On-line spectrophotometric determination of scandium after preconcentration on XAD-4 resin impregnated with nalidixic acid

An on-line scandium preconcentration and determination method was developed with spectrophotometer associated with flow injection. Scandium from aqueous sample solution of pH 4.5 was selectively retained in the minicolumn containing XAD-4 resin impregnated with nalidixic acid at a flow rate of 11.8 mL min^?1 as scandium–nalidixic acid complex. The scandium complex was desorbed from the resin by 0.1 mol L^?1 HCl at a flow rate of 3.2 mL min^?1 and mixed with arsenazo-III solution (0.05 % solution in 0.1 mol L^?1 HCl, 3.2 mL min^?1) and taken to the flow through cell of spectrophotometer where its absorbance was measured at 640 nm. The preconcentration factors obtained were 35 and 155; detection limits of 1.4 and 0.32 μg L^?1 and sample throughputs of 40 and 11 were obtained for preconcentration time of 60 and 300 s, respectively. The tolerance limits of many interfering cations like Th(IV), U (VI), rare-earths and anions like tartrate, citrate, oxalate and fluoride were improved. The method was successfully applied to the determination of scandium from mock seawater samples and good recovery was obtained. The method was also validated on certified reference material IAEA-SL-1 (lake sediment) and the result was in good agreement with the reported value.     

Spectrophotometric Investigation and Determination of Scandium Using Semi-Xylenol Orange

Abstract

The composition, stability constant and molar absorption coefficient of the chelate of scandium ion with Semi-Xylenol Orange (SXO) are determined speotrophotometrically in a medium of chloroacetate buffer. In the scandium-Semi-Xylenol Orange system, Sc(SXO) chelate is formed with a logarithmic stability constant of 19.66 and molar absorptivity of 2.4x10⁴ (530 nm) 1 mole^?1cm^?1.

The precision and accuracy attainable in a direct photometric microtitration of Sc⁺⁺⁺ ion with a 0.001M solution of EDTA using SXO as a metallochromic indicator has been studied. Interferences of different anions and cations on scandium determination are also investigated.

Spectrophotometric determination of scandium(III) using SXO at the optimum conditions has been carried out. Beer's law is obeyed for 0–13.49 μg scandium/25 ml.     

A highly sensitive spectrophotometric determination of palladium with chromal blue g and cetyltrimethylammonium chloride

A new spectrophotometric method for the determination of palladium with chromal blue G (Color Index 43835) and cetyltrimethylammonium chloride is described. The sensitivity of the color reaction between palladium and chromal blue G is greatly increased in the presence of cetyltrimethylammonium chloride. The palladium complex has maximal absorbance at pH 3.2–3.8 and at 670 nm. Beer's law is obeyed over the range 0.08–1.4 p.p.m. palladium; the molar absorptivity is 1.01 · 10⁵ l mol^-1 cm^-1 at 670 nm and the sensitivity is 1·10^-3 μg Pd cm^-2. The mole ratio of palladium and chromal blue G in the complex in the presence of cetyltrimethylammonium chloride is 1:3. Only scandium interferes when sodium fluoride is used as masking agent.     

Complexation of fluoride anion and its ion pairs with alkali metal cations by tetra-substituted lower rim calix[4]arene tryptophan derivative

Abstract

Selective binding of fluoride anion and its alkali metal cation ion pairs by a fluorescent calix[4]arene (L) derivative bearing tryptophan moieties was studied in acetonitrile at 25 °C. It was found that LF^? and LF₂^2? complexes were formed and their stability constants were determined by means of UV and ¹H NMR titrations. Both amide and indole NH groups were involved in the stabilisation of the fluoride complexes, i.e. L afforded two anion-binding sites. ¹H NMR titrations provided evidence of simultaneous complexation of both Na⁺ cation and fluoride anion resulting in the formation of a ternary NaLF complex. In this ion pair complex, the Na⁺ cation was most probably bound primarily by the calixarene ether and amide oxygen atoms, whereas the indole NH groups interacted with the fluoride ion. A highly favourable ion pairing between Na⁺ and F^– in acetonitrile was studied using potentiometric measurements. The results pointed out the importance of fluoride pairing with alkali metal cations in aprotic organic solvents and the necessity of taking these reactions into account in the course of speciation studies of such solutions.     

Colour reaction of scandium with quercetin and its application to the analysis of scandium

A spectrophotometric study of the scandium-quercetin complex is described; μg amounts of scandium can be determined with quercetin at 43.5 mμ and pH 4.4. A 1:1 complex is formed. The apparent instability constant of the complex was estimated as 2.7·10^-7 by a spectrophotometric method. An ion-exchange method for separating scandium from several interfering ions is described.     

A radiochemical method of separation of carrier-free vanadium from scandium and bulk amount of titanium

A method for the separation of carrier-free vanadium from scandium and bulk amount of titanium has been developed. Vanadium has been produced through the reaction^natTi(d,n)^48,49V with 8 MeV deuterons from the Variable Energy Cyclotron, Calcutta. The separation is performed with Dowex 1×8, 50–100 mesh fluoride from anion exchange resin which retains all the scandium and titanium with 4.5M hydrofluoric acid as eluent, while vanadium(V) is easily eluted. The chemical yield of vanadium was >85%.     

Xylenol Orange,Zirconium(IV) and Fluoride Color Reaction in Mixed Micelles of N-Hexadecylpyridinium Chloride and Brij 35, and Its Analytical Application1

Abstract

The color reaction between Xylenol orange (XO), zirconium (IV) and fluoride ions in the presence of various surfactants alone or in combination was studied at various pH. The XO -zirconium)IV)-fluoride ion ternary complex in mixed micellar media containing a low concentration of N-hexadecylpyridinium chloride (HPC) as a cationic surfactant and large amounts of (poly{oxyethylene)dodecyl ether (Brij 35) as a nonionic surfactant at weakly acidic media was found to be the most stable, and showed a remarkable bathochromic shift and clear contrast against a reagent blank. The maximum absorbance was at 600 nm in the mixed micellar media at pH 3.5, and the apparent molar absorptivities at 600 nm were 7.0 × 10⁴ 1 mol^?1 cm^?1 for zirconium(IV) and 1.4 × 10⁴ 1 mol^?1 cm^?1 for fluoride ion. The calibration curves covered the ranges of 0.5 ～ 20.0 μg/10 ml zirconium! IV) and 0 ～ 20.0 μg/10 ml fluoride ion with the Sandell sensitivities being 0.0013 μg/cm² for zirconium(IV) and 0.0016 μg/cm² for fluoride ion.     

Fluorimetric Determination of Trace Amounts of Scandium with Di-2-pyridyl-ketone 2-Furoylhydrazone

Abstract

The reaction of Di-2-pyridyl-ketone 2-furoylhydrazone (DPFH) with scandium in an aqueous ethanolic medium (4% v/v of ethanol) has been studied. A spectrofluorimetric method based on the formation of a fluorescent complex is proposed for the determination of scandium. With excitation at 387 nm, the scandium (III) chelate has an emission maximum at 492 nm; the reaction is carried out at pH 6.5–7.5. The accuracy and precision of the method are demonstrated by the analysis of synthetic mixtures containing various amounts of scandium. 10 – 140 ng/ml of scandium can be determined with a relative error of ±1.3%.     

Determination of Total and Fluoride Bound Aluminium in Tea Infusions by Ion Selective Electrode and Flame Atomic Absorption Spectrometry

ABSTRACT

Speciation of metallic compunds is important especially for their bioavailability. In this present study fluoride bound aluminium species were determined in tea infusion. Total aluminium was measured using flame atomic absorption spectrometry (FAAS). Free fluoride and total fluoride were measured by fluoride selective ion electrode (FISE) with the assistance of TISAB buffer solution used for adjustment of pH and total ionic strength, and ALCOA buffer solution which decomposes all of the Al-fluoride complexes in solution.

During the studies, the effects of pH and time on the formation of Al-F complexes and interference of some metal ions found in tea infusion such as Al³⁺, Mg²⁺, Fe²⁺, Fe³⁺ and Mn²⁺ on the concentration of free fluoride were investigated. The concentration of each Al-fluoride complexes in tea fusion were determined indirectly by calculation using pF-Mole Fraction Diagram. It was found that 1.13±0.15 mg 1^? of 12.00±0.86 mg 1^? total aluminium is fluoride bound aluminium, which means that appoximately 10% of total aluminium in tea infusion is complexed with fluoride.     

Polarographic and Voltammetric Study of the Sc(III)-Acid Chrome Blue K Complex and Determination of Trace Scandium

Abstract

A new system of polarographic adsorptive wave for determining trace scandium was proposed. In 0.2 mol/L NH₄OAc, the Sc(III)- ACBK [1,8- dihydroxy- 2- (2- hydroxy- 5- sulfo- 1- phenylazo)- 3,6- disulfo- naphthalene, called acid chrome blue K] complex emerged a sensitive adsorptive complex wave(Ep′ = -0.67V). The molar ratio of Sc(III) to ACBK in the complex was established as 1: 2 and the apparent stability constant β₂ = 2.7 × 10¹⁵. But for Y(III), the molar ratio was 1: 1 and β = 1.5 × 10⁵. Because of the particularity of Sc complex, the sensitivity and the selectivity of determination Sc are much better than that of other rare earth ions. The detection limit is 1.1 × 10^?7 mol/L for oscillopolarography and 2.0 × 10^?8 mol/L for adsorptive stripping voltammetry.     

Field determination of fluoride in drinking water using a polymeric aluminium complex of 5-(2-carboxyphenylazo)-8-hydroxyquinoline impregnated paper

A simple field method which allows the determination of fluoride in drinking water with a small handheld instrument called Arsenator was developed. Arsenator is a commercially available instrument which was used successfully for reliable determination of arsenic. In the proposed method the functionality of the Arsenator which is based on a photometric measurement of a spot on the reagent paper is expanded to analyse fluoride. A polymeric aluminium complex of 5-(2-carboxyphenylazo)-8-hydroxyquinoline (LH₂) has been prepared as a new specific reagent for fluoride. Job's method of continuous variation was adopted for the determination of the composition of the coloured complex, which was further characterized by UV-VIS spectroscopic studies. The molar absorptivity of the complex formation is 8.48?×?10³?L?mol^?1?cm^?1 at 410?nm. The coloured complex reacts with fluoride on an impregnated paper where its colour changes are dependent on the concentration of fluoride in water samples. The change in the colour was measured using the Arsenator. The method allows a reliable determination of fluoride in the range 0.3 to 2.0?mg?L^?1. Further spectophotometric determinations of fluoride in drinking water were also studied. The determination is based on the reaction of aluminium complex with fluoride in the examined samples. Beer's law is obeyed in the range 0.3 to 2.0?mg?L^?1 of fluoride at 495?nm. Sensitivity, detection limit and quantitation limit of the method were found to be 0.251?±?0.007?µg^?1?mL, 0.1?mg?L^?1 and 0.3?mg?L^?1, respectively. The optimum reaction conditions and other analytical conditions were evaluated. The effect of interfering ions on the determination is described. There is no interference by nitrate or chloride. Sulphate interfered only at high concentrations which are not expected in drinking water.     

Determination of Uranium in Natural Waters by Solid Phase Spectrometry

Abstract

A microdetermination method (at the μg1^?1 level) for uranium has been developed, based on Solid-Phase Spectrophotometry (SPS). The uranium reacts with pyridylazo-resorcinol in the presence of fluoride to form a 1:1:1 red ternary complex, which is fixed on an anion-exchange resin. The resin absorbance is measured directly, and allows the determination of uranium in the range of 1–10μg1^?1, with an RSD of 4%. The method has been applied to the determination of U(VI) in natural waters from wells located near the deposits of industrial wastes from a uranium mineral plant in Andujar (Spain).     

The Use of Zirconyl Xylenol Orange for the Post-Column Spectroscopic Detection of Fluoride in Ion Chromatrography

Abstract

A simple post column reaction detection system for fluoride is presented using the decolorization of the zirconyl xylenol orange complex. A 3[sgrave] detection limit of 0.05 μg F^? mL^?1 was achieved with a linear calibration function up to 10 μg F^? mL^?1. The methodology is suitable for the determination of F^? in potable water and some interferences studies were conducted with common cations namely Ca, Mg, Al and Fe(III).     

An improved method for the spectrophotometric determination of fluoride by addition of sodium dodecyl sulphate to the fluoride/lanthanum (III)/Alizarin fluorine blue system

The conventional spectrophotometric method for the determination of fluoride, based on the fluoride/lanthanum(III)/alizarin fluorine blue ternary complex, is improved by addition of sodium dodecyl sulphate. In 15% (v/v) acetone medium, the absorbance of the binary reagent complex is decreased and the reaction time is only 3 min under sonication. Beer's Law is obeyed at 574 nm for fluoride concentrations in the ranges 0.075–0.30 and 0.20–1.2 mg 1^?1; the apparent molar absorptivities are (1.6 ± 0.1) × 10⁴ and (1.5 ± 0.1) × 10⁴ mol^?1 cm^?1 fluoride levels, respectively. This method is applied to the determination of fluoride in bottled mineral waters.     

Scandium terminal imido complex induced intramolecular C–N bond cleavage and transformation

<正>1 X-ray crystallography Suitable single crystal of 2 was sealed in a thin-walled glass capillary, and data collection was performed at 293(2) K on a Bruker SMART diffractometer with graphite-monochromated Mo Kα radiation(λ = 0.71073 ). Suitable single crystals of 3and 4 were mounted under nitrogen atmosphere on a glass fiber, and data collection was performed at 133(2) K on a Bruker APEX2 diffractometer with graphite-monochromated Mo Kα radiation(λ = 0.71073 ). The SMART program package was used to determine the unit cell parameters. The absorption correction was applied using SADABS. The structures were solved     

Epoxy-based oligomeric probe bearing naphthalene units for selective turn-OFF fluorescent sensing of fluoride anion

A simple epoxy-based oligomer 1 bearing naphthalene unit at the chain-ends is reported to be highly selective ON–OFF type fluorescent probe for fluoride anion. The titled oligomer displayed fluorescence quenching upon addition of F^?, resulting in selective detection of fluoride anion over other anions, such as AcO^?, Cl^?, Br^?, I^?, HSO₄^?, NO₃^? and H₂PO₄^? in CH₃CN. Fluorescence experiments suggest the significant influence of the oligomer chain on the sensitivity and selectivity of 1 towards fluoride anion.     

Determination of Fluoride by Fluorescence Quenching

Abstract

A fluorescence quenching method for the determination of fluoride ion over the concentration range from 10^?9 to 10^?6M is presented. The fluoride ion is added to the fluorescent chelate of aluminum(III) and PAN [1- (2-pyridylazo)-2-naphthol]: the fluoride preferentially complexes the aluminum (III), displacing nonfluorescent PAN. Of the anions tested as possible interferences at equimolar levels, phosphate interferred seriously and iodide interferred somewhat.     

Spectrophotometric study of reactions of scandium,ytrium and lanthanum ions with some triphenylmethane dyes in the presence of cationic surfactants

Optimum conditions for the formation of ternary complexes of scandium, ytrium and lanthanum ions with chrome azurol S, eriochrome cyanine R and pyrocatechol violet in the presence of cetyltrimethylammonium, cetypyridinium and tetradecyldimethylbenzyl-ammonium (zephiramine) ions are described. The spectrophotometric determination of scandium with chrome azurol S and zephiramine exhibits the greatest sensitivity (? = 1.50 × 10⁵ l mol^?1 cm^?1 at 610 nm). In the spectrophotometric determination of scandium with eriochrome cyanine R and cetylpyridinium ion (? = 9.2 × 10⁴ at 600 nm), the interference caused by yttrium is the least. In the best method for yttrium (with pyrocatechol violet and zephiramine), the molar absorptivity is 3.3 × 10⁴ at 660 nm. Lanthanum does not form ternary complexes of analytical interest in these systems. Some aspects of the formation of ternary complexes with cationic surfactants are discussed.     

Synthesis,quantum chemical calculations,and luminescent properties of scandium,europium, gadolinium,and terbium 1-(2-pyridyl)naphtholate complexes

By reactions of 1-(2-pyridyl)naphth-2-ol (pynH) with silylamides Ln[N(SiMe₃)₂]₃ (Ln = Sc, Eu, Gd, or Tb), the Ln(pyn)₃ complexes of the metals have been synthesized. Only the scandium complex in a THF solution has displayed photoluminescence (band with a maximum at 455 nm and a halfwidth of 65 nm). Electroluminescent properties have been revealed for the scandium and terbium complexes. In an ITO/TPD/Sc(pyn)₃/Bath/Yb three-layer light emitting diode, the scandium complex exhibits yellow-green luminescence with a brightness of 4750 cd/m² at a voltage of 21 V. The terbium complex Tb(pyn)₃ in the same device has displayed a single, broad luminescence band with λ_max = 570 nm due to excimer emission. By density functional theory quantum chemical calculations, different structures of the complexes have been revealed, mononuclear for Sc(pyn)₃ and binuclear for Ln₂(pyn)₆. This difference in structure seems to be responsible for differences in electroluminescent activity between the synthesized complexes.     

Adsorptive Stripping Determination of Scandium(III) with Mordant Blue 9 on Silver Amalgam Film Electrode

A new adsorptive stripping voltammetric method for the determination of trace scandium(III) based on the adsorption of scandium(III)‐mordant blue 9 complex on the cyclic renewable mercury film silver based electrode (Hg(Ag)FE) is presented. The effects of various factors such as: preconcentration potential and time, pulse height, step potential and supporting electrolyte composition are optimized. The calibration graph is linear from 2 nM (0.09 μg L^?1) to 90 nM (4 μg L^?1) for a preconcentration time of 45 s, with correlation coefficient of 0.9995. For a Hg(Ag)FE with a surface area of 7.9 mm² the detection limit for a preconcentration time of 90 s is as low as 5 ng L^?1. The repeatability of the method at a concentration level of the analyte as low as 0.2 μg L^?1, expressed as RSD is 1.9 % (n=5). The proposed method was successfully applied and validated by studying the certified reference material (CRM 320 – river sediment) and natural samples with simultaneous recovery of Sc(III) from spiked water and sediment samples.