Apatite-forming ability of titanium compound nanotube thin films formed on a titanium metal plate in a simulated body fluid

We compared the apatite-forming ability of a sodium titanate nanotube thin film, an anatase-type titanium dioxide nanotube thin film, and a silver nanoparticle/silver titanate nanotube nanocomposite thin film, in simulated body fluid. The ability of the silver nanoparticle/silver titanate nanotube nanocomposite thin film is slightly higher than that of the anatase-type titanium dioxide nanotube thin film and significantly higher than that of the sodium titanate nanotube thin film. The high ability of the silver nanoparticle/silver titanate nanotube nanocomposite thin film is a newly observed phenomenon, which is probably due to the crystal structure of silver titanate – specifically, to the surface atomic arrangement, the large amount of Ti–OH formed on the nanotube surface, or both. The anatase-type titanium dioxide nanotube thin film and the silver nanoparticle/silver titanate nanotube nanocomposite thin film may have bright prospects for future use in implant materials such as artificial joints. The silver nanoparticle/silver titanate nanotube nanocomposite thin film is particularly promising for its antibacterial properties.     

RGO-TiO2纳米管阵列的制备及其光电性能

采用阳极氧化的方法,通过调节阴、阳两电极间距制备不同壁厚的TiO₂纳米管阵列. 采用脉冲电还原沉积的方法将RGO负载于TiO₂纳米管阵列表面合成了RGO-TiO₂纳米管阵列. 相较于负载在薄壁TiO₂纳米管阵列上的RGO,负载于厚壁TiO₂纳米管阵列上的RGO得以充分还原,覆盖率大幅度提高,并显示出良好的光吸收性质和较低的电荷传输电阻,光电流大幅度增加.     

Design of highly ordered Ag-SrTiO3 nanotube arrays for photocatalytic degradation of methyl orange

Ag-SrTiO₃ nanotube arrays were successfully prepared for the degradation of methyl orange (MO) under ultraviolet irradiation. In order to form highly ordered SrTiO₃ nanotube arrays, the preparation of TiO₂ nanotube arrays by anodic oxidation of titanium foil in different electrolytes was investigated. The selected organic solvents in electrolytes include glycerol, dimethyl sulfoxide and glycol. The results indicate that the morphology of TiO₂ nanotube arrays prepared in glycol containing ammonium fluoride electrolyte is more regular. Then SrTiO₃ nanotube arrays were synthesized by a hydrothermal method using TiO₂ nanotube arrays as the precursor. In order to further improve the photocatalytic activity of SrTiO₃ nanotube arrays, Ag nanoparticles were loaded on SrTiO₃ nanotube arrays by two sets of experiments. The loaded Ag results in an enhancement of photocatalytic activity of SrTiO₃ nanotube arrays. Moreover, the effect of pH on the photocatalytic degradation of MO was also studied.     

负载金的纳米管钛酸光催化氧化一氧化碳

 用化学方法制备了负载金的纳米管钛酸(Au/H2Ti2O4(OH)2)光催化剂,并用TEM,XPS,XRD和DRS等技术对催化剂进行了表征. 结果表明,经573 K处理后,纳米管钛酸表面及管内均有零价的金颗粒存在. 与纳米管钛酸(H2Ti2O4(OH)2)相比,Au/H2Ti2O4(OH)2具有明显的CO光催化氧化活性,但在暗态时无活性. 经分析认为,暗态时Au与纳米管相互接触的周界处不活泼,故催化剂无CO催化氧化活性; 紫外光照射下,纳米管激发产生e--h+对,e-从纳米管转移到Au0上, 使纳米管和Au-在接触周界处产生相互作用,形成活性位,导致CO催化氧化反应发生.     

Single-walled carbon nanotubes of controlled diameter and bundle size and their field emission properties

Field emission studies were conducted on as-produced CoMoCAT single-walled carbon nanotube/silica composites with controlled nanotube diameter and bundle size. It has been observed that the as-produced nanotube material does not need to be separated from the high-surface area catalyst to be an effective electron emitter. By adjusting the catalytic synthesis conditions, single-walled carbon nanotubes (SWNT) of different diameters and bundle sizes were synthesized. A detailed characterization involving Raman spectroscopy, optical absorption (vis-NIR), SEM, and TEM was conducted to identify the nanotube species present in the different samples. The synthesis reaction temperature was found to affect the nanotube diameter and bundle size in opposite ways; that is, as the synthesis temperature increased the nanotube average diameter became larger, but the bundle size became smaller. A gradual and consistent reduction in the emission onset field was observed as the synthesis temperature increased. It is suggested that the bundle size, more than the nanotube diameter or chirality, determines the field emission characteristics of these composites. This is a clear demonstration that field emission characteristics of SWNT can be controlled by the nanotube synthesis conditions.     

Fe、N共掺杂TiO2纳米管阵列的制备及可见光光催化活性

应用电化学阳极氧化法结合浸渍和退火后处理制备了Fe和N共掺杂的TiO2纳米管阵列光催化剂,并用场发射扫描电镜(FESEM)、X射线衍射(XRD)、X射线光电子能谱(XPS)和俄歇电子能谱(AES)仪对其进行了表征.结果表明,Fe、N共掺杂对TiO2纳米管阵列的形貌和结构没有明显影响,Fe和N均掺入了TiO2晶格.紫外-可见(UV-Vis)漫反射光谱显示Fe和N共掺杂TiO2纳米管阵列的吸收带边较纯TiO2纳米管阵列和单一掺杂TiO2纳米管阵列红移,可见光吸收增强.以可见光催化降解罗丹明B(RhB)考察了材料的光催化活性,Fe和N共掺杂TiO2纳米管阵列对RhB的降解速率较纯TiO2纳米管阵列和单一掺杂TiO2纳米管阵列明显提高,证明了Fe、N共掺杂产生的协同效应提高了TiO2纳米管阵列在可见光照射下的光催化活性.     

An investigation on the structural characteristics and reinforcement of melt processed polyamide 66/multiwalled carbon nanotube composites

Properties of melt processed polyamide 66 (PA66)/multiwalled carbon nanotube composite were first characterized experimentally. The experimental results exhibited the formation of crystalline layer around the nanotubes and a considerable enhancement in mechanical properties by incorporation of multiwalled carbon nanotube up to 1 wt%. Mechanical properties were analyzed in terms of structural parameters using micromechanical models proposed in this study. It was suggested that the mechanical properties were greatly dominated by crystalline layer and nanotube length. It was also deduced that the melt mixing process caused a significant nanotube breakage restricting further enhancement of nanocomposite properties at higher nanotube contents. Surface modification of nanotube provided better polymer‐nanotube interaction; however, it increased the mechanical properties marginally. Copyright © 2014 John Wiley & Sons, Ltd.     

Fabrication of titania nanotube arrays on curved surface

In this paper, well-ordered titania nanotube arrays were formed on curved surface provided by titanium wire via anodic oxidation. The morphology of the nanotube arrays was observed by scanning electron microscopy (SEM). It was found that within the range of 360°, all the growing orientations of each nanotube keep correspondence with their outer electric fields. That is to say the surface shapes of anode play an important role on morphology of nanotube arrays. Compared with foils, by changing the anode shape, higher aspect ratio can be obtained. The nanotube arrays formed on wires can provide good understanding for the formation mechanism of the nanotube arrays. Furthermore, it can stimulate new thoughts in practical applications due to its ringed shaper.     

湿法纯化碳纳米管阵列及其对碳纳米管阵列形貌的影响

采用酸溶液处理方法对垂直于衬底生长的碳纳米管阵列的纯化进行了研究. 利用扫描电子显微镜、X射线光电子能谱等手段对纯化前后的碳纳米管阵列的结构、形貌及化学组成进行表征. 实验结果表明, 通过控制条件, 酸溶液处理方法能够在有效地去除催化剂粒子等杂质的同时又保持阵列的相对完整性. 纯化后的碳纳米管阵列会促进其在电子学领域的进一步应用.     

Wet Purification of Aligned Carbon Nanotube Arrays and Its Impact on the Morphology of the Carbon Nanotube Arrays

A simple acid treatment method was applied to remove the catalyst impurities and other residues contaminated in the vertically aligned carbon nanotube arrays. We demonstrated that acid treatment was an efficient approach for aligned carbon nanotube purification. Scanning electron microscopy and X-ray photoelectron spectroscopy were used to characterize the morphology of the aligned carbon nanotube arrays and to determine the efficiency of the purification. Using hydrochloric acid could efficiently eliminate catalyst impurities and retain the original structures of the aligned carbon nanotube arrays. The method provided a simple, economical, and effective way to purify the aligned carbon nanotubes, and it would promote the applications of vertically aligned carbon nanotube arrays in electronic field.     

Fabrication of multi-sectional TiO_2 nanotube arrays by anodization

We report a facile method to grow multi-sectional TiO2 nanotube arrays consisting of alternating bamboo-shaped and smooth-walled nanotube sections by anodization.Two key factors are necessary for obtaining these morphologies.First,in order to avoid possible disruptions between the conjoint sections of the nanotube,the distribution of hydrogen ions is suggested not to be fiercely disturbed when switching from the first to the second stage.Second,to avoid the disruption of the nanotube at the joint which resu...     

多孔模板法制备聚乙撑二氧噻吩纳米管光电性能的研究

采用单体聚合-溶液浸润-聚合物成管同时进行的方法,在氧化铝多孔模板(AAO)中制备了聚乙撑二氧噻吩(PEDOT)纳米管.通过形貌分析推断PEDOT纳米管在孔道中的生长包括两个过程:首先是聚合物溶液浸润整个孔道;然后是聚合过程中生成的阳离子自由基和掺杂态的PEDOT由于带正电荷而在孔道壁产生"钉扎"效应.XRD分析显示,在孔道内生成的PEDOT分子链具有一定的取向性.进一步研究表明,聚合物的吸附及单体聚合后的吸附,在模板壁导致不同的分子链排列,使PEDOT纳米管分子排列有序性受到影响.采用四探针和扫描隧道显微镜(STM)方法研究了纳米管光电性能.     

Preparation of stimulus-responsive,polyfluorene-wrapped carbon nanotubes via palladium cross coupling

Decoration of carbon nanotube surfaces without damaging nanotube optoelectronic properties is an ongoing challenge. Here, we utilize Sonogashira coupling chemistry to decorate the nanotube surface without perturbing optoelectronic properties. Reactive, noncovalently functionalized polymer–nanotube complexes were prepared using a polyfluorene with aryl iodide groups in its side chains. The aryl iodides enable Pd cross coupling between polymer–nanotube complexes and small molecules or polymers derivatized with an alkyne. Modestly efficient coupling was found to occur under dilute conditions at elevated temperatures. Successful coupling between aryl iodide and alkyne partners was observed using infrared spectroscopy via the appearance of carbonyl stretches that originate from covalently linked, carbonyl-containing alkynes, and thermogravimetric analysis was used to measure reaction conversion under various conditions. Grafting of the hydrophobic polymer–nanotube complex with poly(ethylene glycol) enabled the dispersion to be transferred from organic to aqueous solution. This chemistry resulted in no damage to the nanotube sidewall, as evidenced by Raman spectroscopy. The aryl iodide-containing polyfluorene–nanotube complex was also coupled to a photoswitchable alkyne-containing spiropyran moiety and it was found that the photoswitch retained its functionality after coupling to the polymer–nanotube complex. © 2018 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2018 , 56, 2723–2729     

Light‐driven atom transfer radical polymerization on supramolecular complexes of conjugated polymers and single‐walled carbon nanotubes

Previous approaches used to decorate latently reactive conjugated polymer‐coated carbon nanotube complexes have utilized “grafting‐to” strategies. Here, we coat the carbon nanotube surface with a conjugated polymer whose side chains contain the radical initiator, α‐bromoisobutyrate, which enables atom transfer radical polymerization (ATRP) from the polymer–nanotube surface. Using light to generate Cu(I) in situ, ATRP is used to grow narrow dispersity polymer chains from the polymer–nanotube surface. We confirm the successful polymerization of (meth)acrylates from the polymer–nanotube surface using a combination of gel permeation chromatography and infrared spectroscopy. Strikingly, we demonstrate that nanotube optoelectronic properties are preserved after radical‐mediated polymer grafting using Raman spectroscopy and photoluminescence mapping. Overall, this work elucidates a method to grow narrow dispersity polymer chains from the polymer–nanotube surface using light‐driven radical chemistry, with concurrent preservation of nanotube optoelectronic properties. © 2019 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2019, 57, 2015–2020     

阳极氧化TiO2纳米管阵列的制备与掺杂

近年来,TiO₂纳米管阵列的制备与应用得到了广泛的研究。阳极氧化法制备TiO₂纳米管阵列具有工艺简单、成本低廉、易于放大等优点,引起了极大关注。本文综述了阳极氧化法制备TiO₂纳米管阵列的研究现状,基于TiO₂纳米管阵列在阳极氧化过程中的生长机理,讨论了决定阳极氧化TiO₂纳米管阵列形成的主要因素。结合本组的研究工作,总结了如何通过改变电压、升压速率、电解液、温度和氧化时间,实现纳米管管径、管壁厚度、管长的有效控制,提高TiO₂纳米管阵列的表面形貌质量。最后介绍了TiO₂纳米管阵列掺杂改性方面的研究进展。     

Strong correlations and Fickian water diffusion in narrow carbon nanotubes

The authors have used atomistic molecular dynamics (MD) simulations to study the structure and dynamics of water molecules inside an open ended carbon nanotube placed in a bath of water molecules. The size of the nanotube allows only a single file of water molecules inside the nanotube. The water molecules inside the nanotube show solidlike ordering at room temperature, which they quantify by calculating the pair correlation function. It is shown that even for the longest observation times, the mode of diffusion of the water molecules inside the nanotube is Fickian and not subdiffusive. They also propose a one-dimensional random walk model for the diffusion of the water molecules inside the nanotube. They find good agreement between the mean-square displacements calculated from the random walk model and from MD simulations, thereby confirming that the water molecules undergo normal mode diffusion inside the nanotube. They attribute this behavior to strong positional correlations that cause all the water molecules inside the nanotube to move collectively as a single object. The average residence time of the water molecules inside the nanotube is shown to scale quadratically with the nanotube length.     

Bottom-up Synthesis and Thread-in-Bead Structures of Finite (n,0)-Zigzag Single-Wall Carbon Nanotubes

The last remaining synthetic target of finite single-wall carbon nanotube models, the zigzag nanotube, has been accomplished through bottom-up chemical synthesis. The zigzag nanotube was synthetically accessible without constructing long-sought yet elusive cyclacene structures but with a cycloarylene structure by devising its cutout positions. The persistent tubular shape was also perfected in this last model by cyclization of zigzag-shaped aromatic molecules with a synchronous topological arrangement. The crystal structure of this nanotube further revealed an entangled supramolecular assembly, which showed a novel way to align nanotube molecules by utilizing their open-end functional groups in a thread-in-bead molecular assembly.     

Size dependent structural and electronic properties of MgO nanotube clusters

MgO nanotube clusters which cross sections are composed of two‐, three‐, four‐, and five‐membered rings are constructed and studied by the density functional theory at B3LYP/6‐31G(d) level. The variations of bond length present anisotropic effect. Three‐membered ring nanotube cluster is the most stable tube among these MgO isomers. Mixed covalent and ionic bonding always exists in MgO nanotube clusters. With increasing length of MgO nanotube clusters, the averaged atomic charge increases, and converge to 1.227; the s‐p separation of O bands decreases; whereas energy gap nearby frontier orbitals present dramatic difference corresponding to various structure family. It is possible that MgO nanotube clusters show electronic properties of semiconductor. An interpretation for MgO nanotube clusters fabricated by simply thermal methods is proposed. The structural and electronic properties of MgO nanotube clusters are discussed systematically in details. © 2008 Wiley Periodicals, Inc. Int J Quantum Chem, 2009     

Theoretical study on interaction of hydrogen with single-walled boron nitride nanotubes. II. Collision, storage, and adsorption

Collision and adsorption of hydrogen with high incident kinetic energies on a single-walled boron nitride (BN) nanotube have been investigated. Molecular-dynamics (MD) simulations indicate that at incident energies below 14 eV hydrogen bounces off the BN nanotube wall. On the other hand, at incident energies between 14 and 22 eV each hydrogen molecule is dissociated at the exterior wall to form two hydrogen atoms, but only one of them goes through the wall. However, at the incident energies between 23 and 26 eV all of the hydrogen atoms dissociated at the exterior wall are found to be capable of going inside the nanotube and then to recombine to form hydrogen molecules inside the nanotube. Consequently, it is determined that hydrogen should have the incident energy >22 eV to go inside the nanotube. On the other hand, we find that the collisions using the incident energies >26 eV could result in damaging the nanotube structures. In addition our MD simulations find that hydrogen atoms dissociated at the wall cannot bind to either boron or nitrogen atoms in the interior wall of the nanotube.     

Modulation of the electronic structure of semiconducting nanotubes resulting from different metal contacts

Examined in this paper is the role of the metal electrode influencing the structure and electronic properties of semiconducting carbon nanotubes near the interface at low bias. Specifically, we present quantum-chemical calculations of finite sections of a (8,0) semiconducting single wall nanotube contacted with gold and palladium clusters. The calculations at the density functional level of theory, which included full geometry optimizations, indicate the formation of bonds between the metal atoms of the electrode and the carbon atoms of the nanotube. The local work function of the metal electrode can be expected to exhibit significant variations as a result of this bond formation. Compared to the gold-contacted nanotubes, the palladium-contacted nanotubes have a small but interesting increase in both length and diameter. The highest occupied molecular orbital (HOMO) and lowest unoccupied molecular orbital (LUMO) of the gold-contacted nanotube are shown localized at the edges. In contrast, the HOMO and LUMO of the palladium-contacted nanotube are extended over the entire nanotube and the metal cluster contacted to it, providing thereby a better conduction path in the contact region of the electrode and the nanotube. The involvement of the highly directional d orbitals in the interactions involving the palladium cluster leads to an enhanced pi electron density in the nanotube. This enhanced pi electron density is synonymous with an improved electron transmission.