Porosity development in chars from thermal degradation of poly(p-phenylene benzobisoxazole)

The main objective of this work was to investigate porosity development in carbonaceous materials formed by thermal degradation of the high thermal stability polymer, poly(p-phenylene benzobisoxazole) (PBO). Two varieties of PBO, as-spun (AS) and high-modulus (HM) were studied. Chars obtained at various polymer decomposition temperatures (selected on the basis of thermogravimetric and differential thermal analysis results) were characterized by elemental analysis, infrared spectroscopy, X-ray diffraction and CO₂ adsorption at 273 K. The obtained adsorbents essentially contained narrow micropores, and maximum pore development took place at ca. 1000 K, when the polymer was not yet completely decomposed. At higher temperatures, there is a certain pore widening along with a displacement towards smaller pore sizes, and the pore volume significantly decreases.     

Mechanical and thermal properties of syndiotactic polystyrene blends with poly(p-phenylene sulfide)

Melt blends of syndiotactic polystyrene (sPS) and poly(p-phenylene sulfide) (PPS) have been prepared by using an internal mixer at 300 °C. The thermal, mechanical and morphological properties of binary blends of sPS with PPS have been investigated in this paper. The thermal and morphological properties show the immiscible binary blend evidences, which have a clear phase separation between the components at all compositions and a lack of adhesion at the interface. According to the X-ray diffraction patterns of blends, the crystalline structure of sPS in the blend is not altered from α form to β form. Indeed, the results for tensile test reveal that there is no synergism of the modulus of elasticity for sPS/PPS blend system.     

Fluorination of poly(p-phenylene) using TbF4 as fluorinating agent

The fluorination using TbF₄ as fluorinating agent was successfully performed on poly(p-phenylene). The method allows the fluorine content of the polymer to be controlled and the formation of structural defects, such as dangling bonds, to be significantly decreased by comparison with the direct fluorination using pure F₂ gas. The aromatic character of the phenyl ring is partly maintained through the fluorination contrary to the direct fluorination (using pure F₂ gas), for which a quasi-perfluorination and a partial decomposition of the polymer occur. Complementary analytical techniques have been used, such as ¹⁹F and ¹³C solid state NMR, FT-IR and EPR to compare the samples as a function of the reaction conditions.     

A study of the surface morphology of poly(p-phenylene terephthalamide) chars using scanning probe microscopy

The objective of this work was to investigate the changes in surface morphology associated with thermal degradation of poly(p-phenylene terephthalamide) (PPTA) into chars. To this end, PPTA samples decomposed at several temperatures up to 800 °C were studied on a local scale using atomic force microscopy (AFM) and scanning tunnelling microscopy (STM). Domains with a diameter of 40-50 nm started appearing among PPTA nanofibrils at about 500 °C. At this temperature and above, a film coating the fibre developed. This layer was much less rigid than PPTA, and remained deposited on the fibres, even at high temperatures. At 800 °C, the STM images showed a surface distribution typical of a carbonaceous material, isotropic although somewhat heterogeneous. When an intermediate isothermal step (500 °C, 200 min) was introduced along with heat treatment of PPTA under a constant rate, the material obtained at the end of this step was conductive enough to be studied by STM. Although the coating over the fibres also remained after the isothermal step, it was less homogeneous than in the absence of isothermal treatment. On further heating, the residue exhibited a surface morphology typical of a carbonaceous material, but much more homogeneous and isotropic than in the absence of the isothermal step.     

Synthesis of oligo(p-phenylene vinylene)-porphyrin-oligo(p-phenylene vinylene) triads as antenna molecules for energy transfer

The oligo(p-phenylene vinylene)-porphyrin-oligo(p-phenylene vinylene) (P-OPVn, n=2, 4, where n is the number of phenyl rings) and the complex with Zn²⁺ based on P-OPVn were synthesized for investigating their photophysical properties via UV-vis, voltammetry, steady-state and time-resolved fluorescence spectra. In these molecules two OPV moieties as energy donors were linked to porphyrin center by virtue of Wittig reaction. The detailed studies of photophysical properties indicate that OPV group can act as an antenna unit for effective intramolecular energy transfer.     

Synthesis of poly(p-phenylene)s having alternating sugar and alkyl substituents by Suzuki coupling polymerization and evaluation of their main-chain conformations

This paper reports synthesis of poly(p-phenylene)s (PPPs) having alternating sugar and alkyl substituents by Suzuki coupling polymerization of a 1,4-dibromobenzene monomer having peracetylated glucose residues with a 1,4-benzene bis(boronic acid) having alkyl chains using Pd(PPh₃)₄ in a mixed solvent of THF and NaHCO₃ aq. at reflux temperature. The polymerization proceeded with the progress of frequent deacetylation, and thus, the crude product was acetylated, followed by the isolation procedures, giving the PPP having alternating peracetylated glucose and alkyl substituents. The structure of the isolated product was confirmed by the ¹H and ¹³C NMR measurements to be the desired PPP derivative. The M_n values were estimated by GPC analysis with DMF as the eluent to be 5400-12,700. The deacetylation of the polymer completely took place using sodium methoxide in methanol/THF. The conformation of the main-chain was evaluated by the CD spectrum in comparison with that of PPP only with the glucose substituents, indicating that the present PPP derivative had the flexible nature of the main-chain by introduction of the alkyl-substituted units between glucose-substituted units. The Suzuki coupling of a 1,4-dibromobenzne monomer having disaccharide substituents with the benzene bis(boronic acid) monomer was also performed under the similar conditions. The product was precipitated from the reaction mixture, which was simply isolated by filtration. The isolated polymer was purified further by reprecipitation into diethyl ether and its structure was a PPP having free disaccharide or monosaccharide residues. This indicated occurrence of complete deacetylation as well as partial degradation of the glycosidic linkages in the disaccharides during the polymerization. The main-chain of the obtained polymer had also the flexible nature. The fluorescence spectra of the obtained PPP derivatives in this study were also measured.     

New confined p-phenylenevinylene (PPV)-type polymer analogue of poly(phenylene sulfide)

A new confined p-phenylenevinylene (PPV)-type polymer (PPVS) has been synthesized using Wittig condensation. The chemical structure of the polymer was well defined by ¹H NMR, ¹³C NMR, and FTIR spectroscopic analysis. PPVS contains oligomeric PPV units separated by sulfide bridges in the main chain; it is fully soluble in common organic solvents and has a number-average molecular weight of 3500 g mol⁻¹. Thermogravimetric analysis and differential scanning calorimetry indicate that PPVS is amorphous, stable up to 360 °C in air and displays a glass transition temperature of 98 °C. The optical properties of the polymer were investigated by UV-visible absorption and photoluminescence spectroscopies. The polymer film absorbs at 375 nm and emits at 517 nm with a narrow emission spectrum. From the cyclic voltammetry analysis, the electrochemical bandgap was estimated to be 2.78 eV. A single-layer diode device of the configuration indium-tin oxide/PPVS/aluminium has been fabricated and has a relatively low turn-on voltage of 3.4 V. An electroluminescent emission similar to photoluminescence is demonstrated in a multilayer device.     

Kinetics of thermal degradation and thermal oxidative degradation of poly(p-dioxanone)

The kinetics of the thermal degradation and thermal oxidative degradation of poly(p-dioxanone) (PPDO) were investigated by thermogravimetric analysis. Kissinger method, Friedman method, Flynn-Wall-Ozawa method and Coats-Redfern method have been used to determine the activation energies of PPDO degradation. The results showed that the thermal stability of PPDO in pure nitrogen is higher than that in air atmosphere. The analyses of the solid-state processes mechanism of PPDO by Coats-Redfern method and Criado et al. method showed: the thermal degradation process of PPDO goes to a mechanism involving random nucleation with one nucleus on the individual particle (F₁ mechanism); otherwise, the thermal oxidative degradation process of PPDO is corresponding to a nucleation and growth mechanism (A₂ mechanism).     

A facile approach to preparation of long-chain-branched poly(p-dioxanone)

Long-chain-branched poly(p-dioxanone)s (LCB-PPDOs) with different branch densities were prepared via the chain-extending reaction of hydroxyl group terminated linear bi-functional PPDO (2a-PPDO) and star-like tri-functional PPDO (3a-PPDO) prepolymers, which were synthesized by the ring-opening polymerization of p-dioxanone (PDO) using 1,4-butanediol (BD) and trimethylolpropane (TMP) as multi-functional initiators, respectively. The undesirable gelation was successfully depressed by adjusting the chain length and feed ratio of prepolymers. The average molecular weight between branch points (M_b) and the average number of branch per 100,000 g/mol (B_n) of LCB-PPDOs were calculated from the ¹H NMR spectra. The average number of branch ranged from 0 to 6.72 branch points per 100,000 g/mol, and the number-average molecular weights between branch points ranged from 6900 to 20,500 g/mol. The results of differential scanning calorimetry (DSC) showed that the crystallization behavior of LCB-PPDOs was changed evidently with the branch density. Small-amplitude dynamic oscillatory rheometer was used to investigate the rheological properties of the melts of LCB-PPDO including zero-shear viscosity, storage modulus, relaxation times and loss angle, which largely depended on the branch density and length of LCB-PPDOs. Therefore, the rheological behaviors of PPDO can be well-controlled via synthesizing LCB-PPDOs with the desired architectures.     

Morphology and structure of poly(p-dioxanone)

The morphology of solution grown single crystals of poly(p-dioxanone) was investigated. Different crystallization conditions (solvent, precipitant agent and temperature) were tested. Dendritic growth, screw dislocations and striations were observed. Crystals usually exhibited a lozenge morphology, whose apex angle changed with the crystallization conditions. In all cases, however, a single crystal electron diffraction pattern was recorded. Spherulitic morphologies were obtained by evaporation of formic acid solutions. Lamellae gave rise to well resolved electron diffraction patterns that allowed determination of the main packing characteristics. Patterns of tilted specimens helped establish an orthorhombic unit cell, whose parameters indicate a deviation from the all trans molecular conformation. Quantum mechanical calculations were performed on small model compounds to study the conformational preferences. Simulated diffraction patterns were consistent with a unit cell containing four repeat units and a P2₁2₁2₁ space group. Molecular packing suggests the existence of different kinds of folds for an assumed adjacent reentry. Polyethylene decoration hardly highlighted a crystal sectorization. Also enzymatic degradation of lamellar crystals was evaluated by using a Pseudomonas cepacia lipase.     

Vibration and X-ray photoelectron spectroscopies of FeCl3-doped poly(p-diethynylbenzene)

The doping mechanism of poly(p-diethynylbenzene), chemically doped with FeCl₃, was investigated. Absorption, infrared, far infrared, Raman, X-ray photoelectron spectroscopies were used to determine the nature of the dopant in doped polymer. The experimental results suggest that the charge transfer reaction between the polymer chain and the dopant results in the formation of FeCl₄⁻ species, the π electron charge delocalization along the polymeric chain and the reduction of π-π^* transition energy.     

Swelling studies of crosslinked poly(p-phenylene terephthalamide) copolymers in sulfuric acid

In an attempt to improve the mechanical properties of extended chain polymers such as poly(p-phenylene terephthalamide) (PPTA), a crosslinkable terephthalic acid derivative (XTA) has been developed which can be incorporated into copolymers in various concentrations and activated after polymerization. The crosslinking of PPTA-co-XTA copolymer particles was investigated through a series of swelling experiments in concentrated H₂SO₄. The data show a systematic decrease in equilibrium swelling with increasing XTA content, indicating the XTA units are in fact acting as crosslink sites. Values for crosslink density were calculated from the Flory-Rehner theory of polymer swelling and compared with previous findings on crosslinked rigid polymer network systems. The effective number of crosslinks per XTA unit (efficiency) predicted by the Flory-Rehner theory increases and then decreases with % XTA. The decrease in crosslinking efficiency at high XTA concentrations is consistent with differential scanning calorimetry data which show the enthalpy of XTA reaction decreasing slightly with % XTA. The deviations at low % XTA may represent a failure of the Flory-Rehner theory to properly describe the rubbery elasticity of extended chain polymers. © 1994 John Wiley & Sons, Inc.     

A new approach to prepare high molecular weight poly(p-dioxanone) by chain-extending from dihydroxyl terminated propolymers

As poly(p-dioxanone) (PPDO) with a high molecular weight (viscosity-average molecular weight (M_ν) > 100,000 g/mol) is not easy to be obtained in a short time, a new approach has been developed to produce high molecular weight poly(p-dioxanone) (HPPDO-T) by chain-extending reaction of hydroxyl-terminated PPDO (HPPDO) prepolymers using toluene-2,4-diisocyanate (TDI) as chain extender. Here HPPDO prepolymers were synthesized via ring-opening polymerization of p-dioxanone (PDO) monomer initiated by 1,4-butanediol (BD) with Stannous octoate (SnOct₂) as catalyst. The resulting polymers, having a highest M_ν of 250,000 g/mol, were characterized by ¹H NMR, TG, DSC and WXRD. HPPDO prepolymers can react with TDI more effectively than the PPDO prepolymers initiated by mono-functional initiators, and the molecular weights of resulting chain-extended products increase several decade times in an hour comparing to the prepolymers. The chain extended products HPPDO-T have better thermal stability, and higher glass transition temperatures and lower crystallization rates than PPDO homopolymer.     

X-ray diffraction study of poly(p-phenylene terephthalamide) fibres

On the basis of an X-ray diffraction study, a model is proposed for the crystal and molecular structure of poly(p-phenylene terephthalamide). The monoclinic (pseudo-orthorhombic) unit cell [$\text{a = 7·87}\text{A}\text{?}\text{, b = 5·18}\text{A}\text{?}\text{, c (}\text{fibre axis}\text{) = 12·9}\text{A}\text{?}\text{and}\text{γ = 90°}$] possesses Pn or P2₁/n space-group symmetry. Two molecular chains pass through the cell, one through the centre and the other through a corner. Approximate values for the orientation angles between the phenylene planes and the amide planes are 38° for the p-phenylene diamine segment and -30° for the terephthalic segment. Hydrogen bonds are formed between adjacent chains lying in the (100) plane. The conformation of the chain is primarily governed by competitive intramolecular interactions between the conjugated groups.     

Nonisothermal crystallization and melting behavior of the copolymer derived from p-dioxanone and poly(ethylene glycol)

Nonisothermal crystallization and melting behaviors of poly(p-dioxanone)(PPDO)-b-poly(ethylene glycol)(PEG) with mole ratios of 80:20 and 30:70, has been studied by differential scanning calorimeter using various cooling rates. Crystallization behavior of each crystallizable segments of the copolymer was compared with the corresponding segment of homopolymer. For a given composition, the crystallization process began at higher temperature when the slower scanning rates were used. The kinetics of the PPDO segments and the PEG segments in the copolymers under nonisothermal crystallization conditions were analyzed by Ozawa equation and also the crystallization results of the copolymer segments were compared with the corresponding homopolymers. The results showed that the Ozawa equation fails to describe the whole crystallization process of the copolymer segments along with PPDO homopolymer, but describes the crystallization behavior of the PEG homopolymer. Crystallization activation energy and absolute crystallinity values were estimated from the cooling scans (using Kissinger’s method) and fusion endotherms of the subsequent heating scans, respectively.     

Synthesis and properties of novel poly(p-phenylenevinylene) copolymers for near-infrared emitting diodes

A series of novel near-infrared (NIR) electroluminescence (EL) copolymers based on a host poly(p-phenylenevinylene) (PPV) derivative of poly(2-methoxy-5-octyloxy-p-phenylenevinylene) (PMOPV) with different content of narrow band-gap (NBG) unit 4,7-bis(2-thienyl)-2,1,3-benzothiadiazolevinylene (DBTV) or 4,7-bis(2-thienyl)-2,1,3-benzoselenadiazolevinylene (TBSV) was prepared by Stille coupling reaction. All the copolymers are soluble in common organic solvents, most of which emit NIR light accompanied by gradually red-shifting with increasing the content of the NBG units. The peak EL emission of the copolymers with around 30% TBSV content is at about 800 nm.     

Thermal degradation of poly(p-phenylene-graft-?-caprolactone) copolymer

The thermal degradation of poly(p-phenylene-graft-?-caprolactone) (PPP), synthesized by Suzuki polycondensation of poly(?-caprolactone) (PCL) with a central 2,5-dibromo-1,4-benzene on the chain with 1,4-phenylene-diboronic acid, has been studied via direct pyrolysis mass spectrometry. The thermal degradation occurred mainly in two steps. In the first step, decomposition of PCL chains occurred. A slight increase in thermal stability of PCL chains was noted. In the second stage of pyrolysis, the decomposition of the polyphenylene backbone takes place. The evolution of CL monomer or small CL segments left on the phenyl ring continued also in the temperature region where degradation of PPP backbone started.     

Novel conjugated polymer poly(benzobisoxazole-2,6-diylvinylene): synthesis and evidence of aggregate formation in methanesulfonic acid

A new conjugated polymer poly(benzobisoxazole-2,6-diylvinylene) (PBOV) has been synthesized as an analogue of poly(p-phenylene benzobisoxazole) (PBO). The comparison between PBOV and PBO has been carried out by Fourier transform infrared spectroscopy, thermogravimetric analysis, UV, and photoluminescence (PL) spectroscopy. The UV absorption peaks, PL excitation and emission wavelengths of PBOV have a significant red-shift due to the better electronic delocalization. Similar to PBO, it can be observed in the PL spectra of PBOV at various concentrations in methanesulfonic acid (MSA) that the intensity of emission was depressed and the highly structured emission spectra gradually changed to featureless, red-shifted, and broad spectra with increasing concentration. The change in emission spectra can be attributed to the existence of the interchain aggregates, although PBOV does not show highly ordered structure as PBO does.     

Complexation between poly(N,N-diethylacrylamide) and poly(acrylic acid) in aqueous solution

The complexation between poly(N,N-diethylacrylamide) (PDEA) and poly(acrylic acid) (PAA) in aqueous solution was studied by viscometric, potentiometric, and fluorescence techniques. It was found that an interpolymer complex formed between the two polymers through hydrogen bonding interactions with the stoichiometry of r=0.6 (r is unit molar ratio of PAA/PDEA), and the complex formation show the dependence on pH values. The phase behaviour studies showed that the lower critical solution temperature of the PDEA-PAA aqueous solution gradually increased with the increasing of r from 0.01 to 0.15, until a soluble system in the whole temperature region was obtained, which remained in the range of r=0.15-0.3. At higher PAA concentrations, when r is above 0.3, the system appeared phase separation, and almost no temperature dependence was observed. Based on these conclusion and structure characteristics of PDEA and PAA, a model containing only short sequences of monomer residues was proposed for the structure of PDEA-PAA complex.