Monitoring of phenylurea and propanil herbicides in river water by solid-phase-extraction high performance liquid chromatography with photoinduced-fluorimetric detection

The separation and determination of five herbicides, including propanil and the phenylureas diuron, isoproturon, linuron and neburon, has been performed by an HPLC method, using photochemically-induced fluorescence detection. The non-fluorescent herbicides were transformed into fluorescent compounds by post-column photochemical reaction. A 60:40 (v/v) acetonitrile-buffer solution of potassium phosphate dibasic (pH 7, 0.01 M) was used for the chromatographic elution to separate propanil, linuron and neburon. The overlapping of isoproturon and diuron peaks, in the selected conditions, was resolved by changing the initial movil phase composition to 50:50 (v/v) methanol-buffer solution of potassium phosphate dibasic (pH 7, 0.01 M). The procedure was applied with satisfactory results to the analysis of these herbicides in Guadiana river water samples (Badajoz, Spain), allowing the detection of herbicide residues in the order of mug l(-1), by using a solid-phase extraction (SPE) pre-concentration step.     

On-line ion-pair solid-phase extraction-liquid chromatography-mass spectrometry for the analysis of quaternary ammonium herbicides

An ion-pair on-line solid-phase extraction procedure using C8 extraction disks, suitable for liquid chromatography-mass spectrometry analysis is developed to determine quaternary ammonium herbicides (quats) in water samples. The separation of these compounds was performed using ion-pair chromatography with heptafluorobutyric acid (15 mM, pH 3.3) and acetonitrile gradient elution. Detection was carried out using a quadrupole mass spectrometer. Water sample volumes up to 50 ml can be preconcentrated with recoveries higher than 70%. Good precision and accuracy (day-to-day and run-to-run) were obtained and the detection limits ranged from 6 to 85 ng l(-1). The proposed on-line ion-pair solid-phase method enables compliance with European Community directives for drinking waters (100 ng l(-1)).     

Electrochemical Detection of Retinoids Using Normal Phase HPLC

Abstract

Non-aqueous electrochemical (EC) detection of 13-cis-retinoic acid, all-trans retinoic, acitretin and vitamin A palmitate in non-aqueous solvents are reported.

Non-aqueous (EC) detection allows for normal-phase chromato-graphy of these compounds prior to detection. The normal phase system used a mobile phase of HEX/THF/AcOH for the separation of all four compounds. The stationary phase was either silica or PVA-sil. The lipophilic salts, t-butylammoniumtetrafluoroborate or t-butyl-ammoniumhexafluorophosphate necessary for EC detection were added post-column.

The limit of detection (LOD) for EC detection of these compounds is approximately 1 ng on column compared with an LOD by UV absorption of 2 ng on column.

The linear detection for these compounds with the EC detector was about two orders of magnitude.     

Chromatography of Uranium on High-Performance Ion Exchangers

Abstract

The potential of high-performance liquid chromatography (HPLC) for the determination of U(VI) in ground waters and urine has been examined under a variety of HPLC experimental conditions. Conventional cross-linked and bonded-phase ion exchangers, both cation and anion, were studied with aqueous mobile phases containing tartrate, citrate, or α-hydroxyisobutyrate. The best chromatography was obtained on bonded-phase cation exchangers with an α-hydroxyisobutyrate eluent. The metal ions were detected either by visible spectrophotometry after a post-column reaction with a complexing reagent, or with a polarographic detector. Dectection after post-column reaction gave the best sensitivity; the detection limit (2 × baseline noise was 6 ng or 60 ng.ml^?1 for 100 μl samples. In-line trace enrichment was used to decrease detection limits and linear calibration curves were observed in the ranges studied; 0.5 to 50 ng.mL^?1 for ground waters and 25 to 400 ng.mL^?1 for artificial urine.     

Trace analysis of sulfonylurea herbicides in water by on-line continuous flow liquid membrane extraction--C18 precolumn liquid chromatography with ultraviolet absorbance detection

An on-line system that consists of continuous-flow liquid membrane extraction (CFLME), C18 precolumn, and liquid chromatography with UV detection was applied to trace analysis of sulfonylurea herbicides in water. During preconcentration by CFLME, five target compounds, including metsulfuron methyl, bensulfuron methyl, tribenuron methyl, sulfometuron methyl, and ethametsulfuron, were enriched in 960 microl of 0.5 mol l(-1) Na2CO3-NaHCO3 (pH 10.8) buffer used as acceptor. This acceptor was on-line neutralized and transported to the C18 precolumn where the analytes were absorbed and focused. Then the focused analytes were injected onto a C18 analytical column for separation and detection at 240 nm. The proposed method was applied to determine sulfonylurea herbicides in water, river, and reservoir water with detection limits of 10-50 ng l(-1) when enriching a 120-ml sample. Throughput is typically one sample per hour.     

Photochemical-fluorimetric method for the determination of total chlorophenoxyacid herbicides

A room temperature photochemically-induced fluorescence (RTPF) method is proposed for the quantitative analysis of seven widely-used chlorophenoxyacid herbicides. The influence of organic solvent, pH (in aqueous solutions), methanol percentage, and UV irradiation time on the excitation and emission wavelengths and fluorescence intensity was investigated. It was found that the largest fluorescence signals were obtained in a mixture of methanol and pH 5 buffer (50/50, v/v), while organic solvents and water produced generally lower signals. The tri- and bichlorinated phenoxyacid herbicides were photolysed significantly more slowly than the monochlorinated derivatives, and the derivatives of 2-propionic acid were photodegraded more quickly than the corresponding derivatives of acetic and butyric acid. Selected UV irradiation times were found to be 15 min for all herbicides under study. Linear calibration graphs were established over about one to two orders of magnitude in the interval 0.1-10 mug ml(-1). The RTPF limits of detection were between 36 ng ml(-1) and 179 ng ml(-1), according to the compound. Analytical application of RTPF to river water samples containing chlorophenoxyacid herbicides is discussed.     

A high performance liquid chromatographic post-column fluorescent ion pair extraction system: application to physostigmine and its metabolite eseroline in human serum

A high performance liquid chromatographic post-column fluorescent ion pair extraction system was developed for the analysis of quaternary ammonium and amine drugs in serum. A new fluorescent ion pair reagent, sodium alpha-(3,4-dimethoxyphenyl) cinnamonitrile-2'-sulfonate (DPS), was synthesized and characterized. The post-column extraction system consisted of a three-dimensional knitted teflon mixing coil and a membrane phase separator which was modified from an original literature design. Physostigmine and its metabolite eseroline were used as model cations. A solid phase extraction procedure using octadecylsilane columns was developed to extract the compounds and neostigmine bromide (internal standard) from human serum. The compounds were chromatographed on a diol column using a 80:20 aqueous phosphate buffer pH 4 absolute methanol mobile phase at a flow rate of 1 mL/min. Methylene chloride was used as the on-line extraction solvent for the DPS ion pairs formed. Fluorescence of the extracted ion pairs was measured using an excitation of 243 nm and an emission cut-off filter at 418 nm. Linearity was in the 2-100 ng/mL and 5-100 ng/mL ranges for physostigmine and eseroline, respectively. Detection limits based on a signal-to-noise ratio of 2, were 2 and 5 ng/mL, respectively. Precision of the method was found to be in the 1.5-3% range and percentage error in the 1.5-7% range for both compounds.     

Speciation and preconcentration of vanadium(V) and vanadium(IV) in water samples by flow injection-inductively coupled plasma optical emission spectrometry and ultrasonic nebulization

An on-line separation, preconcentration and determination system for vanadium(IV) and vanadium(V) comprising inductively coupled plasma optical emission spectrometry (ICP-OES) coupled to a flow injection (FI) method with an ultrasonic nebulization (USN) system was studied. The vanadium species were retained on an Amberlite XAD-7 resin as a vanadium-2-(5-bromo-2-pyridylazo)-5-diethylaminophenol (V-5-Br-PADAP) complex at pH 3.7. Enhanced selectivity was obtained with the combined use of the formation on-line of the complexes and 1,2-cyclohexanediaminetetraacetic acid (CDTA) as masking agent. The vanadium complexes were removed from the microcolumn with 25% v/v nitric acid. A sensitivity enhancement factor of 225 was obtained with respect to ICP-OES using pneumatic nebulization (15-fold for USN and 15-fold for the microcolumn). The detection limit for the preconcentration of 10 mL of aqueous solution was 19 ng L-1. The precision for 10 replicate determinations at the 5 micrograms L-1 V level was 2.3% relative standard deviation (RSD), calculated from the peak heights obtained. The calibration graph using the separation and preconcentration system for vanadium species was linear with a correlation coefficient of 0.9992 at levels from near the detection limits up to at least 100 micrograms L-1. The method was successfully applied to the speciation of vanadium in river water samples.     

Use of on-line liquid chromatography-nuclear magnetic resonance spectroscopy for the rapid investigation of flavonoids from Sorocea bomplandii

A HPLC method, using photochemically-induced fluorescence detection, is described for the separation and determination of four phenylurea herbicides including diuron, isoproturon, linuron and neburon. A post-column photoreactor, consisting of a reactor knitted around a 4 W xenon lamp, has been included between the column and the detector, in order to transform the non-fluorescent herbicides into fluorophors. The influence of mobile phase composition, flow-rate, pH, and buffer concentration has been studied. An acetonitrile–buffer solution of potassium phosphate dibasic of pH 7 and 0.01 M concentration (60:40, v/v), was selected as optimum. For the fluorimetric detection, optimal excitation/emission wavelengths 324/403, 301/433, 335/411 and 326/385 nm were selected for the determination of diuron, isoproturon, linuron and neburon, respectively. The detection limits ranged between 0.07 and 0.46 μg/ml, according to the compound.     

Development and validation of a reversed-phase HPLC method with post-column iodine-azide reaction for the determination of thioguanine

A high-performance liquid chromatographic method of reversed-phase with a post-column iodineazide reaction has been developed and validated for the determination of thioguanine. Isocratic elution was performed on a column of C₁₈ using acetonitrile- water-sodium azide solution (1.5%; pH 6.5) 16: 34: 50 (v/v/v) as a mobile phase with flow-rate of 0.5 mL/min. Monitoring of unreacted iodine in post-column iodine-azide reaction induced by thioguanine resulted in its detection at 350 nm. The method applied to thioguanine was linear within the scope of values 8–100 nM (r ² > 0.9988). The relative standard deviation (RSD < 4.2%) and the recovery (>96%) prove that the intra-day precision and the accuracy were satisfactory. The lower limits of detection (LLD) and quantification (LLQ) of thioguanine were established at the levels of 6 and 8 nM, respectively. The elaborated method was validated and applied to thioguanine determination in tablets.     

Separation of Selected Transition Metal Ions and Divalent Metal Ions by HPLC Using UV-VIS Detection

Abstract

The use of ethylenediaminetetraacetic acid, disodium salt, (pH 3-5) has been investigated as an eluant for the separation and detection of nanogram levels of selected divalent and trivalent metal ions. The effect of pH and eluant concentration upon the retention times and resolution of the system are given and the ability to alter the eluant characteristics to optimize the chromatographic results in different situations will be discussed. The method is less complicated than the method frequently used for transition metal ion determinations which uses a post-column derivitization reagent. This method is applicable to a wider range of metal ions and provides detection limits which are generally within two orders of magnitude of the post-column derivitization method.     

Automated,continuous, and dynamic speciation of urinary arsenic in the bladder of living organisms using microdialysis sampling coupled on-line with high performance liquid chromatography and hydride generation atomic absorption spectrometry

An on-line and fully automated method was developed for the continuous and dynamic in vivo monitoring of four arsenic species [arsenite (AsIII), arsenate (AsV), monomethylarsonic acid (MMA) and dimethylarsinic acid (DMA)] in urine of living organisms. In this method a microdialysis sampling technique was employed to couple on-line with high performance liquid chromatography (HPLC) and hydride generation atomic absorption spectrometry (HGAAS). Dialysates perfused through implanted microdialysis probes were collected with a sample loop of an on-line injector for direct and automated injection into HPLC system hyphenated with HGAAS. The saline (0.9% NaCl) solution was perfused at the rate of 1 microl min(-1) through the microdialysis probe and the dialysate was loaded into 50 microl of sample loop. The separation conditions were optimally selected to be in phosphate buffer solution at a pH 5.2 with a flow rate of 1.2 ml min(-1). The effluent from the HPLC was first mixed on-line at the exit of the column with HCl (1 M) solution and then mixed with a NaBH4 (0.2% m/v) solution. Based on the optimal conditions obtained, linear ranges of 2.5-50 ng ml(-1) for AsIII and 6.75-100 ng ml(-1) for the other three arsenic species were obtained. Detection limits of 1.00, 2.18, 1.03 and 2.17 ng ml(-1) were obtained for AsIII, DMA, MMA and AsV, respectively. Typical precision values of 3.4% (AsIII), 5.4% (DMA), 3.6% (MMA) and 7.5% (AsV) were obtained, respectively, at a 25 ng ml(-1) level. Recoveries close to 100%, relative to an aqueous standard, were observed for each species. The average in vivo recoveries of AsIII, DMA, MMA and AsV in rat bladder urine were 56+/-5%, 60+/-9%, 49+/-3% and 55+/-7%, respectively. The use of an on-line microdialysis-HPLC-HGAAS system permitted the determination of four urinary arsenic species in the bladder of an anesthetized rat with a temporal resolution of 50 min sampling.     

Rapid and Simple Method to Determine Tamoxifen and Its Major Metabolites in Human Liver Microsomes by High Performance Liquid Chromatography with Fluorescence Detection

Abstract

Sensitive and reproducible analyses were developed for assaying tamoxifen, desmethyltamoxifen, didesmethyltamoxifen and hydroxytamoxifen in human liver microsomes by high performance liquid chromatography (H.P.L.C.) following protein precipitation. Detection was by fluorimetry of phenanthrene derivatives formed by on-stream U.V. irradiation with a photochemical reactor enhanced detection (P.H.R.E.D.) for post-column irradiation of the H.P.L.C. stream. The method is highly sensitive (1 ng/ml). A C8,5 μm column (4.6 x 150 mm) was used, with a mobile phase of acetonitrile / 100 mM ammonium acetate (1:1) pH 5. Precipitation of the microsomal protein was carried out by adding methanol and concentrated chloric acid to the reaction mixture, and extraction efficiencies were approximately 100 % for tamoxifen and its metabolites. The assay has been optimised for the identification and quantitation of the 4-hydroxylated metabolite, as well as the two metabolites formed by N-oxidative demethylation of the side chain. The latter catalytic activity involves cytochrome P450 3A enzymes.     

Automated Method for the Selective Determination of Gold by On-Line Solvent Extraction and Reversed Micellar-Mediated Luminol Chemiluminescence Detection

A new method based on the direct coupling of on-line solvent extraction with chemiluminescence (CL) of luminol in reverse micelles is proposed for the determination of gold(III) in a reverse-flow injection system. In the on-line process, gold(III) is extracted from aqueous hydrochloric acid solution with tri-n-octylphosphine oxide in chloroform, followed by separation through a microporous Teflon membrane. A reversed micellar system of cetyltrimethylammonium chloride-water (buffered with sodium carbonate)-6:5 (v/v) chloroform-cyclohexane was used as a medium for the CL reaction. Linear calibration for gold was established over the concentration range 10-5000 ng ml⁻¹ and the detection limit was 1 ng ml⁻¹. Much higher tolerable levels of potential interfering metal ions were achieved for the present on-line procedure. The present method was applied to the analysis of industrial samples of silver-based alloy.     

HPLC Post-Column Ion-Pair Extraction of Acidic Drugs Using a Substituted α-Phenylcinnamonitrile Quaternary Ammonium Salt as a New Fluorescent Ion-Pair Reagent

Abstract

A reversed-phase HPLC post-column ion-pair extraction system was developed for the analysis of carboxylic acid drugs and their salts using α-(3,4-dimethoxyphenyl)-4′ -trimethylammonium-methylcinnamonitrile methosulfate (DTM) as a new fluorescent ion-pair reagent. The on-line post-column extraction system was optimized with respect to the reagent concentration, extraction coil length and internal diameter, ionic strength of mobile phase, extraction solvent, and the membrane phase separator. Sodium salicylate, ketoprofen, ibuprofen, probenecid, and valproic acid were used as model compounds to evaluate the ion-pair extraction system. The method was applied to pharmaceutical dosage forms containing ketoprofen and valproic acid. Other acidic compounds evaluated using the ion-pair reagent showed that lipophilic acids produced more extractable ion-pairs and higher sensitivities than hydrophilic acids.     

On-line preconcentration system for bismuth determination in urine by flow injection hydride generation inductively coupled plasma atomic emission spectrometry

An on-line bismuth preconcentration and determination system implemented with hydride generation inductively coupled plasma atomic emission spectrometry (HG-ICP-AES) associated to flow injection (FI) was studied. Quinolin-8-ol and Amberlite XAD-7 were used for the retention of bismuth, at pH 4.5. The bismuth complex was removed from the micro-column with nitric acid. The detection limit value for the preconcentration of 100 ml of aqueous solution was 0.02 ng ml(-1) with a relative standard deviation (R.S.D.) of 3.5%, calculated from the peak heights obtained. The calibration graph using the preconcentration system for bismuth was linear with a correlation coefficient of 0.999 at levels near the detection limits up to at least 100 ng ml(-1). The method was successfully applied to the determination of bismuth in human urine samples.     

Determination of phenyltin compounds by reversed-phase liquid chromatography

An analytical procedure for the determination of phenyltin compounds in environmental sample waters was studied. Chromatography of mono-, di- tri-phenyltin (MPT, DPT and TPT) was performed on a reversed-phase C₁₈ column with the mobile phase comprising methanol/10⁻² M H₃PO₄ (80:20 v/v) at pH 3 and UV detection at 214 nm. To enhance the sensitivity of the detection system, the post-column reaction between morin or 3-hydroxyflavone and phenyltin compounds was formed before fluorescence detection. Several parameters affecting the fluorescence intensity were studied systematically, including the optimum condition for the post-column reagent that was also compatible with the eluent. The parameters concerned in this study were the pH, the percentage of Triton X-100, the ratio of fluorigenic reagent to phenyltin compounds and the amount of methanol in the eluent. Detection limits before the preconcentration process were in the region of 1.5 ppb for TPT and 150–250 ppb for MPT and DPT, respectively. Utilizing solid-phase extraction on a C₁₈ cartridge for sample clean-up as well as preconcentration successfully reduced the detection limit of TPT to the level of ng dm⁻³ and can be applied to seawater analysis. Recovery in the range 95.0–98.0% was obtained by developing the optimum elution profile in the preconcentration step. © 1998 John Wiley & Sons, Ltd.     

Development of a selective post-column detector for phenols separated by high-performance liquid chromatography

An on-line post-column reactor based on air-segmented continuous flow is described for the determination of phenols. The reaction used is the coupling of diazotized sulfanilic acid with phenols to form highly colored azo dyes. The effect of experimental parameters on the detector response was inveestigated by both univariate and simplex approaches in order to establish optimum reaction conditions. The aqueous reaction system is compatible with common reverse-phase solvents. The detection limit for phneol with the derivatization detector (71 μg 1^?1 shows a 16-fold improvement over u.v. detection of the underivatized phenol. Imprecision, based on multiple injections of sample into the HPLC system and measurement of the peak heights, is ± 0.64% (RSD). The technique is applied to the determination of phenols added to river water and present in residual fuel oil samples.     

Automated pre-column derivatization of amines in biological samples with dansyl chloride and with or without post-column chemiluminescence formation by using TCPO-H2O2.

On-line automation of two different liquid chromatographic procedures, a pre-column derivatization system and a pre- and post-column system, in order to generate chemiluminescence is reported. Dansyl chloride (Dns-Cl) was used as a pre-column reagent to form fluorophores and bis(2,4,6-trichlorophenyl) oxalate (TCPO) and hydrogen peroxide (H2O2) as a post-column reagent to generate chemiluminescence. This procedure is based on the employment of a primary column packed with C18 material inserted in a multi-dimensional assembly for sample clean-up and derivatization with Dns-Cl. The dansyl derivatives formed are transferred and separated in a LiChrospher 100 RP18 analytical column (125 x 4 mm id, 5 microns film thickness) using acetonitrile-imidazole buffer (pH 6.8) (70 + 30) as eluent. The separated derivatives were transferred to the detector for fluorescence detection or to the post-column system where the chemiluminescence response was generated by using TCPO-H2O2 and the products were detected by chemiluminescence. The procedure was optimised for amphetamine and related compounds. A comparison between the on-line pre-column and pre- and post-column systems was performed. The results show that the sensitivity of chemiluminescence detection can be higher than that of fluorescence detection. The recoveries obtained ranged from 98 +/- 8 up to 108 +/- 8% for amphetamine and methamphetamine, respectively. The accuracy and precision of these methods were evaluated.     

Vortex-assisted surfactant-enhanced-emulsification liquid-liquid microextraction for the determination of triazine herbicides in water samples by microemulsion electrokinetic chromatography

A novel method based on the combination of microemulsion electrokinetic chromatography (MEEKC) and vortex‐assisted surfactant‐enhanced‐emulsification liquid–liquid microextraction (VSLLME) was developed for the determination of five triazine herbicides (simazine, atrazine, ametryn, prometryn, and terbutryn) in water samples. The five triazine herbicides were baseline separated by using the microemulsion buffer containing a 10 mmol/L borate buffer at pH 9.5, 2.5% (w/v) SDS as surfactant, 0.8% (w/v) ethyl acetate as oil phase, and 6.0% (w/v) 1‐butanol as cosurfactant. The optimum extraction conditions of VSLLME were as follows: 100 μL chloroform was used as extraction solvent, 5.0 × 10^?5 mol/L Tween‐20 was chosen as the surfactant to enhance the emulsification, and the extraction process was carried out by vortex mixing for 3 min. Under these optimum experimental conditions, the calibration curve was linear in the range of 2.0–200.0 ng/mL, with the correlation coefficients (r²) varying from 0.9927 to 0.9958. The detection limits of the method varied from 0.41 to 0.62 ng/mL. The purposed method was applied to the determination of five triazine herbicides in real water samples, and the recoveries were between 80.6 and 107.3%.