OH functionalized Multi-Walled Carbon Nanotube modified electrode as electrochemical sensor for the detection of Aceclofenac

ABSTRACT

The rapid electrochemical determination of Aceclofenac (ACF) has been employed by cyclic voltammetry (CV), differential pulse voltammetry (DPV) using developed OH-functionalised multiwalled carbon nanotube carbon paste electrode (OH-MWCNT/CPE). Modified electrode was characterised by scanning electron microscopy (SEM), energy dispersive X-ray spectroscopy (EDAX), X-ray diffraction spectroscopy (XRD), electrochemical impedance spectroscopy (EIS) and cyclic voltammetry (CV). The ACF exhibits two oxidation peaks at +0.4 V, +0.66 V and one reduction peak at +0.3 V. The active surface area of the bare carbon paste electrode (BCPE) and modified electrode have been characterised by using K₃[Fe(CN)₆] solution containing 0.1 M KCl. In DPV mode, variation of ACF gave the limit of detection (LOD = 3s/m) 0.246 μM over the concentration range 1.0 to 190.0 μM (R² = 0.9994). The developed electrode has good stability, reproducibility and could be successfully validated for the detection of ACF in pharmaceutical samples and biological fluids.     

无金属可见光诱导原子转移自由基聚合法制备聚丙烯酰胺@氧化石墨烯/纳米钯复合物修饰电极及其对乙醇的检测

在金电极表面,用无金属可见光诱导原子转移自由基聚合(MVL ATRP)的方法制备聚丙烯酰胺@氧化石墨烯/纳米钯复合物修饰电极(Au/PAM@GO/Pd)。采用电化学循环伏安法(CV)、交流阻抗法(EIS)、扫描电子显微镜(SEM)、能量色散X射线光谱法(EDS)对Au/PAM@GO/Pd电极进行表征,结果表明在金电极表面成功制备了复合物。利用Au/PAM@GO/Pd电极作为电化学传感器,该传感器能成功地检测溶液中的乙醇。在最佳条件下,利用差分脉冲伏安法(DPV)该传感器检测乙醇的线性范围为1.0×10-8~1.0 mol/L,检出限(S/N=3)为1.3×10-9 mol/L,线性相关系数为0.996。     

基于Pt/Au双金属修饰针灸针的非酶葡萄糖传感器

通过在不锈钢针灸针（AN）表面依次电沉积金（Au）纳米颗粒和铂（Pt）纳米颗粒,基于它们在AN表面的协同作用,实现了一种用于非酶葡萄糖检测的电化学生物传感器。首先,通过扫描电子显微镜对其功能界面（Pt/Au/AN）进行表征,结果显示类似卷心菜的纳米材料均匀致密地分布在AN表面。然后,通过循环伏安法和电化学阻抗法对Pt/Au/AN电极的电化学特性进行了研究。结果表明,与Au/AN或Pt/AN电极相比,Pt/Au/AN电极对葡萄糖氧化表现出优越的电催化活性。这表明双金属Pt/Au的接触界面是葡萄糖氧化的重要电催化位点。在pH7.4的模拟生理介质中,制得传感器的线性范围为0.1~35 mmol·L^-1,检测限为0.0763 mmol·L^-1,对葡萄糖的检测表现出较高的灵敏度和良好的抗干扰性能、稳定性。此外,该传感器已成功用于人体血清葡萄糖的检测。     

Electrochemical application of titanium dioxide nanoparticle/gold nanoparticle/multiwalled carbon nanotube nanocomposites for nonenzymatic detection of ascorbic acid

Titanium dioxide nanoparticle/gold nanoparticle/carbon nanotube (TiO₂/Au/CNT) nanocomposites were synthesized, and then characterized using scanning electron microscopy (SEM), transmission electron microscopy (TEM), and energy dispersive X-ray spectroscopy (EDX). A TiO₂/Au/CNT nanocomposite-modified glassy carbon (GC) electrode was prepared using the drop coating method and was investigated using electrochemical impedance spectroscopy (EIS), cyclic voltammetry (CV), differential pulse voltammetry (DPV), and amperometric current–time response (I-T). The modified material is redox-active. The nonenzymatically detected amount of ascorbic acid (AA) on the TiO₂/Au/CNT electrode showed a linear relationship with the AA concentration, for concentrations from 0.01 to 0.08 μM; the sensitivity was 117,776.36 μA?·?cm^?2?·?(mM)^?1, and the detection limit was 0.01 μM (S/N?=?3). The results indicated that the TiO₂/Au/CNT nanocomposite-modified GC electrode exhibited high electrocatalytic activity toward AA. This paper describes materials consisting of a network of TiO₂, Au, and MWCNTs, and the investigation of their synergistic effects in the detection of AA.     

Fabrication of Superoxide Dismutase (SOD) Imprinted Poly(ionic liquid)s via eATRP and its Application in Electrochemical Sensor

Superoxide dismutase (SOD) plays an important role in nearly all living cells. In this study, SOD imprinted poly(ionic liquid)s (SIPILs) were prepared on the surface of the bare Au electrode modified with nano‐palladium and nano‐gold (Au/nPd/nAu/SIPILs). SIPILs was synthesized with 1‐vinyl‐3‐propyl imidazole sulfonate ionic liquids as functional monomers via electrochemically mediated atom transfer radical polymerization (eATRP) catalyzed by SOD. The Au/nPd/nAu/SIPILs was examined by cyclic voltammetry (CV), scanning electron microscope (SEM), energy‐dispersive spectrometer (EDS) and X‐ray photoelectron spectroscopy (XPS). The Au/nPd/nAu/SIPILs was also used as an electrochemical sensor to determine SOD by differential pulse voltammetry (DPV). Under the optimal conditions, the detection range of SOD was from 1.0×10^?8 to 1.0×10² mg L^?1 with a limit of detection of 8.90×10^?9 mg L^?1 (S/N=3). Compared with other methods, the sensor based on SIPILs had the broader linear range and lower detection limit.     

Highly sensitive electrochemical determination of Sunset Yellow based on gold nanoparticles/graphene electrode

An electrochemical sensor was prepared using Au nanoparticles and reduced graphene successfully decorated on the glassy carbon electrode (Au/RGO/GCE) through an electrochemical method which was applied to detect Sunset Yellow (SY). The as-prepared electrode was characterized by scanning electron microscopy (SEM), transmission electron microscopy (TEM), atomic force microscopy (AFM) and electrochemical measurements. The results of cyclic voltammetry (CV) proved that Au/RGO/GCE had the highest catalytic activity for the oxidation of SY as compared with GCE, Au/GCE, and RGO/GCE. Differential pulse voltammetry (DPV) showed that the linear calibration curves for SY on Au/RGO/GCE in the range of 0.002 μM–109.14 μM, and the detection limit was estimated to be 2 nM (S/N = 3). These results suggested that the obtained Au/RGO/GCE was applied to detect SY with high sensitivity, low detection limit and good stability, which provided a promising future for the development of portable sensor in food additives.     

Development of a Sensor Based on Poly(1,2-diaminoanthraquinone) for Individual and Simultaneous Determination of Mercury (II) and Bismuth (III)

Contamination of natural water by mercury (Hg²⁺) and bismuth (Bi³⁺) metal ions have been extensively studied due to their toxic effects. A validated square-wave anodic stripping voltammetry (SW-ASV) method for determining Bi³⁺ and Hg²⁺ ions individually and simultaneously is described. A new electrochemical sensor was constructed using a gold (Au) electrode that has been modified with poly(1,2-diaminoanthraquinone) (p-1,2-DAAQ). Scanning electron microscopy, cyclic voltammetry, and electrochemical impedance spectroscopy were used to characterize the p-1,2-DAAQ/Au modified electrode. Factors such as the polymer film thickness, electrolyte, square wave parameters and preconcentration conditions were optimized to improve the performance of the modified Au electrode. Good linear responses were achieved in the concentration ranges of 1–200 μg L⁻¹ and 1–50 μg L⁻¹ forBi³⁺ and Hg²⁺, respectively, and the limits of detection were 0.27 μg L⁻¹ (Bi³⁺) and 0.29 μg L⁻¹ (Hg²⁺). The interference study results illustrated the high selectivity of the modified electrode for detection of Bi³⁺ and Hg²⁺. The proposed SW-ASV method was successfully applied for Bi³⁺ and Hg²⁺analyses in different real water samples.     

Amino‐Containing Ultrafine Organosilica‐Nanoparticle‐Modified Au Electrode for the Determination of Cu(II) Ions

Using 3‐Aminopropyltriethoxysilane(APTES) as a single silica source, an amino‐rich ultrafine organosilica‐nanoparticle‐modified Au electrode was fabricated, following the formation of (3‐mercaptopropyl)‐trimethoxysilane (MPTS) monolayer on Au surface (MPTS/Au). With cetyltrimethylammonium bromide as an additive, APTES‐based gel particles on the electrode have a narrow particle size distribution of 4–7 nm and “crystal‐like” structure. AFM and electrochemical characterization confirmed the successful grafting of APTES nanoparticles on MPTS/Au. The APTES/MPTS/Au electrode is highly sensitive for the detection of copper(II) ions with a detection limit as low as 1.6×10^?12 mol L^?1 (S/N>3) by square wave voltammetry. The current is linear to copper(II) concentration between 1.6×10^?12 and 6.25×10^?10 mol L^?1.     

Fabrication of New Magnetic Nanoparticles (Fe3O4) Grafted Multiwall Carbon Nanotubes and Heterocyclic Compound Modified Electrode for Electrochemical Sensor

Magnetic Fe₃O₄ nanoparticles functionalized multiwalled carbon nanotubes (nano‐Fe₃O₄ MWNTs) were prepared for electrochemical sensors. 2‐amino‐5‐mercapto‐1,3,4‐thiadiazole was used as a connecter to form a network that connected nano‐Fe₃O₄ MWNTs to the Au electrode surface. Modified process of the electrode was studied with SEM, TEM and cyclic voltammetry. Cyclic voltammetry and amperometric i‐t curve were used to investigate characteristics of the obtained electrode. The sensor has been successfully used on the direct detection of catechol and showed excellent performances. The linear regression equation was I_pa(μA)=0.07763+0.16739 C (μmol/L); R=0.9993 and the detection limit was 5.38×10^?8 mol/L. The modified electrode showed good reproducibility and stability.     

Label-Free Detection of DNA Hybridization Based on MnO2 Nanoparticles

Abstract

Nano-MnO₂/chitosan composite film modified glassy carbon electrode (MnO₂/CHIT/GCE) was fabricated and a DNA probe was immobilized on the electrode surface. The immobilization and hybridization events of DNA were characterized by cyclic voltammetry (CV) and electrochemical impedance spectroscopy (EIS). The EIS was applied to the label-free detection of the target DNA. The human immunodeficiency virus (HIV) gene fragment was successfully detected by this DNA electrochemical sensor. The dynamic detection range was from 2.0 × 10^?11 to 2.0 × 10^?6 mol/L, with a detection limit of 1.0 × 10^?12 mol/L.     

A quadruplet electrochemical platform for ultrasensitive and simultaneous detection of ascorbic acid,dopamine, uric acid and acetaminophen based on a ferrocene derivative functional Au NPs/carbon dots nanocomposite and graphene

In this work, a new nanomaterial of thiol functional ferrocene derivative (Fc-SH) stabilized Au NPs/carbon dots nanocomposite (Au/C NC) coupling with graphene modified glassy carbon electrode (Fc-S-Au/C NC/graphene/GCE) was fabricated to serve as a quadruplet detection platform for ultrasensitive and simultaneous determination of ascorbic acid (AA), dopamine (DA), uric acid (UA) and acetaminophen (AC). The Au/C NC was synthesized by adding HAuCl₄ into carbon nanodots solution without using any additional reductant and stabilizing agent. Then the Fc-SH was utilized as the protective and capping agent to modify the Au/C NC. Transmission electron microscopy (TEM), UV–Vis, Fourier-transform infrared (FT-IR), scanning electron microscopy (SEM), cyclic voltammetry (CV), electrochemical impedance spectroscopy (EIS) were adopted to characterize the morphology and electrochemical properties of the materials and the electrodes. The Fc-S-Au/C NC/graphene/GCE exhibits a synergistic catalytic and amplification effects towards oxidation of AA, DA, UA and AC owing to the existence of the nanomaterial and electron mediator. When simultaneous detection of AA, DA, UA and AC, the oxidation peak potentials of the four compounds on the electrode can be well separated and the peak currents were linearly dependent on their concentrations. The quadruplet detection platform shows excellent linear range and ultrasensitive response to the four components, the detection limits were estimated to be as low as 1.00, 0.05, 0.12 and 0.10 μM (S/N = 3), and the modified electrode exhibits excellent stability and reproducibility. The proposed electrode has been successfully applied to detect of these four analytes in real samples with satisfactory results.     

Sensitive determination of dopamine in the presence of uric acid and ascorbic acid using TiO2 nanotubes modified with Pd, Pt and Au nanoparticles

A simple modified TiO(2) nanotubes electrode was fabricated by electrodeposition of Pd, Pt and Au nanoparticles. The TiO(2) nanotubes electrode was prepared using the anodizing method, followed by modifying Pd nanoparticles onto the tubes surface, offering a uniform conductive surface for electrodeposition of Pt and Au. The performance of the modified electrode was characterized by cyclic voltammetry and differential pulse voltammetry methods. The Au/Pt/Pd/TiO(2) NTs modified electrode represented a high sensitivity towards individual detection of dopamine as well as simultaneous detection of dopamine and uric acid using 0.1 M phosphate buffer solution (pH 7.00) as the base solution. In both case, electro-oxidation peak currents of dopamine were linearly related to accumulated concentration over a wide concentration range of 5.0 × 10(-8) to 3.0 × 10(-5) M. However in the same range of dopamine concentration, the sensitivity had a significant loss at Pt/Pd/TiO(2) NTs electrode, suggesting the necessity for Au nanoparticles in modified electrode. The limit of the detection was determined as 3 × 10(-8) M for dopamine at signal-to-noise ratio equal to 3. Furthermore, the Au/Pt/Pd/TiO(2) NTs modified electrode was able to distinguish the oxidation response of dopamine, uric acid and ascorbic acid in mixture solution of different acidity. It was shown that the modified electrode possessed a very good reproducibility and long-term stability. The method was also successfully applied for determination of DA in human urine samples with satisfactory results.     

Sensitively Electrochemical Sensing for Sequence‐Specific Detection of Phosphinothricin Acetyltransferase Gene: Layer‐by‐Layer Films of Poly‐L‐Lysine and Au‐Carbon Nanotube Hybrid

An electrochemical DNA sensing film was constructed based on the multilayers comprising of poly‐L ‐lysine (pLys) and Au‐carbon nanotube (Au‐CNT) hybrid. A precursor film of mercaptopropionic acid (MPA) was firstly self‐assembled on the Au electrode surface. pLys and Au‐CNT hybrid layer‐by‐layer assembly films were fabricated by alternately immersing the MPA‐modified electrode into the pLys solution and Au‐CNT hybrid solution. Cyclic voltammetry was used to monitor the consecutive growth of the multilayer films by utilizing [Fe(CN)₆]^3?/4? and [Co(phen)₃]^3+/2+ as the redox indicators. The outer layer of the multilayer film was the positively charged pLys, on which the DNA probe was easily linked due to the strong electrostatic affinity. The hybridization detection of DNA was accomplished by using methylene blue (MB) as the indicator, which possesses different affinities to dsDNA and ssDNA. Differential pulse voltammetry was employed to record the signal response of MB and determine the amount of the target DNA sequence. The established biosensor has high sensitivity, a relatively wide linear range from 1.0×10^?10 mol/L to 1.0×10^?6 mol/L and the ability to discriminate the fully complementary target DNA from single or double base‐mismatched DNA. The sequence‐specific DNA related to phosphinothricin acetyltransferase gene from the transgenically modified plants was successfully detected.     

Enhanced Electrocatalytic Oxidation of Paracetamol at DNA Modified Gold Electrode

Cysteine monolayer has been assembled onto bare gold electrode (SAM/Au), and subsequently deoxyribonucleic acid (DNA) has been successfully immobilized at the SAM/Au electrode. The thus modified electrode is assigned DNA/SAM/Au. Modification steps of the electrode were followed electrochemically using K₄[Fe(CN₆)] electrochemical marker. Also, the build‐up of the modified electrode composition is followed using EDX and the crystallographic orientation is inspected using XRD. The electrochemical behavior of paracetamol (PC) at DNA/SAM/Au electrode is investigated. Interestingly, the sluggish irreversible behavior of PC at the bare gold electrode is converted to a quasi‐reversible one at DNA/SAM/Au electrode pointing to some interaction between the immobilized DNA and PC. The enhanced electrochemical behavior of PC at modified DNA/SAM/Au electrode is successfully used for a sensitive electrochemical determination of PC. Square wave voltammetry (SWV) was used for this purpose. The concentration of PC was in linear relation with the peak current at the optimum conditions within the range 10.0–110.0 μg mL^?1 with correlation coefficient (R²) of 0.998. Also, the standard deviation (SD) and relative standard deviation (RSD) were calculated and found to be 0.817 and 1.52, respectively, indicating the significance of the present method.     

Amperometric L‐cysteine Sensor Using a Gold Electrode Modified with Thiolated Catechol

A thiolated catechol (CA) consisting of 1,6‐Hexanedithiol (HDT) and CA was modified on a gold (Au) electrode to obtain an amperometric L‐cysteine sensor with detection limit of 60.6 nM. The preparation of thiolated CA was conducted via a thiol addition between HDT and electro‐oxidized CA (EOCA). Briefly, the thiol addition reaction was accomplished by potential cycling of HDT/Au electrode in 0.1 M phosphate buffer (PB, pH 7.2) containing CA, and an EOCA‐HDT/Au electrode was produced. The obtained EOCA‐HDT/Au electrode exhibits a pair of well‐defined redox peaks (at 0.22/0.10 V) of o‐quinone moiety, which effectively mediates the oxidation of L‐cysteine in a 0.1 M PB (pH 7.2), with an over‐potential decrease by ca. 0.12 V (versus bare Au electrode). Electrochemical quartz crystal microbalance, cyclic voltammetry and surface‐enhanced Raman spectra were used to study relevant processes and/or film properties. The amperometric L‐cysteine sensor has good anti‐interferent ability and reproducibility. It also has acceptable recovery for detection of L‐cysteine in urine samples.     

Enhanced Electrochemical Detection of DNA Hybridization Based on Au/MWCNTs Nanocomposites

Abstract

The nanocomposites of gold nanoparticles and multi‐walled carbon nanotubes (MWCNTs) have been applied in the enhanced electrochemical detection of DNA hybridization. Gold nanoparticles coated on MWCNTs uniformly were synthesized by simply one step reaction. Target DNA was detected by the peak current difference of differential pulse voltammetry (DPV) signals of the electroactive indicator methylene blue (MB) before and after hybridization on the Au/MWCNTs modified glass carbon electrode (GCE). Due to the excellent electrical conductivity of the novel matrix, the biosensor revealed high sensitivity with the detection level down to 1.0 pM. Excellently selectivity and reproducibility were also discussed.     

Electrochemical aptamer sensor for highly sensitive detection of mercury ion with Au/Pt@carbon nanofiber‐modified electrode

In this paper, an electrochemical aptamer sensor was proposed for the highly sensitive detection of mercury ion (Hg²⁺). Carbon nanofiber (CNF) was prepared by electrospinning and high‐temperature carbonization, which was used for the loading of platinum nanoparticles (PtNPs) by the hydrothermal method. The Pt@CNF nanocomposite was modified on the surface of carbon ionic liquid electrode (CILE) to obtain Pt@CNF/CILE, which was further decorated by gold nanoparticles (AuNPs) through electrodeposition to get Au/Pt@CNF/CILE. Self‐assembling of the thiol‐based aptamer was further realized by the formation of Au‐S bond to get an electrochemical aptamer sensor (Aptamer/Au/Pt@CNF/CILE). Due to the specific binding of aptamer probe to Hg²⁺ with the formation of T‐Hg²⁺‐T structure, a highly sensitive quantitative detection of Hg²⁺ could be achieved by recording the changes of current signal after reacting with Hg²⁺ within the concentration range from 1.0 × 10^?15 mol/L to 1.0 × 10^?6 mol/L and the detection limit of 3.33 × 10^?16 mol/L (3σ). Real water samples were successfully analyzed by this method.     

Improvements in the electrochemical generation of arsine at gold electrodes as a sample introduction strategy for arsenic determination in well-water samples by atomic absorption spectrometry

The development and evaluation of a cathode consisting of a gold electrode covered by a polyaniline film, PANI/Au modified electrode, for electrochemical generation of arsine is described. The efficiency of arsine production using the new electrode was ascertained by comparison with corresponding hydride generation atomic absorption spectroscopy determinations of arsenic (As) in aqueous standards. The PANI/Au modified electrodes provide better sensitivity, accuracy and precision than the pure Au cathodes. The PANI/Au cathodes were prepared by controlled electrodeposition cycles of polyaniline films on top of Au electrodes. Cathodes obtained after 10 electrodeposition cycles showed the best performance, while the ones obtained after five voltammetry cycles produced films too thin and those obtained after 20 voltammetry cycles produced films too thick for the purpose of this work. Under optimised conditions, the As limit of detection in aqueous solutions, according to the (3σ) criterion, was 2.48 µg L^?1. For accuracy determination, the modified electrode was applied to quantification of As(III) in acidified aqueous solutions of the certified standard reference material, NIST SRM 1643d, and in well-water samples containing possible interfering ions. Application of the Student’s t-test showed no significant difference between the expected and obtained results of the NIST SRM standard analysis at the 95% confidence level. Values for six replicate determinations of As(III) in the well-water samples showed close agreement with values obtained by analyses using hydride generation atomic absorption. Recoveries were in the range of 95–105% at test for acceptable accuracy in the analysis of real samples.     

An Electrochemical Sensing Platform for the Detection of Lead Ions Based on Dicarboxyl‐Calix[4]arene

A simple and highly sensitive electrochemical sensor COOH−C4 derived from dicarboxyl‐calix[4]arene modified on a screen printed gold electrode (Au) was developed for the determination of lead ions in water samples. A 3‐mercaptopropionic acid (MPA) monolayer was used as a template on the gold electrode for the surface modification with dicarboxyl‐calixarene. The modified electrodes were surface‐characterized using Fourier Transform infrared spectroscopy (FTIR). The data obtained proved the confirmation of each stage of the electrode modification. The electrochemical analyses of the COOH−C4 electrode showed an enhanced electrocatalytic activity and higher current towards Pb²⁺ ions as compared to the bare Au and MPA/Au electrodes. Under optimum conditions, the differential pulse voltammetry response of COOH−C4 displayed a wide linear response ranging from 280–2500 μg/L for Pb²⁺ with a detection limit of 6.2 μg/L. In addition, the fabricated electrode showed a high selectivity and stability towards the Pb²⁺ ions in presence of possible interfering species. The present method was successfully applied to determine Pb²⁺ ions in real samples with satisfactory precision, with a relative standard deviation of 3.12 % and an acceptable recovery of 92 %, which demonstrated the potential application of dicarboxyl‐calix[4]arene modified on electrodes for heavy‐metal sensing.     

三维纳米枝状物表面制备蛋白质印迹聚合物及其性能

在金电极表面制备了3D金/铜纳米枝状物,并以丙烯酰胺为功能单体,N,N-亚甲基双丙烯酰胺为交联剂,血红蛋白为模板分子,在枝状物表面成功制备了蛋白质印迹聚合物。利用循环伏安法和扫描电子显微镜对制备的聚合物修饰电极进行了表征,通过微分脉冲伏安法、利用制备的聚合物修饰电极可对溶液中的血红蛋白进行检测,得到比已报道的类似印迹传感器更宽的检测范围和更低的检测下限,其线性范围为1.0×10~(-14)~1.0×10~(-1)mg/L,检测限为1.9×10~(-15)mg/L(S/N=3),相关系数为0.9975。实验结果表明,在电极表面制备的金/铜纳米枝状物,大大提高了电极的电子传递能力,也提高了印迹聚合物修饰电极的检测范围。