Simultaneous Determination of Atrazine and Chlorpyrifos in Pesticide Formulations,in Soils and Waters by Derivative Spectrophotometry and Ratio Spectra Derivative

Abstract

A new method is described to analyse a binary mixture of atrazine and chlorpyrifos, using first-derivative spectrophotometry for atrazine and first derivative of the ratio spectra for chlorpyrifos. The procedure does not require any separation step. Calibration graphs were linear up to 15 μg.mL^?1 of atrazine and to 10 μg.mL^?1 of chlorpyrifos. The method has been applied to determine both compounds in pesticide formulations, in soils and waters.     

Determination of sulfonamide residues in cultured sea cucumber by pre-column derivatization capillary electrophoresis with fluorescence detection

A simple and mild method for the separation of sulfonamide residues based on a condensation reaction with O-phthalaldehyde solution (OPA) as labeling reagent with capillary electrophoresis has been developed. A 58.5 cm × 50 μm i.d. (50 cm effective length) untreated fused-silica capillary was used. To optimize the separation conditions, the background electrolyte concentration, pH, column temperature, voltage and other factors were evaluated. The optimal separation conditions were as follows: 20 mmol L^?1 borate buffer; pH 9.1; column temperature 20 °C; separation voltage 18 kV, pressure 50 mbar and injection time 8 s. Under the optimal conditions, 10 kinds of sulfonamide derivatives could be well-separated within 8 min, and the linear ranges were 0.35–100 μg kg^?1. The detection limit (at a signal-to-noise ratio of 3) was in the range of 0.12–0.25 μg kg^?1, and the quantification limit (at a signal-to-noise ratio of 10) was in the range of 0.35–0.70 μg kg^?1. The sulfonamide residues from cultured sea cucumber samples were determined under the optimal conditions with satisfactory results.     

Simultaneous determination of thiamethoxam and its metabolite clothianidin by LC-MS/MS in goji berry and soil

In this study, an effective analytical method for simultaneous determination of thiamethoxam and its metabolite clothianidin in goji berry and soil was developed by liquid chromatography-tandem mass spectrometry (LC-MS/MS). The recoveries of the compounds in goji berry and soil at the levels of 0.005, 0.02, and 0.1 μg kg^?1 were 84.7–98.9% and the relative standard deviations (RSDs) were 0.9–3.2%. The limits of detection (LOD) for both compounds in goji berry and soil matrices were 0.001 mg kg^?1; the limits of quantification (LOQ) were 0.005 mg kg^?1 for both compounds in two matrices. The dissipation and final residual experiments in 2016 with the commercial formulation of dinotefuran ? thiamethoxam 30% suspension concentrate (SC) was conducted in goji berries in northwest China (Qinghai, Gansu, Inner Mongolia, and Ningxia). Thiamethoxam was dissipated fast in goji plant ecosystem with half-lives were 1.08–1.01 and 2.04–4.25 days in goji berry and soil. The final residues of thiamethoxam were <0.005–0.382 and <0.005–1.120 mg kg^?1 in goji berry and soil, respectively.     

Spectrophotometric and First Derivative Spectrophotometric Determination of Magnesium with 1-Hydroxy-2-Carboxyanthraquinone

Abstract

1-Hydroxy-2-carboxyanthraquinone reacts with magnesium in ethanol-water mixtures to form a red complex having an absorption maximum at 490 nm in alkaline medium. A detailed study of the characteristics of this complex has been carried out and a spectrophotometric method for the determination of magnesium at the 0.4–4.0 μg ml^?1 level is proposed. The method has been sensitized by employing first derivative spectrophotometry. By the use of the derivative approach magnesium can be determined between 0.08–0.40 μg ml^?1. Statistical analysis of the results is also described.     

Simultaneous determination of 32 antibiotics in aquaculture products using LC-MS/MS

An analytical multiclass, multi-residue method for the determination of antibiotics in aquaculture products was developed and validated. A fast, cheap, and straightforward extraction procedure followed by liquid chromatography-tandem mass spectrometry analysis was proposed. This method covers 32 antibiotics of different classes, which are frequently used in aquaculture. Three different extraction procedures were compared, and the extraction with acetonitrile (0.1 vol. % formic acid) showed the best results. The selected extraction procedure was validated at four different fortification levels (10 μg kg^?1, 25 μg kg^?1, 50 μg kg^?1, and 100 μg kg^?1). Recoveries of the tested antibiotics ranged from 70 % to 120 %, with the relative standard deviation (RSD) of triplicates lower than 20 %. The limits of quantification (LOQ) ranged from 0.062 μg kg^?1 to 4.6 μg kg^?1, allowing for the analysis of trace levels of these antibiotics in aquaculture products. The method was applied to the analysis of selected antibiotics in fish and shrimp meat available in the Czech market.     

Spectrophotometric Determination of Manganese with 4(5)-Imidazolealdoxime (Imalox)

Abstract

A method is described for the spectrophotometric determination of manganese by means of its complex with 4(5)-imidazolealdoxime, IMALOX, formed in alkaline medium. The colour system has its absorption maximum at 350 nm and obeys Beer's law over the range 0.8–8.0 μg of Mn per ml. The optimum range is 1–5 μg m^?1. The molar absorptivity is 7850 1 mol^?1 cm^?1. Relatively few ions interfere, and these can be masked with cyanide, tartrate and NTA. The experimental results have been critically analyzed and a comparison with the main spectrophotometric reagents for manganese is presented.     

Selective Kinetic Spectrophotometric Determination of Nitrite in Food and Water

Abstract

A highly selective and sensitive method for the kinetic spectrophothometric determination of sub-microgram amounts of nitrite has been development based on its reaction with Nile blue 2B in acidic medium. The reaction is monitored spectrophotometrically at 595 nm at a fixed time of 4.5 min. The change in absorbance at 595 nm is related to the concentration of nitrite in the range 0.005 - 1.100 μg.ml^?1 The detection limit is 0.001 μg.ml^?1. The relation standard deviation is 1% for 0.020 μg.ml^?1 of nitrite for ten replicate measurements. Most common anions and cations do not interfere. The procedure was applied to the determination of trace amounts of nitrite in sausage and water.     

Dissipation dynamics of fenamidone and propamocarb hydrochloride in pepper,soil and residue analysis in vegetables by ultra-performance liquid chromatography coupled with tandem mass spectrometry

In this study, a rapid and sensitive method was developed for determining fenamidone and propamocarb hydrochloride residues in vegetables and soil by ultra-performance liquid chromatography-tandem mass spectrometry. The dissipation dynamics of fenamidone and propamocarb hydrochloride in pepper and soil was investigated in Beijing, Henan and Shandong provinces. The target compounds were extracted with methanol and cleaned with dispersive solid phase extraction using primary secondary amine. Two pairs of precursor product ion transitions for fenamidone and propamocarb hydrochloride were measured and evaluated. Average recoveries of fenamidone in potato, tomato, cabbage, pepper and soil at three levels (10, 100 and 1000 μg kg^?1) ranged from 76.91% to 107.31% with relative standard deviations (RSDs) from 2.74% to 10.87% (n = 15). The average recoveries of propamocarb hydrochloride ranged from 74.84% to 97.96% with RSDs from 2.43% to 16.16% (n = 15). The limits of detection (LODs) for fenamidone in each matrix were 0.131–0.291 μg kg^?1, and the limits of quantification (LOQs) were 0.436–0.970 μg kg^?1. The LODs for propamocarb hydrochloride were 0.125–0.633 μg kg^?1, and the LOQs were 0.417–2.11 μg kg^?1. The results also showed that the dissipation of fenamidone and propamocarb hydrochloride in pepper and soil followed first-order kinetics model more than that of bi-exponential models. The half-lives of propamocarb hydrochloride were 6.90–15.78 days in pepper and 13.56–23.02 days in soil. The half-lives of fenamidone were 7.48–11.29 days in pepper and 35.18–42.78 days in soil.     

Method for the determination of residues of the herbicide glyphosate and its principal metabolite,aminomethylphosphonic acid,in plant materials by nitrogen-selective gas chromatography

A method has been developed for the determination of residues of glyphosate and its major metabolite, aminomethylphosphonic acid, in stem tissues of blueberries and raspberries. This method involves extraction with water, removal of pigments by charcoal treatment followed by column chromatography using a cation-exchange resin for removal of sugar, a single-step derivatization reaction, and quantification by gas chromatography with a nitrogen-phosphorus detector. Limits of detection for glyphosate and its metabolite were 0.03 and 0.01 mg kg^?1, respectively, for both blueberry and raspberry stems.     

A New Spectrophotometric Method for the Determination of Maneb in Commercial Formulations

Abstract

A new rapid, selective and sensitive method has been developed for the determination of maneb using pyrocatechol-violet(PV) as chelating reagent in the pH range of 7.5–11.0 in the presence of CTAB producing a complex which shows maximum absorption at 640 nm. Working range of the method is 0.2–3.0 μg ml^?1 maneb (manganese ethylenebisdithiocarbamate). The molar absorptivity of the color system is 79600 1 mol^?1 cm^?1 and Sandell's sensitivity is 0.0033 μg cm^?2. The reproducibility of the method has been checked by the 10 replicate analysis of 15 μg of maneb in 10 ml of solution. The method is quite sensitive and has been applied for the determination of maneb in various commercial samples, crops, grains and synthetic samples.     

Persistence and dissipation of fluopicolide and propamocarb on cabbage and soil under semi-arid climatic conditions

Persistence and dissipation of fluopicolide and propamocarb were studied on cabbage and soil as per good agricultural practices over a period of 2 years. A modified QuEChERS analytical method in conjunction with gas chromatography (GC) and GC–mass spectrometry was used for analysis of fluopicolide and its metabolite, 2,6-dichlorobenzamide, and propamocarb in cabbage and soil. The results of the method validation were satisfactory with recoveries within 74.5–100.81% and relative standard deviations 4.8–13.9% (n = 6). The limit of detection (LOD) and limit of quantification (LOQ) of both fluopicolide and 2,6-dichlorobenzamide were 0.003 µg mL^?1 and 0.01 mg kg^?1, respectively. The LOD and LOQ of propamocarb were 0.03 µg mL^?1 and 0.1 mg kg^?1, respectively. During 2013, the initial residue deposits of fluopicolide on cabbage were 0.60 and 1.48 mg kg^?1 from treatments at the standard and double doses of 100 and 200 g a.i. ha^?1 which dissipated with the half-life of 3.4 and 3.7 days. During 2014, the residues were 0.49 and 1.13 mg kg^?1 which dissipated with the half-life of 4.2 and 5.1 days. Propamocarb residues on cabbage were 5.36 and 12.58 mg kg^?1 in the first study (2013) and 4.85 and 10.26 mg kg^?1 in the second study (2014) from treatments at the standard and double doses of 1000 and 2000 g a.i. ha^?1, respectively. The residues dissipated with the half-life of 4–5.5 days. The preharvest interval, the time required for fluopicolide + propamocarb residues to dissipate below the maximum residue limits (notified by EU) at the standard dose, was 11.8 and 14 days during 2013 and 2014. Residue of 2,6-dichlorobenzamide was always <LOQ in cabbage. Residues of fluopicolide, 2,6-dichlorobenzamide and propamocarb were <LOQ in field soil at harvest.     

Simplified liquid chromatographic determination of glyphosate and metabolite residues in environmental water using post-column fluorogenic labelling

Glyphosate and its metabolite aminomethylphosphonic acid in environmental water can be preconcentrated with an anion-exchange column, eluted with potassium citrate solution and determined directly by liquid chromatography with a post-column reactor and a fluorescence detector. The limit of detection and average recovery are 1 μg 1^?1 and 89.3% for glyphosate and 0.4 μg l^?1 and 86.3% for the metabolite.     

Determination of Oxolinic Acid Residues in Gilthead Seabream (Sparus aurata) Muscle Tissue and Plasma by High-Performance Liquid Chromatography

A high-performance liquid chromatographic method for the determination of oxolinic acid (OA) residues in muscle tissue and plasma of the cultured fish gilthead seabream (Sparus aurata L.), is described. OA was extracted with ethyl acetate and after centrifugation the combined extracts were evaporated. To the remaining residue 1 mL of the mobile phase was added and the extract was partitioned with n-pentane which then was rejected by aspiration. OA was chromatographed on a Zorbax^®SB-C₁₈ column at 50^oC and detected by fluorescence detection at λ_ex 327 nm and λ_em 369 nm. The mobile phase was a mixture of 0.1% trifluoroacetic acid (v/v) pH 2.0 and acetonitrile-methanol 3:2 (v/v) in a combination of 50:50 (v/v) and a flow rate of 1.0 mL min^?1, delivered isocratically. Method mean recovery (R%) achieved was 73.7 ± 4.4% (mean ± SD) for blank fortified samples (n=4) range at 50, 100 and 200 μg kg^?1 with a RSD=3.3%. The limit of detection (LOD) was 2.0 μg kg^?1 oxolinic acid in muscle tissue and plasma and the limit of quantification (LOQ) was 5.0 μg kg^?1. The method is fast and suitable to be used with safety and accuracy for the control of OA residues in cultured seabreams and a trained analyst could carry out ready for chromatography more than 50 samples per working day.     

Persistence of trifloxystrobin and tebuconazole in banana tissues and soil under the semi-arid climatic conditions of Karnataka,India

Trifloxystrobin and tebuconazole are used for control of Sigatoka leaf spot disease of banana. This study was conducted to evaluate residue persistence of the fungicides in/on banana fruit, other edible parts and soil after spray application of the combination formulation, Nativo 75 WG, at the standard dose, 87.5 + 175 and double dose, 175 + 350 g a.i. ha^?1. The fungicides were extracted from banana and soil with acetone, partitioned into dichloromethane and cleaned-up using activated charcoal for trifloxystrobin and primary/secondary amine (PSA) for tebuconazole samples. The limit of quantification of the method was 0.05 mg kg^?1 for both fungicides. Initial residues of trifloxystrobin were 0.444 and 0.552 mg kg^?1 in/on banana with peel (whole fruit), which reached <0.05 and 0.065 mg kg^?1 after 30 days from treatment at the standard and double doses, respectively. Tebuconazole residues were 0.636 and 960 mg kg^?1 initially and reduced to 0.066 and 0.101 mg kg^?1 after 30 days. Trifloxystrobin and tebuconazole degraded with the half-life of about 11 days. Trifloxystrobin or its metabolite was not detected in the fruit pulp. Tebuconazole being systemic in nature moved to the fruit pulp which was highest on the 3rd day (0.103 and 0.147 mg kg^?1) and remained for 15 days. Matured banana fruit, flower, pseudostem and field soil were free from fungicide residues. For consumption of raw banana 43 days pre-harvest interval (PHI) is required after treatment of the combination formulation. Therefore application of the fungicides towards maturity stage of the fruits may be avoided.     

Direct determination of bismuth and antimony in sea water by anodic stripping voltammetry

A method based on anodic stripping voltammetry at the mercury-coated graphite electrode has been developed for the direct determination of bismuth and antimony at their natural levels in sea water. Bismuth plated at -0.4 V from sea water made 1 M in hydrochloric acid gives a stripping peak proportional to concentration at -0.2 V without interference from antimony or other metals normally present. Antimony may be plated from sea water made 4 M in hydrochloric acid and gives a stripping peak at -0.2 V proportional to the sum of bismuth and antimony. By use of the standard addition technique, satisfactory results were obtained for sea water samples with concentration ranges of 0.02–0.09 μg kg^?1 for bismuth and 0.2–0.5 μg kg^?1 for antimony.     

The Determination Of Thallium In Human Hair By Graphite Furnace Atomic Absorption Spectrophotometry

Abstract

An atomic absorption spectrophotometric procedure is des-scribed for the rapid determination of thallium in human hair. Samples of 500 μg are dissolved in nitric acid and treated with hydrogen peroxide. Aliquots of 10 μL are then analyzed using electrothermal atomization in a graphite tube furnace. The characteristic concentration for the method is 1 mg Tl kg^?1 which is adequate for forensic investigation. The relative standard deviation for a series of signals from a hair sample spiked to contain 32 mg Tl^?1 kg was 3 per cent.     

Biodegradation of imidacloprid in sandy loam soil by Bacillus aerophilus

A study of the biodegradation of imidacloprid in soil was carried out under laboratory conditions. Sandy soil samples were fortified with imidacloprid at 50, 100 and 150 mg kg^?1 along with 45 x 10⁷ colony forming units (cfus) of Bacillus aerophilus and the samples were compared with unamended soil. The samples were extracted with acetonitrile, cleaned up by treatment with primary secondary amine sorbent and graphitised carbon black. The residues of imidacloprid and its metabolites were analysed by high performance liquid chromatography. The parent compound, imidacloprid, was found to be more persistent in both the treatments. Among metabolites, the highest values were obtained for urea and olefin while 5-hydroxy, 6-chloronicotinic acid (6-CNA), nitrosimine and nitroguanidine (NTG) were also observed in all the treatments in amended soil. In case of unamended (control) soil, 6-CNA was found to be the most persistent metabolite followed by olefin, urea, 5-hydroxy, nitrosimine and NTG metabolites. Total imidacloprid residues for control soil samples followed first-order kinetics at 50 and 150 mg kg^?1 but in case of control imidacloprid fortified at 100 mg kg^?1, the total residues of imidacloprid and its metabolites followed pseudo-first-order kinetics. The respective half-life value for 50 mg kg^?1 was 25.08 days and 30.10 days for both 100 and 150 mg kg^?1. However, total imidacloprid residues followed pseudo-first-order kinetics for its applications at 50, 100 and 150 mg kg^?1 in sandy loam soil amended with B. aerophilus. The half-life values for 50, 100 and 150 mg kg^?1 were worked out to be 14.33, 15.05 and 18.81 days, respectively. With the use of B. aerophilus, the reduction percentage of initial applied dose imidacloprid in sandy loam soil was found to be higher in all the three doses as compared to that of the control samples.     

Simultaneous Determination of Valsartan and Hydrochlorothiazide in Tablets by High-Performance Liquid Chromatography

ABSTRACT

A method for the simultaneous determination of valsartan and hydrochlorothiazide in tablets is described. The procedure, based on the use of reversed-phase high-performance liquid chromatography, is linear in the concentration range 5.0-10.0 μg ml^?1 for valsartan and 0.5-2.0 μg ml^?1 for hydrochlorothiazide, is simple and rapid and allows accurate and precise results. The limit of detection was 1.0 μg ml^?1 for valsartan and 0.05 μg ml^?1 for hydrochlorothiazide.     

Flow-Injection Chemiluminescence Determination of Fluoroquinolones

ABSTRACT

A new flow-injection CL method was developed for the determination of fluoroquinolones including ofloxacin, norfloxacin, ciprofloxacin and lomefloxacin in pharmaceutical preparations, based on the chemiluminescence reaction of sulphite with cerium(IV) sensitized by these compounds. The linear ranges are 0.04 to 4.0 μg ml^?1 for ofloxacin and 0.4 to 40.0 μg ml^?1 for norfloxacin, ciprofloxacin and lomefloxacin, respectively. The detection limits are 0.016 μg ml^?1 for ofloxacin and 0.16 μg ml ^?1 for norfloxacin, ciprofloxacin and lomefloxacin, respectively. The relative standard deviations (RSD) are 2.1 to 2.6% (n=10) for these fluoroquinolones. The analytical procedure has been applied to the determination of the fluoroquinolones in pharmaceutical commercial formulations. The results are in agreement with those obtained by the official methods.     

Determination of Traces of Vanadium with 5-Bomosalicylhydroxamic Acid by Solid-Phase Spectrophotometry

Abstract

A microdetermination method at μg 1^?1 levels for vanadium by solid-phase spectrophotometry has been developed. 5-Bromosalicylhydroxamic acid was used as chromogenic reagent to form a 1:2 violet complex which is easily sorbed and concentrated on a dextran-type anion-exchange resin. The resin-phase absorbances at 560 and 850 nm were measured directly. Vanadium can be determined in the 5 - 60 μg 1^?1 range with a RSD of 4.3%. The method is applied to the determination of vanadium in pet roleiim crudes and natural water, samples.