Halocarbons in Aqueous matrices from the Rennick Glacier and the Ross Sea (Antarctica)

Aqueous matrices from Antarctica were analysed for three volatile chlorinated hydrocarbons (VCHCs): tetrachloromethane (CCl₄), trichloroethylene (C₂HCl₃) and tetrachloroethylene (C₂Cl₄). The matrices analysed were snow from Rennick Nèvè and Rennick Glacier sampled during the Italian Expeditions of 1995/96 and 1996/97, respectively, and seawater, pack ice, sea-microlayer, subsuperficial water and freshwater, collected during the Italian Expedition of 1997/98. Extractions from the aqueous matrices were carried out in Antarctica (the laboratories of the Italian Base, Terra Nova Bay). Because of the critical space–time conditions in these laboratories, an extraction procedure was developed, suitable for large volumes of water (10?L), in order to combine the extraction of other classes of organic compounds (polychlorinated biphenyls, polycyclic aromatic hydrocarbons and chlorinated pesticides) with those of our direct interest. The VCHC organic extracts were analysed in Italy by GC-ECD and GC-MS. The analyses confirmed the presence of the three halocarbons in Antarctica in quantities ranging from units to some dozens of nanograms per kilogram. The results were evaluated with respect to the local distribution of these compounds and their diffusion on a global scale.     

Improved analysis of volatile halogenated hydrocarbons in water by purge-and-trap with gas chromatography and mass spectrometric detection

An analytical system composed of a purge-and-trap injection system coupled to gas chromatography with mass spectrometric detection (PTI-GC-MS) specific for the analysis of volatile chlorinated hydrocarbons (VCHCs) (chloroform; 1,1,1-trichloroethane; tetrachloromethane; 1,1,2-trichloroethylene; tetrachloroethylene) and trihalomethanes (THMs) (chloroform; bromodichloromethane; dibromochloromethane; bromoform) in water was optimised. Samples were purged and trapped in a cold trap (-100 degrees C) fed with liquid nitrogen (cryo-concentration). In order to make this method suitable also for only slightly contaminated waters, some modifications were made to PTI sample introduction, in order to avoid any air intake into the system. PTI, GC and MS conditions were optimised for halogenated compound analysis and limits of detection (LOD) were evaluated. The proposed method allows analysis of samples whose concentrations range from microg/L to ng/L. It is, therefore, applicable to drinking waters, in analyses required by law, and to slightly contaminated aqueous matrices, such as those found in remote areas, in environmental monitoring. Moreover, by changing cold trap temperature, even sparkling mineral waters can be analysed, thus avoiding CO2 interference during the cryo-concentration phase. Our method has been successfully used on real samples: tap water, mineral water and Antarctic snow.     

Evaluation of volatile chlorinated hydrocarbons distribution along depth profiles in the Ross Sea, Antarctica

The presence and the distribution along depth profiles of volatile chlorinated hydrocarbons (VCHCs) were evaluated in seawater samples collected in the Ross Sea (Southern Ocean, Antarctica) during the 2002-2003 Italian expedition. Sampling areas were located where the Circumpolar Deep Water interacts with the shelf waters that supply the Ross Sea.The VCHCs investigated were: 1,1,1-trichloroethane (C₂H₃Cl₃), tetrachloromethane (CCl₄), trichloroethylene (C₂HCl₃), tetrachloroethylene (C₂Cl₄). The analytical procedure consisted of a liquid-liquid extraction carried out with n-hexane directly in Antarctica, followed by gas chromatographic analysis with electron capture detection carried out in Italy.Concentration levels for the VCHCs analysed ranged from digits to hundreds of ng/L according to the station, depth and substance considered. Important differences in concentration levels between the three stations near the Ross Ice Shelf and the two stations located in the Cape Adare area were observed. In particular the stations situated in the Cape Adare zone, at certain depths, showed a thermal inversion due to the mixing of the Circumpolar Deep Water with the waters generated inside the Ross Sea Basin. The lowest concentration levels were recorded at this temperature increase.     

Determination of Tetrachloroethylene and Other Volatile Halogenated Organic Compounds in Oil Wastes by Headspace SPME GC–MS

Oil wastes and slops are complex mixtures of hydrocarbons, which may contain a variety of contaminants including tetrachloroethylene (perchloroethylene, PCE) and other volatile halogenated organic compounds (VHOCs). The analytical determination of PCE at trace levels in petroleum-derived matrices is difficult to carry out in the presence of large amounts of hydrocarbon matrix components. In the following study, we demonstrate that headspace solid-phase microextraction (HS-SPME) combined with GC–MS analysis can be applied for the rapid measurement of PCE concentration in oil samples. The HS-SPME method was developed using liquid paraffin as matrix matching reference material for external and internal calibration and optimisation of experimental parameters. The limit of quantitation was 0.05 mg kg⁻¹, and linearity was established up to 25 mg kg⁻¹. The HS-SPME method was extended to several VHOCs, including trichloroethylene (TCE) in different matrices and was applied to the quantitative analysis of PCE and TCE in real samples.     

Purge efficiency in the determination of trihalomethanes in water by purge-and-trap gas chromatography

Purge-and-trap gas chromatography-mass spectrometry (PT-GC-MS) has become an accepted method for the analysis of trihalomethanes (THMs) in water. The purge-and-trap technique is based on an efficient transfer of volatile organic compounds from the liquid (contained in the purge chamber) to the gaseous phase by bubbling with an inert gas. The aim of this work was to study the purge system's efficiency by means of several consecutive purge cycles lasting 11 min each of the same liquid sample. The concentration range chosen of THMs was very wide [5-200 μg L⁻¹]. The inert gas flow rate was 40 mL min⁻¹, and experiments were performed at temperatures of 25, 35 and 50 °C. Bromoform (CHBr₃), the least volatile compound, needed 19 cycles to be purged quantitatively at a concentration of 200 μg L⁻¹ and only 7 cycles at 5 μg L⁻¹ for a 25 mL sample at 25 °C. Chloroform (CHCl₃), the most volatile compound, required 4 cycles to be fully extracted at 200 μg L⁻¹ and 2 at 5 μg L⁻¹. Finally, Novak's theoretical model, based on the distribution constant between gas and liquid phases, was used to correlate the THMs purging extraction data.     

Miniaturized dielectric barrier discharge induced chemiluminescence for detection of volatile chlorinated hydrocarbons separated by gas chromatography

A new analytical method was proposed for the detection of volatile chlorinated hydrocarbons (VCHCs) including dichloromethane, 1,2-dichloroethane, chloroform, tetrachloromethane, perfluoromethane and bromoform after gas chromatographic (GC) separation. Atmospheric pressure dielectric barrier discharge (DBD) was miniaturized and used as a GC detector by using chemiluminescence (CL) emission from the reaction of DBD-split VCHCs with luminol solution. The miniaturized DBD-CL detector possessed the advantages of simple construction, very low power consumption, and high sensitivity to many volatile halocarbons, especially VCHCs. The parameters of the detector were optimized by using dichloromethane as a typical analyte. Under the optimized experimental conditions, the limit of detection (LOD) down to sub-nmol can be achieved.     

Microwave induced plasma atomic emission spectrometry: a suitable detection system for the determination of volatile halocarbons

Microwave induced plasma atomic emission spectrometry (MIP-AES), a highly sensitive detection system for organometal compounds, was coupled to an automated purge and trap gas chromatographic system for the determination of volatile halogenated hydrocarbons in environmental water samples. Optimisation of the parameters affecting the injection and detection system led to relative detection limits from 1 to 14 ng · L^–1 for chlorine- and bromine-compounds and from 10 to 75 ng · L^–1 for iodine-compounds, on basis of a 10 mL sample volume. A comparison of the analytical characteristics between atomic emission detection (AED) and electron capture detection (ECD) showed a lower sensitivity of the atomic emission detector for halocarbons, but the detection thresholds are low enough to use the method for the determination of volatile halocarbons in trace level concentrations. The ability of the atomic emission detector provides increased selectivity for monitoring individual halogenated compounds under simplified and rapid chromatographic conditions, within a total analysis time of only 30 min. The method was applied with gas chromatographic separation for the analysis of sea water samples. Concentrations for the different elements between 0.05 and 15.28 μg · L^–1 were determined.     

A highly thermal-resistant electrospun-based polyetherimide nanofibers coating for solid-phase microextraction

A high-temperature-resistant solid-phase microextraction (SPME) fiber was prepared based on polyetherimide (PEI) by the electrospinning method. The PEI polymeric solution was converted to nanofibers using high voltages and directly coated on a stainless steel SPME needle. The scanning electron microscopy images of PEI coating showed fibers with diameter range of 500–650 nm with a homogeneous and smooth surface morphology. The SPME nanofibers coating was optimized for PEI percentage, electrospinning voltage, and time. The extraction efficiency of the coating was investigated for headspace SPME of some environmentally important polycyclic aromatic hydrocarbons from aqueous samples followed by gas chromatography–mass spectrometry measurement. In addition, the important extraction parameters including extraction temperature, extraction time, ionic strength, as well as desorption temperature and time were investigated and optimized. The detection limits of the method under optimized conditions ranged from 1 to 5 ng L^?1 using time-scheduled selected ion monitoring mode. The relative standard deviations of the method were between 1.1 and 7.1 %, at a concentration level of 500 ng L^?1. The calibration curves of polycyclic aromatic hydrocarbons showed linearity in the range of 5–1000 ng L^?1. The developed method was successfully applied to real water samples and the relative recovery percentages obtained from the spiked water samples were from 84 to 98 % for all the selected analytes except for acenaphthene which was from 75 to 106 %.     

Determination of a wide range of volatile and semivolatile organic compounds in snow by use of solid-phase micro-extraction (SPME)

Quantification and transformation of organic compounds are pivotal in understanding atmospheric processes, because such compounds contribute to the oxidative capacity of the atmosphere and drive climate change. It has recently been recognized that chemical reactions in snow play a role in the production or destruction of photolabile volatile organic compounds (VOC). We present an environmentally friendly method for determination of VOC and semi-VOC in snow collected at three sites—remote, urban, and (sub-)arctic. A solid-phase micro-extraction (SPME) procedure was developed and (semi-)VOC were identified by gas chromatography with mass spectrometric detection (GC–MS). A broad spectrum of (semi-)VOC was found in snow samples, including aldehydes, and aromatic and halogenated compounds. Quantification was performed for 12 aromatic and/or oxygenated compounds frequently observed in snow by use of neat standard solutions. The concentrations detected were between 0.12 (styrene and ethylbenzene) and 316 μg L⁻¹ (toluene) and limits of detection varied between 0.11 (styrene) and 1.93 μg L⁻¹ (benzaldehyde). These results indicate that the SPME technique presented is a broad but selective, versatile, solvent-free, ecological, economical, and facile method of analysis for (semi-)VOC in natural snow samples.     

GC determination of halogenated olefins by photoionization and hall electrolytic conductivity detectors in series in matrices of hydrofluorocarbons and hydrochlorofluorocarbons

Summary Gas chromatography (GC) with photoionization (PI) and Hall electrolytic conductivity (E1C) detectors connected in series, has been used for the determination of chlorofluorinated olefins. The separation of different standard solutions containing eight chlorofluorinated ethenes in nitrogen and in halogenated matrices has been performed in wide bore capillaries, 0.53 mm i.d., and normal capillaries, 0.32 mm i.d. The quality of separation is obviously influenced by their limited load capacity and by the response time of the Hall detector. At concentrations 1–150 μL L⁻¹ halogenated olefins, both PI and ElC detectors have linear response and can detect minimum levels of 0.2–0.5 ng and 0.4–1.2 ng, respectively. The PID is particularly selective toward halogenated olefins and is extremely useful for the determination of traces of unsaturated halogenated hydrocarbons in a matrix of saturated homologues. The results of this work are of great interest for the detection of chorofluorinated olefins, highly toxic compounds usually formed as by-products in the industrial production of hydrofluorocarbons and hydrochloro-flurocarbons.     

Problems of the control of volatile halogenated hydrocarbons in tap and waste waters

The concentration of volatile halogenated hydrocarbons in chlorinated tap water does not stay constant but increases during its passage through water supply systems, which indicates a certain incompleteness and the continuation of the transformation of humic substances upon the chlorination of water. The known official (certified) procedures, including the State Standard ones, seven in number, which are based on headspace gas chromatography, do not take into account such a peculiarity of tap water and deal with the quantification of free halogenated derivatives of hydrocarbons only. The comparative evaluation of official procedures is performed, and the sources of errors exceeding the acceptable level are inventoried; methods of optimization of all analytical steps are proposed to elaborate procedures ensuring the minimal error and reliable information on the concentration of volatile halogenated hydrocarbons in tap and waste waters.     

Solid-phase microfibers based on modified single-walled carbon nanotubes for extraction of chlorophenols and organochlorine pesticides

Solid-phase microextraction (SPME) based on carboxylated single-walled carbon nanotube fibers was used to extract several chlorophenols (CPs) and organochlorine pesticides (OCPs) from aqueous samples prior to their determination by GC with electron capture detection. The main parameters affecting microextraction (temperature, time, stirring rate and salting-out effect) and the conditions of the thermal desorption in the GC injector were optimized. Compared with commercial SPME fibers, the fiber presented better selectivity and sensitivity. Linear response was found for the concentration range between 2 and 1000 ng L^?1 (20–1000 ng L^?1 for CPs), and the limits of detection were in the range from 0.07 to 4.36 ng L^?1. The repeatability expressed as relative standard deviation ranged from 4.1 % to 8.2 % and the fiber-to-fiber reproducibility for four prepared fibers was between 6.5 % and 10.8 %. The method was successfully applied to the analysis of CPs and OCPs in lake water and waste water samples. Recovery was tested with spiked lake water and waste water samples, with values ranging from 89.7 % to 101.2 % in case of waste water samples.

Determination of Pyrethroid Pesticides in Environmental Waters Based on Magnetic Titanium Dioxide Nanoparticles Extraction Followed by HPLC Analysis

A simple and fast method based on magnetic separation for extraction of pyrethroid pesticides including beta-cyfluthrin, cyhalothrin and cyphenothrin from environmental water samples has been established. Magnetic titanium dioxide was used as sorbent, which was synthesized by coating TiO₂ on Fe₃O₄ in liquid-state co-precipitation method. The sorbent has been characterized by scanning electron microscopy and Fourier-transform infrared spectrometry, and the magnetic properties were investigated with physical property measurement system. Various parameters affecting the extraction efficiency were evaluated to achieve optimal condition and decrease ambiguous interactions. The analytes desorbed from the sorbent were detected by high performance liquid chromatography. Under the optimal condition, the linearity of the method is in the range of 25–2,500 ng L^?1. The detection limits and quantification limits of pyrethroid pesticides are in the range of 2.8–6.1 ng L^?1 and 9.3–20.3 ng L^?1, respectively. The relative standard deviations of intra- and inter-day tests ranging from 2.5 to 7.2 % and from 3.6 to 9.1 % were obtained. In all three spiked levels (25, 250 and 2,500 ng L^?1), the recoveries of pyrethroid pesticides were in the range of 84.5–94.1 %. The proposed method was successfully applied to determine pyrethroids in three water samples. Cyphenothrin was found in one river water near farmlands, and its concentration was 52 ng L^?1.     

Hollow-Fibre Liquid-Phase Microextraction for the Determination of Polycyclic Aromatic Hydrocarbons in Johannesburg Jukskei River, South Africa

A simple, rapid and environmentally friendly hollow-fibre liquid-phase microextraction (HF-LPME) technique was developed for the quantitative determination of polycyclic aromatic hydrocarbons (PAHs) in aqueous samples. GC-MS was then used as the method of analysis. The HF-LPME technique involves extraction of PAHs from a 20-mL sample containing 20 % acetonitrile as a modifier. The PAHs were extracted into a 5-cm hollow fibre filled with heptane as organic solvent. At a stirring speed and extraction time of 600 rpm and 30 min, respectively, the acceptor solvent was then collected to be analysed. Parameters that affect the extraction efficiency were optimised in order to achieve high enrichment of the analytes. In order to evaluate the practical applicability of the HF-LPME technique, the performance of the method was compared to solid-phase extraction using spiked deionised water and real water samples. The obtained concentration enrichment factors ranged from 48 to 95 for HF-LPME and 81–135 for SPE, depending on the individual PAH. The detection limit ranged from 23 to 95 ng L^?1 for HF-LPME and 20–52 ng L^?1 for SPE. Water samples from the Johannesburg area, South Africa, were analysed using both extraction methods and the results were in good agreement. The relative standard deviations were less than 12 % for both methods. In this comparison, SPE was found to give high concentration enrichment factors and recovery, whereas faster and cheaper analyses were achieved with HF-LPME. The concentration of PAHs found could be arranged in the following order: phenanthrene > acenaphthene > fluoranthene > naphthalene > pyrene.     

Boron nitride nanotubes as novel sorbent for solid-phase microextraction of polycyclic aromatic hydrocarbons in environmental water samples

Boron nitride nanotube (BNNT) is a novel material that shows potential ability in capturing organic pollutants. In this study, BNNTs fixed on a stainless steel fiber by a sol–gel technique were used as sorbent for solid-phase microextraction. Five polycyclic aromatic hydrocarbons with different numbers of aromatic rings were selected as target analysts. Gas chromatography coupled with tandem mass spectrometry was used for detection and quantitative determination. Under optimized conditions, the experimental results show a wide range of linearity (1 to 1,000 ng L^?1), less than 10.1 % repeatability of relative standard deviation, and low detection limits (0.08 to 0.39 ng L^?1). In addition, the fabricated fiber offered good thermal and chemical stability. The proposed method was successfully applied for the analysis of real water samples, and satisfactory results were obtained with relative recoveries ranging from 80.2 to 116.8 %. The results demonstrated that BNNTs could be used as sorbent for the analysis of environmental pollutants at trace levels.     

QuEChERS and solid phase extraction methods for the determination of energy crop pesticides in soil,plant and runoff water matrices

QuEChERS and solid phase extraction (SPE) methods were applied for determining four herbicides (metazachlor, oxyfluorfen, quizalofop-p-ethyl, quinmerac) and one insecticide (α(±)-cypermethrin) in runoff water, soil, sunflower and oilseed rape plant matrices. Determination was performed using gas chromatography mass spectrometry (GC-MS), whereas high-pressure liquid chromatography mass spectrometry (HPLC-MS) was used for quinmerac. In all substrates linearity was evaluated using matrix-matched calibration samples at five concentration levels (50–1000 ng L^?1 for water, 5–500 μg kg^?1 for soil and 2.5–500 μg kg^?1 for sunflower or oilseed rape plant). Correlation coefficient was higher than 0.992 for all pesticides in all substrates. Acceptable mean recovery values were obtained for all pesticides in water (65.4–108.8%), soil (70.0–110.0%) and plant (66.1–118.6%), with intra- and inter-day RSD% below 20%. LODs were in the range of 0.250–26.6 ng L^?1 for water, 0.10–1.8 μg kg^?1 for soil and 0.15–2.0 μg kg^?1 for plants. The methods can be efficiently applied for field dissipation studies of the pesticides in energy crop cultivations.     

Simultaneous Determination of Gallium(III) and Indium(III) in Urine and Water Samples with Cloud Point Extraction and by Inductively Coupled Plasma Optical Emission Spectrometry

A simple, sensitive, and selective method for the determination of gallium and indium in different samples at trace levels is presented. This method was based on complexation of analyzes with 2-(5-bromo-2- pyridylazo)-5-diethylaminophenol (5-Br-PADAP) in the presence of t-octylphenoxy-polyethoxyethanol (Triton X-100). After phase separation, the analyzed concentrations were determined by inductively coupled plasma optical emission spectrometry. Quantitative extraction of gallium and indium was performed at pH 7.0, 1.7 mmol L^?1, 5-Br-PADAP, 1.3% (w/v) Triton X-100 and at 75°C. The relative standard deviations (RSD) of this method were between 0.3% and 1.6% (C = 20 ng mL^?1, n = 9). The calibration curve is linear over the concentration range 6–200 ng mL^?1 for gallium and 2–200 ng mL^?1 for indium, respectively. The limits of detection (LOD) for gallium and indium were 0.72 and 0.28 ng mL^?1, respectively. The results showed the developed method was not susceptible to matrix effects, providing recoveries between 98% and 102%. The accuracy of the developed method was evaluated by the analysis of spiked certified reference materials. The developed method was successfully applied to gallium and indium determination in urine and lake water with satisfactory results.     

Evaluation of an automatic sampling gas chromatographic–mass spectrometric instrument for continuous monitoring of trace anthropogenic gases

Continuous monitoring of the atmospheric volatile halogenated hydrocarbons is needed in light of the role played by these compounds in global climate change phenomena. The analytical methodology described in the following implies the use of a gas chromatographic–mass spectrometric system equipped with a sampling/pre-concentration unit, for the simultaneous and continuous analysis of a number of halogenated hydrocarbons present in the atmosphere at concentration levels ranging from a few to hundreds of part per trillion by volume. The optimization of the analytical procedure in terms of efficiency, linearity, and reproducibility is reported together with some of the results obtained in the frame of a monitoring activity carried out on a remote mountain station in central Italy.     

Multiwalled Carbon Nanotubes as SPE Adsorbents for Simultaneous Determination of Seven Sulfonylurea Herbicides in Environmental Water by LC–MS–MS

An effective and rapid method was developed for simultaneous determination of seven sulfonylurea herbicides in environmental water using multiwalled carbon nanotubes as solid-phase extraction sorbent coupled with liquid chromatography–tandem mass spectrometry. Important parameters influencing the extraction efficiency such as pH of the sample solution, flow rate of sample loading, the eluent and its volume were optimized. Under optimum conditions, good linearity was obtained for all herbicides (r ² > 0.99) over the range of 0.05–5,000 ng L^?1, and precisions (RSD) for nine replicate measurements of a standard mixture of 200 ng L^?1 were 1.9–7.4%. The limits of detection and quantification were 0.01–0.20 and 0.05–1.00 ng L^?1, respectively. The proposed method was successfully applied to the analysis of tap water, spring water, ground water and well water, and mean recoveries for seven analytes at three spiked concentration levels were from 81.5 to 110.5% with RSDs between 0.3 and 7.0%. The results showed that the established method has wide application to analyze sulfonylurea herbicides at trace level in water.     

Stir-bar-sorptive extraction and liquid desorption combined with large-volume injection gas chromatography–mass spectrometry for ultra-trace analysis of musk compounds in environmental water matrices

Stir-bar-sorptive extraction with liquid desorption followed by large-volume injection and capillary gas chromatography coupled to mass spectrometry in selected ion monitoring acquisition mode (SBSE–LD/LVI-GC–MS(SIM)) has been developed to monitor ultra-traces of four musks (celestolide (ADBI), galaxolide (HHCB), tonalide (AHTN) and musk ketone (MK)) in environmental water matrices. Instrumental calibration (LVI-GC–MS(SIM)) and experimental conditions that could affect the SBSE-LD efficiency are discussed. Assays performed on 30-mL water samples spiked at 200 ng L^?1 under optimized experimental conditions yielded recoveries ranging from 83.7?±?8.1% (MK) to 107.6?±?10.8% (HHCB). Furthermore, the experimental data were in very good agreement with predicted theoretical equilibria described by octanol–water partition coefficients (K _PDMS/W?≈?K _O/W). The methodology also showed excellent linear dynamic ranges for the four musks studied, with correlation coefficients higher than 0.9961, limits of detection and quantification between 12 and 19 ng L^?1 and between 41 and 62 ng L^?1, respectively, and suitable precision (< 20%). Application of this method for analysis of the musks in real water matrices such as tap, river, sea, and urban wastewater samples resulted in convenient selectivity, high sensitivity and accuracy using the standard addition methodology. The proposed method (SBSE–LD/LVI-GC–MS(SIM)) was shown to be feasible and sensitive, with a low-sample volume requirement, for determination of musk compounds in environmental water matrices at the ultra-trace level, overcoming several disadvantages presented by other sample-preparation techniques.