Preparation and thermal characterization of poly(2‐vinylpyridine) copolymers coordinated to Cr nanoparticles

In this study, polystyrene‐block‐poly(2‐vinylpyridine), PS‐b‐P2VP, polyisoprene‐block‐poly(2‐vinylpyridne), PI‐b‐P2VP and poly(methyl metacrylate)‐block‐poly(2‐vinylpyridine), PMMA‐b‐P2VP, coordinated to Cr metal were synthesized and characterized by Fourier transform infrared, transmission electron microscopy and direct pyrolysis mass spectrometry techniques. Both thermal degradation mechanism and thermal stability of P2VP blocks were affected by the coordination of Cr nanoparticles to nitrogen of pyridine rings. Thermal decomposition of P2VP blocks was started by loss of pyridine units leaving an unsaturated and/or crosslinked polymer backbone that degraded at relatively high temperatures. Incorporation of Cr metal did not noticeably influence thermal behavior of PS and PI blocks. However, increase in thermal stability of PMMA block was detected and associated with inhibition of the interactions between carbonyl groups of MMA chains with nitrogen atom of pyridine ring as a consequence of coordination to metal. Copyright © 2015 John Wiley & Sons, Ltd.     

Fabrication of metallized nanoporous films from the self-assembly of a block copolymer and homopolymer mixture

Inorganic compound HAuCl4, which can form a complex with pyridine, is introduced into a poly(styrene-block-2-vinylpyridine) (PS-b-P2VP) block copolymer/poly(methyl methacrylate) (PMMA) homopolymer mixture. The orientation of the cylindrical microdomains formed by the P2VP block, PMMA, and HAuCl4 normal to the substrate surface can be generated via cooperative self-assembly of the mixture. Selective removal of the homopolymer can lead to porous nanostructures containing metal components in P2VP domains, which have a novel photoluminescence property.     

Miscibility and Thermal Behaviour of Poly(styrene-co-itaconic acid)/Poly(butyl methacrylate-co-4-vinylpyridine) Mixtures. Accessibility and Self-Association Effects

Summary: The miscibility and thermal behaviour of binary mixtures of poly(styrene-co-itaconic acid) containing 11 or 27 mol % of itaconic acid (PSIA-11 or PSIA27) with poly(butyl methacrylate) (PBMA)or poly(butyl methacrylate-co-4-vinylpyridine) containing 10 or 26 mol% of 4-vinylpyridine (PBM4VP-10, PBM4V-P26) were investigated by differential scanning calorimetry, scanning electron microscopy, FTIR spectroscopy and thermogravimetry. The results showed that 11 mol % of itaconic acid and 10 mol % of 4-vinylpyridine respectively introduced within the polystyrene and poly(butyl methacrylate) matrices induced the miscibility of this pair of polymers due to specific interactions of hydrogen bonding type with partial pyridine protonation that occurred between the two copolymers as evidenced by FTIR from the appearance of two new bands at 1607 cm⁻¹ and 1640 cm⁻¹. Increasing itaconic acid content from 11 to 27 mol % led to a decrease of the intensity of the specific interactions within PSIA-27/PBM4VP blends and is attributed to both accessibility and self association effects as evidenced by DSC from the change of the shape of the Tg- composition curves and by FTIR spectroscopy. As shown from the thermogravimetric study, the presence of these specific interactions delayed the anhydride formation and improved the thermal stability of the blends.     

聚4-乙烯基吡啶与Cu(Ⅱ)离子配合过程及配合物的结构

采用粘度法确定了聚4-乙烯基吡啶(P4VP)在乙醇/水混合溶剂中的临界交迭浓度c*, 分别在稀溶液与亚浓溶液浓度范围内, 采用光谱法与电导滴定法研究了P4VP与Cu(II)离子的配合过程及配合物的结构, 通过红外光谱(FTIR)对配合物的化学结构进行了表征, 并用差示扫描量热法(DSC)测定了配合物的热性能. 结果表明, 对于相对分子质量为1.06×105的P4VP, 其c*为15 mmol•L−1(按P4VP中的链节量计算). 在稀溶液中P4VP与Cu(II)离子形成可溶性的分子内配合物, 表观配位数为9~10；在亚浓溶液中, P4VP与Cu(II)离子发生分子间配合作用, 由于配位交联, 形成不溶性的配合物P4VP-Cu(II), 配位数为3. P4VP与Cu(II)离子形成配合物后, 玻璃化温度明显提高.     

Complexation and rate of polymerization of acrylic acid and methacrylic acid in the presence of poly(4-vinylpyridine) in dilute methanol solution

A 1:1 hydrogen-bonded complex was formed between acrylic acid (AA) or methacrylic acid (MA) and the pyridine group of poly(4-vinylpyridine) (P4VP) in dilute solutions. A shift of infrared absorption of the hydrogen-bonded acid O? H to a lower energy direction and an upfield shift of acid proton in the NMR were observed when the monomers were added with pyridine. The equilibrium constants of the 1:1 complexation with P4VP measured by using a semipermeable membrane were 0.58 and 0.26 for AA and MA, respectively, at 25°C in methanol. The bromometrically measured initial rate of radical polymerization showed only a slight enhancement in the presence of P4VP, the rate being maximum at the 4VP unit:monomer mole ratio of 0.25 and 0.5 for AA and MA, respectively, in dilute methanol solution at 60°C.     

Synthesis and characterization of poly(4-vinylpyridine) substituted with a novel betaine salt derived from 4,5-dicyanoimidazole

A novel betaine internal salt ( 3 ) has been synthesized by the reaction of pyridine with 1-methyl-2-bromo-4,5-dicyanoimidazole ( 1 ). The reaction of pyridine with 1 serves as a model for the reaction of poly(4-vinylpyridine) with 1 . The reaction of poly(4-vinylpyridine) with 1 gives betaine salt substituted polymers which were characterized by IR, NMR, UV-visible spectroscopy, and viscometry. The substituted polymers were compared to the model compound ( 3 ) and to unsubstituted poly(4-vinylpyridine) in order to determine polymer structure and the degree of substitution. One of the substituted polymers shows polyelectrolyte behavior. Thermal characterization of the substituted polymers shows two exothermic transitions at 260 and 340°C attributed to chemical reactions of the pendant groups.     

CONDUCTING BLENDS OF POLY (2-VINYL PYRIDINE) AND POLYETHYLENE OXIDE WITH HIGH MOLECULAR WEIGHT

Ionic, electronic and mixed (ionic-electronic) conductivities of blends of poly(2-vinylpyridine) (P2VP) and poly(ethylene oxide) (PEO) with high molecular weight after dopedwith LiClO_4, TCNQ or LiClO_4 and TCNQ were investigated. Effects of LiClO_4 and TCNQconcentrations on the conductivity of PEO/P2VP/LiClO_4 or TCNQ blend were studied.The ionic conductivity of PEO/P2VP/LiClO_4 blend increases with increasing PEO content.At a Li/ethylene oxide molar ratio of 0.10 and a TCNQ/2-vinyl pyridine molar ratio of 0.5,the mixed conductivity of PEO / P2VP / LiClO_4 / TCNQ is higher than the total of ionicconductivity of PEO/P2VP/LiClO_4 and electronic conductivity of PEO/P2VP/TCNQwhen the weight ratio of PEO and P2VP is 6/4 or 5/5. Scanning electron microscopy(SEM) on the broken cross-section of the PEO/P2VP/LiClO_4 blend and differential scan-ning calorimetry (DSC) results show that LiClO_4 could act as a compatibilizer in the blend.     

Supramolecular Complex of Poly(styrene)-b-Poly(4-vinylpyridine) and 1-Pyrenebutyric Acid in Thin Film

Summary: Here, we have described a novel supramolecular complex (SMC) between poly(styrene)-b-poly(4-vinylpyridine) (PS-b-P4VP) and 1-pyrenebutyric acid (PBA) and studied of its self assembly in thin film. PBA will make supramolecular complex with the P4VP block due to strong hydrogen bonding between the carboxylic group of 1-pyrenebutyric acid and pyridine ring of P4VP. The formation of supramolecular complex between PS-P4VP and PBA through hydrogen bonding is investigated through FTIR study. The supramolecular complex of PS-b-P4VP and 1-pyrenebutyric acid changed the block copolymer morphology from cylindrical to lamella in thin film due to the increase of the volume fraction of P4VP (PBA). In both cases (parent block copolymer and SMC), the microdomains are oriented normal to the substrate after annealing in a selective solvent. Pure block copolymer shows cylindrical morphology with a periodicity of ∼26 nm, whereas the SMC shows lamellar morphology with a periodicity of ∼ 29 nm. After fabricating the thin film from SMC, 1-pyrenebutyric acid can be easily removed by dissolving the thin film in ethanol to transform the block copolymer thin film into nanotemplate or membrane.     

Thermal decomposition of polystyrene-b-poly(2-vinylpyridine) coordinated to co nanoparticles

Direct pyrolysis mass spectrometry analyses of polystyrene-block-poly(2-vinylpyridne), PS-b-P2VP, indicated that the thermal degradation of each component occurred independently through the decomposition pathways proposed for the corresponding homopolymers; depolymerization for PS and depolymerization and loss of protonated oligomers for P2VP by a more complex degradation mechanism. On the other hand, upon coordination to cobalt nanoparticles, thermal decomposition of the P2VP blocks was initiated by loss of pyridine units, leaving an unsaturated and/or crosslinked polymer backbone that degraded at relatively high temperatures.     

Wholly aromatic polyamides by the direct polycondensation reaction using triphenyl phosphite in the presence of poly(4-vinylpyridine)

The polycondensation reaction of aromatic dicarboxylic acids and diamines by using triphenyl phosphite were carried out in N-methylpyrrolidone (NMP) in the presence of poly(4-vinylpyridine) (P4VP). The reaction, especially of terephthalic acid (TPA), was markedly facilitated to give the absence of P4VP. The reaction promoted by P4VP was further favored by the addition of various pyridine derivatives; of the pyridines examined, pyridine was most effective, giving the best results at a high level (pyridine/P4VP values up to 26). P4VP of the molecular weight in the range of 1.3 × 10⁴?3.0 × 10⁵ did not affect the viscosity of the resulting polymer. These favorable additive effects of P4VP on the reaction of TPA were not observed in the reactions of isophthalic acid, and m -and p-aminobenzoic acids.     

四臂星型聚苯乙烯-聚4-乙烯基吡啶嵌段共聚物纤维状胶束及负载金纳米粒子的研究

通过两步原子转移自由基聚合,制备了4种不同嵌段长度的四臂星型嵌段共聚物苯乙烯-聚4-乙烯基吡啶嵌段共聚物(PS-b-P4VP)4.在选择性溶剂甲苯中,随着嵌段长度的变化,自组装胶束的形态从球型到短棒状和纤维状的转变,其中(PS25-b-P4VP90)4自组装形成的以P4VP为核,以PS为花瓣型壳的纤维状胶束.以这种纤维状胶束作为模板,制备了金纳米粒子均匀分布的一维纳米材料     

Investigation of Hydrogen Bonded Interpolymer Complexes Based on Poly (n-butyl methacrylate–co-methacrylic acid) and Poly (n-butyl methacrylate -co-4-vinyl pyridine). Temperature Effect

Summary: Two kinds of interpolymer complexes as soluble or precipitate of different structures were obtained in both THF and butan-2-one as common solvents by monitoring the hydrogen-bonding density within homoblends of poly(n-butyl methacrylate-co-4-vinylpyridine) (BM4VP) and poly(n-butyl methacrylate-co-methacrylic acid) (BMMA). A viscometry study confirmed such differences between these two types of interpolymer complexes from the behavior of the reduced viscosity of their blend solutions with feed blend composition. Qualitative and quantitative analyses of the interactions that occurred between these copolymers of relatively bulky side chain length containing various amounts of methacrylic acid and 4-vinylpyridine were carried out by FTIR. The fraction of associated pyridine groups to the carboxylic groups of the BMMA increases as the content of these latter increases in the BMMA/BM4VP blends. The obtained results also showed that the fractions of associated pyridine within the BMMA25/BM4VP26 blends are higher than those within BMMA18/BM4VP19 or BMMA8/BM4VP10. The FTIR analysis of a selected BMMA18/BM4VP19 1:1 ratio, carried out from 80 °C to 160 °C, above the glass transition temperatures of the two constituents of the blend, confirms the presence of strong hydrogen bonding interactions between the pyridine and the carboxylic groups within these blends even at 160 °C. A LCST is expected to occur at higher temperature as shown from the progressive decrease of the fraction of the associated pyridine.     

Kinetics and steric limitation of quaternization of poly(4-vinylpyridine) with mesogenic ω-(4′-methoxy-4-biphenylyloxy)alkyl bromides

The kinetics and characteristics of the quaternization of poly(4-vinylpyridine) with very large alkylating agents are studied with the main aim to demonstrate the occurrence of a limitation of the reaction due to steric effect. Kinetics are carried out in sulfolane at different temperatures with two ω-(4'-methoxy-4-biphenylyloxy)alkyl bromides. An important limitation of the reaction is demonstrated: 30% of the pyridine groups are inaccessible at 333 K, 23% at 355.5 K, and 4% at 363 K. Post-quaternization experiments with butyl bromide of already partially quaternized P4VP also demonstrate this limitation. The occurrence of global steric hindrance and hydrophobic effects affecting the conformation of the chain in solution is proposed to explain the limited accessibility of the pyridine groups. The results question the classical neighboring group model generally used to describe the slowing down of the quaternization reaction with increasing quaternization ratio. The thermal stability of the quaternized polymers and the colors of the reaction medium are also discussed. © 1992 John Wiley & Sons, Inc.     

Investigation of the thermal behavior of 4-vinylpyridine–trimethylolpropane trimethacrylate copolymeric microspheres

The study describes the thermal properties of porous microspheres synthesized with functional monomer 4-vinylpyridine (4VP) and crosslinking agent trimethylolpropane trimethacrylate (TRIM). Polymeric 4VP–TRIM microspheres were prepared via seed polymerization, using polystyrene microbeads as a shape template. The resulting 4VP–TRIM microspheres were in the range of 9–12 μm, with specific surface area of about 200 m² g^?1. The thermal properties of 4VP–TRIM materials were evaluated by thermogravimetry and differential scanning calorimetry. By TG/FTIR/MS, it was observed that new porous materials exhibited multi-staged decomposition patterns, different from poly(TRIM) microspheres. DSC and TG experiments showed that water molecules were absorbed on the materials’ surface. The synthesized 4VP–TRIM microspheres exhibited rather high thermal stability. Their initial decomposition temperature was about 300 °C. During the microspheres’ decomposition, an evolution of carbon dioxide, water, and carbon monoxide as main gases, as well as of pyridine and aliphatic compounds, was observed. It was confirmed that the evolved pyridine accelerated the degradation of copolymeric network.     

Nanowear studies in chemically heterogeneous responsive polymeric brushes by surface force microscopy

In this study, we present nanowear studies using surface force microscopy (SFM), on nanoscopic thin films of reversibly switchable binary polymer brushes [polystyrene (PS) + poly(2-vinylpyridine) (P2VP)] and respective monobrushes [polystyrene and poly(2-vinylpyridine)] synthesized via “grafting to” method. The aim was to tune the wear in nanothin polymer brush surfaces. Therefore, the effect of conformational switching of PS + P2VP brush on treatment with selective solvents for PS and P2VP chains on the wear process was investigated. Wear process on thick spin-coated films of PS and P2VP was also investigated for comparison. Nanowear experiments were performed using SFM tip by repeating scans over the surface to follow the wear process closely. The wear process on different surfaces was explained on the basis of molecular entanglement as well as adhesion and friction on the sample surface. For spin-coated PS film as well as PS and PS + P2VP brush surfaces (treated with toluene) with molecular entanglements at surface, wear mechanism involved formation of ripples. However, in case of spin-coated P2VP films as well as P2VP and PS + P2VP brush surfaces (treated with ethanol) with no molecular entanglements at surface, wear occurred via removal of polymer chains and their accumulation at the rim. For PS + P2VP surface treated with acidic water, wear mechanism was complex and inhomogeneous ripple formation was followed by formation of heaps of polymeric material in the center of scanned area. The extent of wear as measured either by root mean square roughness of the surface or spacing between the ripples, increased with the number of scans for all the surfaces. Our study shows that wear mode of polymer brush surfaces is different for different polymers and can be controlled/tuned by the use of binary polymer brushes.     

Hydrogen Bonding Complexes of Poly(styrene-co-2-hydroxyethyl acrylate) and Poly (styrene-co-4-vinylpyridine)

Summary: Random copolymers of poly(styrene-co-4-vinylpyridine) (S4VP) and poly (styrene-co-2-hydroxyethyl acrylate) (SHEA) of different compositions were prepared and characterized. An investigation of the effects of solvent and densities of the interacting species incorporated within these copolymers showed that novel and various hydrogen bonding interpolymer complexes of different structures were elaborated when these copolymers are mixed together. The specific interactions that occurred within the SHEA copolymers and the elaborated complexes were evidenced by FTIR qualitatively from the appearance of a new band at 1604 cm⁻¹ and quantitatively using appropriate spectral curve fitting in the carbonyl and pyridine regions. The intermolecular hydrogen bonding interactions that occurred between the hydroxyl groups of the SHEA and the nitrogen atom of the pyridine groups in the S4VP are stronger than the self-associations within the SHEA. In the solid state, a DSC analysis showed that the variation of the glass transition temperatures of these materials with the composition behaved differently with the densities of interacting species and were analyzed quantitatively. A thermal stability study of the synthesized copolymers and of their different mixtures carried by thermogravimetry confirmed a similar behaviour.     

Thermal degradation and stability of poly(4-vinylpyridine) homopolymer and copolymers of 4-vinylpyridine with methyl acrylate

The thermal stability and degradation behaviour of poly(4-vinylpyridine) (PVP) homopolymer and copolymers of 4-vinylpyridine and methyl acrylate (VP-MA) have been investigated. The reactivity ratios in the copolymerization were determined using an NMR method. The apparent activation energies of the degradation of the homopolymers and copolymers were calculated using the Arrhenius equation.     

Polymer/metal segmental Janus nanoparticles

Polymer/metal composite segmental Janus nanoparticles(NPs) are synthesized by sequential growth againstpoly(4-vinylpyridine)(P4VP) crosslinked cP4VP-PS Janus NPs. A Janus cluster of poly(4-vinylpyridine)-block-polystyrene(P4VPb-PS) diblock copolymer is self-organized after absorption onto a silica patchy sphere via hydrogen bonding. Selective crosslinking of P4VP leads to the formation of robust cP4VP-PS Janus NPs. Within the cP4VP domain, functional species such as metals are preferentially grown by in situ reduction. Other thiol-capped polymers, for example, thiol-cappedpoly(Nisopropylacrylamide)(PNIPAM-SH), can be conjugated onto the opposite side to form polymer/metal triple segmental Janus NPs. The hyperthermia effect of Au NP of PNIPAM-Au@cP4VP-PS by near infrared(NIR) irradiation can trigger a fast transition from amphiphilic to hydrophobic of the Janus NPs at low surrounding temperature. De-stabilization ofthe emulsion is NIR triggered although the system temperature is below LCST(~32 °C).     

聚(丙烯酸钠-4-乙烯基吡啶)的生物降解性和功能性研究

用自由基共聚法制备了一系列可生物降解的功能聚合物聚(丙烯酸钠-4-乙烯基吡啶)[P(SA-co-4VP)],研究了其组成和分子量与生物降解性、资合性及分散性间的关系.结果表明:聚合物中小乙烯基吡啶含量越大,P(SA-co-4VP)的生物降解越显著.分子是一定时,少量的个乙烯基吡啶引入聚丙烯酸钠主链是增强聚合物生物降解性和保持原有功能特性的有效途径.     

Micellization of copolymers via noncovalent interaction with TPPS and aggregation of TPPS

Aggregation of 5,10,15,20-tetrakis-(4-sulfonatophenyl)-porphyrin (TPPS) was investigated in complex micelles composed of poly(ethylene glycol)-block-poly(4-vinylpyridine) (PEG-b-P4VP) and poly(2-(dimethylamino)ethyl methylacrylate)-b-poly(Nisopropylacrylamide) (PDMAEMA-b-PNIPAM) in aqueous solutions.The resultant complex micelles had a complex P4VP/ PDMAEMA/TPPS core and a mixed PEG/PNIPAM shell.Different noncovalent interaction modes between the porphyrin and each copolymer accomplished a co-effect on the ...