An overview of laboratory performance studies conducted by the IAEA for marine pollution studies of metals and organic contaminants

Aspects of the International Atomic Energy Agency (IAEA) Analytical Quality Control Services (AQCS) for marine environmental studies are discussed, focusing on recent laboratory performance studies (LPS) and the production of reference materials for trace metals and organic compounds in various marine matrices. The IAEA has organized seventeen global interlaboratory studies for a range of organic contaminants. Of note has been the inclusion of numerous polychlorinated biphenyl congeners (PCBs) and some sterols of anthropogenic origin. Concurrently, there have been eleven worldwide intercomparison exercises for trace metals in the marine environment, most of which included methylmercury. Although such interlaboratory studies can help improve performance in individual laboratories and regional laboratory networks, the results reveal that problems remain in the determination of some metals and many organic contaminants.     

Certifying the chemical composition of a biological material — a case study

A worldwide laboratory intercomparison was organized by the International Atomic Energy Agency's Analytical Quality Control Services (AQCS) involving the determination of trace elements in plant materials used for human consumption. The National Institute of Standard and Technology (NIST) Standard Reference Materials Program donated 5 kg of spinach designated for the production of the future Standard Reference Material SRM 1570a to this intercomparison; the AQCS provided a similar amount of cabbage. For the study, 150 units of each material were distributed and 114 laboratories reported results on both materials to AQCS. The results for the spinach, encompassing more than forty elements, have been compiled and evaluated; estimates of the elemental concentrations were made based on statistical evaluations, principles of analytical procedures and the laboratory performance indicated by the results on the cabbage material. Satisfactory estimates were obtained for 27 elements. Comparison with IAEA laboratory and NIST reference data did not reveal any significant bias that might have been introduced by the intercomparison approach or its evaluation.     

Use of reference materials in coastal monitoring quality assurance

The NOAA National Status and Trends (NS&T) Program determines the current status of, and changes over time in the environmental health of U.S estuarine and coastal waters. Concentrations of organic and inorganic contaminants are determined in bivalves, bottom-dwelling fish and sediments. The quality of the analytical data generated by the NS&T Program is over-seen by the performance-based Quality Assurance Project, which is designed to document sampling protocols, analytical procedures, and laboratory performance, and to reduce intralaboratory and interlaboratory variation. All NS&T cooperating laboratories are required to participate in yearly intercomparison exercises. The analysis of reference materials, such as the National Research Council of Canada's Certified Reference Materials (CRMs) and National Institute of Standards and Technology's (NIST) Standard Reference Materials (SRMs), and of control materials, is required. Because of the need for marine matrix reference materials and standards, NOAA contributed to the production of eight NIST SRMs and seven internal standard solutions. Analytical data from all control materials and all matrix reference materials are reported to the Program office.     

IAEA reference materials for quality assurance of marine radioactivity measurements

The IAEA's Marine Environment Laboratory has been assisting laboratories in Analytical Quality Control Services (AQCS) for the analysis of radionuclides in the marine environment since the early seventies. AQCS through world-wide and regional intercomparison exercises and the provision of reference methods and reference materials (RM) have been recognized as an important component of quality assurance/quality control. A total of 43 intercomparison exercises were organized and 37 RM were produced for marine radioactivity studies. All important marine matrices were covered, e.g., seawater, marine sediments of different chemical compositions, fish, shellfish and seaplants. RM were prepared from samples collected at contaminated sites (e.g., the Irish Sea, the Baltic Sea, the Arabian Sea, Mururoa and Bikini Atolls, etc.) as well as from sites affected only by global fallout (e.g., the Pacific Ocean). Available RM are listed in the IAEA biennial catalogue and can be purchased at a minimal price. An overview of prepared RM for radionuclides in marine matrices is presented and discussed in more detail.     

Certification of trace and major elements and methylmercury concentrations in a macroalgae (Fucus sp.) reference material, IAEA-140

A marine reference material, IAEA-140, prepared with a macroalgae (Fucus sp.) was recently produced by the International Atomic Energy Agency and certified for trace and major elements and for methylmercury (MeHg). Certification of this material was achieved as an outcome of an international analytical intercomparison study which resulted in 116 independent sets of results reported by participants from 54 countries. The statistical evaluation of the collected data and the criteria used for assignment of the mean and uncertainty values are described. The analysis of data allowed to certify concentration values for 24 elements and MeHg, and to provide information values for another 10 elements. Regarding the elements which could be given certified values, between two and eight different instrumental methods were used to measure metal concentrations, and four independent analytical procedures were used to measure MeHg concentrations. In order to assess the results of the certification procedure, a comparison was made between the certified values obtained from the world-wide intercomparison results and the values obtained from a small subgroup of well-qualified laboratories. The means and 95% confidence intervals for reference values obtained by the two methods are similar for most elements showing that the usual method of certification used by the IAEA, based on large groups of participants, is indeed pertinent.     

Critical evaluation of laboratory performance from IAEA-452 (fish scallop) inter-comparison exercise results

The International Atomic Energy Agency Marine Environmental Laboratory (IAEA-MEL) conducted an intercomparison exercise for the “Trace elements and methyl mercury in fish scallop: IAEA-452” in 2009. The Neutron Activation Analysis (NAA) laboratory at PINSTECH, Pakistan took part in this exercise. Comparison with the IAEA results showed that of the 18 elements reported to the IAEA 7 had unacceptable z-scores while the data for two elements was questionable (2< |z-score| <3). Upon investigation it was discovered that the large number of elements having unacceptable z-scores was due to human error and the greater difficulty in analyzing biological samples which have low amounts of trace elements. Therefore selection of values corresponding to matrix matched reference materials (RMs), such as IAEA-436 and IAEA-407, and to non-interfering peaks the results obtained became comparable to the IAEA results with only the result for As having |z-score|> 3.     

The International Atomic Energy Agency's program on analytical quality control

For more than thirty years the International Atomic Energy Agency has been assisting laboratories in Member States in maintaining and improving the reliability, i.e. the quality of analyses of nuclear, industrial, environmental and biological materials, and materials of marine origin. Through the Analytical Quality Control Services (AQCS) the Agency initiates and supports improvements in the accuracy of analytical chemical and radiometric measurements and their traceability to basic standards. This is achieved by organizing worldwide and regional intercomparison exercises and by distributing reference materials. The latest biological and environmental reference and intercomparison materials are presented and general information is given on the preparation of materials, intercomparison runs, and the evaluation of reference data. Means to improve the quality of intercomparison results are presented and discussed.     

Neutron Activation Analysis in the IAEA Projects on Air Pollution

The International Atomic Energy Agency (IAEA) has been promoting studies on air pollution since 1992. During the period 1992–1999 there have been six major co-ordinated research and regional technical co-operation projects in which 77 counterparts from 40 Member States actively participated. The studies supported by the IAEA have included ambient and workplace airborne particulate matter, the use of appropriate plant biomonitors and a series of laboratory intercomparison exercises in support to these projects. Recent and current IAEA projects in this field are reviewed in the light of the application of neutron activation analysis, which has been used as a major analytical technique by more than two thirds of the counterparts, and contributed also approximately two thirds of all analytical results for the intercomparison exercises.     

Experience gained through intercomparison of long-lived radionuclide measurements on marine environmental matrices

Within the last five years the International Laboratory of Marine Radioactivity at Monaco has organized seven intercomparison exercises worldwide on natural materials of marine origin comprising sea water (SW-N-2), sediment (SD-N-1/1, SD-N-1/2, SD-N-2), seaweed (AG-B-1) and fish flesh (MA-B-3/1, MA-B-3/2). Results on man-made (⁵⁴Mn,⁶⁰Co,⁶⁵Zn,⁹⁰Sr,⁹⁹Tc,¹³⁴Cs,¹³⁷Cs,²³⁸Pu,^239,240Pu,²⁴¹Am) and natural radionuclides were collected and evaluated. Reference values were established for a number of them. In the paper are discussed various aspects of the intercomparison exercises.     

Certification of trace and major elements and methylmercury concentrations in a macroalgae (Fucus sp.) reference material, IAEA-140

A marine reference material, IAEA-140, prepared with a macroalgae (Fucus sp.) was recently produced by the International Atomic Energy Agency and certified for trace and major elements and for methylmercury (MeHg). Certification of this material was achieved as an outcome of an international analytical intercomparison study which resulted in 116 independent sets of results reported by participants from 54 countries. The statistical evaluation of the collected data and the criteria used for assignment of the mean and uncertainty values are described. The analysis of data allowed to certify concentration values for 24 elements and MeHg, and to provide information values for another 10 elements. Regarding the elements which could be given certified values, between two and eight different instrumental methods were used to measure metal concentrations, and four independent analytical procedures were used to measure MeHg concentrations. In order to assess the results of the certification procedure, a comparison was made between the certified values obtained from the world-wide intercomparison results and the values obtained from a small subgroup of well-qualified laboratories. The means and 95% confidence intervals for reference values obtained by the two methods are similar for most elements showing that the usual method of certification used by the IAEA, based on large groups of participants, is indeed pertinent.     

NAA as viewed from the perspective of international atomic energy agency intercomparison tests

Results of several IAEA intercomparison runs organized over the last 8 years are analyzed from the point of view of contribution and performance of NAA as compared to other techniques. It is shown that NAA is the method of good accuracy and precision providing on average greater share of results than any other single analytical technique. The prominent position of NAA among other methods used in trace analyses seems to be firmly established and there are no signs that there might be any change of the trend in the nearest future.     

Certification for trace elements and methyl mercury mass fractions in IAEA-452 scallop (Pecten Maximus) sample

A marine certified reference material (CRM), IAEA-452, prepared with scallop (Pecten maximus) sample was recently produced by the International Atomic Energy Agency (IAEA) and certified for trace elements and methyl mercury (MeHg). The Scallop (Pecten maximus) sample is commonly found and consumed seafood and is also used as bio-indicators for trace metal contamination in marine pollution studies. This paper presents the sample preparation methodology, material homogeneity and stability studies, evaluation of certification campaign results, the assignment of property values and their associated uncertainty. The reference values and associated expanded uncertainty for 9 trace elements (As, Cd, Cr, Cu, Fe, Hg, Mn, Pb and Zn) and MeHg in scallop sample are established. The informative value for one more element (Ni) is also given. The new CRM can be used for the development and validation of analytical methods for determination of trace elements and methyl mercury in seafood and also for quality assurance/quality control purposes.     

Purity assessment using the mass balance approach for inorganic in-house certified reference material production at Inmetro

Accreditation and Quality Assurance - The production of Certified Reference Materials (CRMs) is one of the essential activities of the National Institute of Metrology, Quality and Technology...     

Certification of two human hair reference materials issued by the International Atomic Energy Agency

Two new human hair reference materials, with different levels of mercury and methylmercury, have been developed and characterized by the International Atomic Energy Agency, for use in validation of measurements for mercury exposure. The set of materials consists of IAEA-086, with a low level of methylmercury, and IAEA-085, with an elevated methylmercury level. An international intercomparison exercise was carried out, and 68 institutes from 40 countries have contributed data. Based on the evaluation of the results from the intercomparison and analyses by expert laboratories, values of 23.2 and 0.57 mg/kg total mercury are recommended for IAEA-085 and IAEA-086, respectively. Values for methylmercury are recommended at 22.9 mg/kg, MeHg as Hg, for IAEA-085, and at 0.26 mg/kg, MeHg as Hg, for IAEA-086. Recommended and information values are also given for other selected trace elements.     

Certification of the methylmercury content in SRM 2977 Mussel Tissue (organic contaminants and trace elements) and SRM 1566b Oyster Tissue

The methylmercury content in two new marine bivalve mollusk tissue Standard Reference Materials (SRMs) has been certified using results of analyses from the National Institute of Standards and Technology (NIST) and two other laboratories. The certified concentrations of methylmercury were established based on the results from four and six different (independent) analytical methods, respectively, for SRM 1566b Oyster Tissue (13.2 ± 0.7 μg/kg) and SRM 2977 Mussel Tissue (organic contaminants and trace elements) (36.2 ± 1.7 μg/kg). The certified concentration of methylmercury in SRM 1566b is among the lowest in any certified reference material (CRM).     

Inter-laboratory comparisons: Determination of actinides in excreta

Inter-laboratory tests are a means of assessing the analytical coherence of medical laboratories. In radiotoxicology, this kind of exercise makes it possible to keep up with laboratory know-how and with the evolution and relative performances of analytical techniques (precision and reproducibility). However, the goal of the laboratories taking part in these annual exercises is not only to check the accuracy of their results. The analytical discussions and the chance to compare experiences enrich the group's general competence.French biologists have been organizing annual radiotoxicology intercomparison exercises since 1978. The exercises are carried out within the framework of a working group (GT1) operating under the aegis of the French Atomic Energy Commission's (CEA) Medical Coordinator. Using reports and diagrams which present the results obtained by the participants in the form of syntheses, the authors describe how the exercises for determining actinides in excreta (urine and faeces) are organized, how the results are evaluated in terms of the analytical methods used, and the improvements made in analytical and metrological performance.Up until 1985, these exercises were limited to French laboratories. Since then, the exercises have acquired an international dimension, opening up to include interested foreign radiochemists, initially from European laboratories, and now from laboratories worldwide. At the present time, 35 laboratories representing 9 countries take part regularly in these intercomparison exercises.     

Evaluation of the reproducibility standard deviation in the pesticide multi-residue methods on olive oil from past proficiency tests

Accreditation and Quality Assurance - The data reported in the frame of proficiency testing (PT) exercises organized from 2007 to 2016 have been statistically re-evaluated using Algorithm A of the...     

On the way to formal accreditation

The Radiochemical Laboratory participated in the Technical Co-operation (TC) Project on Quality Control and Quality Assurance for Nuclear Analytical Techniques RER/2/004 organized by the International Atomic Energy Agency (IAEA) during the period June 1999 and September 2001. Motivations, major goals of participation in the project, milestones of implementation of the project, establishing the quality system, improvements fulfilling both technical and management requirements as well as major achievements for future activities of the laboratory with respect to technical and financial conditions are discussed in detail.