Determination of cyanide,thiocyanate, cyanate,hexavalent chromium,and metal cyanide complexes in various mixtures by ion chromatography with conductivity detection

The first aim of this study was to develop a selective, sensitive, and reliable method for direct simultaneous determination of cyanate, thiocyanate, and hexavalent chromium by ion chromatography (IC) with conductivity detection. The other target was to successfully determine cyanides by utilizing same chromatographic system. Yet, since cyanides can not be detected by the direct method, free cyanide ions were converted into cyanate with chloramine-T at alkaline pH. In addition, strongly complexed metal cyanides were converted into cyanate by using photo-oxidation following chloramine-T. Total cyanate ion obtained from developed methods were analyzed with IC. The chromatographic separations on anion exchange column were accomplished by optimized multistep gradient eluent program using NaOH as the eluent. Proposed method was applied for the simultaneous determination of cyanide and hexavalent chromium in electroplating bath solutions and in industrial wastewater. Cyanide and hexavalent chromium could be measured in the linear dynamic ranges of 0.6–961.5 and 0.9–118.5 µmol L^?1, respectively. The limit of detection and limit of quantification of cyanide were 0.18 and 0.61 µmol L^?1, and these values for chromium(VI) were 0.26 and 0.86 µmol L^?1, respectively.     

Headspace single-drop microextraction with in-drop derivatization and capillary electrophoretic determination for free cyanide analysis

A new method involving headspace single-drop microextraction (SDME) with in-drop derivatization and CE is developed for the preconcentration and determination of free cyanide. An aqueous microdrop (5 microL) containing Ni(II)-NH(3) (as derivatization agent), sodium carbonate and ammonium pyromellitate (as internal standard) was used as the acceptor phase. The extracted cyanide forms a stable Ni(CN)(4) (2-) complex which is then determined by CE. Common experimental parameters (sample and acceptor phase pH, extraction temperature, extraction time and sample ionic strength) affecting the extraction efficiency were investigated. Using headspace SDME, free cyanide can be effectively extracted from the neutral solutions, i.e. without the acidification of the sample which often is prone to errors due to incomplete liberation and artefactual cyanide production. Proposed SDME-CE method provided about 58-fold enrichment in 20 min. The calibration curve was linear for concentrations of CN(-) in the range from 0.25 to 20 micromol/L (R(2) = 0.997). The LOD (S/N = 3) was estimated to be 0.08 micromol/L of CN(-). Such a detection sensitivity is high enough for free cyanide determination in common environmental and physiological samples. Finally, headspace SDME was applied to determine free cyanide in human saliva and urine samples with spiked recoveries in the range of 91.7-105.6%. The main advantage of this method is that sample clean-up, preconcentration and derivatization procedures can be completed in a single step. In addition, the proposed technique does not require any sample pretreatment and thus is much less susceptible to interferences compared to existing methods.     

Determination of free amino acids by precolumn derivatization with phenylisothiocyanate. Application to wine samples

Summary A method to determine free amino acids by pre-column derivatization with phenylisothiocyanate is discussed. The method has been applied to determine free amino acids in wine samples, and the results have been compared with those obtained by means of an automatic orthophthal-aldehyde-9-fluorenylmethyloroformate (OPA-FMOC) method.     

柱前衍生-萃取阻断反应-高效液相色谱法测定化妆品中游离甲醛

建立了柱前衍生化-萃取阻断反应-高效液相色谱(HPLC)测定化妆品中甲醛的方法。化妆品中甲醛检测的难点是: 甲醛缓释剂类防腐剂在衍生过程中释放甲醛,影响游离甲醛的准确测定。以2,4-二硝基苯肼(DNPH)乙腈溶液-磷酸盐缓冲液(pH 2)(1:1, v/v)为提取溶液,于室温下快速衍生2 min后,立即加入二氯甲烷萃取,阻断衍生反应,经乙腈稀释后进行HPLC测定。以Agilent C18柱(250 mm×4.6 mm, 5 μm)为分离柱,乙腈-水(60:40, v/v)为流动相,流速为1.0 mL/min,于355 nm波长下检测。在洗发水、乳液、膏霜、洗手液、牙膏、指甲油、粉饼中分别添加50、100、500、1000 μg/g 4个浓度水平的甲醛,其回收率为81%～106%,相对标准偏差(n=6)＜5.0%。方法的定量限(以信噪比(S/N)＞10计)为50 μg/g。该方法快速、简便、重现性好,且可以有效避免甲醛缓释剂类防腐剂分解释放甲醛,适用于化妆品中游离甲醛的测定。     

Liquid-phase microextraction with in-drop derivatization combined with microvolume fluorospectrometry for free and hydrolyzed formaldehyde determination in textile samples

A novel approach for preconcentration and speciation analysis of trace amount of mercury from water samples was proposed by dispersive liquid–liquid microextraction (DLLME) coupled to high performance liquid chromatography with diode array detection (HPLC-DAD). Mercury species (Hg²⁺, methylmercury (MeHg⁺) and phenylmercury (PhHg⁺)) were complexed with dithizone (DZ) to form hydrophobic chelates and then extracted into the fine drops of extraction solvent dispersed in the aqueous sample by dispersive solvent. After extraction, the sedimented phase was analyzed by HPLC-DAD. Some important parameters affecting the DLLME such as extraction solvent and dispersive solvent type and volume, concentration of dithizone solution, sample pH, extraction time and salt effect were investigated. Ionic liquid 1-hexyl-3-methylimidazolium hexafluorophosphate ([HMIM][PF₆]) was found to be a suitable extractant for the chelates. Under the optimized conditions (extraction solvent: 70 μL of ionic liquid 1-hexyl-3-methylimidazolium hexafluorophosphate ([HMIM][PF₆]); dispersive solvent: 0.75 mL of methanol containing dithizone (0.02%, m/v); pH: 4; extraction time: 5 min; and without salt addition), the limits of detection for Hg²⁺, MeHg⁺ and PhHg⁺ were 0.32, 0.96 and 1.91 μg L⁻¹ (S N⁻¹ = 3) respectively, and the relative standard deviation (RSD) was between 4.1 and 7.3% (n = 5). Three real water samples (tap water, river water and lake water) spiked with mercury species were detected by the developed method, and the relative recoveries obtained for Hg²⁺, MeHg⁺ and PhHg⁺ were 89.6–101.3%, 85.6–102.0% and 81.3–97.6%, respectively.     

Trace analysis of sugars by HPLC and post-column derivatization

Summary A HPLC system with post-column derivatization for the quantitative analysis of sugars in complex matrices is described. As reagent a 0.2% solution of thymol in concentrated sulfuric acid has been used. The reaction is sensitive with reducing as well as non reducing sugars whereas sugar alcohols are discriminated. With this reagent and separation of sugars at high pH values with an anion exchange column it is possible to detect sugars in the ng range. Hence, it is possible to characterize wines not only by their fructose and glucose content but also by differences in the distribution of the other not fermentable sugars like trehalose, arabinose, galacturonic and glucuronic acid.     

Measurement of elastin hydrolysis by reverse-phase HPLC with on-line post-colum derivatization

Summary Excessive breakdown of elastin, a structural protein, may be related to aortic disease and emphysema. Since L-valyl-L-proline occurs in high concentrations in elastin, a rapid and sensitive method using HPLC with post-column on-line derivatization was used to measure the dipeptide from swine aortic tissue, and the amount of elastin present was determined. Elastin was extracted by alkaline hydrolysis. After neutralization and filtration, the sample was injected onto a ODS-2 gel column, and the dipeptide was eluted by a linear gradient of 0 to 10% of 1-propanol in 50 mM heptafluorobutyrate, pH 3, at a flow rate of 1 ml/min. The eluent was reacted with fluorescamine at pH 8.6, and fluorescence was detected at an excitation wavelength of 395 nm and a 455 nm cutoff emission filter.Presented at the 17th International Symposium on Chromatography, September 25–30, 1988, Vienna, Austria.     

Quantification of structurally related aliphatic amino alcohols in l‐valinol by hydrophilic interaction liquid chromatography separation combined with postcolumn derivatization and fluorescence detection

The amino alcohols in l‐ valinol were effectively separated and quantified using hydrophilic interaction chromatography with fluorescence detection. The influence of the mobile phase (salt type, buffer concentration, and pH) on retention was studied. A column TSKgel amide and mobile phase consisting of 10 mM acetate buffer pH 4.0 and acetonitrile (20:80, v/v) provided well‐ separated symmetric peaks of analytes. Fluorescence detection was performed using postcolumn derivatization with o‐phtaldialdehyde/2‐mercaptoethanol at an excitation and emission wavelength of 345 and 450 nm, respectively. Simple sample pretreatment and very high sensitivity represent the main advantages of the developed method. After validation, the method was successfully applied to the analysis of commercial samples of l‐ valinol.     

Catalytic effect of CO2 on peroxynitrite decomposition in the presence of cyanide complexes

The catalytic effect of CO2 on the kinetics and yields of peroxynitrite decomposition in the presence of cyanide complexes was investigated as a function of pH, substrate, bicarbonate and nitrite concentration. This revised version was published online in August 2006 with corrections to the Cover Date.     

Metal ion capillary zone electrophoresis with direct UV detection: Separation of metal cyanide complexes

Mixtures of cyanide complexes of iron(III), copper(I), iron(II), nickel(II), chromium(III), mercury(II), palladium(II), silver(I), cadmium(II), zinc(II), cobalt(II), and cobalt(III) have been separated by capillary zone electrophoresis using a fused silica capillary and 20 mM phosphate buffers containing 1–2 mM sodium cyanide. The complexes were detected by direct UV absorpticn at 214 nm; detection limits are in the mid ppb range for all metals except cadmium and zinc. The different detectability of various metal cyanide complexes enables the application of the method to the analysis of complex matrices such as cyanide plating bath solutions.     

Direct determination of hydrogen cyanide in cigarette mainstream smoke by ion chromatography with pulsed amperometric detection

The determination of hydrogen cyanide in cigarette mainstream smoke has been achieved by ion chromatography (IC) with pulsed amperometric detection (PAD). The proposed method of totally trapping whole cigarette mainstream smoke by Cambridge filters, which are treated with sodium hydroxide/ethanol solution, possesses the advantage of fast analysis time over the widespread used solution absorption method. The possible co-existing interferents are evaluated under the optimized detection conditions and excellent recoveries of cyanide are obtained. The cyanide content of absorption solution can be directly determined by the optimized IC-PAD method without any pretreatments. The linear range is 0.0147-2.45 μg/mL with R2 value of 0.9997. The limit of the detection is 3 μg/L for a 25 μL injection loop. The overall relative standard deviation of the method is less than 5.20% and the recovery range from 94.3% to 101.0%. The results obtained from the developed method are in good agreement with that of continuous flow analyzer (CFA) method.     

Highly active double metal cyanide complexes： Effect of central metal and ligand on reaction of epoxide/CO2

Various novel double metal cyanide (DMC) catalysts were successfully prepared by modifying the central metal (M) and one of cyanide ion (CN-) in Zna[M(CN)b]c complex. Such modifications have significant impact on the catalytic efficiency as well as the polymer selectivity for the reaction of PO/CO2. Zn–Ni(Ⅱ) DMC is a potential catalyst for alternating copolymerization of PO/CO2, and DMC catalysts based on Zn3[Co(CN)5X]2 (X = Br-and N3-) exhibit moderate efficiency for the production of polycarbonates. This research presents the preliminary exploration of novel DMC complex via chemical modification of its central metal and ligand.     

Indirect determination of free cyanide in water and industrial waste water by flow injection-atomic absorption spectrometry

A simple and rapid flow injection system is proposed for indirect determination of cyanide by flame atomic absorption spectrometry. It consists of a microcolumn of immobilized salen (N,N′-bis(salicylidene)ethylenediamine) on sodium dodecyl sulfate (SDS)-coated alumina saturated with silver ion and a carrier of dilute solution of sodium hydroxide (10⁻⁵ mol L⁻¹). The micro-column was located between the injection valve and nebulizer of atomic absorption spectrometry. Injection of 250 μL of aqueous cyanide standard or sample solution at pH range of 9–11 cause elution of silver as silver cyanide complexes, which was then measured by flame atomic absorption spectrometry. The absorbance was proportional to the concentration of cyanide in the sample. The graph of absorbance (as peak height) vs. cyanide concentration was linear over the concentration range of 0.1–10 mg L⁻¹ of cyanide, and the detection limit was 0.06 mg L⁻¹. The relative standard deviation at 1 and 3 mg L⁻¹ of cyanide concentration were 4.1 and 4.7%, respectively. The method was successfully applied to determination of cyanide in water and industrial waste waters, and the accuracy was examined through independent analysis by accepted method of pyridine-barbituric acid.     

A sensitive chromatographic determination of hydrazines by naphthalene-2,3-dialdehyde derivatization

A new high-performance liquid chromatography (HPLC) method for the sensitive simultaneous determination of hydrazine (Hy), monomethylhydrazine (MMH) and 1,1-dimethylhydrazine (UDMH) based upon the derivatization of hydrazines with naphthalene-2,3-dialdehyde and the separation of the derivatives on Zorbax Eclipse AAA column in a single chromatographic run under acidic conditions (pH 2.4) was developed. Hydrazine and monomethylhydrazine derivatives were found to be strongly fluorescent at λ_ex?=?273?nm, λ_em?=?500?nm. It was shown that UDMH derivative can be detected as non-fluorescent hydrazone at 290?nm by UV-detection. Limits of detection were 0.05?µg?·?L^?1 for Hy and MMH, and 1?µg?·?L^?1 for UDMH for the injection volume of 100?µL. The method was validated for water sample analysis. It proved to be selective, accurate and precise with the supplementary advantage of the simple and rapid sample preparation.     

离子色谱法检测马铃薯及其淀粉中氢氰酸

建立了马铃薯及其淀粉中氰化物离子色谱的检测方法。样品经超声、冷冻离心、通过在线过滤处理后直接用离子色谱进行检测。检出限为0.054 mg/L,氰化物的线性范围为0.136～2.72 mg/L;加标回收率为85%～93%;相对标准偏差(RSD)为1.2%,可以满足氰化物检测的要求。     

柱前衍生高效液相色谱法检测乳制品中羟脯氨酸

采用高效液相色谱法(HPLC)检测乳制品中羟脯氨酸(Hyp)。以RP-HPLC为分离模式,邻硝基苯磺酰氯为衍生剂,选用Hedera ODS-2色谱柱(250mm×4.6 mm,5μm),15 mmol/L磷酸盐缓冲液(pH 5.8)和乙腈为流动相梯度洗脱,检测波长为230nm,建立了在多种氨基酸中分离出羟脯氨酸的方法。Hyp在9.70×10-3～4.96 mmol/L范围内峰面积与浓度线性良好,相关系数为0.9999,加标回收率范围95.5%～102.7%,峰面积的相对标准偏差为1.5%。本法适用于检测乳制品中的Hyp,具有准确度高,操作简单等优点。     

Spectrophotometric determination of micro amounts of tetrathionate via its oxidation with permanganate

The reaction conditions of tetrathionate with permanganate were investigated by varying reaction time, temperature and amounts of sulphuric acid and permanganate. Under the optimal conditions for the reaction of tetrathionate with permanganate, both penta- and hexathionate were also oxidised; each one mol of polythionates (S _x O ₆ ^2– x=4, 5 and 6) reacts with (x–1.5) mol of permanganate. The proposed method is based on the reaction of tetrathionate with a given excess amount of permanganate in a sulphuric acid medium and on the spectrophotometric measurement of the iodine as triiodide formed by the oxidation of iodide with the excess of permanganate. This method could be successfully applied to the determinations of tetrathionate (4 × 10^–7 to 2 × 10^–5 M), pentathionate (3 × 10^–7 to 1.43 × 10^–5 M) and hexathionate (2 × 10^–7 to 1.11 × 10^–5 M), and gave a higher sensitivity than any previous methods without solvent extraction.     

Determination of clarithromycin in rat plasma by HPLC-UV method with pre-column derivatization

A novel high-performance liquid chromatographic (HPLC) method using pre-column derivatization and UV detection at 275 nm for the determination of clarithromycin in rat plasma has been validated. Clarithromycin was extracted from plasma sample spiked with internal standard (erythromycin) under alkaline condition with ethyl ether and derivatizated with trimethylbromosilane. The analyses were run on a C₁₈ column, maintained at 40 °C during elution, using a mobile phase comprised of potassium dihydrogen phosphate (50 mM, pH 6.8, contained 0.7% triethylamine), acetonitrile, and methanol (30:45:25, v/v/v). The standard calibration curve for clarithromycin was linear (r² = 0.9998) over the concentration range of 0.1-10 μg ml⁻¹ in rat plasma. The limit of detection (LOD) and limit of quantitation (LOQ) was 30 ng ml⁻¹ and 0.1 μg ml⁻¹ respectively. The intra- and inter-day assay variability range was 2.6-7.4% and 3.3-8.5%, respectively. This method has been successfully applied to a pharmacokinetic study of clarithromycin in rats.     

Determination of free cyanide and zinc cyanide complex by capillary electrophoresis

A capillary electrophoretic (CE) protocol was developed for the separation and quantification of free cyanide and zinc cyanide complex, two key species in gold cyanidation of zinc-bearing sulfidic ores. Several common carrier electrolytes were implemented in an indirect UV detection method. The effect of electric field strength, injection volume, concentration of electro-osmotic flow (EOF) modifier and UV-absorbing agent in background electrolyte (BGE) was examined while peak height, peak area and noise were considered for optimization. The best results were obtained using a BGE that contained 35 mM sodium chromate, 12 mM free cyanide and 0.45 mM hexamethonium bromide at pH 10.5. Free cyanide concentration was compared to that measured with the conventional silver nitrate titration method in solutions containing free cyanides and weak cyano-complexes. The developed CE protocol proved very robust in capturing the concentration of free cyanides (4% error) unlike the titration method which exhibited substantial sensitivity to the interfering weak cyano-complexes (38% error).     

Indirect spectrophotometric determination of cyanide

A spectrophotometric method for cyanide based on its inhibition of the colour formation reaction between nickel(II) and 3-(4,5-dimethyl-2-thiazolylazo)-2,6-dihydroxybenzoic acid has been developed, and allows the determination of down to 0.1 g of cyanide. Most of the interferences can be avoided by displacement of the hydrogen cyanide using an arsine generator.