Assessing the mechanical,phase inversion,and rheological properties of poly-[(R)-3-hydroxybutyrate-co-(R)-3-hydroxyvalerate] (PHBV) blended with poly-(l-lactic acid) (PLA)

Poly-(3-hydroxybutyrate-co-3-hydroxyvalerate) (PHBV) and poly-(l-lactic acid) (PLA) have attracted much interest in recent years since they are biodegradable, thus can replace synthetic non-degradable materials. In this study, improvements of PHBV, mechanical, phase inversions, and rheological properties were investigated after blending with PLA in varying ratio’s. Three different blends of commercially available PLAs with 92–98% l-lactide units and one grade of PHB with 5% valerate content were blended using a micro-compounder at 175 °C. The composition of PHBV in blends ranged from 50% to 80%. With the addition of PLA, increases in the flexural strength and elastic modulus were observed for several blends, while minor to no changes were detected in the elongation at break and tensile strength as compared to pure PHBV material. Like many conventional plastics, the complex viscosity decreased with increasing rotational frequency due to decreasing entanglements and molecular weight. The complex viscosity with respect to time was very stable for the blends, but no improvements in the PHBV viscosity were observed with the addition of PLA at 170 °C. Three phase inversion models were used to predict the continuity of the blends, and the results showed both dual- and PLA-continuity phase for the blends. In summary, the mechanical results showed improvements in the tensile and flexural properties, while the rheological observation showed minor improvements in the complex viscosity for numerous concentrations.     

Tailoring the properties of electrospun PHBV mats: Co-solution blending and selective removal of PEO

Microstructure, surface topography, thermal and mechanical features of poly(3-hydroxybutyrate-co-3-hydroxyvalerate) (PHBV) electrospun non-woven mats were modified, modulated and tailored through blending with different polyethylene oxide (PEO) amounts (20, 30 and 50% wt/wt). The optimal parameters of the soaking protocol for the selective removal of the sacrificial polymer were accurately identified by means of scanning electron microscopy (SEM), X-ray diffraction analysis (XRD), Fourier transform infrared attenuated total reflectance (FTIR-ATR) spectroscopy, simultaneous thermogravimetric and differential analyses (TG-DTA) and differential scanning calorimetry (DSC). The complete PEO removal after soaking in H₂O for 7 days with daily refreshment was confirmed. The resulting samples were only comprised of PHBV fibers characterized by a remarkable decrease of the average size with respect to the respective blends. Their surface topography was corrugated and rough and presented nodules, pits, nanopores, shallow and elongated nanostructured indents/grooves along the fiber axis. A remarkable reduction (>75%) of the tensile modulus (E) of electrospun PHBV mats (15–20 MPa) was obtained, maintaining comparable elongation at break (ε_max) values (20–30%).     

Thermal degradation and their kinetics of biodegradable poly(butylene succinate-co-butylene terephthate)s under nitrogen and air atmospheres

In this study, thermal degradation and their related kinetics have been investigated mainly by means of thermal gravimetrical analyzer (TGA) under the dynamic nitrogen and air atmospheres for the chemically prepared biodegradable aliphatic-aromatic copolyesters of poly(butylene succinate-co-butylene terephthalate) (PBST). To further shed new lights on the comonomer molar composition and experimental condition dependences of thermal degradation kinetics, the as-known Friedman model was at first applied to quantitatively evaluate the kinetic parameters in terms of activation energy (E), degradation reaction order (n) and the frequency factor (Z). The results clearly demonstrated that thermal stabilities of these PBST copolyesters were substantially enhanced with the incorporation of more rigid butylene terephthalate comonomer, and tended to be much better in nitrogen than in air. Furthermore, the Friedman, Freeman-Carroll and Chang models were concurrently employed to quantitatively evaluate the thermal degradation kinetic parameters of the PBST copolyesters in nitrogen at different heating rates of 1, 2 and 5 K/min. It was found that the thermal degradation kinetic parameters for the PBST copolyesters were strongly dependent on the heating rate and calculating models. In addition, life-time parameters of the biodegradable PBST copolyesters were first calculated to predict the maximum usable temperatures, and this would be useful for practical application of these new bio-based green plastics.     

Thermal degradation behavior of poly(4-hydroxybutyric acid)

Thermal degradation behavior of poly(4-hydroxybutyric acid) (P(4HB)) was investigated by thermogravimetric and pyrolysis-gas chromatography mass spectrometric analyses under both isothermal and non-isothermal conditions. Based on the thermogravimetric analysis, it was found that two distinct processes occurred at temperatures below and above 350 °C during the non-isothermal degradation of P(4HB) samples depending on both the molecular weight and the heating rate. From ¹H NMR analysis of the residual P(4HB) molecules after isothermal degradations at different temperatures, it was confirmed that the ω-hydroxyl chain-end was remained unchanged in the residual P(4HB) molecules at temperatures below 300 °C, while the ω-chain-end of P(4HB) molecules was converted to 3-butenoyl units at temperatures above 300 °C. In contrast, the majority of the volatile products evolved during thermal degradation of P(4HB) was γ-butyrolactone regardless of the degradation temperature. From these results, it is concluded that during the thermal degradation of P(4HB), the selective formation of γ-butyrolactone via unzipping reaction from the ω-hydroxyl chain-end predominantly occurs at temperatures below 300 °C. At temperatures above 300 °C, both the cis-elimination reaction of 4HB unit and the formation of cyclic macromolecules of P(4HB) via intramolecular transesterification take place in addition to unzipping reaction from the ω-hydroxyl chain-end. Finally, the primary reaction of thermal degradation of P(4HB) at temperatures above 350 °C progresses by the cyclic rupture via intramolecular transesterification of P(4HB) molecules with a release of γ-butyrolactone as volatile product. Moreover, we carried out the thermal degradation tests for copolymer of 93 mol% of 4HB with 7 mol% of 3-hydroxybutyric acid (3HB) to examine the effect of 3HB units on thermal stability of P(4HB).     

Assessment of PHB with varying hydroxyvalerate content for potential packaging applications

Poly-(hydroxybutyrate) (PHB) is biodegradable aliphatic polyester that is produced by a wide range of microorganisms. Basic PHB has relatively high glass transition and melting temperatures. To improve flexibility for potential packaging applications, PHB is synthesized with various co-polymers such as poly-(3-hydroxyvalerate) (HV) leading to a decrease of the glass transitions and melting temperatures. In addition, the HV broadens the processing window since there is improved melt stability at lower processing temperatures. In this study, PHB synthesized with different valerate contents (5%, 12%, and 20%) and varying in molecular weights were characterized. All PHBV materials displayed a glass transition between −10 and 20 °C. The two melting transitions found for Aldrich 5%, 12%, and Tianan 20%, resulted from crystals formed during cooling of the samples. The complex viscosity decreased with increasing temperature due to a decrease in molecular weights of the samples. These results suggest that processing the co-polymer below 160 °C would be beneficial with low screw speed. The mechanical results indicate all PHBV materials had high elastic modulus and flexural strength with low tensile strength and elongation at break. The WVTR results indicated the polymer to be very hydrophilic, resulting in higher water transmission rates.     

Thermal degradation behaviour of poly(vinyl chloride) in the presence of poly(N′-acryloyl benzhydrazide)

The thermal degradation behaviour of poly(vinyl chloride), PVC, in the presence of poly(N′-acryloyl benzhydrazide), PABH, has been studied using continuous potentiometric determination of the evolved hydrogen chloride gas from the degradation and by measuring the extent of discoloration of the degraded samples. Blending this polymeric additive with dibasic lead carbonate, DBLC, reference stabilizer in different ratios had synergistic effects on both the thermal stability and the extent of discoloration of PVC.     

Application of high resolution thermogravimetry to the study of thermal stability of poly(vinyl chloride) resins

The influence of microstructure on thermal degradation behaviour was studied in five samples of pure poly(vinyl chloride) (PVC) obtained at different polymerisation temperatures. Tacticity of the samples was characterized by Fourier transform infrared spectroscopy (FTIR), and their thermogravimetric behaviour was measured by high resolution (Hi-Res™) TGA. This technique is able to detect two independent weight loss steps in the dehydrochlorination. The relative contribution of these two steps responds to different syndiotacticity tendency of PVC samples, in accordance with FTIR results.     

Revision of the structure of cuculoquinone to 3,3′-bis(6-ethyl-2,5,7,8-tetrahydroxy-1,4-naphthoquinone) and confirmation of the proposed structure by synthesis

A reinvestigation of cuculoquinone, previously isolated from the lichen Cetraria cucullata, led to a revision of the proposed structure to 3,3′-bis(6-ethyl-2,5,7,8-tetrahydroxy-1,4-naphthoquinone). The new structure was confirmed by synthesis.     

Formation of new 4-isocyanobut-2-enenitriles by thermal ring cleavage of 3-pyridyl azides

A new thermal ring cleavage of 3-pyridyl nitrenes for the formation of 4-isocyanobut-2-enenitrile products is reported. Thermolysis of 4-(thien-3-yl)-3-pyridyl azide 1 and 3-azido-4-(1-TIPS-1H-pyrrol-3-yl)pyridine 5 afforded two new isonitrile-nitrile products by ring cleavage; 4-isocyano-2-(thiophen-3-yl)but-2-enenitrile (3, 27%) and 4-isocyano-2-(1-TIPS-1H-pyrrol-3-yl)but-2-enenitrile (7, 20%), in addition to our previously reported pyrido[3,4-b]thienopyrrole (2, 29%) and pyrido[3,4-b]pyrrolo[3,2-d]pyrrole (6, 71%) products. Minor amounts of 2-(thien-3-yl)-1H-pyrrole-3-carbonitrile (4, 6%), formed by ring contraction, were also isolated after thermolysis of azide 1. Isonitriles 3 and 7 underwent degradation into amine 3b and formamide 7a by acidic hydrolysis. The nature and chemistry of compounds 3, 4 and 7 were investigated.     

Enhanced thermal stability of poly(1,4-dioxan-2-one) in melt by adding a chelator

Thermal stability of poly(p-dioxanone) (PPDO) was investigated isothermally and non-isothermally under air atmosphere using thermogravimetry (TG). The addition of 4-benzoyl-3-methyl-1-phenyl-2-pyrazolin-5-one (PMBP) could enhance successfully the thermal stability of PPDO compared with those of as-prepared and purified PPDO at temperature below about 230 °C. The activation energies for thermal degradation (ΔE_td) were evaluated at different weight loss values from TG data using the procedure recommended by MacCallum et al. The ΔE_td values of as-prepared PPDO, purified PPDO and PPDO containing 1.0 wt% PMBP were in the ranges of 20-50, 35-60, and 56-88 kJ mol⁻¹, respectively, when they were evaluated at weight loss values of 10-80%. The remaining weights increase with the amounts of PMBP added up to 1.5 wt%. The mechanism for the enhanced thermal stability of PPDO was discussed.     

Spectroscopic, thermal and structural studies of cocrystal of 2,2′-diamino-4,4′-bis(1,3-thiazole) with 4,4′-bipyridine, 1,2-bis(4-pyridyl)ethylene and 1,3-bis(4-pyridyl)propane

Three new cocrystals based upon 2,2′-diamino-4,4′-bis(1,3-thiazole) (DABTZ) with 4,4′-bipyridine (4,4′-bipy), 1,2-bis(4-pyridyl)ethylene (bpe) and 1,3-bis(4-pyridyl)propane (bpp): [(DABTZ) (4,4′-bipy)], [(DABTZ) (bpe)] and [(DABTZ) (bpp)] have been synthesized and characterized by elemental analysis, IR-, ¹H NMR-, ¹³C NMR spectroscopy and studied by thermal and X-ray crystallography. Self-assembly of these compounds in the solid state is likely caused by both hydrogen bonding, and π-π stacking.     

Understanding the role of nanosilica particle surfaces in the thermal degradation of nanosilica-poly(methyl methacrylate) solution-blended nanocomposites: From low to high silica concentration

Nanocomposites of poly(methyl methacrylate) and 12 nm silica particles have been prepared by a casting procedure which allows the homogeneous dispersion of up to 35 wt% of silica. Twelve nanocomposites with compositions ranging from 1 to 35 wt% have been prepared and studied by Scanning Electron Microscopy, Fourier Transform Infrared Spectroscopy, Differential Scanning Calorimetry, Thermogravimetric Analysis and Isothermal Chemiluminescence. Thermal stability increases outstandingly as soon as 1 wt% of silica is added to PMMA. This effect is well-known but had not been explained up to now. Of the two main processes which initiate degradation in PMMA, radical formation at labile chain ends and random chain scission, it is the former which disappears in composites with 3 wt% of silica. The origin of the thermal stabilization in these polymer composites is thus the blocking of the PMMA chain end by the silica particle. At the same time, viscous flow decreases progressively, and composites with 20 wt% of silica or over are dimensionally stable even if heated at 300 °C for several hours. The concomitant decrease of viscous flow and increase of low temperature thermal stability shift the temperature range of application of these composites strongly, and the understanding of the silica surface role allows envisaging the control of the behaviour.     

Synthesis of new fluorescent 2-(2′,2″-bithienyl)-1,3-benzothiazoles

Bithienyl-1,3-benzothiazole derivatives were synthesised by reacting various 5-formyl-5′-alkoxy- or 5-formyl-5′-N,N-dialkylamino-2,2′-bithiophenes with ortho-aminobenzenethiol in good to excellent yields. Evaluation of the fluorescence properties of these compounds was carried out. They show strong fluorescence in the 450-600 nm region, as well as high quantum yields and large Stokes’ shifts.     

Regioselective monobromination of (E)-1-(2′-hydroxy-4′,6′-dimethoxyphenyl)-3-aryl-2-propen-1-ones using bromodimethylsulfonium bromide and synthesis of 8-bromoflavones and 7-bromoaurones

A wide variety of monobrominated compounds 2a-l have been prepared in good yields from (E)-1-(2′-hydroxy-4′,6′-dimethoxyphenyl)-3-aryl-2-propen-1-ones (1a-l) through regioselective ring bromination using 1.5 equiv of bromodimethylsulfonium bromide (BDMS) at room temperature. Similarly, some of the 2′-hydroxychalcones can be converted directly into tribromides 3 or dibromides 4 by employing 4.0 equiv of BDMS under different reaction conditions which in turn can be transformed into 8-bromoflavones and 7-bromoaurones on treatment with 0.2 M ethanolic KOH solution. Mild reaction conditions, good yields and no chromatographic separation are some of the salient features of the present protocol.     

Domino reactions in water for the stereoselective synthesis of novel spiro dihydro-2′H-[indene-2,3′-thiophen]-1(3H)-ones with three contiguous stereocenters

The domino reactions of (E)-2-(aryl)-2,3-dihydro-1H-inden-1-ones and 1,4-dithiane-2,5-diol in the presence of triethylamine in water stereoselectively afforded a library of 2′-(aryl)-4′-hydroxy-4′,5′-dihydro-2′H-spiro[indene-2,3′-thiophen]-1(3H)-ones. This transformation presumably proceeds via the generation of 2-mercaptoacetaldehyde from 1,4-dithiane-2,5-diol followed by Michael addition–intramolecular aldol sequence with C–C and C–S bond formations and creation of three contiguous stereocenters in a one-pot operation.     

Efficient one-pot formation of 4-N-substituted 2,4-dihydro-3H-1,2,4-triazolin-3-ones from primary amines using N′-(ethoxymethylene)hydrazinecarboxylic acid methyl ester

(E)-N′-(Ethoxymethylene)hydrazinecarboxylic acid methyl ester was synthesized in one step in good yield. This reagent was successfully applied to the one-pot synthesis of 4-substituted 2,4-dihydro-3H-1,2,4-triazolin-3-ones from readily available primary alkyl and aryl amines. This reaction process is relatively mild and easy to carry out. It is especially useful for the formation of sterically hindered triazolinones, which are otherwise difficult to obtain via existing literature procedures. A possible mechanistic pathway for the transformation is outlined.     

Synthesis, structure, electrochemical properties, cytotoxic effects and antioxidant activity of 5-amino-8-methyl-4H-benzopyran-4-one and its copper(II) complexes

The chromone derivative 5-amino-8-methyl-4H-benzopyran-4-one (ligand) (1) has been used to obtain a series of Cu(II) complexes 2-4 as potential anticancer compounds. The molecular structures of ligand 1 and its Cu(II) complex 3 have been determined by X-ray crystallography. The cytotoxicity of all obtained compounds has been evaluated on melanoma A375 cell line. The ability of compounds 1-4 to take part in redox reactions and their antioxidant activity have been studied.     

Gallium(III) selective sensors based on 2-amino-3-(α-N-phenylmethyl-2′-amino-1′,4′-naphthoquinonyl)-1,4 naphthoquinones in poly (vinyl chloride)

Synthesis and application of 2-amino-3-(α-N-phenylmethyl-2′-amino-1′,4′-naphthoquinonyl)-1,4 naphthoquinone (S) as a neutral ionophore for the determination of gallium(III) in PVC-based membrane sensors has been described. The sensor based on membrane composition (w/w, mg%); 5.0 (S):30.0 (PVC):5.0 (KTpClPB):60.0 (o-NPOE) is the best and showed a working range of 2.3 × 10⁻⁷ to 1.0 × 10⁻² M with detection limit of 1.2 × 10⁻⁷ M. It can tolerate non-aqueous media up to 15% with a slope of 19.7 mV decade⁻¹ of activity. The sensor has been used to assess the Ga(III) concentration in different natural samples (peach and tomato leaves, coal-fly-ash and river sediments). It can be used for 2.5 months without any distortion in results, after which, leaching of ionophore was observed from the membrane phase. The proposed sensor has shown a good dynamic response time of 11 s.     

Synthesis of a solvent-sensitive highly fluorescent derivative of perfluorocyclopentene

A solvent-sensitive highly fluorescent compound, N-[2-(1′,3′,4′,4′,5′,5′-hexafluorocyclopentenyl)]-4-(5-methoxy-thiazolyl)pyridine (1D) was synthesized as an unexpected product of the reaction of 4-bromo-5-methoxy-2-(4-pyridyl)thiazole (1B) with perfluorocyclopentene in the presence of n-BuLi. Primary mechanism of this reaction was proposed, and the photophysical properties of 1D in different solvents were studied.     

Synthesis of a novel tetracyclic azaindolo[2,1-c][1,4]benzoxazine ring system

Synthesis of a series of novel fused tetracyclic mono- and diazaindolo[2,1-c][1,4]benzoxazine heterocyclic compounds 3a-o has been achieved in a two-step one-pot reaction set up starting from commercially available or easily accessible inputs. For example, reaction of di-lithiated (N-Boc)-2-amino-3-methylpyridine Li₂-2a with Weinreb amide of 2-(2,4-difluorophenoxy)-2,2-dimethylacetic acid 1a, followed by TFA treatment furnished the tetracyclic compound 3a, which is essentially a fusion of 7-azaindole and 3,4-dihydro[1,4]benzoxazine, in 70% isolated yield. A competitive elimination by-product 4a was also observed (24% isolated yield) in this case. Based on our initial results, a structural basis and molecular mechanism have been suggested to explain these two parallel reactions. Consequently, with appropriate structural tuning of 1, formation of the individual products can be controlled.