Development of different temoporfin-loaded invasomes—novel nanocarriers of temoporfin: Characterization, stability and in vitro skin penetration studies

A previous study revealed that the invasome dispersion containing 3.3% (w/v) ethanol and 1% (w/v) of the terpene mixture (cineole:citral:d-limonene = 45:45:10, v/v = standard mixture) could significantly enhance skin penetration of the highly hydrophobic photosensitizer temoporfin (mTHPC). Invasomes enhanced mTHPC-deposition in stratum corneum (SC) compared to liposomes without terpenes and conventional liposomes, and they were efficient in delivering mTHPC to deeper skin layers [J. Control. Release 127 (2008) 271–280]. The aim of this study was to develop new mTHPC-loaded invasomes in order to further enhance the drug penetration. The ratio between d-limonene, citral and cineole was varied in the standard terpene mixture and also single terpenes were used. As a result new mTHPC-loaded invasome dispersions were prepared, characterized and investigated for stability and in vitro penetration of mTHPC into abdominal human skin using Franz diffusion cells.Invasomes were of a small particle size (<150 nm), high homogeneity (<0.3), mostly unilamellar and spherical, but also deformed vesicles were detected. Invasomes containing 1% (w/v) cineole provided the highest skin penetration enhancement of mTHPC, i.e. they provided high amounts of mTHPC in the SC and deeper skin layers, indicating that also incorporation of a single terpene into invasomes could provide efficient nanocarriers of mTHPC. These invasomes could be considered as a promising tool for delivering the photosensitizer mTHPC to the skin.However, in contrast to most invasomes, being effective nanocarriers of mTHPC, there were also formulations less effective than liposomes containing 3.3% (w/v) ethanol and one formulation was less efficient than conventional liposomes.     

氨基糖衍生物二丁基锡配合物的合成、结构表征和生物活性

分别由2-[(2Z)-3-羧基-1-氧代-2-丙烯基]氨基-2-脱氧-1,3,4,6-四-O-乙酰基-β-D-吡喃葡萄糖(1a), 2-[(2-羧基苯甲酰基)氨基]-2-脱氧-1,3,4,6-四-O-乙酰基-β-D-吡喃葡萄糖(2a)和氧化二正丁基锡反应合成了两个新化合物双-{2-[(2Z)-3-羧基-1-氧代-2-丙烯基]氨基-2-脱氧-1,3,4,6-四-O-乙酰基-β-D-吡喃葡萄糖}-二正丁基锡酯(1)和双-{2-[(2-羧基苯甲酰基)氨基]-2-脱氧-1,3,4,6-四-O-乙酰基-β-D-吡喃葡萄糖}-二正丁基锡酯(2), 并经红外光谱、核磁共振(¹H, ¹³C NMR)、质谱初步确定了其结构. 体外抗肿瘤活性结果表明, 化合物1对人肺癌细胞株A-549和人肝癌细胞株BEL-7402的细胞毒活性显示为强效; 而对小鼠白血病细胞株P388和人白血病细胞株HL-60的细胞毒活性为弱效. 化合物2对肿瘤细胞株HL-60, A-549和BEL-7402具有强效的细胞毒活性; 而对肿瘤细胞株P388的作用则为弱效. 克隆基因分析表明化合物1和2在3.82×10^－6 和 3.02×10^－6 mol/L均具有造血细胞毒性.     

Development of a HPLC method for determination of four UV filters in sunscreen and its application to skin penetration studies

This study describes the development, validation and application of a high‐performance liquid chromatography (HPLC) method for the simultaneous determination of the in vitro skin penetration profile of four UV filters on porcine skin. Experiments were carried out on a gel‐cream formulation containing the following UV filters: diethylamino hydroxybenzoyl hexyl benzoate (DHHB), bis‐ ethylhexyloxyphenol methoxyphenyl triazine (BEMT), methylene bis‐ benzotriazolyl tetramethylbutylphenol (MBBT) and ethylhexyl triazone (EHT). The HPLC method demonstrated suitable selectivity, linearity (10.0–50.0 μg/mL), precision, accuracy and recovery from porcine skin and sunscreen formulation. The in vitro skin penetration profile was evaluated using Franz vertical diffusion cells for 24 h after application on porcine ear skin. None of the UV filters penetrated the porcine skin. Most of them stayed on the skin surface (>90%) and only BEMT, EHT and DHHB reached the dermis plus epidermis layer. These results are in agreement with previous results in the literature. Therefore, the analytical method was useful to evaluate the in vitro skin penetration of the UV filters and may help the development of safer and effective sunscreen products.     

Films based on chitosan polyelectrolyte complexes for skin drug delivery: Development and characterization

Novel chitosan based polyelectrolyte complexes (PEC) were developed and optimized in order to obtain films possessing the optimal functional properties (flexibility, resistance, water vapour transmission rate and bioadhesion) to be applied on skin. The development was based on the combination of chitosan and two polyacrylic acid (PAA) polymers with different crosslinkers and crosslinking densities. The interaction between the polymers was maximized controlling the pH, and by forming the films at a pH value close to the pK_a of the respective components as identified by potentiometric and turbidimetric titrations. The action of glycerol, PEG200, Hydrovance and trehalose upon the functional properties of the films was also evaluated. Glycerol was found to improve the film properties in terms of flexibility, resistance and water vapour transmission rate (WVTR) with a maximum effect at 30%. The application of a pressure sensitive adhesive (PSA) significantly improved bioadhesion with a negligible influence in the resistance and flexibility of the films.The optimized film, including adhesive, has shown very good properties for application in the skin and represents a very promising formulation for further incorporation of drugs for topical and transdermal administration.     

新型四氢萘类化合物合成及体外抗真菌活性研究

根据真菌羊毛甾醇14α-去甲基化酶的三维结构模型设计、合成了48个新型四氢萘类化合物, 所有化合物的结构经过IR, ¹H NMR和MS确证. 体外抗真菌活性研究表明所有化合物对7种临床致病真菌都有抗真菌活性, 特别是化合物18, 21, 22, 24的抗真菌活性最强. 对接研究显示设计的先导化合物与靶酶活性腔中氨基酸功能残基结合, 作用模式不同于氮唑类化合物. 结果表明新型四氢萘类化合物是一类全新结构类型的抗真菌化合物.     

Development and validation of HPLC method for imiquimod determination in skin penetration studies

A simple, rapid and sensitive analytical procedure for the measurement of imiquimod in skin samples after in vitro penetration studies has been developed and validated. In vitro penetration studies were carried out in Franz diffusion cells with porcine skin. Tape stripping technique was used to separate the stratum corneum (SC) from the viable epidermis and dermis. Imiquimod was extracted from skin samples using a 7:3 (v/v) methanol:acetate buffer (100 mM, pH 4.0) solution and ultrasonication. Imiquimod was analyzed by HPLC using C(8) column and UV detection at 242 nm. The mobile phase used was acetonitrile:acetate buffer (pH 4.0, 100 mM):diethylamine (30:69.85:0.15, v/v) with flow rate 1 mL/min. Imiquimod eluted at 4.1 min and the running time was limited to 6.0 min. The procedure was linear across the following concentration ranges: 100-2500 ng/mL for both SC and tape-stripped skin and 20-800 ng/mL for receptor solution. Intra-day and inter-day accuracy and precision values were lower than 20% at the limit of quantitation. The recovery values ranged from 80 to 100%. The method is adequate to assay imiquimod from skin samples, enabling the determination of the cutaneous penetration profile of imiquimod by in vitro studies.     

Lipophilic peptide nucleic acids containing a 1,3-diyne function: synthesis, characterization and production of derived polydiacetylene liposomes

Adenine-, cytosine- and thymine-containing peptide nucleic acid (PNA) monomers have been synthesized in which either diacetylenic or stearoyl moieties are attached to the N-or C-terminus; the diacetylenic group is embedded within a long hydrocarbon chain. A range of analogous lipophilic functionalized PNA oligomers have been prepared using either solid phase synthesis or a post-synthetic solution phase procedure following cleavage of the PNA oligomer from the solid support. Selected functionalized PNA monomers and oligomers have been incorporated into liposomal polydiacetylenes and characterized by UV-vis absorption spectroscopy. Preliminary investigations show that blue PDA-liposomes containing thymine-based PNAs can be formed and that production of liposomes with other PNA systems are viable.     

Impact and mechanism of TiO2 nanoparticles on DNA synthesis in vitro

The impact of TiO₂ nanoparticles on DNA synthesis in vitro in the dark and the molecular mechanism of such impact were studied. The impact of TiO₂ nanoparticles on DNA synthesis was investigated by adding TiO₂ nanoparticles in different sizes and at various concentrations into the polymerase chain reaction (PCR) system. TiO₂ nanoparticles were premixed with the DNA polymerase, the primer or the template, respectively and then the supernatant and the precipitation of each mixture were added into the PCR system separately to observe the impact on DNA synthesis. Sequentially the interaction between TiO₂ nanoparticles and the DNA polymerase, the primer or the template was further analyzed by using UV-visible spectroscopy and polyacrylamide gel electrophoresis (PAGE). The results suggest that TiO₂ nanoparticles inhibit DNA synthesis in the PCR system in the dark more severely than microscale TiO₂ particles at the equivalent concentration and the inhibition effect of TiO₂ nanoparticles is concentration dependent. The molecular mechanism of such inhibition is that in the dark, TiO₂ nanoparticles interact with the DNA polymerase through physical adsorption while TiO₂ nanoparticles do with the primer or the template in a chemical adsorption manner. The disfunction levels of the bio-molecules under the impact of TiO₂ nanoparticles are in the following order: the primer > the template > the DNA polymerase. Supported by the National Natural Science Foundation of China (Grant Nos. 50572074 & 50673078), the Shanghai Key Fundamental Project (Grant No. 06JC14068) and the Innovation Program of Shanghai Municipal Education Commission (Grant No. 08ZZ21)     

Self-aggregated nanoparticles from linoleic acid modified carboxymethyl chitosan: Synthesis, characterization and application in vitro

The purpose of the present research work was to study the formation of linoleic acid (LA) modified carboxymethyl chitosan (LCC). Another objective was to evaluate effect of linoleic acid degree of substitution on loading capacity (LC), ADR loading efficiency (LE) and in vitro release profile of LCC nanoparticles. The hydrogel nanoparticles can be prepared using linoleic acid modified carboxymethyl chitosan (LACMCS) after the sonication. The critical aggregation concentration (CAC) of the self-aggregate of LA modified CMCS (LCC) was determined by measuring the fluorescence intensity of the pyrene as a fluorescent probe. The CAC values were in the range of 0.061–0.081 mg/mL. Self-aggregated nanoparticles exhibited an increased LC and LE, decreased sustained release with an increasing ratio of the hydrophobic LA to hydrophilic CMCS. LCC nanoparticles loaded with ADR exerted in vitro anticancer activity against Hela cells that was comparable to the activity of free (non-entrapped in nanoparticles) ADR.     

CaF2对硅酸三钙的制备及其生物活性的影响

采用固相反应制备不同CaF掺量的生物活性硅酸三钙(3CaO·SiO22,C3S),并研究CaF2对C3S的制备及生物活性的影响.化学滴定、TGA/DTA、XRD、SEM和FTIR的分析结果表明,在煅烧过程中,CaF2有效的促进CaCO3的分解,并能形成低共熔化合物,促进C3S的形成;存急冷过程中,CaF2抑制CS晶型转变和分解,CaF2有效提高固相反应制备C§的纯度;模拟体液(SBD浸泡实验结果表明掺与小掺CaF2的C3s表面分别在1 d和3 d内诱导形成诱导磷厌石,这表明掺CaF2可以提高C3S的生物活性.     

Evaluation of the stability of ethanol in water certified reference material: measurement uncertainty under transport and storage conditions

This study simulated the transport and storage conditions of ethanol in water certified reference material (CRM) produced by the Chemical Metrology Division of Inmetro—DQUIM with the purpose of estimating the measurement uncertainty related to stability. The short-term stability study was performed on five different mass fractions (w) in terms of mg ethanol/g solution of the ethanol in water CRM. The nominal values are w = 0.5, 0.9, 1.1, 3.8 and 4.6 mg/g, at temperatures of 4 and 60 °C. On the other hand, the long-term stability study was developed on four different mass fractions (nominal values): w = 0.5, 0.9, 1.1 and 4.6 mg/g, at a temperature of 20 °C. This paper will show the data from the long-term stability study that took place over 52 weeks. The method used complies with ISO Guide 35, the BCR Guideline for Feasibility Studies and ISO Guide 34. According to the statistical parameters used in both studies, the stability of ethanol in water CRM was confirmed for all of the mass fractions studied.     

表面图案化磁性复合微球的原位制备与表征

采用反相悬浮聚合法合成了丙烯酸(AA)含量不同的N-异丙基丙烯酰胺-丙烯酸共聚物P(NIPAM-co-AA)微凝胶, 并以其作为微反应器, 通过原位外源沉积法制备了一系列微米级、表面具有图案化结构的SiO₂-Fe₃O₄-P(NIPAM-co-AA)磁性复合微球. 实验结果表明, 复合微球的表面结构与微凝胶的组成、Fe₃O₄和SiO₂的沉积量有关. 在微球表面进行修饰, 可得到表面带有氨基等官能基团的磁性复合材料. 将这种功能化磁性微球用于识别生物大分子并进一步用于生物医学领域具有重要的意义.     

α-Tocopherol-loaded Ca-pectinate microcapsules: Optimization, in vitro release, and bioavailability

We used response surface methodology to optimize microcapsule preparation conditions, including the ratio of pectin:α-tocopherol (TP) (X₁), emulsifier concentration (X₂), and CaCl₂ concentration (X₃) for maximal entrapment efficiency (EE) of TP-loaded Ca-pectinate microcapsules. The values of X₁, X₂, and X₃, optimized for maximal EE were a ratio of 9.7:6.3, and 1.33% and 5.09%, respectively. The experimental results obtained from the optimum formulation agreed with the predicted results, indicating the usefulness of models for EE. TP release from the Ca-pectinate microcapsules prepared according to the optimized conditions was slow and incomplete in simulated gastric fluid, whereas it was relatively rapid and considerably sustained in simulated intestinal fluid. An in vivo release study revealed that physical entrapment of TP within Ca-pectinate microcapsules can be a good technique to demonstrate the sustained release pattern of TP and to improve the bioavailability for TP following oral administration.     

20 （S） -20-O- Camptothecin β-Aminopropionate： Novel Synthesis and Antitumor Activity in vitro

IntroductionCamptothecin(CPT,1, Scheme 1), a pentacyclicalkaloid isolated from theCamptotheca acuminatebyWallet al. in 1966, shows a broad-spectrum antitumoractivity[1]. However, because of its lowwater solubilityand high toxicity, its clinical applicatio…     

氯化镨对原代培养的小鼠成骨细胞增殖、分化和矿化功能的影响

采用噻唑蓝(MTT)法、碱性磷酸酶(ALP)比活性测定、油红O染色、I型胶原测定以及矿化结节染色及定量分析等方法 ,研究了不同浓度的氯化镨对原代培养的成骨细胞增殖、分化、矿化功能以及横向分化为脂肪细胞的影响。结果表明:氯化镨对成骨细胞增殖、分化、矿化功能以及横向分化为脂肪细胞的影响与作用浓度和时间密切相关,但没有呈现出时间和剂量依赖性。结果提示,氯化镨对骨代谢的影响是复杂的,其具有保护还是损害作用取决于作用浓度和时间。作用浓度和时间是影响氯化镨生物效应转变的关键因素。     

Interaction of Na2B12H11SH with liposomes: Influence on zeta potential and particle size

The interaction of Na₂B₁₂H₁₁SH (BSH) with liposomes has been studied. BSH is a compound used clinically in boron neutron capture therapy of glioblastoma, and is known to enter tumor cells. Liposomes were used as a model for studying the interaction of BSH with cell membranes. BSH led to changes in the zeta potential of liposomes consisting of DODAB (dioctadecyldimethylammonium bromide) alone or with DOPC (dioleylphosphatidylcholine) or DOPE (dioleylphosphatidylethanolamine). It also led to changes of the size of DODAB liposomes, with a maximum size at small zeta potentials. A firm binding of BSH with the head groups of the lipid must be assumed.     

Universal liposomes: preparation and usage for the detection of mRNA

Dye-encapsulating liposomes can serve as signaling reagents in biosensors and biochemical assays in place of enzymes or fluorophores. Detailed here is the use and preparation of streptavidin-coupled liposomes which offer a universal approach to biotinylated target detection. The universal approach provides two advantages, i.e. only one type of liposome is necessary despite varying target and probe sequences and the hybridization event can take place in the absence of potential steric hindrance occurring from liposomes directly conjugated to probes. One objective of this work was to optimize the one-step conjugation of SRB-encapsulating liposomes to streptavidin using EDC. Liposome, EDC, streptavidin concentrations, and reaction times were varied. The optimal coupling conditions were found to be an EDC:carboxylated lipid:streptavidin molar ratio of 600:120:1 and a reaction time of 15 min. The second goal was to utilize these liposomes in sandwich hybridization microtiter plate-based assays using biotinylated reported probes as biorecognition elements. The assay was optimized in terms of probe spacer length, probe concentration, liposome concentration, and streptavidin coverage. Subsequently, the optimized protocol was applied to the detection of DNA and RNA sequences. A detection limit of 1.7 pmol L⁻¹ and an assay range spanning four orders of magnitude (5 pmol L⁻¹−50 nmol L⁻¹) with a coefficient of variation ≤5.8% was found for synthetic DNA. For synthetic RNA the LOQ was half that of synthetic DNA. A comparison was made to alkaline phosphatase-conjugated streptavidin for detection which yielded a limit of quantitation approximately 80 times higher than that for liposomes in the same system. Thus, liposomes and the optimized sandwich hybridization method are well suited for detecting single-stranded nucleic acid sequences and compares favorably to other sandwich hybridization schemes recently described in the literature. The assay was then used successfully for the clear detection of mRNA amplified by nucleic acid sequence-based amplification (NASBA) isolated from as little as one Cryptosporidium parvum oocyst. The detection of mRNA from oocysts isolated from various water sample types using immunomagnetic separation was also assessed. Finally, to prove the wider applicability and sensitivity of this universal method, RNA amplified from the atxA gene of Bacillus anthracis was detected when the input to the preceding NASBA reaction was as low as 1.2 pg. This highly sensitive liposome-based microtiter plate assay is therefore a platform technology allowing for high throughput and wide availability for routine clinical and environmental laboratory applications.     

Increased efficacy of in vitro Photofrin photosensitization of human oral squamous cell carcinoma by iron and ascorbate

Photofrin^®, a photosensitizer used in the photodynamic therapy of cancer, selectively localizes in cellular membranes. Upon exposure to visible light, Photofrin^® produces singlet oxygen (¹O₂), which reacts with membrane polyunsaturated fatty acids forming lipid hydroperoxides. Transition metals, such as Fe²⁺, catalyze the production of cytotoxic free radicals from lipid hydroperoxides. Ascorbate reduces ferric to ferrous iron, further augmenting lipid peroxidation. Therefore, to increase the efficacy of Photofrin^® photosensitization, we added 20 μM ferrous sulfate and 100 μM ascorbic acid, in an aqueous layer over SCC-25 oral squamous cell carcinoma cells during in vitro illumination. In electron paramagnetic resonance spin trapping experiments, using POBN (-(4-pyridyl-1-oxide)-N-tert-butylnitrone), we observed that the presence of this pro-oxidant combination greatly increases the production of membrane-derived lipid free radicals. The effect was time dependent but only partially concentration dependent. Trypan blue dye exclusion demonstrated that this increase in lipid radical formation correlated with cytotoxicity. These observations support the hypothesis that Photofrin^® photosensitization leads to lipid hydroperoxide formation, which increases the cell's susceptibility to iron-induced Fenton chemistry. The resulting free radical-mediated lipid peroxidation results in cell death. From these data we hypothesize that the efficacy of photodynamic therapy of superficial cancer might be increased by the topical application of the pro-oxidant combination of iron and ascorbate. Furthermore, their use will probably allow lower doses of Photofrin^® without compromising antitumor effect.