Silver nanoparticle loaded on activated carbon and activated carbon modified with 2-(4-isopropylbenzylideneamino)thiophenol (IPBATP) as new sorbents for trace metal ions enrichment

The efficiencies and performances of silver nanoparticle loaded activated carbon modified with 2-(4-isopropylbenzylideneamino)thiophenol (IPBATP-Ag-NP-AC) and activated carbon modified with IPBATP (IPBATP-AC), as new sorbents, were evaluated for separation and preconcentration of Cu²⁺, Zn²⁺, Co²⁺, Cd²⁺ and Pb²⁺ ions from real environmental samples. The retained metals content was reversibly eluted using 5?mL of CH₃COOH (6.0?mol?L^?1) and/or 10?mL of 4.0?mol?L^?1 HNO₃ for IPBATP-Ag-NP-AC and IPBATP-AC, respectively. The experimental parameters influence the recoveries of metal ions including pH, amounts of ligand and supports, condition of eluents, sample and eluent flow rates of has been investigated. The preconcentration factors were found to be 100 for Zn²⁺, Cd²⁺, Co²⁺, Cu²⁺ and 50 for Pb²⁺ ions using IPBATP-Ag-NP-AC, and 50 for Zn²⁺, Cd²⁺, Co²⁺, Cu²⁺ and 25 for Pb²⁺ ions using IPBATP-AC. The detection limit of both SPE-based sorbents was between 1.6–2.5?ng?mL^?1 for IPBATP-AC and 1.3–2.5?ng?mL^?1 for IPBATP-Ag-NP-AC. The proposed methods have been successfully applied for the extraction and determination of the understudy metal ions content in some real samples with extraction efficiencies higher than 90% and relative standard deviations (RSD) lower than 2.4%.     

Study on the synthesis of novel fluorescent macrocyclic sensors and their sensitive properties for Cu2+ and Fe3+ in aqueous solution

In this work, we synthesised and characterised three novel fluorescence macrocyclic sensors containing optically active dansyl groups. The studies for the interaction of the synthesised compounds with various mental ions (Li⁺, Na⁺, K⁺, Ag⁺, Mg²⁺, Ca²⁺, Ba²⁺, Pb²⁺, Zn²⁺, Co²⁺, Cd²⁺, Hg²⁺, Ni²⁺, Cu²⁺, Mn²⁺, Cr³⁺, Al³⁺, Fe³⁺) were performed by fluorescence titration, Job’s plot, ESI-MS and DFT calculations. The results showed that the sensors 1a–1c displayed selective recognition for Cu²⁺ and Fe³⁺ ions and formed stoichiometry 1:1 complex through PET mechanism in DMSO/H₂O solution (1:1, v/v, pH 7.4 of HEPES). The binding constant (K) and detection limit were calculated.     

Solid phase extraction of heavy metals on chemically modified silica-gel with 2-(3-silylpropylimino) methyl)-5-bromophenol in food samples

Trace amounts of Fe³⁺, Pb²⁺, Cu²⁺, Ni²⁺, Co²⁺ and Zn²⁺ ions were efficiently enriched following complexation with silica-gel chemically functionalized with 2-((3-silylpropylimino)methyl)-5-bromophenol. The enriched metal ions efficiently eluted with 6?mL of 4.0?mol?L^?1 nitric acid and their metal contents were determined by flame atomic absorption spectrometry (FAAS). The influences of the analytical parameters and experimental variables on the recoveries of the metal ions under study were investigated and optimized. The method has high sorption preconcentration efficiency even in the presence of various interfering ions. At optimum values of all variables the method is applicable for analysis of real samples with recoveries in the range of 95 to 105% with RSD lower than 4.2% and detection limits between 1.4 and 2.8?µg?L^?1.     

Graphene quantum dots with Zn2+ and Ni2+ conjugates can cleave supercoiled DNA

Graphene quantum dots (GQDs), inheriting the superb property of graphene oxide, possess smaller lateral size and high biocompatibility, thus having potential in biomedical applications. We previously discovered that GQDs, combining with Cu²⁺ ions, could cleave DNA primarily through an oxidative pathway; yet, oxidative DNA cleavage is not practically preferred in biology. In this work, we explore the DNA cleavage ability of GQDs with Zn²⁺ and Ni²⁺. Zn²⁺ and Ni²⁺ alone are incapable of cleaving supercoiled DNA, but when combining with the GQDs, Zn²⁺ and Ni²⁺ exhibit DNA cleavage activity. However, the activity of these two systems is much lower than that of GQDs/Cu²⁺, and GQDs/Ni²⁺ is less active than GQDs/Zn²⁺. The functional mechanism of GQDs/Ni²⁺ and GQDs/Zn²⁺ is different from that of GQDs/Cu²⁺. The GQDs play a key role in the two systems; the redox inactive Zn²⁺ and Ni²⁺ ions assist to generate the oxidative species that eventually lead to the DNA cleavage. The current results together with our previous result indicate that GQDs together with metal ions can cleave supercoiled DNA, and their cleavage activities depend on the properties of metal ions: for redox active metal ions, metal ions play key roles, for redox inactive metal ions, GQDs are dominant.     

A hybrid mesoporous material functionalized by 1,8-naphthalimide-base receptor and the application as chemosensor and absorbent for Hg2+ in water

A novel hybrid material (SBA-P1) is prepared through the functionalization of mesoporous silica (SBA-15) with a 1,8-naphthalimide-based dye by sol-gel reaction. The characterization results of elemental analysis (EA), X-ray powder diffractometer (XRD) and spectroscopic methods demonstrate the fluorescence dye P1 is successfully grafted onto the inner surface of SBA-15 and the organized structure is preserved. SBA-P1 can detect Hg²⁺ with high selectivity to Cu²⁺, Zn²⁺, Cd²⁺, Pb²⁺, Mn²⁺, Ni²⁺, Co²⁺, Ag⁺, Cr³⁺, and Mg²⁺, Ca²⁺, Li⁺, Na⁺, K⁺ in water and sensitivity to environmentally relevant mercury in complex natural samples. The quenching fluorescence detection is also reversible by treating with EDTA/base. Furthermore, its fluorescence intensity keeps stable in the physiologically relevant pH range. The extraction ability of SBA-P1 is also estimated by inductively coupled plasma source mass spectrometer (ICP), showing that approximately 90% of the Hg²⁺ ion is extracted. These results imply that the hybrid material has potential application for sensing and removing of Hg²⁺ ions in waste water and working as toxicide for acute mercury poisoning.     

Highly selective colorimetric naked-eye Cu2+ detection using new bispyrazolone silver nanoparticle-based chemosensor

In this work, we have successfully developed novel silver nanoconjugates of pyrazolone analogue and screened its chemosensing potential in aqueous medium. Bispyrazolone silver nanoparticles (Bispyra-AgNPs) were synthesised and characterised through FTIR, UV-visible spectroscopy and atomic force microscopy. The sensing ability was explored towards Ca²⁺, Cd²⁺, Co²⁺, Cu²⁺, Fe²⁺, Li⁺, Pb²⁺, La³⁺, Hg²⁺, Mg²⁺, Ni²⁺ and Ba²⁺ metal ions, respectively. Bispyra-AgNPs showed a highly quenching potential in selective recognition of Cu²⁺and colour of the solution immediately turned from yellow to purple, after the addition of Cu²⁺ in to the solution. The developed method also displayed a remarkable selectivity for Cu²⁺ over others interfering metal ions. The binding ratio and stoichiometry of host-guest complex was found to be 1:1 and determined by Job’s method. The propose method is facile and sensitive to detect Cu²⁺ with detection limit of 10 µM.     

MnO2 nanozyme induced the chromogenic reactions of ABTS and TMB to visual detection of Fe2+ and Pb2+ ions in water

In this study, we used a simple and rapid colourimetric reaction for visual sensing of Fe²⁺ and Pb²⁺ ions in water by employing nano-MnO₂ as a natural oxidase mimic to respectively catalyse ABTS and TMB in citrate-phosphate buffer solution (C-PBS) at 25°C and pH 3.8. It was found that nano-MnO₂ possessed highly oxidase-mimicking activity with the K_m values of 0.030 and 0.027 toward ABTS and TMB, respectively, indicating TMB had a stronger affinity on nano-MnO₂ than ABTS. Interestingly, the presence of 0.01 mmol·L^?1 Fe²⁺/Pb²⁺ ion was able to significantly down-regulate the activity of MnO₂ nanozyme in nano-MnO₂-mediated ABTS reaction processes (P < 0.01), which mainly due to the strong adsorption of metal ion toward nano-MnO₂ surface via the electrostatic attractions, thus leading to the passivation and inactivation of MnO₂ nanozyme catalytic activity. Thereinto, Fe²⁺ reacted with multivalent manganese by oxidation-reduction, while Pb²⁺ was specifically adsorbed onto the surface of MnO₂ nanozyme and formed complexes. Notably, only Fe²⁺ ion inhibited the activity of MnO₂ nanozyme-TMB with a detection limit as low as 1.0 μmol·L^?1. In MnO₂ nanozyme-ABTS sensing systems, Fe²⁺ and Pb²⁺ ions detection limit of 0.5 and 2.0 μmol·L^?1 were, respectively, achieved with a linear response range of 0–0.02 and 0–0.8 mmol·L^?1, implying the developed MnO₂ nanozyme-ABTS sensor was potentially applicable for the visual determination of Fe²⁺ and Pb²⁺ ions in water. In the real water samples, MnO₂ nanozyme-ABTS achieved high accuracy (relative errors: 3.4?10.5%) and recovery (96?110%) for respective detection of Fe²⁺ and Pb²⁺ ions. The simple and rapid MnO₂ nanozyme-ABTS sensing systems might provide a practical assay for visual detection of Fe²⁺ and Pb²⁺ ions in the environmental water samples.     

A new lawsone azo-dye for optical sensing of Fe3+ and Cu2+ and their DFT study

A new lawsone-based azo-dye 2-hydroxy-3-((pyridin-2-ylmethyl)diazenyl)naphthalene-1,4-dione (1) was synthesized and applied for sensing of metal ions. Receptor 1 showed selective fluorescent and colorimetric response for the detection of Cu²⁺ and Fe³⁺ over other tested metal ions. The fluorescence intensity of 1 was significantly quenched allowing detection of Fe³⁺ and Cu²⁺ down to 0.61 and 6.06 μM, respectively. The binding has been established by fluorescence spectroscopic method. Receptor 1 provided a 1?:?1 binding scaffold for recognition of Fe³⁺ and Cu²⁺ ions with the association constant of 3.33 × 10⁶ and 3.33 × 10⁵ M^?1, respectively. The B3LYP/6-31G/LANL2DZ method was employed for the optimization of 1 and 1·Fe³⁺ and 1·Cu²⁺.     

Photoactive chemosensors 4: a Cu protein cavity mimicking fluorescent chemosensor for selective Cu recognition

Fluorescent chemosensor 3 can sense Cu²⁺ ions (1-8 μM) even in the presence of elevated levels of Ni²⁺, Cd²⁺, Zn²⁺, Hg²⁺, Ag⁺ and Pb²⁺ (5000 μM). 3 can also analyze for Ag⁺ ions (50-500 μM) in the presence of Ni²⁺, Cd²⁺, Zn²⁺, Hg²⁺ and Pb²⁺ (5000 μM) but Cu²⁺ strongly interferes.     

Novel naphthalene-based fluorescent chemosensors for Cu2+ and Fe3+ in aqueous media

Three novel compounds bearing 2,7-dihydroxylnaphthalene capable of detecting Cu²⁺ or Fe³⁺ have been synthesised based on photoinduced electron transfer. The ability of these compounds for complex transition metal ions has been studied, and complex stoichiometry for Cu²⁺ and Fe³⁺ complex has been determined in the Tris–HCl (0.01 M DMSO/H₂O (v/v) 1:1, buffer, pH 7.4) solution system by fluorescence titration experiments. These chemosensors form a 1:1 complex with Cu²⁺ or Fe³⁺ and show a fluorescent quenching with a binding constant of (4.46 ± 0.29) × 10³ and (8.04 ± 0.26) × 10⁴, respectively.     

Solid-phase extraction of Pb2+ ion from environmental samples onto L-AC-Ag-NP by flame atomic absorption spectrometry (FAAS)

The development of a solid-phase extraction (SPE) procedure for the pre-concentration of trace amounts of Pb²⁺ ion on 2-furan-2-yl-1-furan-2-ylmethyl-1H-benzoimidazole loaded on activated carbon modified with silver nanoparticles (L-AC-Ag-NP) was presented. The metal ion retained on the sorbent was quantitatively determined via complexation with the ligand. The complexed metal ion was efficiently eluted using 10 mL of 4 mol L^?1 sulphuric acid in 10 w/v% acetone. The influences of the analytical parameters, including pH, amounts of the ligand and the solid phase, eluent conditions and sample volume, on the recoveries of the metal ion were optimised. Using the optimised parameters, the linear response of the SPE method for Pb²⁺ ion were in the ranges of 0.2–160 µg L^?1, and the detection limit for Pb²⁺ ion was 0.034 µg L^?1. The proposed method exhibits a pre-concentration factor (PF) of 80 and an enhancement factor of 30 for Pb²⁺ ion. The presented results demonstrate the successful application of the proposed method for the determination of Pb²⁺ ion in some real samples with high recoveries (>93%) and reasonable relative standard deviation (RSD < 2%).     

Ratiometric and turn-on monitoring for heavy and transition metal ions in aqueous solution with a fluorescent peptide sensor

A novel fluorescent peptide sensor containing tryptophan (donor) and dansyl fluorophore (acceptor) was synthesized for monitoring heavy and transition metal (HTM) ions on the basis of metal ion binding motif (Cys-X-X-X-Cys). The peptide probe successfully exhibited a turn on and ratiometric response for several heavy metal ions such as Hg²⁺, Cd²⁺, Pb²⁺, Zn²⁺, and Ag⁺ in aqueous solution. The enhancements of emission intensity were achieved in the presence of the HTM ions by fluorescent resonance energy transfer (FRET) and chelation enhanced fluorescence (CHEF) effects. The detection limits of the sensor for Cd²⁺, Pb²⁺, Zn²⁺, and Ag⁺ were lower than the EPA's drinking water maximum contaminant levels (MCL). We described the fluorescent enhancement, binding affinity, and detection limit of the peptide probe for HTM ions.     

Syntheses,structures of N‐(substituted)‐2‐aza‐[3]‐ferrocenophanes and their application as redox sensor for Cu2+ ion

Rigid N‐(substituted)‐2‐aza‐[3]‐ferrocenophanes L1 and L2 were easily synthesized from 1,1 ‐dicarboxyaldehydeferrocene and the corresponding amines. Ligands L1 and L2 were characterized by ¹H NMR, ¹³C NMR and single‐crystal X‐ray crystallography. The coordination abilities of L1 and L2 with metal ions such as Cu²⁺, Mg²⁺, Ni²⁺, Zn²⁺, Pb²⁺ and Cd²⁺ were evaluated by cyclic voltammetry. The electrochemical shift (ΔE_1/2) of 125 mV was observed in the presence of Cu²⁺ ion, while no significant shift of the Fc/Fc + couple was observed when Mg²⁺, Ni²⁺, Zn²⁺, Pb²⁺, Cd²⁺ metal ions were added to the solution of L1 in the mixture of MeOH and H₂O. Moreover, the extent of the anodic shift of redox potentials was approximately equal to that induced by Cu²⁺ alone when a mixture of Cu²⁺, Mg²⁺, Ni²⁺, Zn²⁺, Pb²⁺ and Cd²⁺ was added to a solution of L1. Ligand L1 was proved to selectively sense Cu²⁺ in the presence of large, excessive first‐row transition and late‐transition metal cations. The coordination model was proposed from the results of controlled experiments and quantum calculations. Copyright © 2012 John Wiley & Sons, Ltd.     

Synthesis of core–shell magnetic ion-imprinted polymer nanospheres for selective solid-phase extraction of Pb2+ from biological,food, and wastewater samples

Magnetic ion-imprinted polymer nanospheres, which have core–shell structures, have been synthesized as an adsorbent for extraction of Pb²⁺ from real samples prior to its flame atomic absorption spectrometric determination. The prepared adsorbent has been characterized using XRD, VSM, TEM, and FTIR measurements. The optimization results revealed that the adsorbent exhibited high selectivity toward Pb²⁺ over other cations such as Cu²⁺ and Zn²⁺. In addition, the removal efficiency of synthesized adsorbent was considerable (q_m?=?171.42?mg g^?1), its calibration curve was linear (0.5?850.0?ng mL^?1), and detection limit was 0.01?ng mL^?1. These results suggested that the prepared nanoadsorbent is an ideal candidate for solid-phase extraction of Pb²⁺ ions.     

A chemosensor showing discriminating fluorescent response for highly selective and nanomolar detection of Cu and Zn and its application in molecular logic gate

A fluorescent based receptor (4Z)-4-(4-diethylamino)-2-hydroxybenzylidene amino)-1,2dihydro-1,5-dimethyl-2-phenylpyrazol-3-one (receptor 3) was developed for the highly selective and sensitive detection of Cu²⁺ and Zn²⁺ in semi-aqueous system. The fluorescence of receptor 3 was enhanced and quenched, respectively, with the addition of Zn²⁺ and Cu²⁺ ions over other surveyed cations. The receptor formed host-guest complexes in 1:1 stoichiometry with the detection limit of 5 nM and 15 nM for Cu²⁺ and Zn²⁺ ions, respectively. Further, we have effectively utilized the two metal ions (Cu²⁺ and Zn²⁺) as chemical inputs for the manufacture of INHIBIT type logic gate at molecular level using the fluorescence responses of receptor 3 at 450 nm.     

A highly selective visual and fluorescent sensor for Pb2+ and Zn2+ and crystal structure of Cu2+ complex based-on a novel single-armed Salamo-type bisoxime

A novel single-armed Salamo-type bisoximes (H₄L) has been designed and synthesised. An obvious colour change from yellow (H₄L) to pale pink (HL-Pb²⁺) which can be visually observed by the naked eye in visible light. H₄L can act as a fluorescent sensor for ratiometric recognition of Zn²⁺ with high selectivity and sensitivity. Crystallographic data of the [Cu(HL)(μ-OAc)Cu] reveals that the two Cu²⁺ ions are both penta-coordinated with square pyramidal geometries, and forms a 2D supramolecular plane structure by hydrogen bonding interactions.     

Synthesis and applications of (5-substituted benzimidazolo)-benzo-15-crown-5 and 4,4′-bis-benzimidazolo-dibenzo-15-crown-5 for the colorimetric detection of Au3+

In the present work, we have reported the synthesis of benzimidazoles functionalized crown ether derivatives of 4-formyl benzo-15-crown-5/4,4′-diformyl dibenzo-15-crown-5 and substituted diamine pyridine using sulfamic acid as a catalyst in DMSO. These molecules are used for the colorimetric determination of Au³⁺ selectively among other metal cations such as Fe²⁺, Co²⁺, Ni²⁺, Cu²⁺, Zn²⁺, Cd²⁺, Pb²⁺, Hg²⁺, Au³⁺ and Ag⁺ ions_.     

Chemically bonded multiwalled carbon nanotubes as efficient material for solid phase extraction of some metal ions in food samples

Multiwalled carbon nanotubes chemically functionalized with 2-((3-silylpropylimino) methyl) phenol (SPIMP-MWCNT) and successfully applied for the solid phase extraction (SPE) of some metal ions in food samples. The influences of the analytical parameters including pH, amounts of solid phase, eluent conditions (type, volume and concentrations), sample volume and interference of some metal ions on the recoveries of ions Cu²⁺, Pb²⁺, Fe²⁺, Ni²⁺ and Zn²⁺ ion were investigated. The metal ions retained on SPIMP-MWCNT was eluted using 6?mL of 4?mol?L^?1 HNO₃ solution and their content was determined by flame atomic absorption spectrometry (FAAS) with recoveries more than 95% and relative standard deviations (n?=?5) between 2.4–3.4% for both reproducibility and repeatability. The detection limit of this metal ions was between 1.0–2.6?ng?mL^?1 (3S _b , n?=?10) and their preconcentration factor was 100, while their loading capacity was above 32.9?mg?g^?1 of SPIMP-MWCNT. The proposed method was successfully applied for the preconcentration and determination of analytes in different samples.     

Imidazo-benzo-15-crown-5 ethers bearing arylthienyl and bithienyl moieties as novel fluorescent chemosensors for Pd and Cu

Novel fluorescent ionophores bearing imidazo-arylthienyl or imidazo-bithienyl π-conjugated bridges functionalized with one or two fused benzo-15-crown-5 ethers as receptor units are reported. The sensing ability of the compounds in the presence of metallic cations (Li⁺, Na⁺, K⁺, Ca²⁺, Zn²⁺, Cu²⁺, Ni²⁺, Pd²⁺, and Hg²⁺) and fluoride ion was studied in MeCN/DMSO solutions by absorption and emission spectroscopy. The experimental results indicate that all compounds could act as selective fluorimetric sensors for Cu²⁺ and Pd²⁺ and also for the fluoride ion, in the case of the bis-substituted crown ether derivatives.     

Determination trace amounts of thallium after separation and preconcentration onto nanoclay loaded with 1-(2-pyridylazo)-2-naphthol as a new sorbent

A procedure has been proposed for the separation and preconcentration of trace amounts of thallium. It is based on the adsorption of thallium ions onto organo nanoclay loaded with 1-(2-pyridylazo)-2-naphthol (PAN). Thallium ions were quantitatively retained on the column in the pH range of 3.5–6.0, whereas quantitative desorption occurs with 5.0?mL of 5% ascorbic acid and thallium was determined by flame atomic absorption spectrometry. Linearity was maintained between 0.66?ng?mL^?1–15.0?µg?mL^?1?in initial solution. Detection limit was 0.2?ng?mL^?1?in initial solution and preconcentration factor was 150. Eight replicate determinations of 2.0?µg?mL^?1 of thallium in final solution gave a relative standard deviation of ±1.48%. Various parameters have been studied, such as the effect of pH, breakthrough volume and interference of a large number of anions and cations and the proposed method was used to determine thallium ions in water and standard samples. Determination of thallium ions in standard sample showed that the proposed method has good accuracy.