyesters were synthesized by the advanced polycondensation of the above intermediates at high temperature, under vacuum, and in the presence of some adequate polyesterification catalysts. In the work 1,3-dioxolan-2-one as cyclic carbonate ester, triethylamine as esterification catalyst, and toluene-4-sulfonic acid monohydrate or tetrabutyl titanate as polycondensation catalysts, were preferred for exemplifications. The polyesters were soluble in dimethylacetamide, trichloromethane, tetrahydrofuran, 1,1,2,2-tetrachloroethane, or 1,4-dioxane. The thermal and electric studies showed that the polymers were substances with good thermal stability and high dielectric properties.     

The effect of bridge group on the thermal stability of nitro-substituted aromatic polyamides

The effect of introducing a bridge group into the diamine moiety on the thermal stability of aromatic polyamides substituted with a nitro group in the diamine ring at the ortho position to the amide group was studied. Our present work showed that the bridge group, whether it was electron withdrawing or releasing, did not have a significant effect on the activity of the nitro group for the intramolecular cyclization reaction to poly(benzoxazole)s.     

Thermal stability of poly(N-vinyl-2-pyrrolidone-co-methacrylic acid) copolymers in inert atmosphere

The thermal stability of poly(N-vinyl-2-pyrrolidone-co-methacrylic acid) copolymers was studied by thermogravimetry and infrared spectroscopy in inert atmosphere. The thermogravimetric curves suggested that the effective degradation of both systems occurred in the temperature range 350–500 °C with more than 60% mass loss. At this temperature, the activation energy was in the range 160–200 kJ mol⁻¹ (average values), suggesting that the degradation occurred by a random scission of the chain. The FTIR results indicated that the main volatile products of degradation are CO₂, CO and hydrocarbons (unsaturated structures) with low molecular weight. Pure PVP also showed the formation of NH₃ which was apparently suppressed in the copolymer by the formation of large amounts of CO₂ and CO. The results suggested that the thermal stability of the copolymers was essentially associated with the N-vinyl-2-pyrrolidone monomer, losing stability when the percentage of methacrylic acid in the copolymer system was increased.     

Synthesis and degradabilities of polyesters from 1,4:3,6-dianhydrohexitols and aliphatic dicarboxylic acids

Six different polyesters ( 6a–6c and 7a–7c ) were prepared by the bulk polycondensations of the respective combinations of 1,4:3,6-dianhydro-D-glucitol ( 3 ) and 1,4:3,6-dianhydro-D-mannitol ( 4 ) with succinyl dichloride ( 5a ), glutaryl dichloride ( 5b ), and adipoyl dichloride ( 5c ) at 140–180°C. Polyesters having number average molecular weights up to 2.6 ×10⁴ were obtained in high yields. Only polyester 7a based on 4 and 5a was partially crystalline, whereas all the other polyesters were amorphous. Thin films of these polyesters except that of 7a were spontancously hydrolyzed in a neutral phosphate buffer solution at 50°C, whereas they were reluctant to be hydrolyzed at 27°C. The polyesters were more or less degraded at 27°C by treatment with an activated sludge or by prolonged burial in soil. © 1995 John Wiley & Sons, Inc.     

Thermal stability of solid and aqueous solutions of humic acid

The effects of temperature on the stability of a soil humic acid were studied in the present work. Solid samples of Gohy-573 humic acid (HA) and dissolved ones in aqueous solution (pH 6.0, 0.1 mol L⁻¹ NaClO₄) were investigated in order to understand the impact of temperature on the chemical properties of the material. The methods applied to solid samples in the present investigation were thermogravimetric analysis (TGA), temperature-programmed desorption coupled with mass spectrometry (TPD-MS), and in situ diffuse reflectance infrared Fourier transformed spectroscopy (in situ DRIFTS). Humic acid samples were studied in the 25-800 °C range, with focus on thermal/chemical processes up to 250 °C. The reversibility of the changes observed was investigated by cyclic changes to specified temperature ranges (40-110 °C). All measurements were conducted under inert-gas atmosphere in order to avoid samples combustion at increased temperatures. Aqueous solutions were analyzed by UV-vis absorption spectroscopy after storage at temperatures up to 95 °C, and storage times up to 1 week. For temperatures below 100 °C experiments on solid and aqueous samples have shown results which were consistent to each other. The amount of water desorbed is temperature dependent and up to 70 °C this process was totally reversible. Above 70 °C an irreversible loss of water was also observed, which according to UV-vis spectroscopy corresponds to water produced by condensation leading to more condensed polyaromatic structures. The water released up to 110 °C was about 7 wt% of the total mass of the dried humic acid, where less than 50% corresponded to reversibly adsorbed water. At higher temperatures (>110 °C), gradual decomposition resulting in the formation of carbon dioxide (110-240 °C), and carbon monoxide (140-240 °C) takes place. Hence, thermal treatment of Gohy-573 humic acid above 70 °C results in irreversible structural changes, that could affect chemical properties (e.g., complex formation) of the material.     

Synthesis of reactive aromatic polyesters having pendant chlorohydrin moieties

A monomer containing a chlorohydrin moiety, propyl chlorohydrin diphenolate (PCHDP), was synthesized. Reactive polyesters having these pendant chlorohydrin moieties were prepared by the interfacial polycondensation of isophthaloyl chloride with PCHDP or with PCHDP and diphenolic acid using phase transfer catalyst. The molar ratio of reactants and the phase ratio of water to organic solvent strongly affect the molecular weight of resulting polymers and polymers with high molecular weight are obtained at the molar ratio of 1.0–1.15 and the phase ratio of 2.0–3.5. Swelling of the growing polymers is dependent on the molar ratio of the reactants and the phase ratio because of the hydrophilic and hydrophobic nature of the pendant chlorhydrin moiety. The resulting polymers are not soluble in any solvent except water in which hydrolysis occurs. Thus so, the structure of polymers was confirmed by ¹³C CP/MAS NMR. © 1996 John Wiley & Sons, Inc.     

Thermal stability and degradation behavior of novel wholly aromatic azopolyamide-hydrazides

Thermal stability and degradation behavior of a series of novel wholly aromatic polyamide-hydrazides containing azo groups in their main chains have been investigated in nitrogen and in air atmospheres using differential scanning calorimetry (DSC), thermogravimetry (TG), infrared spectroscopy (IR) and elemental analysis. The influences of controlled structural variations and molecular weight on the thermal stability and degradation behavior of this series of polymers have also been studied. The structural differences were achieved by varying the content of para- and meta-substituted phenylene rings incorporated within this series. Azopolyamide-hydrazides having different molecular weights of all para-substituted phenylene type units were also examined. The polymers were prepared by a low temperature solution polycondensation reaction of p-aminosalicylic acid hydrazide [PASH] and an equimolar amount of 4,4′-azodibenzoyl chloride [4,4′ADBC] or 3,3′-azodibenzoyl chloride [3,3′ADBC] or mixtures of various molar ratios of 4,4′ADBC and 3,3′ADBC in anhydrous N,N-dimethyl acetamide [DMAc] containing lithium chloride as a solvent at −10 °C. All the polymers have the same structural formula except the mode of linking phenylene units in the polymer chain. The results clearly reveal that these polymers are characterized by high thermal stability. Their weight loss occurred in three distinctive steps. The first was small and assigned to the evaporation of absorbed moisture. The second was appreciable and was attributed to the cyclodehydration reaction of the hydrazide groups into 1,3,4-oxadiazole rings by losing water, combined with elimination of azo groups by losing molecular nitrogen. This is not a true degradation but rather a thermo-chemical transformation reaction of the azopolyamide-hydrazides into the corresponding polyamide-1,3,4-oxadiazoles. The third was relatively severe and sharp, particularly in air, and corresponded to the decomposition of the resulting polyamide-1,3,4-oxadizoles. In both degradation atmospheres, the improved resistance to high temperatures was always associated with increased content of para-phenylene moieties of the investigated polymer. The better thermal stability of the wholly para-oriented type of polymer relative to the other polymers is attributed to its greater chain symmetry which is responsible for its greater close packing, rod-like structure and consequently stronger intermolecular bonds which would be more difficult to break and therefore more resistance to high temperatures. Further, with exception of 160-200 °C temperature range, where the lower molecular weight samples showed considerable weight losses which were most probably due to hydrogen bonded DMAc, all the wholly para-oriented phenylene type of polymer samples behaved similarly regardless of their respective molecular weight. This seems to indicate that the structural building units responsible for high thermal stability of the polymers are their characteristic groups, such as aromatic moieties, amide and hydrazide linkages in case of azopolyamide-hydrazides, and 1,3,4-oxadiazole rings, aromatic nuclei and amide linking bonds in case of polyamide-1,3,4-oxadiazoles, rather than the longer chain segments.     

Synthesis and characterization of polyesters derived from sebacic acid,hexanediol, and hydroquinone

Oils and fats derived from animals and plants provide a good renewable source for polymer precursors. In this investigation, fatty acids derived from plant oils and diols were used as monomers to produce polyesters by melt polycondensation. Sebacic acid, hexanediol, and hydroquinone were used as precursors in the polymer synthesis. The polymers were characterized by gel permeation chromatography, Fourier transform infrared spectroscopy, three-bending point flexural test, X-ray diffraction, tensile testing, and contact angle. The resulting polyesters were blended with epoxies to create materials with an increased elongation at break without affecting other mechanical properties.     

Synthesis and characterization of elastic aliphatic polyesters from sebacic acid, glycol and glycerol

A series of biodegradable polyesters have been prepared from sebacic acid (SA), glycol (Go) and glycerol (Ge) through a two-step process. First the linear prepolymers were prepared from SA and Go, then crosslinked polyesters were obtained from the prepolymer and Ge with different molar ratios. The resulting samples were characterized by Fourier Transform Infrared Spectrum (FTIR), X-ray Photoelectron Spectroscopy (XPS), and Differential Scanning Calorimetry (DSC). Dynamic Contact Angle tests (DCA) and mechanical tests were also investigated. The enzymatic degradation studies were performed at 37 °C in phosphate buffer solution with porcine pancreas lipase. The resultant polyesters were transparent, flexible, insoluble in organic solvents, and the surfaces of the polyesters were hydrophilic. Young’s modulus, tensile strength, glass transition temperature (T_g) and the degree of enzymatic degradation increased with increasing the content of Ge. It was also worth noticing that the surface content of -COOC- groups was a key factor in the enzymatic degradability.     

Thermal stability of some aromatic polyesters and poly(ester carbonates)

The thermal stability of some hydroxyl-terminated poly(bisphenol A tere- or isophthalates) and their corresponding poly(ester carbonates) made by subsequent coupling with phosgene has been investigated by thermogravimetry. Samples have been studied in nitrogen or air using constant rates of temperature rise or isothermal conditions.The isophthalate-containing polyesters are more thermo-oxidatively stable than their terephthalate analogues and molecular weight has a significant effect on stability. In contrast, there is little difference in the thermal stability of the poly (isophthalate carbonates) and the poly(terephthalate carbonates) and the stability of the latter is relatively independent of the ratio of the diester to carbonate group content. The stability of the poly(terephthalate carbonates) is also relatively insensitive to end-group modifications.     

Studies on the reactions of fluoroalkanesulfonyl azide with aromatic compounds

The thermal decomposition reactions of fluoroalkanesulfonyl azides R_fSO₂N₃ (1) in the presence of various substituted benzene X_nC₆H_6−n [X: CH₃ (n=1, 2, 4, 6), OCH₃ (n=1, 2), C₆H₅CH₂ (n=1), F, Cl, Br] were studied in detail. The N-aryl fluoroalkanesulfonyl amides [R_fSO₂NHC₆H_5−nX_n] were produced as the major products. The ortho/para ratio resembled that of an electrophilic aromatic substituted reaction. An ionic π- or σ-complex was postulated as the intermediate for these reactions.     

Thermal stability of magnesium-rich primers based on glycidyl carbamate resins

Coatings of outstanding thermal stability were obtained by the combination of two novel technologies, that of a magnesium-rich primer and a silane-modified glycidyl carbamate binder. While conducting a study to evaluate the new binder system with respect to properties of the magnesium-rich primer, during thermogravimetric analysis of samples, previously unobserved and unexpected properties were noted. The samples transformed into an intact solid residue, with the amount of the residual char ranging between 40 and 90% weight depending on the pigment volume concentration (PVC) of the magnesium particles in the composition. It appears that the hitherto unobserved property is essentially a function of the metallic pigment particles in the coating. The discovery of the exceptional thermal stability potentially increases the range of application for these primers and these can be further developed for use as a thermal barrier coating.     

直链烷烃的超临界热稳定性研究

本文考察了正辛烷、正壬烷、正癸烷、正十一烷和正十二烷等5种直链烷烃在超临界条件下的恒容热裂解,采用一级反应动力学简化描述其热裂解过程。跟踪裂解气液产物分布,探讨了液体产物中芳烃含量与热稳定性的关系。在相同反应条件下,奇数碳和偶数碳烷烃热裂解速率、转化率和液体组分中芳烃含量分别随碳数的增加而增加。芳烃产物含量随裂解转化率增加呈指数形式增加,表达了烷烃类化合物热稳定性和裂解变化的规律。     

Synthesis and properties of new polyesters having tetrahydrofuran rings in their main chains

New polyesters 6a–6c consisting of 2,4-linked tetrahydrofuran rings were synthesized by bulk polycondensation of methyl trans- and cis-4-hydroxytetrahydrofuran-2-carboxylates ( 5a and 5b ) and a stereoisomeric mixture of methyl 4-hydroxy-5-methyltetrahydrofuran-2-carboxylate ( 5c ) at high temperature. These monomers were prepared from methyl glycolate or methyl lactate and diethyl maleate through a four-step reaction sequence. The polycondensation was carried out without solvent at different temperatures ranging from 150 to 220°C. Titanium isopropoxide was most effective among the catalysts examined, giving polyesters with number-average molecular weights up to 2 × 10⁴. Polyester 6a consisting of trans-2,4-linked tetrahydrofuran rings was soluble in trifluoroacetic acid and a mixed solvent of chloroform and methanol (10/1, v/v). Polyester 6b composed of cis-2,4-linked tetrahydrofuran rings was soluble in dimethyl sulfoxide and dimethylformamide in addition to the two solvents for 6a . Polyester 6c with 5-methyl-substituted tetrahydrofuran rings was composed of a mixture of stereoisomeric units and thus was soluble in a variety of solvents including chloroform, tetrahydrofuran, acetonitrile, dimethyl sulfoxide, and dimethylformamide. The glass transition temperatures of 6a, 6b , and 6c determined by DSC were 109, 88, and 66°C. These polyesters were found to be very slowly hydrolyzed in a neutral phosphate buffer solution at ambient temperature. © 1993 John Wiley & Sons, Inc.     

Effect of the thermal history on the phase transition and the liquid crystalline structure of thermotropic polyesters

A series of triad type thermotropic polyesters based on phenylsulfonyl hydroquinone and α,ω-bis(4-carboxyphenoxy)alkane was prepared, and the effect of the thermal history on the phase transition and the liquid crystalline structure of the polyesters was studied. The phase transition was significantly affected by the thermal history. When annealed at various temperatures, multiple endotherms were observed for all polyesters in DSC thermograms. A phase stability concept was employed to explain the complicated phase transitions. The time evolution of the liquid crystalline structure was investigated by optical microscopy and transmitted light intensity measurement under crossed polars during annealing. The steady decrease in the density of disclinations with accompanying increase of transmitted light intensity was observed. Depending on the surface conditions of the liquid crystal polymer film, two markedly different domain growth patterns and different textures were found on isothermal annealing; the continuous wormlike texture and the discontinuous droplet texture. The structural relaxation of the deformed texture during annealing was also studied. When shear was applied, the characteristic banded texture was formed in all polyesters.