Reducing Photoyellowing of Wool Using Nano TiO2

Wool is the most important animal fiber used in textile industries, but its photostability is very low. Scientists have searched for new ways to increase the photostability of wool. As TiO₂ nano particles have features suitable for new applications, the UV-blocking power of nano TiO₂ may be used for protecting fabrics against UV rays. Treatment of wool with TiO₂ can be effective for controlling photodegradation. This study focused on protecting wool fabric against UV rays using nano TiO₂. To this end, oxidized and raw wool were treated with citric acid as the cross-linking agent and different concentrations of nano TiO₂. The whiteness and yellowness of wool fabric samples were reported. XRD patterns proved the existence of TiO₂ nano-particles on the wool surface. Finally, the results revealed that nano TiO₂ is a suitable UV absorber on wool fabric and its effect depends on concentration.     

The photoyellowing of stilbene-derived fluorescent whitening agents--mass spectrometric characterization of yellow photoproducts.

The application of fluorescent whitening agents (FWAs) significantly accelerates the photoyellowing of wool and silk under exposure to the ultraviolet and visible components of sunlight <500 nm. The photochemistry involved in this process is poorly understood, particularly the role of photoproducts derived directly from the FWA itself. Hydroxylation was identified as the key initial mechanism of photodegradation leading to coloration of the solution in the irradiation of the stilbene-derived FWA 4,4'-bis(2-sulfostyryl)biphenyl (DSBP) in the presence of hydrogen peroxide (H2O2). Polyhydroxylated DSBP derivatives were implicated as critical intermediates in the formation of yellow photoproducts under these conditions. The formation of trace quantities of DSBP quinone derivatives subsequent to hydroxylation was identified as the key cause of DSBP photoyellowing. These results are the first successful characterization of yellow photoproducts resulting directly from irradiation of a stilbene-based FWA. Formation of these yellow stilbene-based FWA-derived photoproducts may occur on the surface of FWA-treated wool exposed to simulated sunlight, as previous work has shown that H2O2 is photogenerated when wet FWA-treated wool is exposed to light. These results therefore suggest that yellow FWA-derived photoproducts contribute to the accelerated photoyellowing of FWA-treated wool.     

Synthesis of TiO2 based on hydrothermal methods using elevated pressures and microwave conditions

Titanium dioxide (TiO₂), especially in its anatase form, is an effective photocatalyst under ultraviolet (UV) light. The particle size of TiO₂ is a critical factor to determine its photoactivity based on its quantum effectiveness under light irradiations. Thus, nanocrystalline TiO₂ has been widely accepted to significantly enhance this effect. The sol–gel method is generally used to synthesize the anatase form of nanocrystalline TiO₂. In this study, we expanded the synthesis method of TiO₂ to high pressures under direct heating (hydrothermal method) and indirect heating (microwave-assisted method). It was found that pH value is one of the major factors to control nano-sizes of TiO₂ particles, and the neutral condition in all methods is preferable for controlling the sizes of the prepared TiO₂ particles. The microwave-assisted method further improves quality of synthesized nano-size TiO₂ below 10 nm. These results have been confirmed by both the direct size measurement using TEM images and indirect determination using XRD peaks. The collected samples are further analyzed using UV–Vis spectroscopy to identify the particle size-dependent photoreactivity and to confirm the effectiveness of microwave-assisting under neutral conditions. DSC is also a powerful tool to identify the crystalline transition of TiO₂.     

The Photoyellowing of Stilbene-derived Fluorescent Whitening Agents—Mass Spectrometric Characterization of Yellow Photoproducts

The application of fluorescent whitening agents (FWAs) significantly accelerates the photoyellowing of wool and silk under exposure to the ultraviolet and visible components of sunlight <500 nm. The photochemistry involved in this process is poorly understood, particularly the role of photoproducts derived directly from the FWA itself. Hydroxylation was identified as the key initial mechanism of photodegradation leading to coloration of the solution in the irradiation of the stilbene-derived FWA 4,4'-bis(2-sulfostyryl)biphenyl (DSBP) in the presence of hydrogen peroxide (H₂O₂). Polyhydroxylated DSBP derivatives were implicated as critical intermediates in the formation of yellow photoproducts under these conditions. The formation of trace quantities of DSBP quinone derivatives subsequent to hydroxylation was identified as the key cause of DSBP photoyellowing. These results are the first successful characterization of yellow photoproducts resulting directly from irradiation of a stilbene-based FWA. Formation of these yellow stilbene-based FWA-derived photoproducts may occur on the surface of FWA-treated wool exposed to simulated sunlight, as previous work has shown that H₂O₂ is photogenerated when wet FWA-treated wool is exposed to light. These results therefore suggest that yellow FWA-derived photoproducts contribute to the accelerated photoyellowing of FWA-treated wool.     

Treatment of bleached wool with trans-glutaminases to enhance tensile strength, whiteness, and alkali resistance

Trans-glutaminases is known as a cross-linking enzyme for proteins. Wool is a proteinous fiber conventionally is treated through several processes to obtain the desirable characteristics. Bleaching is also one of the most important processes usually carried out by using an oxidizing agent in a conventional method. The tensile strength of wool yarns was reduced as a consequence of oxidative bleaching. Here, with the help of microbial trans-glutaminases (m-TGases), a novel bleaching process was disclosed in a way to obtain a bleached wool yarn with no significant reduction in the tensile strength. The results confirmed that the bleached wool yarns with H₂O₂ could be modified by m-TGases post-treatment. The m-TGases treatment on the bleached wool yarns improved the tensile strength and whiteness along with the higher alkali resistance.     

Preparation of nanocrystalline TiO2 thin film at low temperature and its application in dye-sensitized solar cell

The electrophoretic deposition combined with common pressure hydrothermal treatment was employed to prepare nanocrystalline TiO₂ thin film from suspension of tetra-n-butyl titanate and P25 at low temperature. The tetra-n-butyl titanate was hydrolyzed and crystallized into anatase to interconnect nanocrystalline TiO₂ particles and to stick them to a conductive substrate by common pressure hydrothermal treatment to improve the electron transport properties of the deposited thin film. A dye-sensitized solar cell based on TiO₂ thin film prepared by the low temperature method yielded the conversion efficiency of 6.12%. Due to the relative slower electron transport rate in the deposited film, its conversion efficiency was slightly lower than that of the cell with TiO₂ thin film prepared by the conventional high temperature sintering method. Since it is free of high temperature sintering step, this method can be used to prepare nanocrystalline TiO₂ thin film on plastic polymer conductive substrate for fabrication of flexible dye-sensitized solar cell.     

Comparison of low crystallinity TiO2 film with nanocrystalline anatase film for dye-sensitized solar cells

Dye adsorption and microstructure of TiO₂ film are important properties when it is used as photoelectrode of dye-sensitized solar cells (DSCs). This study investigated the application of a low crystallinity TiO₂ film in DSCs. The low crystallinity TiO₂ film is composed of interconnected spherical particles with an average size of 20 nm and has homogeneous mesoporous inner structure. A DSC based on the anatase nanocrystalline mesoporous film prepared by P25 was used for comparison purpose. It is shown that although loaded with much less dye, the DSC based on the low crystallinity TiO₂ film generated I_sc (short circuit photocurrent) as much as the one based on the conventional anatase nanocrystalline film does and obtained higher V_oc (open circuit photovoltage) as well as ff (fill factor). The overall light-to-electricity efficiency (η) of the DSC based on the low crystallinity TiO₂ film reached 5.37%, while the η of the DSC based on anatase nanocrystalline film was 4.69% in this work condition. It is suggested that a low crystallinity TiO₂ mesoporous film with a proper microstructure is as efficient as the anatase nanocrystalline mesoporous film when used in DSCs.     

Photocatalytic air-cleaning using TiO2 nanoparticles in porous silica substrate

For air-cleaning, TiO₂ photocatalysis represents one of the very efficient advanced oxidation processes (AOPs) that can decompose chemically and microbiologically stable volatile organic compounds (VOCs). However, the photocatalytic activity of nanocrystalline TiO₂ powders can be significantly suppressed due to TiO₂’s poor adsorption characteristics for organic compounds and its relatively low surface area. The present study sought to solve this problem by immobilising nanocrystalline TiO₂ in the porous silicate substrate. Two titania sources were used in an aqueous solution form: a suspension from a TiO₂ producer in Slovenia, Cinkarna Celje (CC-40) and a TiO₂ sol, prepared by a low-temperature synthesis developed at the University of Nova Gorica (TiO₂-UNG). Two different types of mesoporous silica were used: SBA-15 with an ordered hexagonal pore arrangement and KIL-2 with disordered inter-particle mesoporosity. The structural characteristics, adsorption properties and photocatalytic activity of catalysts deposited on aluminium plates as thin films were investigated. CC-40 exhibited higher adsorption and photocatalytic activity than TiO₂-UNG due to the greater quantity of Ti-OH groups on its surface. The addition of mesoporous silica led to higher adsorption and catalytic activity for both TiO₂ sources. SBA-15 was more efficient than KIL-2.     

Molecular Dyads Comprising Metalloporphyrin and Alkynylplatinum(II) Polypyridine Terminal Groups for Use as a Sensitizer in Dye‐Sensitized Solar Cells

A new class of molecular dyads comprising metalloporphyrin‐linked alkynylplatinum(II) polypyridine complexes with carboxylic acids as anchoring groups has been designed and synthesized. These complexes can sensitize nanocrystalline TiO₂ in dye‐sensitized solar cell (DSSC) studies. The photophysical, electrochemical, and luminescence properties of the complexes were studied and their excited‐state properties were investigated by nanosecond transient absorption spectroscopy, with the charge‐separated [Por^.??{(C?C)Pt(tBu₃tpy)}^.+] state observed upon excitation. Excited‐state redox potentials were determined; the electrochemical data supports the capability of the complexes to inject an electron into the conduction band of TiO₂. The complexes sensitize nanocrystalline TiO₂ and exhibited photovoltaic properties, as characterized by current–voltage measurements under illumination of air mass 1.5 G sunlight (100 mWcm^?2). A DSSC based on one of the complexes showed a short‐circuit photocurrent of 10.1 mAcm^?2, an open‐circuit voltage of 0.64 V, and a fill factor of 0.52, giving an overall power conversion efficiency of 3.4 %.     

Photosensitization of Nanocrystalline TiO2 Electrode Modified with C60 Carboxylic Acid Derivatives

C₆₀ carboxylic acid derivatives can be readily adsorbed on the surface of nanocrystalline TiO₂ film. The C₆₀ carboxylic acids adsorbed on nanocrystalline TiO₂ films act as charge‐transfer sensitizer. The electron transport from TiO₂ to the C₆₀ derivatives results in the generation of the cathodic photocurrent. The short‐circuit photocurrent of a C₆₀ tetracarboxylic acid is 0.45 μA/cm² under 464 nm light illumination. The photoelectric behaviour of ITO electrodes modified by the same C₆₀ carboxylic acids is different from that of the modified TiO₂ electrodes, and shows anodic photocurrent.     

Effect of the microstructure of the supported catalysts CuO/TiO<Subscript>2</Subscript> and CuO/(CeO<Subscript>2</Subscript>-TiO<Subscript>2</Subscript>) on their catalytic properties in carbon monoxide oxidation

The effect of the microstructure of titanium dioxide on the structure, thermal stability, and catalytic properties of supported CuO/TiO₂ and CuO/(CeO₂-TiO₂) catalysts in CO oxidation was studied. The formation of a nanocrystalline structure was found in the CuO/TiO₂ catalysts calcined at 500°C. This nanocrystalline structure consisted of aggregated fine anatase particles about 10 nm in size and interblock boundaries between them, in which Cu²⁺ ions were stabilized. Heat treatment of this catalyst at 700°C led to a change in its microstructure with the formation of fine CuO particles 2.5–3 nm in size, which were strongly bound to the surface of TiO₂ (anatase) with a regular well-ordered crystal structure. In the CuO/(CeO₂-TiO₂) catalysts, the nanocrystalline structure of anatase was thermally more stable than in the CuO/TiO₂ catalyst, and it persisted up to 700°C. The study of the catalytic properties of the resulting catalysts showed that the CuO/(CeO₂-TiO₂) catalysts with the nanocrystalline structure of anatase were characterized by the high-est activity in CO oxidation to CO₂.     

TiO2微球的合成及其作为散射层在量子点敏化太阳能电池中的应用

以十六烷基三甲基溴化铵（CTAB）为模板剂,通过TiCl₄在乙醇水溶液中的直接水解,制备了介孔TiO₂微球. X射线衍射（XRD）结果表明所制备的微球晶型为金红石,扫描电镜（SEM）结果显示微球的直径大约为700 nm,由粒径约为16 nm的小颗粒堆积而成. 通过刮涂法制备了在TiO₂小颗粒层上涂覆有作为散射层的TiO₂微球和未涂覆微球的薄膜. 并通过化学浴沉积（CBD）的方法在膜上生长CdS/CdSe量子点,得到了量子点敏化太阳能电池（QDSCs）. 紫外吸收和漫反射结果表明,这种微球结构有利于量子点的沉积,具有较强的光散射作用,有效地增加了光线的收集,从而提高了电池的光电流,最终得到了4.5%的光电转换效率,比不加散射层的电池的效率高27.7%,也比利用传统散射层（由20 nm TiO₂ 小颗粒和400 nm TiO₂ 固体颗粒组成）的电池效率高10.2%. 我们把电池效率的提升归因于较强的光散射作用和较长的电子寿命.     

Sol-gel preparation and characterization of Co/TiO<Subscript>2</Subscript> nanoparticles: Application to the degradation of methyl orange

Cobalt doped titania nanoparticles were synthesized by sol-gel method using titanium(IV) isopropoxide and cobalt nitrate as precursors. X-Ray diffraction (XRD) results showed that titania and Co/TiO₂ nanoparticles only include anatase phase. The framework substitution of Co in TiO₂ nanoparticles was established by XRD, scanning electron microscopy equipped with energy dispersive X-ray microanalysis (SEM-EDX) and Fourier transform infrared (FT-IR) techniques. Transmission electron microscopy (TEM) images confirmed the nanocrystalline nature of Co/TiO₂. The increase of cobalt doping enhanced “red-shift” in the UV-Vis absorption spectra. The dopant suppresses the growth of TiO₂ grains, agglomerates them and shifts the band absorption of TiO₂ from ultraviolet (UV) to visible region. The photocatalytic activity of samples was tested for degradation of methyl orange (MO) solutions. Although the photocatalytic activity of undoped TiO₂ was found to be higher than that of Co/TiO₂ under UV irradiation, the presence of 0.5% Co dopant in TiO₂ resulted in a catalyst with the highest activity under visible irradiation.     

Correlation of the heterogeneous discoloration efficiency of aqueous Rhodamine-B solutions and charge separation enhancement of mixed-phase nanocrystalline titania

Heterogeneous photocatalytic removal of Rhodamine-B (RhB) dye from liquid phase was done using mixed-phase nanocrystalline TiO₂ for enhancement of charge separation and UV-visible-light-driven photocatalysis capabilities. The mixed-phase nanocrystalline TiO₂ was characterized using various analytical techniques including XRD, TEM, UV-vis DRS and PL to investigate its phase composition and structure, nanocrystalline size distribution, band gap energy, and photoluminescence properties. The photocatalytic discoloration efficiency of mixed-phase nanocrystalline titania was explored by monitoring the decomposition of RhB dye in an aqueous solution. The results showed that the as-prepared mixed-phase nanocrystalline TiO₂ was excellent for degradation of RhB molecule, and the combination of crystal phase of anatase and rutile has great effect on decomposition of RhB. The kinetic studies demonstrate that the photocatalytic oxidation reaction followed a pseudo-first-order expression due to the evidence of linear correlation between ln(c/c ₀) vs. reaction time t. Moreover, the aqueous RhB dye decomposition over the as-prepared mixed-phase nanocrystalline TiO₂ catalyst is controlled by RhB pre-adsorption.     

The instructive redox behaviour of 4‐ferrocenylcatechol on nanocrystalline titanium dioxide electrodes

An investigation into the redox behaviour of 4‐ferrocenylcatechol bound to nanocrystalline TiO₂ electrodes identified a limitation to the use of catechol as an electron‐transfer facilitating anchoring group. 4‐Ferrocenylcatechol was adsorbed to transparent nanocrystalline TiO₂ electrodes. UV–visible spectra of the modified electrode were recorded in an acetonitrile‐electrolyte solution. At an applied potential of + 0.45 mV (vs Ag/AgCl/Cl^?) the ferrocenyl group oxidized to the ferrocenium cation and the catecholate group oxidized to the benzoquinone form. Subsequent application of a potential of 0 V reduced the ferrocenium to ferrocene but, owing to the irreversibility of the catechol oxidation in aprotic solvents, benzoquinone is not reduced to catecholate and subsequently desorbs and is lost due into solution. Electrochromic switching of the ferrocenyl electrochromophore on TiO₂ with aprotic electrolyte is, therefore, irreversible. Copyright © 2006 John Wiley & Sons, Ltd.     

Hydrothermal synthesis of mesostructured nanocrystalline TiO2 in an ionic liquid–water mixture and its photocatalytic performance

Anatase mesostructured TiO₂ nanocrystalline was prepared in a mixture of 1-butyl-3-methyl-imidazolium tetrafluoroborate (BMIM⁺BF₄⁻) ionic liquid and water by a low temperature hydrothermal method. The obtained materials were characterized by X-ray powder diffraction (XRD), transmission electron microscopy (TEM) and N₂ adsorption–desorption. The existence of BMIM⁺BF₄⁻ enhanced the polycondensation and crystallization rate, which encouraged the formation of anatase crystal. The TiO₂ particles were thermally very stable and thus resistant to anatase-rutile phase transformation during calcination at high temperatures. The anatase TiO₂ showed high photocatalytic activity in the degradation of p-chlorophenol than that of the commercially available TiO₂, Degussa P25. After 2 h reaction under the UV-irradiation of 250 W, the removing rate of p-chlorophenol was up to 96.3%.     

On the photocatalytic properties of nano-TiO<Subscript>2</Subscript> with dual-phase structure for aqueous methyl-red dye degradation

Heterogeneous photocatalytic removal of methyl-red (MR) dye from liquid phase was done using mixed-phase nanocrystalline TiO₂ for enhancement its photochemical decomposition capabilities. The mixed-phase nanocrystalline TiO₂ was characterized using various techniques to investigate its physicochemical properties. The photocatalytic efficiency of mixed-phase nanocrystalline titania was explored by monitoring the photochemical decay of aqueous MR dye. The results showed that the as-prepared mixed-phase nanocrystalline TiO₂ was excellent for degradation of MR molecule, and the impurity of rutile form increases the photochemical activity by a by a factor of 3. The reaction mechanism was proposed and the results demonstrate that the photocatalytic oxidation reaction followed a pseudo-first-order kinetics.     

Artificial photosynthesis by using chloroplasts from spinach adsorbed on a nanocrystalline TiO2 electrode for photovoltaic conversion

Photovoltaic conversion has been achieved by use of chloroplasts (photosynthetic organs) from spinach adsorbed on a nanocrystalline TiO₂ film on an indium tin oxide (ITO) glass electrode (chloroplast/TiO₂ electrode). The shape of the absorption spectrum of the chloroplast/TiO₂ electrode is almost the same that of a dispersion of the chloroplasts. Absorption maxima of the chloroplast/TiO₂ electrode observed at 430, 475, and 670 nm were attributed to carotenoid and chlorophyll molecules, suggesting that chloroplasts have been adsorbed by the nanocrystalline TiO₂ film on the ITO electrode. The photocurrent responses of chloroplast/TiO₂ electrodes were measured by using a solution of 0.1 M tetrabutylammonium hexafluorophosphate in acetonitrile as redox electrolyte in the presence or absence of water and 100 mW cm^?2 irradiation. The photocurrent of the chloroplast/TiO₂ electrode was increased by adding water to the redox electrolyte. The photocurrent responses of chloroplast/TiO₂ electrodes irradiated with monochromatic light (680 nm, the absorption band of photosystem II complexed with evolved oxygen) were measured by use of a solution of 0.1 M tetrabutylammonium hexafluorophosphate in acetonitrile as redox electrolyte in the presence or absence of water. A chloroplast/TiO₂ electrode photocurrent was observed only when the redox electrolyte containing water was used, indicating that the oxygen evolved from water by photosystem II in chloroplasts adsorbed by a nanocrystalline TiO₂ film on an ITO electrode irradiated at 680 nm is reduced to water by the catalytic activity of the platinum electrode. The maximum incident photon-to-current conversion efficiency (IPCE) was 0.8 % on irradiation at 670 nm.     

Synthesis and In Vitro Bioactivity of TiO2 Nanorods

Titanium dioxide (TiO₂) powders were synthesized by the hydrothermal method. The TiO₂ powders were composed of nanorods with dimensions of 10–18 nm and 60–180 nm in diameter and length, respectively. The in vitro bioactivity of the TiO₂ powders was examined by evaluation of hydroxyapatite (HAp) formation ability in simulated body fluid (SBF). The results showed that TiO₂ nanorods induced the formation of nanocrystalline HAp after soaking in SBF after 1 day rapidly. Our study indicates that TiO₂ nanorods are bioactive and might be used for preparation of new biomaterials.     

A novel approach for the synthesis of visible-light-active nanocrystalline N-doped TiO2 photocatalytic hydrosol

A visible-light-active nitrogen doped nanocrystalline titanium dioxide (N–TiO₂) hydrosol was prepared by precipitation–peptization method and following with hydrothermal crystallization at 110 °C holding for 6 h. XPS results show that nitrogen ions have been doped into the TiO₂ lattice successfully and the UV–Vis absorption spectra indicate that the light absorption edge of the N-doped TiO₂ has been red-shifted into visible light region. The photocatalytic performance of the N-doped TiO₂ thin film prepared from the synthesized hydrosol was evaluated by photodegrading the gaseous formaldehyde (HCHO) under visible light irradiation. The photodegradation ratio of HCHO reached up to 90% within 24 h and the degradation ratio was stable for ten degradation cycles, indicating the prepared hydrosol has good reusable performance in photodegrading gaseous pollutants.