新催化动力学光度法测定微量铁的研究--棓花青-O2指示反应体系

在 p H 7.0的磷酸盐缓冲体系中 ,微量铁 ( )能显著催化溶解氧氧化木立口 花青褪色。研究了该指示反应的催化动力学行为 ,建立了测定微量铁的新催化动力学分析法 ,方法线性测定范围 0 .0 5～ 0 .6μg· m L- 1 ,检出限为 0 .0 1 μg· m L- 1 。本法选择性和重现性好 ,反应体系简单易于控制。用其测定了自来水、人发及面粉等样品中的铁 ,结果满意。     

甲基橙指示动力学光度法测定微量苯酚

基于在酸性条件下,苯酚对溴酸钾氧化甲基橙的反应具有显著的抑制作用,建立了测定微量苯酚的动力学光度分析新方法。线性范围为0.40μg.mL-1~2.8μg.mL-1,检出限为0.1777μg.mL-1,对1.0μg.mL-1的苯酚平行测定11次的相对标准偏差是1.44%,对空白溶液连续11次测定的相对标准偏差是3.32%。     

动力学光度法测定食品中痕量甲醛

基于酸性介质中甲醛抑制KBrO3氧化碱性品红的褪色反应,建立了阻抑动力学光度法测定痕量甲醛的新方法.利用固定时间法优化了试剂浓度、反应时间和反应温度.在所选择的实验条件下,方法的线性范围为0.08～1.0 mg·L-1,检出限为0.015 mg·L-1.该方法用于水发食品中甲醛含量的测定,并进行了加标回收试验,回收率在93%～105%之间.     

Determination of Herbicide Difenzoquat Methyl Sulfate in Citruses and Baby Juices by Kinetic‐Spectrophotometric Method and HPLC Method

The purpose of this paper is to present a new kinetic‐spectrophotometric method which involve inexpensive equipment and which can be applied by all analyst who have to determine difenzoquate methyl sulfate (DFQ) residues in citruses and baby juices. The method is based on the inhibited effect of DFQ on the oxidation of sulfanile acid (SA) by hydrogen peroxide in phosphate buffer in presence Cu(II) ion. The reaction was monitored spectrophotometrically by measuring the increase in absorbance of the reaction product at 370 nm. The proposed inhibited method permits determination of DFQ over the range 0.36 to 1.80 μg/mL and 1.80 to 7.20 μg/mL, with quantification limit of 0.184 μg/mL. The relative standard deviations are 0.73‐2.90% for the concentration interval of DFQ 1.80‐0.36 μg/mL. The method was successfully applied to determination of DFQ residues in citruses and baby juices. The HPLC method is used to verify the results. The results obtained for the same samples by the two methods are quite comparable.     

A Novel Spectrophotometric Method for the Determination of Zolmitriptan in Pharmaceutical Formulations

A simple, rapid, cost effective and extraction‐free spectrophotometric method has been developed for the determination of zolmitriptan in pharmaceutical raw and dosage forms. The method is based on the charge‐transfer reaction of zolmitriptan in acetonitrile medium with 0.2% 2,3‐dichloro‐5,6‐dicyano‐1,4‐benzoquinone to form a colored product peaking at 555 nm. Beer's law is obeyed in the concentration range 10‐250 μg mL^?1 with molar absorptivity of 1.7 × 10³ L mole^?1 cm^?1. The effects of variables such as reagent concentration, time of reaction, color stability and interferences have been investigated to optimize the procedure. The results have been validated analytically and statistically. The proposed method has been successfully applied for the determination of zolmitriptan in pharmaceutical formulations. Results indicate that the method is accurate, precise and reproducible (relative standard deviation < 2%).     

Kinetic and Spectrophotometric Determination of Thioctic Acid in Bulk and Pharmaceutical Formulations

Three simple and sensitive spectrophotometric methods were developed for the determination of thioctic acid in bulk and in its pharmaceutical preparations using iron(III) as an oxidizing agent. Method A is based on kinetic investigation of oxidation reaction of the drug with iron(III) and a subsequent chelation of the produced iron(II) with ferricyanide to form prussian blue colored product at room temperature for a fixed time of 15 minutes at 750 nm. Methods B and C are based on oxidation of the studied drug with iron(III). The equivalent iron(II) produced is allowed to react with either o‐phenanthroline or bipyridyl to give colored species measurable at 510, 522 nm, respectively. Regression analysis of Beer‐Lambert plots showed a good correlation in the concentration ranges of 0.4–4 μg/mL with a detection limit of 0.095 μg/mL for method A and 0.5–5 μg/mL with detection limits 0.137 and 0.127 for method B and C, respectively. The three methods were successfully applied for the determination of the drug in its dosage forms. The percentage recoveries were 99.88 ± 1.40, 99.98 ± 1.26 and 100.64 ± 1.07, respectively.     

Development and Validation of Kinetic Spectrophotometric Method for the Determination of Losartan Potassium in Pure and Commercial Tablets

A validated kinetic spectrophotometric method has been developed for the determination of losartan potassium in pure and dosage forms. The method is based on oxidation of the losartan potassium with alkaline potassium permanganate at room temperature (25 ± 1 °C). The reaction is followed spectrophotometrically by measuring the increase in absorbance with time at 603 nm, and the initial rate, fixed time (at 12.0 min) and equilibrium time (at 90.0 min) methods are adopted for constructing the calibration graphs. All the calibration graphs are linear in the concentration range of 7.5–60.0 μg mL^?1 and the calibration data resulted in the linear regression equations of n? = ?6.422 × 10^?7 + 1.173 × 10^?5 C, A =3.30 × 10^?4 + 5.28 × 10^?3 C and A = ?2.09 × 10^?2 + 1.05 × 10^?1 C for initial‐rate, fixed time and equilibrium time methods, respectively. The limits of detection for initial rate, fixed time and equilibrium time methods are 0.71, 0.21 and 0.19 μg mL^?1, respectively. The activation parameters such as E_a, ΔH^?, ΔS^?, and ΔG^? are also determined for the reaction and found to be 87.34 KJ mol^?1, 84.86 KJ mol^?1, 50.96 JK^?1 mol^?1 and ?15.10 KJ mol^?1, respectively. The variables are optimized and the proposed methods are validated as per ICH guidelines. The method has been applied successfully to the estimation of losartan potassium in commercial tablets. The performance of the proposed methods was judged by calculating paired t‐ and F‐ values. The analytical results of the proposed methods when compared with those of the reference method show no significant difference in accuracy and precision and have acceptable bias.     

Determination of Sulfide in Spring and Wastewater by a New Kinetic Spectrophotometric Method

A simple, rapid, and sensitive method has been developed for the determination of trace amounts of sulfide based on its reaction with thionine. The reaction is monitored spectrophotometrically by measuring the decreasing absorbance of the dyestuff at 600 nm by the fixed time method. After optimization of the measuring conditions the calibration curves were found linear up to 38.0 ppm (four regions), and the theoretical limit of detection was 0.076 ppm and the relative standard deviation for determination of 1.0 ppm sulfide (n = 10) was found to be 2.7%. The proposed method was applied successfully to the determination of sulfide in spring water and wastewater samples.     

A New Spectrophotometric Method for the Determination of Maneb in Commercial Formulations

Abstract

A new rapid, selective and sensitive method has been developed for the determination of maneb using pyrocatechol-violet(PV) as chelating reagent in the pH range of 7.5–11.0 in the presence of CTAB producing a complex which shows maximum absorption at 640 nm. Working range of the method is 0.2–3.0 μg ml^?1 maneb (manganese ethylenebisdithiocarbamate). The molar absorptivity of the color system is 79600 1 mol^?1 cm^?1 and Sandell's sensitivity is 0.0033 μg cm^?2. The reproducibility of the method has been checked by the 10 replicate analysis of 15 μg of maneb in 10 ml of solution. The method is quite sensitive and has been applied for the determination of maneb in various commercial samples, crops, grains and synthetic samples.     

Spectrophotometric Determination of Risedronate and Etidronate in Pharmaceutical Formulations via the Molybdovanadate Method

Abstract

An accurate and sensitive spectrophotometric method was developed for the determination of risedronate and etidronate in pharmaceuticals. The method was based on oxidation of the studied drugs with potassium persulfate and reaction of the generated orthophosphate ions with molybdovanadate reagent. The produced yellow phosphovanadomolybdate complex was measured at 313 nm. The method was rectilinear in the ranges 0.5–10 and 0.5–8 µg/mL with detection limits of 0.087 and 0.122 µg/mL for risedronate and etidronate, respectively. The method was applied for the determination of the studied drugs in their tablets, and the results agreed with those obtained by the comparison methods.     

一种高灵敏测定水中游离氯的新方法

探讨了在中性水溶液中，游离氯催化过氧化氢氧化副攻瑰苯胺的褪色反应及其动力学条件，建立了一种高灵敏、选择性好测定水中痕量Ｃｌ２的新方法，测定范围为０．０１５￣１．０μｇ／１０ｍｌ，成功地用于水中Ｃｌ２的测定。     

Spectrophotometric Determination of Nitrite in Aqueous Solution by the Diazotization-Coupling Method with Orthanilic Acid-Resorcinol

Abstract

A spectrophotometric method for the determination of nitrite is described. It relies upon the reaction of this ion with an acidified orthanilic acid solution to form a diazonium ion, which is subsequently coupled with resorcinol, in alkaline medium, to form immediately a yellow-colored stable water-soluble and intense azo dye having maximum absorption at 426 nm. The linear absorbance plot with concentration indicates that Beer's law is obeyed over the range of 1-12 μg of nitrite in a final volume of 10ml, with a molar absorptivity of 38.7 × 10³1 mol^?1cm^?1, sensitivity index of 0.0012μgcm^?3, relative error of –0.5 to +0.2% and relative standard deviation of 0.43-3.5%, depending on the concentration level. The optimum conditions affecting and related to the color reaction and interference due to foreign ions have been studied.     

On the Dissociation of Methyl Orange: Spectrophotometric Investigation in Aqueous Solutions from 10 to 90 ∘C and Theoretical Evidence for Intramolecular Dihydrogen Bonding

The dissociation of methyl orange was investigated by spectrophotometry in aqueous solutions from 10 to 90 ^∘C and by quantum chemical calculations. Combined chemometric and thermodynamic analyses of the spectrophotometric data were used to simultaneously extract the thermodynamic stabilities and the spectrophotometric attributes of the dominant methyl orange species in solutions containing less than 20.00 mmol-kg⁻¹ perchloric acid and submillimolal concentrations of methyl orange. The analyses revealed the presence of only one monomeric deprotonated and one monomeric protonated species. The spectra did not reveal any evidence for the presence of tautomeric equilibria between the protonated azo and ammonium species in the experimental range studied. Thermodynamic analyses of the temperature-dependent dissociation constants showed the reactions to be endothermic and enthalpy driven with increasing acidity and increasing temperature. All molar absorption coefficients in the 275–375 nm range can be adequately reproduced in the 10–90 ^∘C range with a set of Gauss–Lorentz parameters and used to predict the absorption spectra for any desired condition. The dominant features of the spectrophotometric attributes of the methyl orange species could also be retrieved in Time Dependent–Density Functional Theory (TD–DFT) calculations. Topological analyses of the electron density also revealed the formation of a dihydrogen bond between the azo proton and an adjacent phenyl ring hydridic hydrogen which increases the stability of the azo molecules relative to the ammonium molecule.     

钴—H2O2—水杨基荧光酮反应体系的新催化动力学分析方法研究

在碱性介质中，痕量钴（Ⅱ）能显著催化Ｈ２Ｏ２氧化水杨基荧光酮的指示反应，本文据此建立了测定痕量钴的新催化动力学分析法，方法线性范围为０．１～２．８μｇ／Ｌ，检测限为０．０２μｇ／Ｌ。测得反应表现活化能为５９．０３ｋＪ／ｍｏｌ。测定了人发，茶叶，土壤和水等样品中钴的含量，结果满意。     

对白酒中甲醇含量国标测定方法的改进

按酒卫生标准的标准分析方法,用光度法测定白酒中甲醇含量的标准曲线不甚理想,对草酸硫酸溶液加入量进行了一些改变,所得标准曲线较为理想,灵敏度和精密度都有提高.测定了一些白酒样品中的甲醇含量,结果令人满意.     

Kinetic Determination of Trace Amounts of Cu(II) in Water Based on its Catalytic Effect on the Reaction of Mercaptosuccinic Acid and Cr(VI)

 A kinetic method is presented for the determination of Cu(II) in water. It is based on the catalytic effect of Cu(II) on the oxidation of mercaptosuccinic acid by chromate in acidic media. The extent of the reaction is followed spectrophotometrically at 345 nm and pseudo-first order rate coefficients are determined as a function of catalyst concentration. The optimum operating conditions regarding ionic strength, temperature and concentration of reagents were established. Interference by several ionic species was studied and the effects of Fe(III) and Pb(II) were suppressed by complexation with pyrophosphate. Calibration lines were obtained for both low (30–640 μg · l⁻¹) and high (640–1500 μg · l⁻¹) catalyst concentrations. The relative standard deviation for 625 μg · l⁻¹ Cu(II) is 6.1% (n = 5). The detection limit is 22 μg · l⁻¹. The method was applied to real samples of river water of the mining region of Baia-Mare, Northern Romania. The results were compared to those obtained by an officially standardized AAS method. Good agreement was attained. The method is inexpensive, fairly rapid and sensitive. Moreover, its working range covers the exact range of concentrations usually encountered in the mentioned geographic area. Received July 28, 2000; accepted December 10, 2001; published online June 24, 2002     

Green Spectrophotometric Method for the Quantitative Analysis of Vancomycin in Pharmaceuticals and Comparison with HPLC

Abstract

A spectrophotometric method for the determination of vancomycin base, (VCM), and vancomycin hydrochloride, (HVCM), based on the reaction with copper (II) ions, is presented. The obtained detection limit is about 4.5×10^?5 mol L^?1. The working analytical range falls between 1.0×10^?3 mol L^?1 and 1.0×10^?2 mol L^?1. Recovery studies in presence of excipients were performed. The recovery results were compared with HPLC. For HVCM the proposed method presented similar recovery to that of HPLC, 100.4% vs. 100.2%, but better precision, 1.9% vs. 6.1%. In the VCM case the recovery is quite better, 100.5% vs. 89.6%, with a little smaller precision, 2.1% vs. 1.3%.     

A Rapid Spectrophotometric Method to Resolve Ternary Mixtures of Propyphenazone, Caffeine, and Acetaminophen in Tablets

Summary.  A simple and rapid derivative spectrophotometric assay procedure is described for the analysis of caffeine (1), acetaminophen (2), and propyphenazone (3) in tablet formulations. The concentration range of application is 5.0–25.0 μg·cm⁻³ for 2 and 3 and 1.0–5.0 μg·cm⁻³ for 1. The method involves the extraction of the drugs from tablets with 0.1 N H₂SO₄, filtration, appropriate dilution, and measurement of the fourth derivative absorbance values at zero crossing wavelengths of 230.0, 263.2, and 256.6 nm for 1, 2, and 3. As a reference method, a reversed phase HPLC procedure was developed. Commercially available tablets were analyzed; statistical comparison of the results with those obtained from the reference method showed good agreement. The derivative spectrophotometric method has the advantage of being simple, rapid, inexpensive, and easy to perform. Received April 18, 2001. Accepted (revised) June 5, 2001     

A Simple Graphical Method to Determine the Order in Catalyst

A graphical analysis to elucidate the order in catalyst is presented. This analysis uses a normalized time scale, t [cat]_Tⁿ, to adjust entire reaction profiles constructed with concentration data. The method is fast and simple to perform because it directly uses the concentration data, therefore avoiding the data handling that is usually required to extract rates. Compared to methods that use rates, the normalized time scale analysis requires fewer experiments and minimizes the effects of experimental errors by using information on the entire reaction profile.     

A New Spectrophotometric Method for the Determination of Arsenic in Environmental and Biological Samples

Abstract

A simple and selective spectrophotometric method has been developed for the determination of trace amounts of arsenic using azure B as a chromogenic reagent. The proposed method is based on the reaction of arsenic(III) with potassium iodate in acid medium to liberate iodine. The liberated iodine bleaches the violet color of azure B and is measured at 644 nm. This decrease in absorbance is directly proportional to the As(III) concentration, and Beer's law is obeyed in the range 0.2–10 µg ml^?1 of As(III). The molar absorptivity, Sandell's sensitivity, detection limit, and quantitation limit of the method were found to be 1.12×10⁴ l mol^?1cm^?1, 6.71×10^?3 µg cm^?2, 0.02 µg ml^?1 and 0.08 µg ml^?1, respectively. The optimum reaction conditions and other analytical parameters were evaluated. The proposed method has been successfully applied for the determination of arsenic in various environmental and biological samples.