GC–MS法同时测定聚氨酯塑胶跑道中16种多环芳烃

建立气相色谱–质谱法同时测定聚氨酯塑胶跑道中16种多环芳烃如萘、苊、二氢苊、芴、菲、蒽、荧蒽、苯并[b]荧蒽、芘、苯并[a]蒽、屈、苯并[k]荧蒽、苯并[a]芘、茚并[1,2,3-cd]芘、1-甲基奈、2-甲基萘的检测方法。样品采用甲苯为提取剂,经超声提取和硅胶柱净化后,用气相色谱–质谱法测定16种多环芳烃残留量。16种多环芳烃的质量浓度在0.2~10.0 mg/kg范围内与色谱峰面积呈良好的线性,线性相关系数r20.998,检出限为5.0~60.0μg/kg。回收率为72.4%~101.6%,测定结果的相对标准偏差为0.9%~7.2%(n=6)。该方法准确度高、精密度好,适用于聚氨酯塑胶跑道中多环芳烃多残留检测。     

气相色谱-质谱联用法同时测定纺织品中的8种多环芳烃

建立了同时快速测定纺织品中8种多环芳烃的气相色谱-质谱联用(GC-MS)方法。样品经正己烷-丙酮(1∶1)超声波提取,氮吹浓缩后采用DB-17MS色谱柱程序升温分离,选择离子模式采集,外标法定量。研究了纺织品中8种多环芳烃的提取方法,并对色谱和质谱条件进行了优化。实验结果表明,多环芳烃的浓度在0.05~1.00 mg/L或0.10~1.00 mg/L范围内与峰面积呈良好的线性关系,相关系数(r2)均大于0.995,方法检出限(LOD)为0.02~0.05 mg/kg,方法定量下限(LOQ)为0.05~0.10 mg/kg。在3个加标水平下的回收率为81.2%~106.4%,相对标准偏差(RSD)为2.5%~8.5%。该方法灵敏度高,操作简便,定量准确,适用于纺织品中8种多环芳烃的分析测定。     

Determination of Polycyclic Aromatic Hydrocarbons in Vegetables by Headspace SPME-GC

Inverse gas chromatography (IGC) at infinite dilution is a powerful technique to characterize the superficial and interfacial properties of solid substrates as oxides, polymers or polymers adsorbed on oxides. It can also be used to determine the physicochemical properties and the transition phenomena of polymers. In this paper, IGC was used to determine the changes, as a function of temperature, of the specific free enthalpy ??G _a ^SP and deduce the specific entropy ??S _a ^SP of poly (methyl methacrylate) (PMMA) adsorbed on alumina or on silica for different tacticities of PMMA. The study of the surface properties of PMMA/SiO₂ and PMMA/Al₂O₃, revealed an important difference in the physicochemical behaviour of oxides covered by various concentrations of PMMA. This study also highlighted an important effect of the tacticity of the polymer on the specific entropy of PMMA adsorbed on oxides.     

气相色谱-质谱法测定塑料制品中多环芳烃

将正己烷-二氯甲烷(2+1)混合溶剂加入于塑料样品中,在水浴中于室温下超声萃取30 min,所得溶液在控温30℃的水浴中用旋转蒸发浓缩至2 mL,并将此溶液通过硅胶柱净化分离.先用正己烷淋洗硅胶柱以洗去非极性的正构烷烃,然后以正己烷-二氯甲烷(3+2)混合溶剂淋洗,所得洗脱液先经旋转蒸发浓缩至2 mL,再用氮气吹拂浓缩至恰为1.0 mL,此溶液供气相色谱-质谱分析之用,对相应的分析条件也作了详述.由于采用了先旋转蒸发后氮气吹拂的浓缩方法,不仅使蒸发时间缩短,而且减少了低沸点多环芳烃(PAH)的挥发损失.按所提出的方法测定了塑料中16种PAH,方法的检出限(3S/N)小于0.01 mg·kg-1.选用一种含PAH甚少的塑料样品作为基体,加入3个浓度水平含16种PAH的混合标准溶液按方法操作进行回收试验,测得回收率在87.2%～100.2%之间,测定值的相对标准偏差(n=7)在1.3%～5.8%之间.     

溴代稠环芳烃的氧化溴化法合成

以HBr/H2O2为溴化体系,采用氧化溴化法合成了6种稠环芳烃的溴化物。 合成反应无需催化剂,通过控制反应温度和溴化试剂用量,可以在稠环芳烃化合物的活性位选择性地单溴化或双溴化,产率可达51.1%～94.2%。 产品经熔点和1H NMR法确认,合成操作简单安全,环境污染少,有工业应用前景。     

气相色谱-质谱法测定塑料玩具中多环芳烃

提出了气相色谱-质谱法测定塑料玩具中16种多环芳烃(PAH′s)含量的方法。样品经正己烷超声提取30min后,40℃水浴氮气吹干。用水、甲醇和正己烷-二氯甲烷(3+2)混合溶剂各5mL溶解残渣,过C18固相萃取柱净化,用正己烷-二氯甲烷(3+2)混合溶液洗脱,所得洗脱液过HP-5MS色谱柱分离,电子轰击离子源检测。16种多环芳烃的质量浓度在0.2～4.0mg·L-1范围内与其峰面积呈线性关系,方法的检出限(3S/N)在0.002～0.021mg·kg-1之间。以聚丙乙烯、聚乙烯、聚氯乙烯或丙烯腈-丁二烯-苯乙烯共聚物等4种材质的塑料玩具为基体,进行加标回收试验,回收率在79.6%～95.2%之间。     

气相色谱-质谱法测定三七提取物中16种多环芳烃

提出了气相色谱-质谱法测定三七提取物中16种多环芳烃。样品用环己烷萃取,经凝胶渗透色谱净化处理后,采用HP-5MS色谱柱分离,电子轰击离子源-选择离子检测模式检测,外标法定量。16种多环芳烃的质量浓度在0.01~1.0mg·L-1范围内与其峰面积呈线性关系,方法的测定下限(10S/N)在0.3~9.5μg·kg-1之间。在0.01,0.05,0.1mg·kg-1添加水平下,16种多环芳烃的加标回收率在70.1%~111%之间,相对标准偏差(n=6)在3.0%~9.4%之间。     

Supercritical Fluid Extraction of Bivalve Samples for Simultaneous GC-MS Determination of Polychlorobiphenyls and Polycyclic Aromatic Hydrocarbons

Abstract

A method is presented for the simultaneous determination of polychlorobiphenyls and polycyclic aromatic hydrocarbons in bivalve samples. The method implies the fortification of the freeze-dried sample with isotopically labeled internal standards; followed by extraction with supercritical carbon dioxide modified with 3% methanol, then a simple clean-up step on a silicagel packed Pasteur pipette and, finally, determination by gaschomatography-mass spectrometry. The method requires little time and labor compared to traditional methods, uses negligible amounts of solvents and produces little wastes. Sixty different PCB congeners and seven selected PAHs are analyzed. Six replicate analyses were performed on the SRM 2974 certified material and the results are discussed.     

Determination of Atmospheric Polycyclic Aromatic Hydrocarbons Using Accelerated Solvent Extraction

Abstract

An accelerated solvent extraction (ASE) method has been developed for the determination of polycyclic aromatic hydrocarbons (PAHs) present in both atmospheric particulate and gaseous phases in this study. Extraction parameters such as the combination of solvents, extraction temperature, and static extraction time were investigated and optimized. Effective extraction was achieved using a 3:1 mixture of n-hexane and acetone as extraction solvents at 100°C in 30 min for all the compounds studied. The optimized extraction method was compared with conventional extraction methods and validated using National Institute of Standards and Technology (NIST)–certified standard reference material (SRM) 1649a. The recoveries obtained for certified 12 PAHs were in the range of 82–126% with relative standard deviation (RSD) between 6 and 28%. The validated ASE technique was used followed by gas chromatography–mass spectrometry (GC-MS) for the determination of PAHs distributed between gaseous and particulate phases in the atmosphere of Singapore. Total average concentrations of PAHs in air samples were 33.54 ± 19.32 ng m^?3, with 4.72 ± 2.80 ng m^?3 in particulate phase and 28.82 ± 16.92 ng m^?3 in gaseous phase, respectively. The results obtained from this study are compared to those reported from other areas of the world.     

固相萃取-液相色谱-串联质谱法同时测定尿液中9种多环芳烃代谢物

建立了固相萃取-液相色谱-串联质谱同时测定尿中2-羟基萘、1-羟基萘、2-羟基芴、3-羟基菲、1-羟基芘等9种多环芳烃代谢物的液相色谱-串联质谱测定方法。尿样中结合态的多环芳烃代谢物在β-葡萄糖苷酸酶-芳基硫酸酯酶缓冲液(pH 5.0)作用下,于37℃水浴中避光水解4 h后,以C18固相萃取小柱富集、净化,以甲醇洗脱,采用Waters Symmetry C18色谱柱,流动相为乙腈-0.2%氨水(72∶27,V/V)等度淋洗分离后进入质谱测定。在喷雾电压4 kV,毛细管温度300℃下,以3-羟基菲13C为内标,采用SRM模式负离子扫描方式测定,内标法定量。9种多环芳烃代谢物在尿中的线性范围为0.90～100μg/L;相关系数为0.9970～0.9990;回收率为79.0%～119.8%;相对标准偏差为4.3%～12.4%;检出限为0.04～0.90μg/L;结果表明,本方法可用于尿中9种多环芳烃代谢物的测定。     

Determination of Polycyclic Aromatic Hydrocarbons in Airborne Particulate by High Performance Liquid Chromatography

This paper presents a trisolvent ultrasonic extraction and HPLC analysis method for the determination of 11 polycyclic aromatic hydrocarbons in air particulate collected on an air filter by a commercial high volume air sampler. A reverse phase column, Vydac 201 TP, and a gradient mobile phase, acetonitrile/water, were used. The 11 PAHs, fluoranthene, pyrene, benz[a]anthracene, chrysene, benzo[b]fluoranthene, benzo[k]fluoranthene, benzo[a]pyrene, dibenz[a, h]anthracene, benzo[ghi]perylene, indeno[1,2,3-cd]pyrene, and coronene were completely resolved under experimental conditions. All the PAHs except coronene were monitored by fluorescence with λ_ex=270 nm, λ_em>389 nm. Coronene was monitored by UV with λ=300 nm. The methodology was evaluated by spiking SRM 1649 with a PAH standard and then going through different extraction procedures and analyzing the PAH concentrations without clean-up. An external standard method was used for quantitation. The recovery yields for fluoranthene, benz[a]anthracene, benzo[a]pyrene, benzo[ghi]perylene and indeno[l,2,3-cd]pyrene were above 90%. The detection limits of PAH with fluorescence at λ_ex=270 nm, λ_em>389 nm ranged from 5.7 pg to 69.5 pg.     

荧光分光光度法测定海藻中的石油烃

用索氏提取法，ＮａＯＨ－消解法和超声振荡萃取法提取海藻样品中的石油烃成分，荧光分光光度计测定石油烃含量，结果表明，ＮａＯＨ－消解能够更有效从样品中提取石油烃，其检测限为０．０７５ｍｇ／ｋｇ。     

Simultaneous Dispersive Liquid–Liquid Microextraction and Determination of Different Polycyclic Aromatic Hydrocarbons in Surface Water

Polycyclic aromatic hydrocarbons (PAHs) are a class of persistent organic pollutants of water, and their determination at trace levels in the aquatic ecosystems is essential. In this work, an ultrasound-assisted dispersive liquid–liquid microextraction (DLLME) procedure was suggested utilizing a binary dispersive agent for recovery of different molecular weight polycyclic aromatic hydrocarbons (PAHs) from waters. The detection was carried out by gas chromatography–mass spectrometry (GC-MS) as well as high-performance liquid chromatography with fluorescence and diode-array detection (HPLC-FD/PDA). The method was optimized for the extraction of analytes with respect to the mixture composition, ratios of components, ultrasonication time and centrifugation parameters. The analytical schemes for PAHs extraction from water samples using different ratios of extraction and dispersive solvents are reported. The mixture consisting of chloroform and methanol was applied for the extraction of PAHs containing two or three fused aromatic rings; the mixture of chloroform and acetonitrile is suitable for PAHs containing more than four aromatic rings. The mixture of chloroform:acetone + acetonitrile was applied in the universal scheme and allowed for the simultaneous extraction of 20 PAHs with different structures. The developed sample preparation schemes were combined with GC-MS and HPLC-FD/PDA, which allowed us to determine the analytes at low concentrations (from 0.0002 µg/L) with the recoveries exceeding 80% and relative standard deviations of about 8%. The developed methods for the determination of 20 PAHs were applied to the analysis of water samples from the Karasun Lake (Krasnodar), Azov Sea (Temryuk) and Black Sea (Sochi).     

超声萃取-高效液相色谱法测定沉积物中多环芳烃

提出了高效液相色谱法测定沉积物中多环芳烃(PAH′s)含量的方法。样品中多环芳烃用正己烷-丙酮(1+1)混合溶液超声提取,离心分离后,所得萃取液经蒸发浓缩,然后过装有1g无水硫酸钠和2g硅胶的层析柱净化。以Varian PAHs色谱柱为分离柱,不同比例配成的甲醇和水为流动相梯度洗脱,用荧光检测器检测。方法的检出限(3S/N)在0.34～1.52ng.g-1之间。方法用于沉积物中多环芳烃的测定,测定结果的相对标准偏差(n=5)在3.2%～10.6%之间。用标准加入法测定方法的回收率,结果在57.1%～103.4%之间     

在线固相萃取-高效液相色谱法同时测定人尿液中7种多环芳烃代谢物

采用双三元液相色谱系统结合荧光检测器,建立了在线固相萃取-液相色谱法同时测定人尿液中7种多环芳烃代谢物的方法。目标化合物首先在Turboflow Cyclone固相萃取柱上在线富集浓缩,然后通过六通阀转移至Hypersil Green PAH色谱柱,以乙腈-水为流动相进行梯度洗脱分离,流速1.0 mL/min,柱温30℃,荧光检测器检测,分离周期为20 min。在优化的色谱条件下,5~2000 ng/L或50~20000 ng/L范围内,7种多环芳烃代谢物均呈良好的线性关系(r≥0.999),方法检出限为0.5~15 ng/L,加标回收率为80.7％~110.7％。应用本方法对吸烟和非吸烟人群尿液中7种多环芳烃代谢物的含量进行了测定,吸烟者尿液中的2-羟基萘、1-羟基萘、2-羟基菲、2-羟基芴、4-羟基菲、6-羟基显著高于非吸烟者。     

同步荧光—高效液相色谱联用法分析多环芳烃同分异构体

本文以高效液相色谱作为预分离手段，采用步荧光法对两组环芳烃异构体；屈和苯并（ａ）蒽，苯并（ｋ）荧蒽和北进行了分析研究，结果表明，选择适当的Δλ，可以使色谱法难以分离的两组异构体达到同时测定，该方法具有简单，快速，灵敏等优点，本文此方法应用于海洋沉积物样品的研究，也取得了很的效果。     

恒能量同步荧光法测定焦化厂气溶胶中多环芳烃

建立了超声提取-恒能量同步荧光法测定焦化厂气溶胶中多环芳烃(PAHs)的新方法。该法简便快速,无需对混合物进行分离,就可实现7种组分的同时鉴别和定量测定。方法的检出限在0.02~2.30ng·mL-1之间,相关系数r0.9991,相对标准偏差为1.06%~1.52%。应用该方法分析某焦化厂多环芳烃取得了良好的效果,回收率为80.0%~125.2%。     

固相萃取-高效液相色谱法测定环境水样中多环芳烃

1　引　　言多环芳烃是一类重要的致癌物质 ,故对环境样品中痕量的多环芳烃分析具有重要意义。高效液相色谱 荧光检测器检测是测定多环芳烃最常用的方法。由于传统方法样品处理需用溶剂萃取 ,操作麻烦 ,污染大 ,引入误差因素多 ,故我们研究了用固相萃取预分离和富集 ,高效液相色谱程序波长荧光检测器检测的方法 ,并用二极管矩阵检测器 (ＰＤＡ)辅助作峰识别和纯度分辨。该方法采用固相萃取小柱富集 ,具有富集倍数高 ,节省时间 ,环境污染小 ,不易乳化的优点 ,采用程序波长荧光检测器检测的同时又用ＰＤＡ检测器作了辅助峰识别和纯度分辨 ,利…