Proton diffusion across membranes of vesicles of poly(styrene-b-acrylic acid) diblock copolymers

A study of proton diffusion across membranes of block copolymer vesicles in dilute solution is described. The vesicles were formed by the self-assembly of a diblock copolymer of poly(styrene-b-acrylic acid) (PS(310)-b-PAA(36), where the numbers represent the degree of polymerization for individual blocks). A pH gradient was created across the vesicle membrane with the interior pH (pH(in)) of ca. 2.9 and the exterior pH (pH(out)) of ca. 8.5. The permeability of the polystyrene (PS) membrane was tuned by the addition of different amounts of dioxane (0-40 wt %) to the external aqueous solution. Proton concentrations in the solution outside of the vesicles were followed by monitoring the spectrum of a pH-sensitive fluorescent dye, namely 8-hydroxypyrene-1,3,6-trisulfonate. After the start of the experiment, the proton concentrations increase linearly with the square root of time, while the slopes of the lines increase with dioxane content. To calculate the diffusion coefficients of the protons across the vesicular membrane, the concentration data were fitted using a model, which describes the diffusion of species across the membrane of a reservoir. The apparent diffusion coefficient (D*, which equals the true diffusion coefficient multiplied by the partition coefficient of protons between PS and water) increases from 1.1 x 10(-18) cm(2)/s at 7 wt % dioxane in the external solution to 1.2 x 10(-14) cm(2)/s at 40 wt %. The increase of D* with dioxane content is related to its plasticization of the PS membrane, which can be used as a gating mechanism.     

α‐Chymotrypsin‐Catalyzed Reaction Confined in Block‐Copolymer Vesicles

Herein the reactivity of the enzyme α‐chymotrypsin in the confinement of polystyrene‐block‐poly(acrylic acid) (PS‐b‐PAA) vesicles was investigated. Enzyme and substrate molecules were encapsulated in PS‐b‐PAA vesicles with internal diameters ranging from 26 nm to 165 nm during the formation of the vesicles. While the loading efficiencies of enzyme and substrate molecules were practically identical for vesicles of identical size, they were found to increase with decreasing vesicle size. The kinetics of the α‐chymotrypsin catalyzed hydrolysis of N‐succinyl‐Ala‐Ala‐Phe‐7‐amido‐4‐methylcoumarin (AMC) was evaluated following the increase of the absorption of the product 7‐amino‐4‐methylcoumarin by UV/Vis spectroscopy. The values of the catalytic turnover number obtained for reactions inside vesicles with different sizes showed an increase of up to fourteen times compared to the bulk value with decreasing vesicle volume, while the values of the Michaelis–Menten constant decreased, respectively. This increase in reactivity of α‐chymotrypsin is attributed to the effect of vesicle–wall interactions in the finite encapsulated space, where the reagents could diffuse, leading to enhanced collision frequencies.     

Controlled and Tunable Loading and Release of Vesicles by Using Gigahertz Acoustics

Controllable exchange of molecules between the interior and the external environment of vesicles is critical in drug delivery and micro/nano‐reactors. While many approaches exist to trigger release from vesicles, controlled loading remains a challenge. Herein, we show that gigahertz acoustic streaming generated by a nanoelectromechanical resonator can control the loading and release of cargo into and from vesicles. Polymer‐shelled vesicles showed loading and release of molecules both in solution and on a solid substrate. We observed deformation of individual giant unilamellar vesicles and propose that the shear stress generated by gigahertz acoustic streaming induces the formation of transient nanopores, with diameters on the order of 100 nm, in the vesicle membranes. This provides a non‐invasive method to control material exchange across membranes of different types of vesicles, which could allow site‐specific release of therapeutics and controlled loading into cells, as well as tunable microreactors.     

Polystyrene-b-poly(acrylic acid) vesicle size control using solution properties and hydrophilic block length

Polymeric vesicles have attracted considerable attention in recent years, since they are a model for biological membranes and have versatile structures with several practical applications. In this study, we prepare vesicles from polystyrene-b-poly(acrylic acid) block copolymer in dioxane/water and dioxane/THF/water mixtures. We then examine the ability of additives (such as NaCl, HCl, or NaOH), solvent composition, and hydrophilic block length to control vesicle size. Using turbidity measurements and transmission electron microscopy (TEM) we show that larger vesicles can be prepared from a given copolymer by adding NaCl or HCl, while adding NaOH yields smaller vesicles. The solvent composition (ratio of dioxane to THF, as well as the water content) can also determine the vesicle size. From a given copolymer, smaller vesicles can be prepared by increasing the THF content in the THF/dioxane solvent mixture. In a given solvent mixture, vesicle size increases with water content, but such an increase is most pronounced when dioxane is used as the solvent. In THF-rich solutions, on the other hand, vesicle size changes only slightly with the water concentration. As to the effect of the acrylic acid block length, the results show that block copolymers with shorter hydrophilic blocks assemble into larger vesicles. The effect of additives and solvent composition on vesicle size is related to their influence on chain repulsion and aggregation number, whereas the effect of acrylic acid block length occurs because of the relationship among the block length, the width of the molecular weight distribution, and the stabilization of the vesicle curvature.     

Molecular exchange through the vesicle membrane of siloxane surfactant in water/glycerol mixed solvents

The effect of glycerol on the permeability of vesicle membranes of a siloxane surfactant, the block copolymer polyethyleneoxide-b-polydimethylsiloxane-polyethyleneoxide, (EO)15-(DMS)15-(EO)15, was studied with freeze-fracture transmission electron microscopy (FF-TEM) and pulsed-field gradient nuclear magnetic resonance (PFG-NMR) spectroscopy. The FF-TEM results show that, in pure water, the surfactant can form small vesicles with diameters of less than 25 nm, as well as a few multilamellar vesicles with diameters larger than 250 nm. Gradual substitution of water with glycerol to a glycerol content of 40% leads to significant structural transformations: small vesicles are gradually swollen, and large multilamellar vesicles disappear. A glycerol content of 60% results in the complete disintegration of the vesicles into membrane fragments. PFG-NMR measurements indicate that the vesicle membrane does not represent an effective barrier for water molecules on the NMR time scale; hence, the average residence time of water in the encapsulated state is below tau b = 2 ms. In contrast, the average residence time of glycerol molecules in the encapsulated state can be as large as tau b = 910 ms. The permeability of the vesicle membrane increases with increasing glycerol concentration in the solvent: At a concentration of 40%, the residence time tau b is lowered to approximately 290 ms. After vesicle destruction at higher glycerol concentrations, a small glycerol fraction is still bound by membrane fragments that are formed after the disintegration of the vesicles.     

Loading of Vesicles into Soft Amphiphilic Nanotubes using Osmosis

The facile assembly of higher‐order nanoarchitectures from simple building blocks is demonstrated by the loading of vesicles into soft amphiphilic nanotubes using osmosis. The nanotubes are constructed from rigid interdigitated bilayers which are capped with vesicles comprising phospholipid‐based flexible bilayers. When a hyperosmotic gradient is applied to these vesicle‐capped nanotubes, the closed system loses water and the more flexible vesicle bilayer is pulled inwards. This leads to inclusion of vesicles inside the nanotubes without affecting the tube structure, showing controlled reorganization of the self‐assembled multicomponent system upon a simple osmotic stimulus.     

Active uptake of drugs into photosensitive liposomes and rapid release on UV photolysis

Liposomes containing high concentrations of the anticancer drug doxorubicin, prepared by active-loading techniques, have been intensively investigated as potential agents for chemotherapy. The present study investigates the possibility of active uptake and photoinduced release of such solutes from liposomes incorporating a photoisomerizable lipid. The active loading of acridine orange and doxorubicin was investigated using liposomes containing entrapped ammonium sulfate. The liposomes were prepared with dipalmitoyl-L-alpha-phosphatidyl choline (DPPC) and a photochromic lipid, (1,2-(4'-n-butylphenyl)azo-4'-(gamma-phenylbutyroyl))-glycero-3- phosphocholine (Bis-Azo PC), which isomerizes on exposure to near-UV light with resulting changes in membrane permeability to solutes. The rate of loading of the vesicles below the phase transition temperature of DPPC was investigated as a function of Bis-Azo PC and cholesterol concentrations in the liposome. The rate of doxorubicin uptake was found to be greatly decreased in the presence of cholesterol, while below 30 degrees C the rate of acridine orange uptake was increased in the presence of cholesterol. On exposure to a single UV laser pulse, actively loaded acridine orange was rapidly released from liposomes containing Bis-Azo PC at a rate similar to that found for the indicator dye calcein. However while cholesterol had previously been shown to greatly enhance the rate of photo-induced calcein leakage, it had no significant effect on the rate of acridine orange release. After active loading into DPPC vesicles containing Bis-Azo PC, doxorubicin was also released after exposure to a single laser pulse, but at a rate slower than for acridine orange and calcein. The difference in behavior between these systems is ascribed to the interactions of acridine orange and doxorubicin with the liposome bilayer. Photoinduced release of pharmacologically active materials from sensitized liposomes might provide a useful adjunct or alternative to conventional photodynamic therapy.     

Inclusion and fractionated release of nucleic acids using microcapsules made from plant cells.

The encapsulation and fractionated release of nucleic acids on vesicular packing (VP) materials have been investigated. The earlier described dependence of the permeation of nucleic acid molecules through the vesicle membranes on the salt concentration is a necessary precondition for both encapsulation and fractionation. Encapsulation is achieved by applying a suitable sample onto a VP column that has been equilibrated with a high-salt buffer. In that buffer the sample molecules are permeable. Immediately after sample application, elution is started with a low-salt buffer, from which the sample molecules are excluded. At the front between the two buffers the permeability changes, and some of the sample molecules distributed inside the vesicles cannot pass through the membranes. These encapsulated molecules can be released by increasing the salt concentration in the eluent. If the encapsulated nucleic acid sample is polydisperse, a stepwise or linear increase in the salt concentration leads to a fractionated release. The fractions obtained differ in their molecular size composition.     

Poly(lactide-co-glycolide)-laponite-F68 nanocomposite vesicles through a single-step double-emulsion method for the controlled release of doxorubicin

Poly(lactide-co-glycolide) (PLGA)-laponite-F68 nanocomposite (PNC) vesicles were prepared through a technically facile, single-step water/oil/water double-emulsion method using ethyl acetate/water mixture. Vesicles of diameter 100 nm to 1.2 μm and average membrane thickness 30 nm were produced. Encapsulation with chemotherapeutic drug doxorubicin revealed unilamellar nature of the vesicle wall. PNC exhibited exfoliated morphology, enhanced thermal stability over neat PLGA, and a glass transition temperature of 54.29 °C. The zeta potential of -14.1 ± 0.231 for the vesicles revealed that the negatively charged PLGA surface is covered with neutral F68 in the vesicle wall. F68-Assisted formation of water/oil/water double emulsion of PNC in ethyl acetate/water mixture is proposed for the formation of the vesicles. Release characteristics of doxorubicin in phosphate-buffered saline (pH 7.4), cytotoxicity of bare and drug-loaded PNC vesicles with L929 cells, and uptake of doxorubicin with C6 fibroblast glioma cell line were also investigated.     

Molecular exchange through vesicle membranes: a pulsed field gradient nuclear magnetic resonance study

The permeability of block copolymer vesicles is studied using pulsed field gradient nuclear magnetic resonance spectroscopy together with a numerical data analysis procedure. Polyethylene oxide molecules of various molecular masses are used to sample the permeability of the vesicle membrane by observing the trans-membrane exchange process under equilibrium conditions. For shorter polyethylene oxide chains, the analysis yields a nearly linear dependence of the logarithmic trans-membrane exchange rate on the hydrodynamic radius of the sample molecules.     

Self-Assembled Plasmonic Vesicles of SERS-Encoded Amphiphilic Gold Nanoparticles for Cancer Cell Targeting and Traceable Intracellular Drug Delivery

We report the development of bioconjugated plasmonic vesicles assembled from SERS-encoded amphiphilic gold nanoparticles for cancer-targeted drug delivery. This new type of plasmonic assemblies with a hollow cavity can play multifunctional roles as delivery carriers for anticancer drugs and SERS-active plasmonic imaging probes to specifically label targeted cancer cells and monitor intracellular drug delivery. We have shown that the pH-responsive disassembly of the plasmonic vesicle, stimulated by the hydrophobic-to-hydrophilic transition of the hydrophobic brushes in acidic intracellular compartments, allows for triggered intracellular drug release. Because self-assembled plasmonic vesicles exhibit significantly different plasmonic properties and greatly enhanced SERS intensity in comparison with single gold nanoparticles due to strong interparticle plasmonic coupling, disassembly of the vesicles in endocytic compartments leads to dramatic changes in scattering properties and SERS signals, which can serve as independent feedback mechanisms to signal cargo release from the vesicles. The unique structural and optical properties of the plasmonic vesicle have made it a promising platform for targeted combination therapy and theranostic applications by taking advantage of recent advances in gold nanostructure based in vivo bioimaging and photothermal therapy and their loading capacity for both hydrophilic (nucleic acids and proteins) and hydrophobic (small molecules) therapeutic agents.     

Polymeric vesicle permeability: a facile chemical assay

We present a simple method to characterize vesicles and determine, at the same time, the membrane permeability to specific molecules. The method is based on encapsulating highly hydrophilic 3,3',3' '-phosphinidynetris-benzenesulfonic acid (PH) into vesicles and subsequently monitoring its reaction with 5,5'-dithiobis-2-nitrobenzoic acid (DTNB). We tested the method by measuring the membrane permeability of vesicles formed from a series of poly(ethylene oxide)-co-polybutylene oxide (EB) copolymers and egg yolk phosphatidylcholine. We found that the experimental data are in good agreement with calculations based on Fick's first law. We therefore quantified the DTNB permeability across vesicle membranes, finding that polymeric EB membranes have a more selective permeability toward polar molecules compared to phospholipids membranes.     

Ordering transitions in nematic liquid crystals induced by vesicles captured through ligand-receptor interactions

We report that phospholipid vesicles incorporating ligands, when captured from solution onto surfaces presenting receptors for these ligands, can trigger surface-induced orientational ordering transitions in nematic phases of 4'-pentyl-4-cyanobiphenyl (5CB). Specifically, whereas avidin-functionalized surfaces incubated against vesicles composed of 1,2-dioleoyl-sn-glycero-3-phosphocholine (DOPC) were observed to cause the liquid crystal (LC) to adopt a parallel orientation at the surface, the same surfaces incubated against biotinylated vesicles (DOPC and 1,2-dioleoyl-sn-glycero-3-phosphoethanolamine-N-(biotinyl) (biotin-DOPE)) caused the homeotropic (perpendicular) ordering of the LC. The use of a combination of atomic force microscopy (AFM), ellipsometry and quantitative fluorimetry, performed as a function of vesicle composition and vesicle concentration in solution, revealed the capture of intact vesicles containing 1% biotin-DOPE from buffer at the avidin-functionalized surfaces. Subsequent exposure to water prior to contact with the LC, however, resulted in the rupture of the majority of vesicles into interfacial multilayer assemblies with a maximum phospholipid loading set by random close packing of the intact vesicles initially captured on the surface (5.1 ± 0.2 phospholipid molecules/nm(2)). At high concentrations of biotinylated lipid (>10% biotin-DOPE) in the vesicles, the limiting lipid loading was measured to be 4.0 ± 0.3 phospholipid molecules/nm(2), consistent with the maximum phospholipid loading set by the spontaneous formation of a bilayer during incubation with the biotinylated vesicles. We measured the homeotropic ordering of the LC on the surfaces independently of the initial morphology of the phospholipid assembly captured on the surface (intact vesicle, planar multilayer). We interpret this result to infer the reorganization of the phospholipid bilayers either prior to or upon contact with the LCs such that interactions of the acyl chains of the phospholipid and the LC dominate the ordering of the LC, a conclusion that is further supported by quantitative measurements of the orientation of the LC as a function of the phospholipid surface density (>1.8 molecules/nm(2) is required to cause the homeotropic ordering of the LC). These results and others presented herein provide fundamental insights into the interactions of phospholipid-decorated interfaces with LCs and thereby provide guidance for the design of surfaces on which phospholipid assemblies captured through ligand-receptor recognition can be reported via ordering transitions in LCs.     

Formation and properties of HCO-10 vesicles

 The characteristics of poly(oxyethylene) hydrogenated caster oil ether (HCO-10) vesicles were studied for the standpoints of encapsulation efficiency, stability, solubilization and permeability or barrier efficiency. The vesicles of 5% HCO-10 had 6.24% of calcein-entrapment efficiency and 240 nm of mean diameter. The stability of HCO-10 vesicle suspensions was dependent on their concentrations. In the vesicle suspensions of 10% HCO-10 or more, both the size of the vesicles and the fluidity of the suspensions obviously varied with incubation time, indicating that a flocculation occurred; whereas, the vesicle suspension of 5% HCO-10 was relatively stable. The solubilization process of HCO-10 vesicles by SDS was similar to that of EggPC liposomes. The rate constants for permeation of Cl ion and calcein were 2.46×10^-3 s^-1 and 5.79×10^-5 s^-1, respectively, suggesting that HCO-10 vesicles possessed some barrier potential for Cl ion and calcein although they were smaller than those of liposomes. Furthermore, the efflux of the solute such as calcein from HCO-10 vesicles was maximum at 37 °C, where the vesicle membrane was presumably destabilized by dehydration of EOs in HCO-10 molecules. Received: 7 May 1996 Accepted: 3 September 1996     

Preparation and properties of vesicles made of nonpolar/polar/nonpolar fullerene amphiphiles

Twenty potassium complexes of penta-[(4-substituted)phenyl][60]fullerene anions were synthesized and examined for their ability to form bilayer vesicles in water. The 4-substituents include alkyl groups ranging from methyl to icosanyl groups and perfluoromethyl, perfluorobutyl, and perfluorooctyl groups. The overall structure of the amphiphiles can be described as a nonpolar/polar/nonpolar (n-p-n') motif as opposed to the usual polar/nonpolar motif of lipid amphiphiles. Despite the hydrophobicity of the fullerene moiety (n-part) and alkyl/perfluoroalkyl chains (n'-part), all compounds except for the one with perfluoromethyl groups were soluble in water because of the centrally located fullerene cyclopentadienide (p-part) and spontaneously formed a vesicle of 25- to 60-nm diameter with a narrow unimodal size distribution. The vesicles are stable upon heating to 90 °C or standing over one year in air, as well as on a solid substrate in air or in vacuum, maintaining their spherical form. The vesicle membrane consists of an interdigitated bilayer of the amphiphile molecules, in which the fullerene n-part is inside and the n'-side is exposed to water. These vesicles, in particular the one bearing icosanyl chains, exhibit the smallest water permeability coefficient ever found for a self-assembled membrane in water.     

Smart Approach for In Situ One‐Step Encapsulation and Controlled Delivery of a Chemotherapeutic Drug using Metal–Organic Framework–Drug Composites in Aqueous Media

Controlled release of an anticancer drug, doxorubicin (dox), from metal–organic framework (MOF)–drug composites is demonstrated under different external stimuli. 1,3,5‐Benzenetricarboxylic acid (H₃BTC) is used as an organic ligand, and iron acetate and zinc nitrate are used as metal sources to synthesize Fe–BTC and Zn–BTC MOFs, which are known to be biocompatible. The in situ formation of MOF–drug composites demonstrates high drug loading capacity compared to conventional methods. The present methodology is devoid of any extra steps for loading the drug after synthesis. Moreover, the drug loading is also independent of pore size of the MOF as the drug molecules are embedded inside the MOF during their in situ formation. The drug release was monitored under external stimuli including change to acidic pH and the presence of biocompatible liposomes for a period of more than 72 h. Steady‐state fluorescence spectroscopy is used to monitor the drug release as a function of time and confocal laser scanning microscopy is used to unravel the post‐release fate of doxorubicin in the presence of liposomes. It is found that drug release rate is higher for the Zn–BTC–dox composite than for the Fe–BTC–dox composite. This is attributed to the stronger binding between dox and Fe‐BTC than that between dox and Zn–BTC. This study highlights a novel approach for the preparation of MOF–drug composites in an aqueous medium for future biomedical applications.     

Controlled initiation of enzymatic reactions in micrometer-sized biomimetic compartments

We present a technique to initiate chemical reactions involving few reactants inside micrometer-scale biomimetic vesicles (10(-12) to 10(-15) L) integral to three-dimensional surfactant networks. The shape of these networks is under dynamic control, allowing for transfer and mixing of two or several reactants at will. Specifically, two nanotube-connected vesicles were filled with reactants (substrate and enzyme, respectively) by microinjection. Initially, the vesicles are far apart and any diffusive mixing (on relevant experimental time scales) between the contents of the separated vesicles is hindered because of the narrow diameter and long axial extension of the nanotube. To initiate a reaction, the vesicles were brought close together, the nanotube was consumed by the vesicles and at a critical distance, the nanotube-vesicle junctions were dilated leading to formation of one spherical reactor, and hence mixing of the contents. We demonstrate the concept using a model enzymatic reaction, which yields a fluorescent product (two-step hydrolysis of fluorescein diphosphate by alkaline phosphatase), where product formation was measured as a function of time using a FRAP fluorescence microscopy protocol. By comparing the enzymatic activity with bulk measurements, the enzyme concentration inside the vesicle could be determined. Reactions could be followed for systems having as few as approximately 15 enzyme molecules confined to a reactor vesicle. To describe the experiments we use a simple diffusion-controlled reaction model and solve it using a survival probability approach. The agreement with experiment is qualitative, but the model describes the trends well. It is shown that the model correctly predicts (i) single-exponential decay after a few seconds, and (ii) that the substrate decay constant depends on the number of enzymes and geometry of reaction container. The numerical correction factor Lambda is introduced in order to ensure semiquantitative agreement between experiment and theory. It was shown that this numerical factor depends weakly on vesicle radius and number of enzymes, thus it is sufficient to determine this factor only once in a single calibration measurement.     

Shear-induced permeation and fusion of lipid vesicles

This paper introduces a novel approach to controlling membrane permeability in free unilamellar vesicles using shearing in the presence of a detergent with a large head-group to tune pore formation. Such shear-induced permeation could offer a simple means of postencapsulating bioactive molecules to prepare vesicle vectors for drug delivery. Using UV absorption, fluorescence emission, dynamic light scattering, and electron microscopy, we investigated the membrane permeability and the morphology of unilamellar lipid vesicles (diameter in the range 50-400 nm) subjected to a shear stress in the presence of a small amount of nonionic surfactant (Brij 76). Shear-induced leakage and fusion events were observed. We analyzed the significance of the vesicle size, the shear rate, and the surfactant-to-lipid ratio for the observed phenomena. The present approach is evaluated for postloading of preformed vesicles.     

Electroformation in a flow chamber with solution exchange as a means of preparation of flaccid giant vesicles

A recently described technique [Estes and Mayer, Biochim. Biophys. Acta 1712 (2005) 152-160] for the preparation of giant unilamellar vesicles (GUVs) in solutions with high ionic strength is examined. By observing a series of osmotic swellings followed by vesicle bursts upon a micropipette transfer of a single POPC GUV from a sucrose solution into an iso-osmolar glycerol solution, a value for the permeability of POPC membrane for glycerol, P=(2.09+/-0.82) x 10(-8)m/s, has been obtained. Based on this result, an alternative mechanism is proposed for the observed exchange of vesicle interior. With modifications, the method of Estes and Mayer is then applied to preparation of flaccid GUVs.     

Vesicles from docosahexaenoic acid

In dilute aqueous solution and at room temperature, cis-4,7,10,13,16,19-docosahexaenoic acid (DHA) self-assembles into vesicles (self-closed bilayers), if the molar ratio of the neutral form of DHA to anionic DHA is kept between 1:1 and 1:3 (corresponding to a bulk pH between 8.5 and 9.2 for a system with 10 mM DHA). By using polycarbonate membrane extrusion, stable unilamellar DHA vesicles with an average diameter of 80 nm can be prepared at pH 8.8. Cryo-transmission electron microscopy indicates that the width of the DHA bilayers in the vesicles is clearly below twice the length of an extended DHA molecule, indicating a high conformational flexibility of DHA within the vesicle bilayer. These DHA bilayers have a similar thickness like bilayers of vesicles prepared at pH 8.5 from oleic acid (cis-9-octadecenoic acid). Using calcein as fluorescent reference compound, it is shown that water-soluble molecules can be encapsulated inside DHA vesicles which may make them interesting for medical or food applications.