Wetting properties of bis(trifluoromethyl)carbinyl acrylate polymers

A series of bis(trifluoromethyl)carbinyl acrylate monomers [Y-C(CF₃)₂ O? CO? CH?CH₂] in which Y is CH₃, CH₃CH₂, CH₃CH₂CH₂, CH₃CH₂CH₂CH₂, C₆H₅, H, F, CF₃, N₃, CN, and CH₃OCH₂CH₂O, was prepared. Polymers were easily prepared from all of these monomers except where Y = CN, wherein a variety of initiation methods failed to produce high molecular polymer. Wettabilities of the polymer films were examined by means of contact angle measurements by using n-alkane test liquids and water. Values of the dispersion force contribution (γs^d) and the polar force contribution (γs^p) to the solid surface energy were calculated by employing both geometric and harmonic mean approximations. Values of γs^d calculated by either method agreed well with γ_c (critical surface tension) values determined graphically from contact angle data employing n-alkane test liquids, confirming the suggestion that γ_c is an approximate measure of the dispersion force contribution to solid surface energy. Values of γs_d ranged from 15 dyne/cm (Y = F or CF₃) to 25 dyne/cm (Y = C₆H₅). Values of the polar force contribution to solid surface energy (γs^p) varied from 0.6 dyne/cm (Y = CH₃CH₂CH₂CH₂) to 3.4 dyne/cm (Y = CH₃OCH₂CH₂O) when calculated by the geometric mean equation. The values of γs^p obtained from the harmonic mean equation followed the same trend upon varying substituents, but were larger in value, ranging from 2.9 dyne/cm (Y = CH₃CH₂CH₂CH₂) to 7.5 dyne/cm (Y γ CH₃OCH₂CH₂O).     

Dispersion and polar contributions to surface tension of poly(methylene oxide) and Na-treated polytetrafluoroethylene

Average values for dispersion γ_s^d and polar γ_s^d contributions of the solid surface tension γ_s γ_s^d + γ_s^p for poly(methylene oxide) (PMO) and Na-treated polytetrafluoroethylene (PTFE) are determined by a new computational analysis of wettability data. PMO displays γ_s^d equals; 21.8 ± 0.9 and γ_s^p = 11.5 ± 1.5 dyn/cm while Na-treated PTFE displays γ_s^d = 36.1 ± 3.0 and γ_s^p = 14.5 ± 2.9 dyne/cm. These surfaces present the highest fractional surface polarity p_s = γ_s^p/γ_s = 0.29-0.35 yet encountered for organic polymers or oriented monolayers. These unusual surface tension properties are correlated with surface chemistry and adhesion phenomena.     

Roughness and anisotropy effects on wettability of polytetrafluoroethylene and sodium-treated polytetrafluoroethylene

The effect of roughness on wettability of skived polytetrafluoroethylene (PTFE or Teflon) and Na-treated PTFE film were studied by advancing contact angle measurements. The effect of an anisotropic force field of elongated Na-treated PTFE on the shear bond strength were also studied as a function of elongation. The results are analyzed in terms of London dispersion γs^d and Keesom polar γs^p contributions to surface energy γs. It was found that the roughness effect on wettability of PTFE is significant for untreated PTFE and negligible for Na-treated PTFE. Our shear bond strength σ_b analysis of elongated Na-treated PTFE showed that σ_b is influenced by an anisotropic force field and the σ_b increases with the fractional polarity p = γs^p/γs but decreases with the dispersion fraction d = γs^d/γs of solid-vapor surface tension γs = γs^d + γs^p     

Critical surface tension of poly(vinyl butyral) and poly(vinyl benzal) multilayers and its relation to their surface orientation. I. Effect of surface pressures during deposition

Critical surface tensions γ_c of poly(vinyl butyral) and poly(vinyl benzal) multilayers built up by the Langmuir-Blodgett method were measured with polyhydric alcohols and n-alkanes. The γ_c values of both polymer multilayers increased with increasing pressures of the piston oils used to control pressures of polymers on the water surface during deposition. The γ_c value of poly(vinyl butyral) multilayers built up to lower pressure of the piston oil was approximately consistent with a crystalline hydrocarbon surface, while the γ_c value of the multilayer built up to higher pressure of the piston oil was approximately consistent with a—CH₃ rather than a ? CH₂ ? CH₂? surface. All results for γ_c values of poly(vinyl benzal) multilayers were very close to the γ_c value of benzene ringrich surface. The γ_c value of the multilayer built up to lower pressure of the piston oil almost coincided with the γ_c value for amorphous polystyrene, while the γ_c value for the multilayer built up to higher pressure of the piston oil was in fair agreement with γ_c for an aromatic ring edge in the crystalline state. Values of γ_s^d, the dispersion force contribution to the surface free energy of multilayers calculated by Fowkes' relation, were in fair agreement with the corresponding observed γ_c values, respectively. It is concluded from these measurements that orientations and surface structures in both polymer multilayers are affected by pressure change of piston oils. The properties on monolayers of two polymers at a air-water interface and on barium stearate multilayers are also presented.     

A study of the surface analysis of some water‐soluble polymers by inverse gas chromatography

The surface characterization of 2‐(dimethylamino)ethylmethacrylate (DMA) and 2‐(N‐morpholino)ethylmethacrylate (MEMA) homopolymers and DMA–MEMA diblock copolymer was studied using inverse‐gas chromatography (IGC). The analyzed surface properties of (co)polymers were the dispersive component of the surface energy ( ) and the acid–base characters of (co)polymer surfaces. The specific free energy (ΔG^sp), enthalpy (ΔH^sp), and entropy (ΔS^sp) of adsorption of polar probes on (co)polymers were calculated. The values of ΔH^sp were correlated with both the donor and the modified acceptor numbers (AN) of the probes to quantify the acidic K_A and the basic K_D parameters of (co)polymer surfaces. The values obtained for the K_A and K_D parameters indicated basic characters for the surface of (co)polymers. The dispersive component values of the surface energy and the acid–base surface parameters of the DMA–MEMA diblock copolymer surface were found to be between those homopolymers as expected. Copyright © 2008 John Wiley & Sons, Ltd.     

The Effect of –(C6F4)– on the Surface Free Energy of Main‐Chain Liquid Crystalline and Crystalline Polymers

Novel fluorinated main‐chain liquid‐crystalline/crystalline polymers were prepared through thin film polymerization to investigate the effect of –(C₆F₄)– on the surface free energy. The fluorine in the phenyl rings does not lower the total surface free energy of the thin copolymer films, compared to those without fluorine. Interestingly, the Lewis acid components (γ⁺) of the surface free energy of the fluorine‐containing polymers increase with an increase in the –(C₆F₄)– content, indicating the increasing electron accepting character of the surface.     

Polymers derived from fluoroketones. III. Monomer synthesis,polymerization, and wetting properties of poly(allyl ether) and poly(vinyl ether)

The synthesis and polymerization of a series of perhaloalkyl allyl and vinyl ethers derived from perhaloketones is described. Data on the critical surface tension of wetting (γ_c) for high molecular weight polymers of heptafluoroisopropyl vinyl ether and low molecular weight poly(heptafluoroisopropyl allyl ether) is also presented. Preparation of the allyl ethers is a one-step, high-yield displacement reaction between the potassium fluoride–perhaloacetone adduct and an allyl halide, such as allyl bromide. The vinyl ethersare prepared by a two-step process which involves displacement of halide from a 1,2-dihaloethane with a KF–perhaloacetone adduct and dehydrohalogenation of the 1-halo-2-perhaloalkoxyethane to a vinyl ether. Low molecular weight polymers were obtained with heptafluoroisopropyl allyl ether by using a high concentration of a free-radical initiator. The low molecular weight poly(heptafluoroisopropyl allyl ether) had a γ_c of 21 dyne/cm. No polymer was obtained with tributylborane–oxygen or with VCl₃–AIR₃, with gamma radiation, or by exposure to ultraviolet light. High molecular weight polymers were obtained from heptafluoroisopropyl vinyl either by using either lauryl peroxide or ultraviolet light but not by exposure to BF₃–etherate. The γ_c for poly(heptafluoroisopropyl vinyl ether) ranged from 14.2 to 14.6 dyne/cm., and the significance of this value is discussed in relation to the γ_c for poly(heptafluoroisopropyl acrylate).     

Synthesis and Surface Chemical Properties of Adhesive Protein of the Asian Freshwater Mussel,Limnoperna fortunei

The adhesive polydecapeptide poly(Lys‐Pro‐Thr‐Gln‐Tyr‐Ser‐Asp‐Glu‐Tyr‐Lys) (average repeating number, n = 5), which is the consensus sequence of the Asian freshwater mussel Limnoperna fortunei adhesive protein (Lffp), has been synthesized by the polycondensation of the active esters. The surface chemical experiments revealed the following characteristics of the freshwater adhesive protein: (i) wettability of the Lffp solution is affected by the polar component value (γ_s^p) of the surface free energy of the substrate, and a substrate having a γ_s^p less than 10 mJ·m^–2 exhibits a reduced wettability of the Lffp solution; (ii) the comparison of wettability of native Lffp with synthetic Lffp suggests that the decapeptide sequence, ‐Lys‐Pro‐Thr‐Gln‐Tyr‐Ser‐Asp‐Glu‐Tyr‐Lys‐, contributes to the interaction with the underwater surface; (iii) the Lffp tends to adsorb on nonpolar surfaces that have a low γ_s^p value; and (iv) the adsorption ability of the freshwater adhesive protein is less than that of the marine adhesive protein because of the higher hydrophilicity of the freshwater adhesive protein. An antifouling examination indicated that a γ_s^p value of the substrate surface of less than 10 mJ·m^–2 should achieve a higher antifouling effect towards the L. fortunei attachment. These results are the first findings for the development of a freshwater antifouling strategy based on the molecular mechanism underlying the attachment of L. fortunei.     

Re‐formation Reaction of Cyclic Nitroxide‐Based Alkoxyamines: Steric and Polar/Stabilization Effects

In nitroxide‐mediated radical polymerization, the polymerization times decrease with the increasing re‐formation rate constant of the C? ON bond (→ alkoxyamine) between the growing polymer chain and the nitroxide radical. The factors influencing the re‐formation rate constant are of considerable interest, but up to now, the polar/stabilization effects have not been addressed thoroughly. The combination of new data with previously reported data now showed that the re‐formation rate constant k_c increases with the increasing polar character of the substituents attached to the nitroxide moiety. The polar/stabilization effects are weaker for the re‐formation than for the homolysis of the C? ON bond, and may be mainly attributed to the relocation of the odd electron onto the O‐atom of the N? O moiety, i.e., the stabilization of the nitroxide moiety. Hence, it is possible to predict the values of k_c by combining both the polar/stabilization (σ_I) and steric effects (E ), i.e., log(k_c/M ^?1 s^?1) = 9.86 + 0.57 ? σ_I + 0.40 ? E_s.     

Determination of the surface properties of untreated and chemically treated kaolinites by inverse gas chromatography

Inverse gas chromatography is used to study the surface properties of the untreated and chemically treated kaolinite samples. Changes in the enthalpy of adsorption for a variety of probes and in the surface energy of clays are measured and the effect of modification of the natural clay after chemical treatment with Na₂CO₃ is determined. The surface energy of the natural clay increased by the modification due to an increase in the surface area. It can be concluded that the dispersive component of surface free energy, γ _s ^d , decreases with temperature in the 200–275°C temperature range for both samples. Temperature coefficients of γ _s ^d for untreated and modified kaolinites are −0.1185 and −0.3966 mJ/(m² °C) with the correlation coefficients (R ²) of 0.8479 and 0.965, respectively. From the retention data for polar probes at infinite dilution, information on the accessibility of surface sites to the probes and on the acid-base character of the surface is obtained. The specific free energy of adsorption, the specific enthalpy of adsorption (ΔH ^sp), and the specific entropy of adsorption of polar probes on initial and modified kaolinites are determined. The ΔH ^sp values correlated with the donor numbers and modified acceptor numbers of the probes to quantify the acidity (K _A) and basicity (K _D) parameters of clay surfaces. The values of K _A and K _D for initial and modified kaolinites are determined to be 0.1202 and 0.2803; 0.0130 and 0.0408 with the correlation coefficients of −0.9805 and −0.9782, respectively. The unmodified clay sample indicated a more acidic character, while the modified clay sample conferred a largely basic character. Consequently, the predominant surface basicity of the modified kaolinite agrees with expectation, bearing in mind the treatment with Na₂CO₃, taking into consideration that such a modification contributes to a decrease in the hydrophilicity of the surface and also results in the surface showing only weak Lewis acidity. The text was submitted by the authors in English.     

Application of inverse gas chromatography in the surface characterization of diethanol amine modified polystyrene based polymer

In the present work, diethanol amine modified polystyrene based polymer (PVBC-Diethanol amine) was synthesized and characterized, then surface properties of the polymer were examined by inverse gas chromatography method at infinite dilution. The retention diagrams obtained based on the interaction of polar and nonpolar probes with the polymer were drawn over a temperature range from 30 to 55 °C. Through the diagrams, the dispersive component of the surface free energy, g _S ^D of the polymer surface, and the specific enthalpy of adsorption, DH _A ^S , of probes on the polymer were also calculated. Lewis acid, K _A , and Lewis base, K _D , parameters of PVBC-Diethanol amine surface were determined. The values of K _A and K _D indicated that PVBC-Diethanol amine surface exhibited a basic behavior.     

Polymer Electron Acceptors Based on Fluorinated Isoindigo Unit for Polymer Solar Cells

Most of efficient polymer electron acceptors for polymer solar cells (PSCs) are based on naphthalene diimide or perylene diimide as the electron deficient building block. In this paper, for the first time, we report polymer electron acceptors based on fluorinated isoindigo (F‐IID) as the electron deficient building block. We synthesized two polymer electron acceptors consisting of alternating F‐IID unit and thiophene/selenophen unit. They show low‐lying LUMO/HOMO energy levels of –3.69/–5.69 eV, high electron mobilities of 1.31×10^–5 cm²·V^–1·s^–1 and broad absorption spectra with the optical bandgap of 1.61 eV. PSC devices using the two F‐IID‐based polymers as polymer electron acceptors show encouraging power conversion efficiencies (PCEs) of up to 1.50% with an open‐circuit voltage (V_OC) of 0.97 V, a short‐circuit current density (J_SC) of 2.91 mA·cm^–2, and a fill factor (FF) of 53.2%. This work suggests a new kind of polymer electron acceptors based on F‐IID unit.     

Examination of Polystyrene by Inverse GC: Part 1. Below Glass Transition Temperature

The surface properties of polystyrene were investigated by inverse gas chromatography at infinite dilution region. The standard enthalpy (??H ⁰), entropy (??S ⁰) and free energy (??G ⁰) of adsorption were calculated for the adsorption of n-alkanes (n-hexane, n-heptane, n-octane, n-nonane, n-decane) and some polar probes (acetone, ethyl acetate, DCM, chloroform, THF) on polystyrene. Additionally, the dispersive (London) component of the surface free energy (?? _S ^d ),  surface Lewis acidity (K _A ) and Lewis basicity (K _D ) of polystyrene surface were determined. The values obtained for K _A and K _D by three different methods demonstrate that polystyrene surface has a basic nature.     

Interfacial Properties of Poly(Caprolactone) and Derivatives

Abstract

Monolayers of biodegradable polymers, poly(caprolactone) (PCL), poly(caprolactone) diol (PCL‐diol), and poly(caprolactone) triol (PCL‐triol) in the air/water interface were studied and characterized. The Langmuir–Blodgett technique was used for the monolayer transfer onto hydrophilic and hydrophobic solid substrates. The results obtained in both cases are dependent on the functional groups incorporated in the respective polymers. The surface energy (SE), and the polar and dispersion contributions, γ^p and γ^d, respectively, were obtained by wettability measurements. For polymeric spin‐casted thin films deposited over glass, the results also indicate an increment in the polymer hydrophilicity by hydroxyl groups insertion.     

Surface Characterization of Sepiolite by Inverse Gas Chromatography

Inverse gas chromatography (IGC) was applied to characterize the surface of sepiolite. The adsorption thermodynamic parameters (the standard enthalpy (ΔH ⁰), entropy (ΔS ⁰) and free energy of adsorption (ΔG ⁰)), the dispersive component of the surface energy (γ _S ^d ), and the acid/base character of sepiolite surface were estimated by using the retention time of different non-polar and polar probes at infinite dilution region. The specific free energy of adsorption (ΔG ^sp ), the specific enthalpy of adsorption (ΔH ^sp ), and the specific entropy of adsorption (ΔS ^sp ) of polar probes on sepiolite were determined. ΔH ^sp were correlated with the donor and modified acceptor numbers of the probes to quantify the acidic K _A and the basic K _D parameters of the sepiolite surface. The values obtained for the parameters K _A and K _D indicated an acidic character for sepiolite surface.     

Conformational Analysis of Biphenyl Derivatives. I. A Novel Steric Constant from the Internal Rotation Rate of 2,2′‐Bis‐(N‐Substituted Carbamoylmethyl)Biphenyl by Means of Dynamic NMR

A novel scale of steric substituent constant E_s^D is defined from the correlation of the logarithms of the internal rotation rate (k_r) at 393 K with Hancock (E_s^c) steric constant by means of dynamic NMR. In the inhibition of Pseudomona species lipase by 2,2′‐bis‐(N‐substituted carbamoylmethyl)biphenyls (1‐8), the logarithms of bimolecular rate constants are multiply correlated with both the Taft substituent constant σ* and E_s^D.     

The association of urethane-polyethyleneoxide (HEUR) thickeners,as studied by NMR self-diffusion measurements

The concentration and molecular weight dependence of the self-diffusion coefficient (D _self) of associative polymers of HEUR-type in aqueous solution have been investigated using FT-PGSE-NMR technique. The idea of three-dimensional network formation as a result of aggregation of the hydrophobic end-groups of the polymer in junctions is supported through the observed dramatic lowering ofD _self with increased concentration. The network-formation efficiency depends on the polymer molecular weight as well as the hydrophobicity of the end-groups.A double logarithmic dependence of the self-diffusion coefficient versus concentration (c) has been observed:D _selfc ^–a1,a2 . The first exponent,a ₁, is valid at low concentration, <1% polymer per weight solution, and ranges from 0.5 to 1, whereas the second exponent,a ₂, describing systems of higher concentration, ranges from 2 to 2.7.     

Neutron Scattering Studies of Structure and Self-Assembly of Star-Shaped Polymers with Fullerene Centres in Solutions

Protonated star-shaped polystyrenes with single and double fullerene C₆₀ core and the hybrid stars with pairs of polar and non-polar arms (tertbuthylmetacrylate, polystyrene) have been studied in deuterated toluene (20 °C) by small-angle neutron scattering at low and moderate polymer concentrations (c₁ ∼ 1 g/dl, c₂ ∼ 3–6 g/dl) to evaluate the peculiarities of fullerene centre action on polymers self-assembly in solutions. As we found, the cores composed of two fullerenes, linked via Si(CH₃)₂-bridge, induce stars' anisotropic interactions and association into chain-like structures (correlation radius ∼400–600 nm). Meanwhile, the single-core stars of polystyrene and hybrids organize globular clusters (size ∼ 10³ nm) those geometry do not change significantly by polymer content variation.     

CAS SCF Cl calculations for the 3Σ−g, 1Σ+g, 3Σ+u, and 5Δu states of Sc2

CAS SCF CI (SD) calculations have been carried out for the ³Σ^?_g, ¹Σ⁺_g, ³Σ⁺_u, and ⁵Δ_u states of Sc₂ using large gaussian basis sets. The ³Σ^?_g, ¹Σ⁺_g, and ³Σ⁺_u states arise from the ²D(4s² 3d¹) + ²D(4s² 3d¹) limit of Sc₂ and are found to be only weakly bound (D_c ≈ 0.06 eV and R_c ≈ 8.0a₀). The ⁵Δ_u state arises from the ²D(4s² 3d¹) + ⁴F(4s¹ 3d¹ 4p¹) atomic limit. This state is found to be strongly bound relative to its limits (D_c ≈ 0.8 eV and R_c ≈ 7.0a₀).     

Effect of chain architecture on the phase transition of star and cyclic poly(N‐isopropylacrylamide) in water

The heat‐induced phase transition of aqueous solutions of Poly(N‐isopropylacrylamide) (PNIPAM) in water is examined for a four‐arm PNIPAM star (s‐PNIPAM), a cyclic PNIPAM (c‐PNIPAM), and their linear counterparts (l‐PNIPAM) in the case of polymers (1.0 g L^?1) of 12,700 g mol^?1 < M_n < 14,700 g mol^?1. Investigations by turbidity, high‐sensitivity differential scanning calorimetry (HS‐DSC), and light scattering (LS) indicate that the polymer architecture has a strong effect on the cloud point (T_c: decrease for s‐PNIPAM; increase for c‐PNIPAM), the phase transition enthalpy change (ΔH decrease for s‐PNIPAM and c‐PNIPAM), and the hydrodynamic radius of the aggregates formed above T_c (R_H: c‐PNIPAM < s‐PNIPAM < l‐PNIPAM). The properties of s‐PNIPAM are compared with those of previously reported PNIPAM star polymers (3 to 52 arms). The overall observations are described in terms of the arm molecular weight and the local chain density in the vicinity of the core of the star, by analogy with the model developed for PNIPAM brushes on nanoparticles or planar surfaces. © 2016 Wiley Periodicals, Inc. J. Polym. Sci., Part B: Polym. Phys. 2016 , 54, 2059–2068.