Shear induced structuration of liquid crystalline epoxy thermosets

Low-molecular weight liquid crystals (LC) have wide technological applications due to their self-assembly in the mesophase. An azomethine nematic monomer based on diglycidyl functionalized mesogenic core and without spacers has been cured with a diamine. The great affinity of LC epoxy to the formation of ordered structures introduces a spatial driving force into the process of curing. Thermal and LC behaviors were investigated by differential scanning calorimetry (DSC) and polarized optical microscopy (POM). The nature of the LC phases was confirmed by X-ray diffraction. Rheological experiments were conducted during crosslinking at different shear stresses. The viscosity of the mixture is strongly decreasing by three orders of magnitude when the solid epoxy is melting into a LC phase, and is increasing again due to the curing. Unexpected results were found. Applying a stress during curing had a profound influence on the ordering of the structure. The material becomes isotropic if a small shear stress is applied. Then, the higher the stress is, more ordered the final material is. For the highest stresses, the final material is in a highly ordered, quasi-crystalline, smectic structure.     

All‐aromatic liquid crystalline thermosets with high glass transition temperatures

We have synthesized and characterized a new family of low melting all‐aromatic ester‐based liquid crystal oligomers end‐capped with reactive phenylethynyl end groups. In a consecutive, high‐temperature step, the reactive end groups were thermally activated and polymerization was initiated. This reactive oligomer approach allows us to synthesize liquid crystal thermosets with outstanding mechanical and thermal properties, which are superior to well‐known high‐performance polymers such as PPS and PEEK. We have modified an intractable LC formulation based on hydroquinone and terephthalic acid, with M_n = 1000, 5000, and 9000 g mol^?1, and varied the backbone composition using isophthalic acid, resorcinol, 4‐hydroxy‐benzoic acid, 6‐hydroxy‐2‐naphthoic acid, and chlorohydroquinone. All fully cured polymers showed glass transition temperatures in the range of 164–275 °C, and high storage moduli at room temperature (～ 5 GPa) and elevated temperature (～ 2 GPa at 200 °C). All oligomers display nematic mesophases and in most cases, the nematic order is maintained after cure. Rheology experiments showed that the phenylethynyl end group undergoes predominantly chain extension below 340 °C and crosslinking above this temperature. Highly aligned fibers could be spun from the nematic melt, and we found that the order parameter 〈P₂〉 was not affected by the chain extension and crosslink chemistry. © 2009 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 47: 1368–1380, 2009     

Thermally stable liquid crystalline thermosets based on aromatic copolyesters: Preparation and properties

The synthesis and physical properties are described for a thermally stable liquid crystalline (LC) thermoset based on all aromatic ester units. The persistence of the liquid crystalline phase throughout the curing process was monitored with polarizing optical microscopy. The applicability of these new liquid crystalline thermosets has been evaluated for use as an adhesive for bonding metals, namely titanium. The failure of the adhesive bonds always occurs within the polymer; thus it can be inferred that bonding at the polymer-metal interface is very good. This strong interfacial bonding is attributed to low cure shrinkage and CTE matching of the underlying substrate by the LC resins. The cohesive properties and strength of the cured resin can be greatly enhanced by the addition of filler materials. © 1997 John Wiley & Sons, Inc. J Polym Sci A: Polym Chem 35:1061–1067, 1997     

Synthesis and comparative studies of carbosilane liquid crystalline dendrimers with chiral terminal mesogenic groups

A new series of carbosilane liquid crystalline (LC) dendrimers from the first to the third generations with 8, 16 and 32 chiral terminal mesogenic groups, respectively, has been synthesized. The molecular structures and purity of all new compounds were confirmed by ¹H NMR spectroscopy and GPC analysis. Data of polarization microscopy and SAX analysis demonstrated that all LC dendrimers synthesized form a chiral smectic SmC* phase at temperatures below 50 °C. It has been found that bistable electrooptical switching is observed for all dendrimers. The influence of chiral mesogenic fragment length on phase behavior and ferroelectric properties of carbosilane LC dendrimers is discussed.     

Anisotropic thermosets from liquid‐crystalline azomethynic epoxy resins and primary aromatic diamines

Novel epoxy‐terminated monomers based on imine groups were synthesized and their mesogenic properties studied. Aliphatic spacers of different lengths were introduced between the rigid unit and the glycidylic group, and their liquid‐crystalline behavior was examined. They were reacted with primary aromatic diamines inside a magnetic field so that the formation of anisotropic networks could be investigated. The influence of curing conditions and the structure of monomers and amines on the formation of liquid‐crystal thermosets were investigated. Thermosets with locked nematic textures were obtained in all cases. The influence of a 7.1 T magnetic field on the macroscopic orientation of these materials was studied, and mechanical properties of the resulting networks were evaluated by dynamic mechanical analysis. © 2002 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 41: 1–12, 2003     

Synthesis,structure, and characterization of nematic liquid‐crystalline thermosets based on bisacrylates

Four bisacrylate mesogenic monomers and the corresponding liquid‐crystalline thermosets were synthesized. The chemical structures of the intermediate compounds and monomers obtained were confirmed by elemental analyses, Fourier transform infrared, and ¹H NMR and ¹³C NMR spectra. The mesomorphic properties and thermal stability were investigated with differential scanning calorimetry, thermogravimetric analysis, polarized optical microscopy, and X‐ray diffraction measurements. The influence of the curing temperatures and time on the phase behavior and thermal stability of the thermosets was discussed. All the monomers and thermosets exhibited a nematic schlieren texture. However, the monomers only showed the melting transition, and the thermosets displayed the glass transition. The experimental results demonstrated that the monomer structures strongly affected the phase behavior and the curing reaction rate, and the glass‐transition temperatures and thermal stability of the thermosets increased with the curing temperature and time. © 2005 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 43: 4478–4485, 2005     

Liquid crystalline and photoactive poly[4,4′-stilbeneoxy]alkylbiphenylphosphates

A series of liquid crystalline and photoactive polymers were synthesized from biphenylphosphorodichloridate with various 4,4′-bis(m-hydroxyalkyloxy)stilbenes (m = 2, 4, 6, 8, 10) in chloroform by solution polycondensation method using an acid scavenger. The resultant polymers were characterized by inherent viscosity, FT-IR, ¹H, ¹³C and ³¹P NMR spectroscopies. The liquid crystalline (LC) properties were studied using HOPM and DSC and it was inferred that out of the five polymers synthesized, higher methylene chain containing polymers (m = 6, 8, 10) exhibited LC properties. Thermogravimetric analysis revealed that all the polymers were stable in between 290 and 367 °C and underwent degradation thereafter. The thermal stability and char yield of the polymers decreased with increase in flexible methylene chain. The photochemical properties of these polymers were investigated by UV and fluorescence spectroscopy. Crosslinking proceeds via 2π-2π cycloaddition reaction of the -CHCH- of the stilbene moieties. The rate of crosslinking increases with increase in methylene chain length in the polymer backbone. The fluorescence spectra showed that the longer methylene spacer containing polymers exhibited larger red-shifts than the shorter spacer containing polymers.     

Synthesis and curing of novel LC twin epoxy monomers for liquid crystal thermosets

This article describes the synthesis and characterization of new liquid crystalline thermosets having a twin structure. Nematic epoxy-terminated monomers based on a phenyl benzoate twin mesogen connected by an alkylene spacer were synthesized for these studies. In addition, an epoxy-terminated monomer based on a 1,4-bis(benzoyloxy)phenylene mesogen was synthesized to determine the effect of the position of the mesogen on the final network structure. The diepoxy monomer made with phenyl benzoate twin mesogens connected with an alkylene spacer formed a smectic-like network when cured with diamines. This smectic organization appeared even though the diepoxy monomer itself showed only a nematic mesophase over a narrow temperature range. The presence of crosslinks at both ends of the mesogens helped to retain a uniform spacing between crosslinking sites during the curing reaction, and aided formation of the smectic layer arrangement. The epoxy monomer possessing a 1,4-bis(benzoyloxy)phenylene mesogen and two epoxidized alkylene end groups on both sides of the mesogen formed a stable nematic mesophase. However, in contrast to the twin epoxies, the latter epoxy when reacted with diamines tended to produce a nematic-like network which was retained as the crosslinking reaction proceeded. © 1996 John Wiley & Sons, Inc.     

Liquid crystalline side chain polymer with a poly (Geraniol-co-MMA) backbone and phenylbenzoate mesogenic group: synthesis and characterization

A new side chain liquid crystalline polymers have been synthesized and characterized in which [geraniol-co-MMA] polymer are used as a backbone linked via polymethylene spacer to phenyl benzoate mesogenic group. The polymer exhibits enantiotropic liquid crystallinity with nematic phase and does not exhibit side chain crystallization .A clear difference between the nature of the mesophase is evidenced between [Geraniol-co-MMA] main chain and methacrylate polymers .The LC polymer exhibit glass transition at 40 °C. In a comparative analysis, we discuss the relevance of polymer backbone in the synthesis of side chain liquid crystalline polymers.     

Cure reaction and phase behavior of liquid crystalline epoxides-anhydride systems

A series of novel liquid crystalline epoxides with lateral substituents were cured with anhydrides and the cure kinetics was investigated by non-isothermal DSC technique. The results showed that the lengths of lateral substituents have great effect on the value of Ea. The curing reaction became less active, when the liquid crystalline epoxides have long lateral substituents and were controlled by diffusion at the late stage of cure. A nematic structure was observed by POM and XRD.     

Liquid‐crystalline thermosets from mesogenic dimeric epoxy resins by tertiary amine catalysis

Liquid‐crystalline thermosets (LCTs) were prepared by the curing of difunctional liquid‐crystalline dimeric epoxy monomers with imine moieties in the mesogenic core and central spacers of different lengths. Tertiary amines were used as catalysts in different proportions. The locked mesophases of the LCTs were characterized by polarized optical microscopy and wide‐angle X‐ray scattering and identified as smectic‐C, regardless of their smectic‐A or smectic‐C initial state. The influence of a 7.1‐T magnetic field on the macroscopic orientation of these materials was studied by dynamic mechanical analysis, and the orientation parameter was determined by IR dichroism. © 2002 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 40: 3916–3926, 2002     

Phase behavior of liquid crystalline elastomers based on a tri-vinyl mesogenic cross-linker

A series of cross-linked liquid crystalline polymers are prepared by graft copolymerization, and their liquid crystalline properties are characterized by DSC and POM. The results show that low levels of cross-linking do not obviously affect the phase behavior of the network polymers; in contrast, high levels of cross-linking may have more drastic influences, and liquid crystalline phases may lose, and more marked variation in phase transition will occur in materials with more direct coupling through a shorter or stiffer coupling chain between mesogenic side units and polymer backbone. At the same time, the coupling between the polymer chain and sidegroups results in stress-induced orientation in LCEs.     

Novel liquid crystalline resins based on MQ siloxanes

MQ siloxane resins containing Si-H functions have been made from tetramethyldisiloxane and tetraethoxysilane. Hydrosilylations with mesogenic alkenes give low molecular weight liquid crystal MQ resins with potentially useful properties.     

New liquid‐crystalline thermosets from liquid‐crystalline bisazomethynic epoxy resins with naphthylene disruptors in the central core

We synthesized novel epoxy‐terminated monomers on the basis of imine groups with spacers of different lengths between mesogens and reactive groups and examined their mesogenic properties. Their reaction with primary aromatic diamines and tertiary amines was carried out to investigate the formation of liquid‐crystalline thermosets. We explored how the curing conditions and the structures of the monomers and amines affected the formation of ordered networks. The special symmetry of a 1,5‐disubstituted naphthalene unit in the central core led to nematic mesophases in the pure liquid‐crystalline epoxy resins, and thermosets with locked nematic textures were obtained in all cases, regardless of the length of the spacer. © 2003 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 41: 1536–1544, 2003     

Antiferroelectric behavior in a liquid crystalline polymer

Electro-optic and polarization reversal measurements were performed on a side-chain polymer exhibiting a chiral smectic phase. Based on the observed electro-optic and current responses, we discuss the possibility of an antiferroelectric structure in the polymer. In order to establish a model for the observed behavior, a detailed comparison with the properties of the low molar mass antiferroelectric substance MHPOBC was made. The birefringence modulation in the chiral smectic polymer, originating from the field-induced antiferroelectric-to-ferroelectric transition, is analyzed for the case of a randomly oriented sample. The result shows that the coincidence of birefringence modulation and polarization current peaks is strong evidence for the existence of antiferroelectric order in the smectic layers. Such coincidence was observed both for MHPOBC and the chiral side-chain polyacrylate.     

The mechanical and magnetic alignment of liquid crystalline epoxy thermosets

The processing of a new series of liquid crystalline (LC) epoxy networks was evaluated. Above the glass transition temperature, the low crosslink density networks could be mechanically aligned. The mechanically oriented networks readily lost orientation upon heating. Highly anisotropic liquid crystalline (LC) epoxy networks were also prepared by aligning the mesophase of the prepolymer during the curing process under the influence of a magnetic field. Orientation parameters (f) of 0.13 to 0.57 were achieved by these processes as determined by x-ray diffraction analysis. The ability of the magnetically aligned networks to retain their orientation above the glass transition temperature was determined by time-resolved x-ray diffraction. The stability of the alignment of these networks was found to depend on crosslink density. The effect of the anisotropy of these networks was investigated by measuring the coefficient of thermal expansion (CTE). In the aligned networks, there was a substantial reduction in CTE parallel to the direction of the applied field compared to the randomly oriented networks. © 1992 John Wiley & Sons, Inc.     

Dimeric liquid‐crystalline epoxyimine monomers: Influence of dipolar moments on mesomorphic behavior and the formation of liquid‐crystalline thermosets

We examine some of the structural aspects that influence the mesomorphic behavior of liquid‐crystalline dimeric epoxy resins with imine groups in the mesogens. We synthesized two new series of monomers and compared them with previously synthesized monomers. Compared with previously studied series, the imine group in the new monomers is oriented differently with respect to the ether and ester groups linked to the end of the mesogenic unit. Our results confirmed the importance of polarization of the mesogenic groups and the presence of an ester group in the inner position in the formation of smectic mesophases. By curing with primary and tertiary amines, we demonstrate that these two requirements are necessary if liquid‐crystalline thermosets are to be obtained with different degrees of order. These studies were carried out with differential scanning calorimetry, polarized optical microscopy, and X‐ray diffraction. © 2003 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 41: 1465–1477, 2003     

Synthesis and curing of liquid crystalline epoxy resin based on naphthalene mesogen

Aromatic liquid crystalline epoxy resin (LCE) based on naphthalene mesogen was synthesized and cured with aromatic diamines to prepare heat‐resistant LCE networks. Diaminodiphenylester (DDE) and diaminodiphenylsulfone (DDS) were used as curing agents. The curing reaction and liquid crystalline phase of LCE were monitored, and mechanical and thermal properties of cured LCE network were also investigated. Curing and postcuring peaks were observed in dynamic DSC thermogram. LCE network cured with DDE displayed liquid crystalline phase in the curing temperature range between 183 and 260°C, while that cured with DDS formed one between 182 and 230°C. Glass transition temperature of cured LCE network was above 240°C, and crosslinked network was thermally stable up to 330°C. © 1999 John Wiley & Sons, Inc. J Polym Sci A: Polym Chem 37: 419–425, 1999     

Liquid‐crystalline thermosets from liquid‐crystalline epoxy resins containing bisazomethinebiphenylene mesogens in the central core: Copolymerization with a nonmesomorphic epoxy resin

A new series of liquid‐crystalline epoxy resins was synthesized, and their mesomorphic behavior was investigated with differential scanning calorimetry, polarized optical microscopy, and wide‐angle X‐ray scattering. These glycidylic compounds had central aromatic imine mesogens derived from benzidine and aliphatic spacers of up to 10 methylene units that linked the mesogens to the glycidylic groups. Crosslinking these monomers with primary aromatic diamines led to nematic networks, some of which contained crystal inclusions. However, through curing with tertiary amines as catalytic agents or through copolymerization with different proportions of the nonmesomorphic epoxy monomer and primary amines as crosslinking agents, smectic C organized thermosets were prepared when the spacers had at least four methylene carbons. When they had fewer than four, the networks were nematic. © 2004 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 42: 3631–3643, 2004     

Synthesis and properties of cholesteric liquid crystalline elastomers

The synthesis of new side-chain cholesteric liquid crystalline elastomers, containing the flexible non-mesogenic crosslinking agent M-1 and the cholesteric monomer M-2, is described by a one-step hydrosilication reaction. The chemical structures of the monomers and network polymers obtained were confirmed by FT-IR spectroscopy. Their mesogenic properties and phase behavior were investigated by differential scanning calorimetry, polarizing optical microscopy, and x-ray diffraction measurements. The influence of the crosslinking units on the phase behavior is discussed. The network polymers showed elasticity, reversible phase transitions, and cholesteric Grandjean texture. The experimental results demonstrated that the glass transition temperatures and isotropization temperatures of network elastomers decreased as the concentration of crosslinking units was increased, but the cholesteric phase was not disturbed.