Studies on the extraction of sulfonamides from agricultural soils

The extraction of six sulfonamides (sulfadiazine, sulfadimidine, sulfathiazole, sulfachloropiridazine, sulfadimethoxine, and sulfaquinoxaline) from soils with different physicochemical characteristics and at several aging times was investigated. Conventional mechanical shaking, microwave-assisted extraction, ultrasound probe-assisted extraction and pressurized liquid extraction techniques were evaluated. The four techniques provided similar results when applied to freshly contaminated soils. However, microwave-assisted extraction was the most suitable to extract sulfonamide aged residues from soils. Microwave-assisted extraction was applied to eight soils aged for 3 months, using acetonitrile:buffer pH 9 (20:80) as the extraction solvent, and recoveries ranged from 15–25% for STZ to 42–64% for SDM.     

Simultaneous extraction and determination of fluoroquinolones,tetracyclines and sulfonamides antibiotics in soils using optimised solid phase extraction chromatography-tandem mass spectrometry

An analytical method was developed for the simultaneous extraction and determination of 18 fluoroquinolones (FQs), tetracyclines (TCs) and sulfonamides (SAs) antibiotics from soils using solid phase extraction and liquid chromatography-tandem mass spectrometry. The soils were extracted by different solvents with the help of mechanical shaking and ultrasonic treatment at 59?kHz, followed by a strong anion exchange (SAX) cartridge to clean up soil samples and a hydrophilic lipophilic balance (HLB) cartridge as enrichment. The method was evaluated by testing the following variables: extraction solvents, the type of SPE cartridges, solvent volumes, initial spiking levels and soil types (silty clay loam and clay loam soils). The soil extraction method was validated using these two types of soils, representing two typical agricultural soils in northern China. For 2?g soil, the extraction steps with the mixture of potassium phosphate buffer and acetonitrile (ACN) (1/1, v/v, pH 3.2) provided satisfactory recoveries. In the clay loam soil, the recoveries of all the compounds were from 56% to 89% at the spiking level of 50?µg?kg^?1 soil, and from 69% to 97% at the spiking level of 200?µg?kg^?1 soil, respectively. Recoveries in silty clay loam soil were similar to that in clay loam. The method was successfully employed using soil samples collected from a farmland and afforestion area irrigated with sewage in northern China. The result indicates that trace antibiotics in sewage may accumulate in soil irrigated by river water containing sewage.     

Multiresidue determination of pesticides in acid-clay soils from Thailand

Tropical and temperate soils differ with respect to their chemical conditions and mineral composition. Consequently, assessment of the contamination of tropical soils with pesticides requires methods that provide exhaustive extraction from the specific soil matrix and reliable quantification. Our objective was to optimize the simultaneous extraction and determination of 32 representative pesticides (organophosphates, organochlorines, synthetic pyrethroids, triazines, acetamides, carbamates, diphenyl ethers, acylalanines, oxadiazoles, thiadiazoles, and phenoxy compounds) frequently used in Thailand. The compounds were added to a clayey Ultisol-topsoil (45% clay) from the Yom Region in Northern Thailand. Ten different solvent mixtures were tested; the use of a shake extraction with acetone-ethyl acetate-water (3 + 1 + 1, v/v/v) was most effective in providing exhaustive and reproducible extraction of pesticides both from freshly fortified soil and from fortified soil after incubation for 14-28 days. The pesticides were separated and quantified by using gas chromatography with mass selective detection. Except for methamidophos, which was almost completely lost during sample workup, the recoveries of all pesticides from soil ranged from 68.6 to 104% (mean standard error, 2.8%) for freshly spiked samples and from 45.9 to 107% (mean standard error, 2.3%) for spiked samples incubated for 14 days. The use of internal standards compensated for the losses of most pesticides during workup and increased the mean recovery of the pesticides from freshly fortified soil to 96%. The method was successfully applied to the determination of environmental concentrations of pesticides in a range of Thai agricultural soils.     

微波辅助萃取/气相色谱-质谱联用分析蔬菜中的有机磷农药

建立了微波辅助萃取（MAE）/气相色谱-质谱联用法（GC-MS）测定蔬菜样品中二嗪磷、水胺硫磷的分析方法，研究了不同溶剂的萃取效率。选择二氯甲烷为萃取溶剂，采用二因素三水平的正交设计实验优化了萃取溶剂体积和萃取时间。方法的线性范围分别为二嗪磷和对硫磷4ng/g-400ng/g，水胺硫磷20ng/g-400ng/g，检出限分别为二嗪磷和对硫磷4ng/g-400ng/g、水胺硫磷20ng/g-400ng/g，检出限分别为二嗪磷0.29ng/g、对硫磷1.70ng/g、水胺硫磷2.30ng/g。测定200.0ng/g和50.0ng/g加标蔬菜样品，回收率为72.2%-102.0%,RSD为1.5%-11.0%。与传统的机械振荡萃取法相比，不仅萃取效率相当，而且还具有省时省溶剂的优点。     

Microwave assisted solvent extraction and coupled-column reversed-phase liquid chromatography with UV detection use of an analytical restricted-access-medium column for the efficient multi-residue analysis of acidic pesticides in soils.

A screening method has been developed for the determination of acidic pesticides in various types of soils. Methodology is based on the use of microwave assisted solvent extraction (MASE) for fast and efficient extraction of the analytes from the soils and coupled-column reversed-phase liquid chromatography (LC-LC) with UV detection at 228 nm for the instrumental analysis of uncleaned extracts. Four types of soils, including sand, clay and peat, with a range in organic matter content of 0.3-13% and ten acidic pesticides of different chemical families (bentazone, bromoxynil, metsulfuron-methyl, 2,4-D, MCPA, MCPP, 2,4-DP, 2,4,5-T, 2,4-DB and MCPB) were selected as matrices and analytes, respectively. The method developed included the selection of suitable MASE and LC-LC conditions. The latter consisted of the selection of a 5-microm GFF-II internal surface reversed-phase (ISRP, Pinkerton) analytical column (50 x 4.6 mm, I.D.) as the first column in the RAM-C18 configuration in combination with an optimised linear gradient elution including on-line cleanup of sample extracts and reconditioning of the columns. The method was validated with the analysis of freshly spiked samples and samples with aged residues (120 days). The four types of soils were spiked with the ten acidic pesticides at levels between 20 and 200 microg/kg. Weighted regression of the recovery data showed for most analyte-matrix combinations, including freshly spiked samples and aged residues, that the method provides overall recoveries between 60 and 90% with relative standard deviations of the intra-laboratory reproducibility's between 5 and 25%; LODs were obtained between 5 and 50 microg/kg. Evaluation of the data set with principal component analysis revealed that the parameters (i) increase of organic matter content of the soil samples and (ii) aged residues negatively effect the recovery of the analytes.     

Determination of phthalate esters in soil using a quick,easy, cheap,effective, rugged,and safe method followed by GC–MS

A quick, easy, cheap, effective, rugged, and safe procedure was designed to extract pesticide residues from fruits and vegetables with a high percentage of water. It has not been used extensively for the extraction of phthalate esters from sediments, soils, and sludges. In this work, this procedure was combined with gas chromatography with mass spectrometry to determine 16 selected phthalate esters in soil. The extraction efficiency of the samples was improved by ultrasonic extraction and dissolution of the soil samples in ultra‐pure water, which promoted the dispersion of the samples. Furthermore, we have simplified the extraction step and reduced the risk of organic solvent contamination by minimizing the use of organic solvents. Different extraction solvents and clean‐up adsorbents were compared to optimize the procedure. Dichloromethane/n‐hexane (1:1, v/v) and n‐hexane/acetone (1:1, v/v) were selected as the extractants from the six extraction solvents tested. C18/primary secondary amine (1:1, m/m) was selected as the sorbent from the five clean‐up adsorbents tested. The recoveries from the spiked soils ranged from 70.00 to 117.90% with relative standard deviation values of 0.67–4.62%. The proposed approach was satisfactorily applied for the determination of phthalate esters in 12 contaminated soil samples.     

Static pressurised liquid extraction of nitrated polycyclic aromatic hydrocarbons from soils with on-line filtration-preconcentration prior to gas chromatography-mass spectrometry detection

Nitrated polycyclic aromatic hydrocarbons have been extracted from both spiked and natural contaminated soils by using static pressurised liquid extraction. The variables governing the extraction (namely, pressure, extraction time, temperature and number of static extraction cycles) have been optimised using the experimental design methodology. A laboratory-made pressurised liquid extractor has been used allowing its coupling to a filtration-preconcentration system through a flow injection interface, thus providing a partially automated approach. Gas chromatography with MS-MS ion preparation mode has been used for individual separation-identification/quantification providing both high selectivity (no interferences were observed) and sensitivity (detection limits of low pg). The comparison of the proposed approach with the reference EPA Method 3540 has shown that both methods provide similar efficiencies but with dramatic saving of time by the former (30 min vs. 24 h). The use of water as leaching agent avoids the use of organic solvents, thus providing an environmentally friendly method.     

Effects of the matrix and sample preparation on the determination of fluoroquinolone residues in animal tissues

The effects of aqueous-organic solvent extraction and enzymic digestion sonication procedure on the isolation of spiked fluoroquinolones from poultry tissue have been studied. The highest recovery from spiked tissue was obtained using a mixture of trichloroacetic acid-acetonitrile (8:2) as extractant and an SDB1 cartridge for clean-up purposes. Validation data are presented for enrofloxacin, ciprofloxacin, sarafloxacin and difloxacin. The spiking procedure (spike contact time, spike solvent and matrix) had a small influence on the recovery of fluroquinolones from poultry muscle or liver. The effects of a different extraction on the determination of incurred enrofloxacin and its metabolite, ciprofloxacin, residues in poultry tissues have been investigated. The extraction procedures investigated--aqueous-organic solvent extraction, enzymic digestion or sonication--all gave similar results for incurred fluoroquinolone concentration in poultry muscle after correlation for spike recovery. The highest results were obtained in poultry liver when enzymic digestion has been used.     

Determination of selected polychlorinated biphenyls in soil and earthworm (Eisenia fetida) using a QuEChERS‐based method and gas chromatography with tandem MS

Soil and earthworms are important objects in soil pollution assessment and environmental behavior and toxicity study for polychlorinated biphenyls. Accelerated solvent extraction and solid‐phase extraction are generally required for the extraction and clean‐up of polychlorinated biphenyls in soil and earthworm, which are tedious and time‐consuming. In this work, a modified QuEChERS (quick, easy, cheap, effective, rugged, and safe) procedure combined with gas chromatography and triple quadrupole mass spectrometry was developed for the determination of 20 selected polychlorinated biphenyl congeners in soil and earthworm. Different extraction times, solvents, and clean‐up adsorbents were compared and optimized. The average recoveries from spiked soils ranged between 70 and 120% with satisfactory relative standard deviations for all the polychlorinated biphenyls. In earthworm, the recoveries of polychlorinated biphenyls 180, 183, and 189 were relatively low (< 70% in some spiking levels) compared to that of the other polychlorinated biphenyls. The limits of quantification were in the range of 0.01–0.05 ng/g. The method was successfully applied to the analysis of 66 agricultural soils. To our knowledge, a combined method based on QuEChERS for the determination of polychlorinated biphenyls in soil and earthworms has not been published before. The procedure proved to be simple, sensitive, efficient, and environmentally friendly.     

Comparison of the static,dynamic and static-dynamic pressurised liquid extraction modes for the removal of nitrated polycyclic aromatic hydrocarbons from soil with on-line filtration-preconcentration

The three operational modes of pressurised liquid extraction (PLE) (namely, static, dynamic and static-dynamic) have been applied for the extraction of nitrated polycyclic aromatic hydrocarbons from both spiked and natural contaminated soils. A comparison of the three modes in terms of experimental set-up used, extraction time needed for total removal of the analytes and precision has been carried out. The use of a flow-injection manifold as interface between every pressurised extractor and a filtration-preconcentration system has allowed the partial automation of the proposed approaches. Efficiencies close to 100% have been provided by the three operational modes. However, the static-dynamic mode has been proved as the most suitable alternative providing the shortest extraction time (25 min) versus the static (30 min) and the dynamic (50-70 min) modes. Gas chromatography with MS-MS ion preparation mode has been used providing both high selectivity (no interferences were observed) and sensitivity (detection limits of low pg). The comparison of the proposed approaches with the reference method 3540 of the US Environmental Protection Agency (EPA) has shown that both methods provide similar efficiencies with an important shortening in the extraction time (25-70 min by PLE versus 24 h by the EPA method). The use of water as leaching agent has avoided the use of organic solvents providing an environmentally friendly method.     

Extraction of aflatoxins B1 and G1 from maize by using aqueous sodium dodecyl sulfate

Aflatoxins are potent carcinogens produced by certain Aspergillus fungi. The aflatoxins were first discovered in the 1960s, and since then have been found to be distributed worldwide in a variety of commodities, foods, and feeds. Many of the early techniques for detecting aflatoxins involved extraction with halogenated solvents. With the increased availability and use of reversed-phase solid-phase extraction cartridges and the availability of immunoaffinity columns, aqueous mixtures of nonhalogenated solvents have been frequently used. To further reduce the need for solvents, we examined the effects of eliminating solvents during the extraction of maize, using aqueous mixtures of the detergent sodium dodecyl sulfate. After extraction and filtration, aflatoxins B1 (AFB1) and G1 (AFG1) were isolated by using commercially available immunoaffinity columns. The isolated AFB1 and AFG1 were derivatized with trifluoroacetic acid before separation by liquid chromatography with fluorescence detection. In spiked maize, the limits of detection were 0.5 and 1 ng/g for AFB1 and AFG1, respectively. Recoveries of AFB1 from maize spiked at 1-20 ng/g averaged 87.5% (range, 76.3-99.0%), with an average repeatability relative standard deviation (RSDr) of 4.0%. Recoveries of AFG1 from maize spiked at 2-20 ng/g averaged 80.4% (range, 70.3-85.8%), with an average RSDr of 3.5%. This is the first reported demonstration of an effective solvent-free extraction of aflatoxins from maize at ambient pressure, and this extraction procedure may serve to help reduce solvent consumption during aflatoxin analysis.     

An internal surface reversed phase column for the effective removal of humic acid interferences in the trace analysis of mecoprop in soils with coupled-column RPLC-UV

In the development of a screening method for the determination of residues of mecoprop in soils involving coupled-column RPLC-UV (228 nm) the cleanup performance of a 5 μm GFF-II internal surface reversed phase (ISRP, Pinkerton) analytical column (50 × 4.6 mm I.D.) as a first column was investigated. In comparison to an analytical C18 column the ISRP column substantially improved the separation between acidic analyte and co-extracted humic substances. Under the selected coupled-column conditions soil extracts obtained after hydrolysis with an aqueous alkaline solution, acidifying and centrifugation could be analyzed directly allowing the determination of mecoprop in soils to a level of about 0.02 mg/kg. A rapid concentration step on a 100 mg C18 solid phase extraction (SPE) cartridge was adopted into the procedure providing a limit of detection (S/N = 3) of 0.01 mg/kg of mecoprop in soil. The method was validated by analyzing freshly spiked soil samples and samples with aged residues. In case of freshly spiked samples the overall recovery was 87% (n = 18, spiked level 0.02–8.0 mg/kg) with a repeatability of 6.8% and a reproducibility of 8.3%. No significant decrease of the recovery was observed for samples with aged residues (n = 15, spiked level 0.1 and 8.0 mg/kg) during a storage of 29 days in the refrigerator at about 4?°C; a storage of 67 days provided a mean recovery of 76% (n = 14, spiked level 8.0 mg/kg).     

An internal surface reversed phase column for the effective removal of humic acid interferences in the trace analysis of mecoprop in soils with coupled-column RPLC-UV

In the development of a screening method for the determination of residues of mecoprop in soils involving coupled-column RPLC-UV (228 nm) the cleanup performance of a 5 μm GFF-II internal surface reversed phase (ISRP, Pinkerton) analytical column (50 × 4.6 mm I.D.) as a first column was investigated. In comparison to an analytical C18 column the ISRP column substantially improved the separation between acidic analyte and co-extracted humic substances. Under the selected coupled-column conditions soil extracts obtained after hydrolysis with an aqueous alkaline solution, acidifying and centrifugation could be analyzed directly allowing the determination of mecoprop in soils to a level of about 0.02 mg/kg. A rapid concentration step on a 100 mg C18 solid phase extraction (SPE) cartridge was adopted into the procedure providing a limit of detection (S/N = 3) of 0.01 mg/kg of mecoprop in soil. The method was validated by analyzing freshly spiked soil samples and samples with aged residues. In case of freshly spiked samples the overall recovery was 87% (n = 18, spiked level 0.02–8.0 mg/kg) with a repeatability of 6.8% and a reproducibility of 8.3%. No significant decrease of the recovery was observed for samples with aged residues (n = 15, spiked level 0.1 and 8.0 mg/kg) during a storage of 29 days in the refrigerator at about 4 °C; a storage of 67 days provided a mean recovery of 76% (n = 14, spiked level 8.0 mg/kg). Received: 4 May 1998 / Revised: 11 July 1998 / Accepted: 18 July 1998     

Molecularly imprinted polymers for the solid‐phase extraction of four fluoroquilones from milk and lake water samples

A method based on molecular crowding and ionic liquids as reaction solvents has been used for the synthesis of molecularly imprinted polymers. Levofloxacin was selected as the template, polymethyl methacrylate was the molecular crowding agent, and 1‐butyl‐3‐methylimidazolium tetrafluoroborate (ionic liquid) was selected as the reaction solvent and porogen. The optimized proportion for the mixed porogen was dimethyl sulfoxide/ionic liquid/polymethyl methacrylate 1:1.6:5 in chloroform (150 mg mL^?1). The morphology and chemical composition of levofloxacin imprinted polymers were assessed by scanning electron microscopy and Fourier transform infrared spectroscopy. The absorption experiments demonstrated that the levofloxacin imprinted polymers possess high selective recognition property to levofloxacin and analogs, including enrofloxacin, ciprofloxacin and gatifloxacin, which all belong to fluoroquinolones. An extraction method using levofloxacin imprinted polymers as sorbent followed by high‐performance liquid chromatography analysis was optimized for the determination of four fluoroquinolones in milk and lake water samples. Under the optimized conditions, good linearity was observed in a range of 5–1000 ng g^?1 with the limit of detection between 0.3 and 0.5 ng g^?1 for the four fluoroquinolones. The recoveries at three spiked levels ranged 82.4–98.3% with the relative standard deviation ≤4.9.     

Determination of fluoroquinolones in blood by matrix solid-phase dispersion extraction and CE

A simple and rapid method for the determination of residues of four fluoroquinolones in blood samples was developed. The method was based on matrix solid‐phase dispersion extraction followed by CE with ultraviolet detection. 1‐Butyl‐3‐methylimidazolium tetrafluoroborate aqueous solution was used as the background electrolyte for the separation of fluoroquinolones. The average recoveries of the four fluoroquinolones at two spiked levels ranged from 54.0 to 86.4% for pig blood, and 45.4 to 79.9% for deer blood, with the relative standard deviations <9.45%. Detection limits for the four fluoroquinolones in blood sample ranged from 0.15 to 0.31 μg/mL.     

Extraction of arsenic species from spiked soils and standard reference materials

The abilities of various extractants to recover four arsenic species [As(iii), As(v), dimethylarsinic acid (DMA), and monomethylarsonic acid (MMA)] from soils spiked with 20 micro g g(-1) As were investigated. The extractants were water, buffer solutions (citrate and ammonium dihydrogen phosphate), acidic solutions (phosphoric acid and acetic acid), a basic solution (sodium hydroxide) and household chemicals (vinegar and Coca Cola). Gentle shaking at room temperature with each extractant for 24 h gave different recoveries for the different arsenic species. With 0.1 M NaOH solution 46% As(iii), 53% DMA, 100% MMA and 84% As(v) were recovered. A rapid extraction procedure using a sonicator probe has been developed to obtain higher extraction efficiencies. Extracts of arsenic-spiked soil, SRM 2711 Montana soil and SRM 2709 San Joaquin soil were analyzed by HPLC-ICP-MS. In the SRM water extracts, DMA and MMA were identified in addition to inorganic arsenic. The solution detection limits (3s) were 0.1, 0.12, 0.13 and 0.15 ng mL(-1) for As(iii), DMA, MMA and As(v), respectively for HPLC-ICP-MS.     

Development of a procedure for the multiresidue analysis of pesticides in vineyard soils and its application to real samples

A procedure for multiresidue analysis was developed for the extraction and determination of 17 pesticides, including herbicides, fungicides, and insecticides, as well as certain degradation products, in vineyard soils from La Rioja region (Spain). Different solvents and mixtures were tested in spiked pesticide‐free soils, and pesticides were comparatively evaluated by gas chromatography with mass spectrometry and liquid chromatography with mass spectrometry. Recoveries >70%, with relative standard deviations <9%, were obtained when a mixture of methanol/acetone or a mixture of methanol/CaCl₂ 0.01 M for the most polar compounds was selected as the extraction solvent. Method validation was accomplished with acceptable linearity (r² ≥ 0.987) within the concentration range of 0.005–1 μg/mL corresponding to 1.667–333.4 μg/kg and 0.835–167.1 μg/kg for liquid chromatography with mass spectrometry and gas chromatography with mass spectrometry, respectively, and detection limits <0.4 μg/kg for the compounds were studied. The extraction method was applied to 17 real vineyard soil samples, and terbuthylazine and its metabolite desethylterbuthylazine were the most ubiquitous compounds, as they were detected in the 100% of the soils analyzed. The presence of fungicides was also high, and the presence of insecticides was lower than other pesticides. The results confirm the usefulness of the optimized procedure for monitoring residues in vineyard soils.     

Analysis of fluoroquinolones in animal feeds by liquid chromatography with fluorescence detection

An analytical method for the analysis of six fluoroquinolones (FQs) in animal feeds was developed. The sample treatment consists of a simple and rapid extraction of the analytes by manual shaking with an acetonitrile-water mixture containing hydrochloric acid without further sample cleanup. Matrix effects were minimized by diluting the extract with water. Determination was carried out by liquid chromatography using fluorimetric detection. The method was validated in-house in four different feed matrices (poultry, cow, pig, and lamb feed). Mean recoveries ranging from 80 to 105%, with relative standard deviations below 12%, were achieved from spiked animal feed samples on the 0.2-2.0 μg/g level. No relevant differences were observed between the studied feeds, this ensuring that the method was reliable for a wide variety of feed matrices. Decision limit and detection capability values are below 0.08 and 0.13 mg/kg, respectively, for most FQs. The results obtained demonstrate the feasibility of the analytical method developed for a routine use to control the illegal use of these substances in feeding stuffs.     

Trace level detection and identification of chemicals related to the chemical weapons convention from complex organic samples

A solid-phase extraction (SPE) method involving selective usage of solvents has been developed for trace level identification of chemical warfare agents (CWAs) present in a complex organic background. The total ion chromatograms obtained from direct gas chromatography-electron ionization mass spectrometric analysis of samples spiked with CWAs in the presence of diesel are very complex and dominated by hydrocarbon peaks and the same after treatment with SPE show distinct peaks corresponding to spiked chemicals. The recovery of samples from SPE is found to be 70-85% at the 10 ppm level.     

Investigation of U(VI) extraction with calixarene: Application to analysis of urine sample

A macrocyclic molecule, the calix[6]arene 4₆, functionalized with carboxy groups, has been studied and its extraction efficiency towards uranium determined in a two phases solvent-extraction system. Two solvents, dichloromethane and benzene were used to follow uranium extraction from media containing sodium ions. The study of the extraction parameters allowed proposing an extraction scheme with each solvent. The extraction efficiency was found to increase with pH, with an optimal efficiency of nearly 100%. No decrease of uranium extraction was observed in synthetic solutions containing sodium ions (spiked with²²Na) and/or²³⁹Pu. Under specific conditions, almost 100% of uranium have been extracted by the calixarene from real urine samples.