Biodegradation of poly(lactic acid)/starch/coir biocomposites under controlled composting conditions

The aim of this work was to investigate the aerobic biodegradation of a composite under controlled composting conditions using standard test methods. Composite was formed by poly(lactic acid) (PLA), with and without the addition of maleic anhydride (MA), acting as coupling agent, thermoplastic starch (TPS) and short natural fibre (coir). For comparison its starting materials, such as TPS and matrix (containing 75 wt% of PLA and 25 wt% of TPS), were also tested.At the end of the incubation period, TPS appeared to be the most bio-susceptible material being totally biodegraded and the matrix showed a higher level of biodegradation (higher amounts of evolved CO₂) than PLA, probably due to the TPS domains preferentially attacked by microorganisms and increasing the percentage of carbon dioxide produced. Fibres seemed to play a secondary role in the process as confirmed by the slight differences in carbon dioxide produced. The compatibilised composite revealed a lower percentage of evolved CO₂ than the uncompatibilised one. Finally, the degradation results were confirmed by thermal properties' changes of tested materials at different incubation times, as monitored by thermal analysis, and by the scanning electron microscopy (SEM) analyses of the compost aged samples. SEM micrographs showed the formation of patterns and cracks on the surface of the materials aged in the compost evidencing a profound loss of structure. Moreover, an extended biofilm (evident also with optical microscopy observation) was detected on the biodegraded materials, thus indicating the growth of a large number of bacteria and fungi on their surfaces.     

Influence of accelerated ageing on the physico-mechanical properties of alkali-treated industrial hemp fibre reinforced poly(lactic acid) (PLA) composites

30 wt% aligned untreated long hemp fibre/PLA (AUL) and aligned alkali treated long hemp fibre/PLA (AAL) composites were produced by film stacking and subjected to accelerated ageing. Accelerated ageing was carried out using UV irradiation and water spray at 50 °C for four different time intervals (250, 500, 750 and 1000 h). After accelerated ageing, tensile strength (TS), flexural strength, Young's modulus (YM), flexural modulus and mode I fracture toughness (K_Ic) were found to decrease and impact strength (IS) was found to increase for both AUL and AAL composites. AUL composites had greatest overall reduction in mechanical properties than that for AAL composites upon exposure to accelerated ageing environment. FTIR analysis and crystallinity contents of the accelerated aged composites support the results of the deterioration of mechanical properties upon exposure to accelerated ageing environment.     

Silkworm silk/poly(lactic acid) biocomposites: Dynamic mechanical, thermal and biodegradable properties

Silkworm silk/Poly(lactic acid) (silk/PLA) biocomposites with potential for environmental engineering applications were prepared by using melting compound methods. By means of Dynamic mechanical analysis (DMA), Differential scanning calorimetry (DSC), Thermogravimetric analysis (TGA), Coefficient of thermal expansion test, Enzymatic degradation test and Scanning electron microscopy (SEM), the effect of silk fiber on the structural, thermal and dynamic mechanical properties and enzymatic degradation behavior of the PLA matrix was investigated. As silk fiber was incorporated into PLA matrix, the stiffness of the PLA matrix at higher temperature (70-160 °C) was remarkably enhanced and the dimension stability also was improved, but its thermal stability became poorer. Moreover, the presence of silk fibers also significantly enhanced the enzymatic degradation ability of the PLA matrix. The higher the silk fiber content, the more the weight loss.     

Effect of small amounts of poly(lactic acid) on the recycling of poly(ethylene terephthalate) bottles

Poly(ethylene terephthalate) (PET) is one of the most used commodity polymers, especially for food and beverage applications, and its recycling is of great importance because of the possible use in the textile and construction industries. On the other hand, the interest in biodegradable polymers has led, in recent years, to the use of materials such as poly(lactic acid) (PLA) also in the food and beverage industry. The presence of small amounts of PLA in the PET waste can significantly affect the post-consumer recycling process. In this work, the effect of the presence of small amounts of PLA on the recycling of PET bottles is investigated by rheological, mechanical, morphological and thermogravimetric analysis. The results indicate that this presence can significantly affect the rheological properties under non-isothermal elongational flow, while the mechanical properties were considerably affected only in some circumstances and the thermal stability was not significantly modified.     

Organically modified rectorite toughened poly(lactic acid): Nanostructures, crystallization and mechanical properties

To improve the toughness of PLA, poly(lactic acid) (PLA)/organically modified rectorite (OREC) nanocomposites were prepared via the melt-extrusion method. A partially exfoliated and partially intercalated structure was confirmed by WAXD and TEM. The crystallization behaviors of neat PLA and nanocomposite were studied by POM and DSC, and it was found that OREC had a great effect on the overall crystallization rate and spherulitic texture of PLA. The presence of OREC could toughen PLA greatly. For example, when 1 wt.% OREC was added, the elongation at break of the nanocomposite was increased to 210%. The toughening mechanism was analyzed through the observation of the inner structure of the tensile test bar using SEM.     

Largely improved toughness of poly(lactic acid) by unique electrospun fiber network structure of thermoplastic polyurethane

Oriented thermoplastic polyurethane (TPU) fiber and fiber network were first prepared by electrospinning. The as-prepared TPU fiber or fiber network was then pre-fixed in poly(lactic acid) (PLA)/TPU composite to improve the toughness of PLA. For comparison purpose, TPU/PLA composites with sea-island morphology were also prepared by traditional solution blending and mechanical blending. The results show that the toughness of PLA is greatly increased by the special pre-fixed oriented TPU fibers even at a low content, and the toughness is further increased by the TPU fiber network. Our results indicate for the first time that the toughening effect of special TPU fibers or fiber network is much better than that of traditional TPU with sea-island morphology. This study provides guidance to largely improve the toughness of PLA by designing the special phase morphology of TPU.     

Enhanced stereocomplex formation of poly(L-lactic acid) and poly(D-lactic acid) in the presence of stereoblock poly(lactic acid)

Stereoblock poly(lactic acid) (sb-PLA) is incorporated into a 1:1 polymer blend system of poly(L-lactic acid) (PLLA) and poly(D-lactic acid) (PDLA) that has a high molecular weight to study its addition effect on the stereocomplex (sc) formation of PLLA and PDLA. The ternary polymer blend films are first prepared by casting polymer solutions of sb-PLA, PLLA, and PDLA with different compositions. Upon increasing the content of sb-PLA in the blend films the sc crystallization is driven to a higher degree, while the formation of homo-chiral (hc) crystals is decreased. Lowering the molecular weight of the incorporated sb-PLA effectively increases the sc formation. Consequently, it is revealed that sb-PLA can work as a compatibilizer to improve the poor sc formation in the polymer blend of PLLA and PDLA.     

XPS and wettability characterization of modified poly(lactic acid) and poly(lactic/glycolic acid) films

Poly(lactic acid) (PLA) and poly(lactic/glycolic acid) copolymers (PLGA) are biodegradable drug carriers of great importance, although successful pharmaceutical application requires adjustment of the surface properties of the polymeric drug delivery system to be compatible with the biological environment. For that reason, reduction of the original hydrophobicity of the PLA or PLGA surfaces was performed by applying a hydrophilic polymer poly(ethylene oxide) (PEO) with the aim to improve biocompatibility of the original polymer. PEO-containing surfaces were prepared by incorporation of block copolymeric surfactants, poly(ethylene oxide)-poly(propylene oxide)-poly(ethylene oxide) (Pluronic), into the hydrophobic surface. Films of polymer blends from PLA or PLGA (with lactic/glycolic acid ratios of 75/25 and 50/50) and from Pluronics (PE6800, PE6400, and PE6100) were obtained by the solvent casting method, applying the Pluronics at different concentrations between 1 and 9.1% w/w. Wettability was measured to monitor the change in surface hydrophobicity, while X-ray photoelectron spectroscopy (XPS) was applied to determine the composition and chemical structure of the polymer surface and its change with surface modification. Substantial reduction of surface hydrophobicity was achieved on both the PLA homopolymer and the PLGA copolymers by applying the Pluronics at various concentrations. In accordance with the wettability changes the accumulation of Pluronics in the surface layer was greatly affected by the initial hydrophobicity of the polymer, namely, by the lactide content of the copolymer. The extent of surface modification was also found to be dependent on the type of blended Pluronics. Surface activity of the modifying Pluronic component was interpreted by using the solubility parameters.     

Synthesis and characterization of poly(lactic acid) and glucosamine-formaldehyde/dodecylbenzenesulfonate composite films

The composite films of poly(lactic acid) (PLA) doped with glucosamine(Gluc)-formaldehyde(FA) polymer/sodium dodecylbenzenesulfonate (SDBS) complexes at 1–5 wt% were synthesized to demonstrate striking improvement of their structural and mechanical properties. The polymer complexes were obtained by the hydrothermal polymerization of Gluc and FA at a molar ratio of 1:2 in the presence of SDBS. The atomic ratios of S in to N in (=S/N) in the polymer complexes limitedly range from 0.52 to 0.69, indicating that the complexation develops through the nonstoichiometric reaction between groups of (Gluc-FA) polymer and ones of SDBS and 31–48% of the groups remain unbound. The PLA composite film doped with 1 wt% (Gluc-FA)/SDBS showed the elongation-at-break of as large as 194% compared with 37% for PLA film, together with an appreciable increase of the crystallites size (D ₂₀₀) of PLA from 21.8 to 33.3 nm.     

Rejuvenation of PLLA: Effect of plastic deformation and orientation on physical ageing in poly(l‐lactic acid) films

Poly(l ‐lactic acid) (PLLA) is a bio‐degradable polyester which exhibits brittle behaviour due to relatively fast physical ageing of the amorphous phase. This work describes the effects of thermal rejuvenation and molecular orientation of the amorphous phase on this physical ageing process. Uniaxial compression testing showed that physical ageing of the amorphous phase increases the yield stress and the associated strain softening response, both contributing to the observed embrittlement of PLLA in tension. Molecular orientation at constant crystallinity was applied by uniaxial and biaxial plastic deformation just above the glass transition temperature, up to plastic strains of 200% to avoid strain‐induced crystallisation. Using stress‐relaxation experiments combined with tensile testing, both as a function of ageing time, it is shown that both uniaxial and biaxial plastic deformation in excess of 150% plastic strain, decelerates and possibly prohibits the physical ageing process. The oriented monofilaments and films have improved mechanical properties such as stiffness, strength and strain‐to‐break, which were not affected by physical ageing during the whole testing period (40 days). In addition, plastic deformation to higher draw ratios and/or higher temperatures strongly enhanced crystallinity and resulted in PLLA monofilaments and films that also exhibited tough behaviour, not affected by physical ageing. © 2016 Wiley Periodicals, Inc. J. Polym. Sci., Part B: Polym. Phys. 2016 , 54, 2233–2244     

Mechanical, thermal and degradation properties of poly(d,l-lactide)/poly(hydroxybutyrate-co-hydroxyvalerate)/poly(ethylene glycol) blend

The mechanical, thermal and biodegradable properties of poly(d,l-lactide) (PDLLA), poly(3-hydroxybutyrate-co-3-hydroxyvalerate) (PHBV) and poly(ethylene glycol) (PEG) blends were studied. The influence of PEG on the tensile and impact strengths of the blends was investigated. The results showed that the toughness and elongation at break of the PDLLA/PHBV (70/30) blends were greatly improved by the addition of PEG, and the notched Izod impact strength increased about 400% and the elongation at break increased from 2.1% to 237.0%. The thermal and degradation properties of the blends were investigated by differential scanning calorimeter (DSC) and thermogravimetric analyzer (TGA), it was found that the thermal stability of PHBV in the presence of PDLLA was improved. The degradation test showed that the addition of PEG could notably accelerate the biodegradation of the blends in the soil at room temperature, and the mass loss is about 20% after 30 days of the storage.     

Effect of poly (lactic acid)‐graft‐glycidyl methacrylate as a compatibilizer on properties of poly (lactic acid)/banana fiber biocomposites

The main aim of this study was to synthesis of poly (lactic acid) (PLA)‐graft‐glycidyl methacrylate (GMA) as well as its influence on the properties of PLA/banana fiber biocomposites. PLA‐graft‐GMA graft copolymer (GC) was synthesized by melt blending PLA with GMA using benzoyl peroxide and dicumyl peroxide as initiators. Graft copolymerization was confirmed by FTIR and ¹H‐NMR spectroscopic studies. PLA/silane treated banana fiber (SiB) biocomposites with various GC concentrations were prepared by melt blending followed by injection molding techniques. The influence of GC content on the mechanical, thermal and moisture resistance properties of the composite was investigated. The addition of 15 wt% GC content in the biocomposite provided optimum tensile and flexural strength, which is attributed to the greater compatibility between fiber and PLA matrix. The thermal properties of biocomposites have been evaluated using thermogravimetric analysis which provided evidence of improved interfacial adhesion between SiB and PLA by the addition of GC. Additionally, GC enhanced the moisture absorption resistance of biocomposites. These results indicated that GC is indeed a good candidate as a compatibilizing agent to improve the compatibility in PLA/fiber biocomposites. Copyright © 2015 John Wiley & Sons, Ltd.     

Radiochemical ageing of poly(ether ether ketone)

Thin (60 μm) and thick (250 μm) samples of poly(ether ether ketone) were subjected to radiochemical ageing at 24 kGy h⁻¹ dose rate for doses up to 30.7 MGy at 60 °C in air. FTIR spectrophotometry (hydroxyl and carbonyl build-up), ATR microscopy (oxidation profiles), ammonia gaseous treatment (determination of carbonyl nature), density, DSC (glass transition temperature, cold crystallization and melting point changes), and gel content measurements (crosslinking) were conducted for examination of polymer degradation. Thin samples were shown to undergo principally chain scission process whereas thick ones undergo mainly crosslinking. This difference can be attributed to the kinetic control of oxidation by oxygen diffusion. A mechanistic scheme was proposed from radiochemical yields estimations.     

Electron transfer in electroactive poly(glutamic acid)

Electroactive biopolymer was synthesized by incorporation of ferrocene moieties onto poly(glutamic acid) polymer chains. In the presence of the electron acceptor methyl viologen dichloride, the ferrocene-containing poly(glutamic acid) exhibits efficient photoinduced electron transfer. This redox-active polymer’s electrocatalytic activity for the decomposition of hydrogen peroxide and ascorbic acid was investigated by using cyclic voltammetry. As for hydrogen peroxide, the reduction peak current shows proportional response to peroxide concentration in the wide range of 10-100 mM; as for ascorbic acid, the oxidation peak current displays linear dependence on the ascorbic acid concentration under 80 mM, which could lead to the electroactive biopolymer’s applications in catalysis, photosensitizer, sensors, etc. The study could offer a strategy for developing environment-friendly electroactive and photoactive biopolymers.     

Thermal and mechanical properties of cationic guar gum/poly(acrylic acid) hydrogel membranes

Novel hydrogel membranes (coded as GA) based on cationic guar gum (CGG) and poly(acrylic acid) (PAA) were synthesized with various feed compositions. Their structure and properties were studied by Fourier transform infrared spectra, scanning electron microscopy, differential scanning calorimetry, thermogravimetric analyses and tensile tests. The structure analyses indicated that there existed strong electrostatic interaction between CGG and PAA, which resulted in uniform structure and complete miscibility between the two components. On the basis of thermogravimetric analyses, the activation energies (E_a) of the first degradation of the membranes increased from 34.5 to 77.1 kJ/mol with an increase of CGG content, while the residual ratios of the membranes increased from 7.6 to 36.1 wt% at 600 °C. This indicated an elevated thermal stability of PAA-based materials through an introduction of CGG. The tensile tests exhibited the mechanical properties of the membranes were improved with an increase of CGG content, and the maximum value of 41.1 MPa was reached.     

Bio-based ethylene-co-vinyl acetate/poly (lactic acid) thermoplastic vulcanizates with enhanced mechanical strength and shape memory behavior

With the increasing attention to the shortage of petroleum resources and environmental pollution, it is more urgent to develop new type biomass-derived and bio-degradability polymer materials. In this study, a various of bio-based ethylene-co-vinyl acetate (EVA)/poly (lactic acid) (PLA) thermoplastic vulcanizates (TPVs) with enhanced mechanical strength and shape memory behavior were prepared. The Fourier transform infrared spectroscopy (FTIR), torque rheometer, swelling equilibrium experiments, and thermal gravimetric analysis (TGA) indicate that the EVA component is more aggressive to the active radicals than PLA component, and the improvement of gel content for EVA component is more than that of PLA component. The scanning electronic microscope (SEM) and transmission electron microscopy (TEM) show that the co-continuous structure of EVA/PLA/AD TPV could be well maintained when the TMPTA was introduced into the multicomponent system. Obviously, the results also exhibit that the improvement of mechanical strength and shape memory behavior for EVA/PLA/AD TPV could be attributed to the increased gel content, especially the gel content of EVA component, without changing the crystallization behavior of EVA/PLA/AD TPV.     

Evaluation of interlaminar fracture toughness and dynamic mechanical properties of nano TiO2 coated flax fibre epoxy composites

In this study, fibre modification technique is performed by coating nano titanium dioxide (TiO₂) particles on flax fibres. The fibre surface is treated with silane coupling agents and coated with nanoparticles at weight percentage 0.2, 0.4, 0.6 and 0.8% to develop chemical bonding at the fibre matrix interface. The improved interface is evaluated by performing Mode I, Mode II interlaminar fracture toughness (ILFT), and Dynamic mechanical analysis (DMA). The results indicate that the fibre modified composites with 0.4 wt % and 0.6 wt % coating shows 37% and 24% improvement in Mode I and Mode II ILFT values respectively. The storage modulus from the DMA analysis also exhibits improvement for the fibre modified composites. SEM analysis explains the changes in the fracture mechanism. FTIR analysis provides the details on the fibre coating by nanoparticles.     

Preparation and thermal characterisation of poly(lactic acid) nanocomposites prepared from organoclays based on an amphoteric surfactant

New polymer-clay nanocomposites composed of poly(lactic acid) and a novel organoclay based on cocamidopropylbetaine (CAB) and sodium montmorillonite (MMT) were prepared by solution casting and characterised by X-Ray Diffraction Analysis (XRDA), Transmission Electron Microscopy (TEM) and Thermogravimetric Analysis (TGA). A similar series of composites based on PLA and Cloisite 30B, a commercially available organoclay, were prepared for comparison. The thermal stability of the CAB-MMT organoclays decreased with increasing surfactant loading. Experimental organoclays with an organic content similar to that of the commercial organoclay were found to be of comparable thermal stability. XRDA analysis of the PLA-organoclay nanocomposites showed that PLA intercalated the gallery space of both types of organoclay to similar extents and the increased spacing was confirmed by TEM. The thermal stabilities of the PLA-organoclay composites based on CAB-MMT were higher than those based on the commercial organoclay.     

Structure and properties of clay nano‐biocomposites based on poly(lactic acid) plasticized with polyadipates

The use of nano‐biocomposites based on plasticized poly(lactic acid) (PLA) has been proposed as a way to improve the polymer ductility and to expand PLA applications window. Novative nano‐biocomposites were elaborated with PLA plasticized by polyadipates (15 wt%) with different molar masses (from 1500 to 2500 Da), with 2.1 wt% of an organo‐modified montmorillonite (O‐MMT). These materials showed enhanced ductility and barrier properties. The clay was swelled in liquid polyadipates prior to their blending with PLA to facilitate chains intercalation and nanofiller exfoliation during melt‐blending. In certain processing conditions, quite homogenous and exfoliated structures were obtained, as shown by X‐ray diffraction (XRD) and transmission electronic microscopy (TEM) results. Irrespective of the average molar mass of the polyadipate, the clay addition induced a reduction in around 25% in oxygen transmission rate (OTR) without an important detriment in tensile properties. Nano‐biocomposites prepared with higher molar masses polyadipates showed the highest thermal stability as well as the lowest OTR, resulting in very promising and novative materials for different applications such as soft packaging. Copyright © 2010 John Wiley & Sons, Ltd.     

Thermal, ozone and gamma ageing of styrene butadiene rubber and poly(ethylene-co-vinyl acetate) blends

Ageing behaviour of SBR/EVA blends due to the effects of heat, ozone, and gamma radiation was studied with reference to blend ratio, three crosslinking systems (sulfur, peroxide and mixed) and a compatibiliser (SEBS-g-MA). It was found that an increase in the EVA content of the blends enhanced the ageing characteristics. Among the different crosslinking systems, a peroxide cured system exhibited the best retention of properties even after severe ageing. Tensile strength of peroxide cured SBR/EVA blends increased slightly after ageing for three days at 70 °C due to continued crosslinking, whereas tensile strength of all blends decreased on ageing at 100 °C. Compatibilisation with SEBS-g-MA improved the thermal, gamma and water ageing resistance of SBR/EVA blends.