Analysis of Terbumeton and its Major Metabolites by SPE and DAD-HPLC in Soil Bulk Water

A rapid and inexpensive method for simultaneous quantification of terbumeton (TER), and its major potential metabolites (TED; terbumeton-desethyl, TOH; terbumeton-2-hydroxy and TID; terbumeton-deisopropyl) in soil bulk water (SBW) samples is proposed. The analytical method involves extraction–concentration from SBW samples using a graphitized carbon black (GCB) cartridge followed by their separation–detection by reversed-phase high-performance liquid chromatography analysis using a C₁₈ column and a diode array detector. A mobile phase of acetonitrile−0.005 mol L⁻¹ phosphate buffer (pH 7.0) (35:65, v/v) at a flow rate of 0.8 mL min⁻¹ in isocratic elution mode has been used. After optimization of the extraction and separation conditions, this method can be used for the simultaneous determination of investigated compounds in the range of the international limits of 0.1 μg L⁻¹. For TER the detection limit was 0.009 μg L⁻¹ and it was 0.100, 0.550, and 0.480 μg L⁻¹ for TED, TOH, and TID, respectively. The recoveries of TER, TED, TOH, and TID from SBW samples, measured at three levels of concentration range, were found to be between 48.0 and 102.0%. The intra-day precision measured by relative standard deviation (RSD) was always lower than 9.0%.     

Use of liquid chromatography/electrospray ionization tandem mass spectrometry to study the degradation pathways of terbuthylazine (TER) by Typha latifolia in constructed wetlands: identification of a new TER metabolite

S-Triazines are used worldwide as herbicides for agricultural and non-agricultural purposes. Although terbuthylazine (TER) is the second most frequently used S-triazine, there is limited information on its metabolism. For this reason, an analytical method based on liquid chromatography/electrospray ionization tandem mass spectrometry (LC-ESI MS/MS) has been developed aiming at the identification of TER and its five major metabolites (desisopropyl-hydroxy-atrazine, desethyl-hydroxy-terbuthylazine, desisopropyl-atrazine, hydroxy-terbuthylazine and desethyl-terbuthylazine) in constructed wetland water samples. The separation of TER and its major metabolites was performed by reversed-phase high-performance liquid chromatography (HPLC) on a C(8) column using a gradient elution of aqueous acetic acid 1% (solvent A) and acetonitrile (solvent B), followed by MS/MS analysis on a triple quadrupole mass spectrometer. The data-depended analysis (DDA) scan approach has been employed and the main degradation pathways of both hydroxyl and chloro (dealkylated and alkylated) metabolites are elucidated through the tandem mass spectral (MS/MS) interpretation of triazine fragments under CID conditions. In addition, another major metabolite of TER, namely N2-tert-butyl-N4-ethyl-6-methoxy-1,3,5-triazine-2,4-diamine, has been identified. This methodology can be further employed in biodegradation studies of TER, thus assisting the assessment of its environmental impact.     

Determination of fipronil and its major metabolites in vegetables,fruit and soil using QuEChERS and gas chromatography-mass spectrometry

A rapid, simple and selective gas chromatography with mass spectrometric detection (GC-MS) method was developed and validated for simultaneously determining fipronil and its three major metabolites in vegetables, fruit and soil. The fipronil residues were extracted using QuEChERS technique with ethyl acetate and then were purified by dispersive solid phase extraction (d-SPE) cleanup for cabbage, cauliflower, okra, tomato, grapes and soil. The linearity of the analytical response across the studied range of concentrations (0.01–0.5?µg?mL^?1) was excellent, obtaining correlation coefficients higher than 0.999. The average recoveries of the pesticide from all matrixes ranged from 86 to 112%, for fortification levels of 0.01, 0.05 and 0.1?µg?g^?1. The precision values associated with the analytical method, expressed as RSD values, were less than 10.15% for the pesticide in all matrixes. This method can be used to evaluate environmental residues and the safety of agricultural products.     

Simultaneous determination of caffeic acid and its major pharmacologically active metabolites in rat plasma by LC‐MS/MS and its application in pharmacokinetic study

A simple, sensitive and selective high‐performance liquid chromatography electrospray ionization tandem mass spectrometry (LC‐MS/MS) method was developed for simultaneous determination and pharmacokinetic study of caffeic acid (CA) and its active metabolites. The separation with isocratic elution used a mobile phase composed of methanol and water (containing 0.1% formic acid) at a flow rate of 0.2 mL/min. The detection of target compounds was done in selected reaction monitoring (SRM) mode. The SRM detection was operated in the negative electrospray ionization mode using the transitions m/z 179 ([M ? H]^?) → 135 for CA, m/z 193 ([M ? H]^?) → 134.8 for ferulic acid and isoferulic acid and m/z 153 ([M ? H]^?) → 108 for protocatechuic acid. The method was linear for all analytes over the investigated range with all correlation coefficients 0.9931. The lower limits of quantification were 5.0 ng/mL for analytes. The intra‐ and inter‐day precisions (relative standard deviation) were <5.86 and <6.52%, and accuracy (relative error) was between ?5.95 and 0.35% (n = 6). The developed method was applied to study the pharmacokinetics of CA and its major active metabolites in rat plasma after oral and intravenous administration of CA. Copyright © 2014 John Wiley & Sons, Ltd.     

A comprehensive gas chromatography coupled to high resolution mass spectrometry based method for the determination of polybrominated diphenyl ethers and their hydroxylated and methoxylated metabolites in environmental samples

We report here an efficient and comprehensive analytical methodology based on gas chromatography with high resolution mass spectrometry (GC–HRMS) to simultaneously determine PBDEs from mono to deca brominated and hydroxy (OH-) and methoxy (MeO-) PBDE metabolites in environmental samples, particularly, sediment, fish tissue and milk. Among a number of extraction and clean-up methods tested, pressurized liquid extraction followed by gel permeation chromatography and florisil clean-up proved to be simple, robust and optimized so that all target analytes (parent compounds and metabolites) were collected in a single fraction. Extracts were analyzed by GC–HRMS to identify PBDEs. Following, the same extracts were derivatized and re-analyzed by GC–HRMS to determine 11 target and 35 non-target OH- and MeO-PBDEs. Monitoring of the M⁺ for MeO-PBDEs and the [M−CH₂CO]⁺ ions for derivatized OH-PBDEs at 10,000 resolution permitted unequivocal identification of the PBDE metabolites in the environmental matrices examined. The method was validated in terms of accuracy, precision, detection limits and long-term stability. The analytical precision obtained with this method was between 0.3 and 17%, and the limits of quantification were lower than 3.28 pg/g dry weight, 20.5 and 41.4 pg/g lipid weight in sediment, milk and fish, respectively. The method was applied to determine PBDEs and target and non-target metabolites in all three matrices.     

Determination of zinc in marine/lacustrine sediments by graphite furnace atomic absorption spectrometry using Pd/Mg chemical modifier and slurry sampling

Effectiveness of Pd/Mg chemical modifier for the accurate direct determination of zinc in marine/lacustrine sediments by graphite furnace atomic absorption spectrometry (GF-AAS) using slurry samples was evaluated. A calibration curve prepared by aqueous zinc standard solution with addition of Pd/Mg chemical modifier is used to determine the zinc concentration in the sediment. The accuracy of the proposed method was confirmed using Certified Reference Materials, NMIJ CRM 7303-a (lacustrine sediment) from National Metrology Institute of Japan, National Institute of Advanced Industrial Science and Technology, Japan, and MESS-3 (marine sediment) and PACS-2 (marine sediment) from National Research Council, Canada. The analytical results obtained by employing Pd/Mg modifier are in good agreement with the certified values of all the reference sediment materials. Although for NRC MESS-3 an accurate determination of zinc is achieved even without the chemical modifier, the use of Pd/Mg chemical modifier is recommended as it leads to establishment of a reliable and accurate direct analytical method. One quantitative analysis takes less than 15 minutes after we obtain dried sediment samples, which is several tens of times faster than conventional analytical methods using acid digested sample solutions. The detection limits are 0.13?µg?g^?1 (213.9?nm) and 16?µg?g^?1 (307.6?nm), respectively, in sediment samples, when 40?mg of dried powdered samples are suspended in 20?mL of 0.1?mol?L^?1 nitric acid and a 10?µl portion of the slurry sample is measured. The precision of the proposed method is 8–15% (RSD).     

Ultra-trace determination of aquaculture chemotherapeutants and degradation products in environmental matrices by LC-MS/MS

Two of the most common products currently used to control parasitic sea lice in fin fish aquaculture, salmon in particular, are Slice® and AlphaMax®. Emamectin benzoate (EB) is the active ingredient in Slice® and deltamethrin is the active ingredient in AlphaMax®. Several analytical methods have been developed for the determination of the active ingredients in these products but these have been focused on specific matrices and lack the sensitivity and versatility required in environmental monitoring. Here we present a validated, versatile, and simple analytical method for the determination of EB, its desmethyl degradation product (AB), and deltamethrin in a wide range of environmental matrices (sea water, marine sediment, and tissue). Sediments and tissues were extracted by accelerated solvent extraction (ASE®) and sample cleanup was achieved by solid phase extraction (SPE) while sea water was extracted using SPE disks. Analyte identification and quantification was based on liquid chromatography tandem mass spectrometry (LC-MS/MS) instrumentation with electrospray ionization, and multiple reaction monitoring (MRM). Method detection limits for the target analytes was in the parts per trillion (pg?g^?1) level for tissue and sediment and parts per quadrillion (pg?L^?1) for water. Except for deltamethrin in sea water, method performance in terms of analyte recoveries was better than 60%, and the method precision was RSD<20%. The method was used to determine EB and AB concentrations in water, sediment and prawn tissue samples collected near salmon aquaculture sites treated with Slice®. A distinct concentration gradient was observed in the immediate vicinity (within 50 to 100?m radius) of the salmon aquaculture sites where EB was detected at low ng?g^?1 levels for tissue (EB ranged from 0.041 to 3.0?ng?g^?1) and sediment (EB ranged from 0.051 to 35?ng?g^?1) and pg?L^?1 levels (EB ranged from 3 to 209?pg?L^?1) for water samples.     

Determination of terbinafine in pharmaceuticals and dialyzates by capillary electrophoresis

A capillary electrophoresis method has been developed for the separation and determination of terbinafine (TER) in various pharmaceutically relevant matrices. Capillary zone electrophoresis (CZE) separation and UV absorbance photometric detection were carried out in a 160 mm capillary tube with a 300 μm i.d., hydrodynamically (membrane) closed. The influences of pH, carrier cation and counterion on migration parameters of TER were studied and the following conditions were selected: a 20 mmol l⁻¹ glycine running buffer adjusted to pH 2.7 with acetic acid, 0.2% (w/v) methylhydroxyethylcellulose (m-HEC) as an electro-osmotic flow (EOF) suppressor, a 250 μA driving current, and 20 °C. The optimized separation conditions were convenient for the determination of TER in commercial tablets and spray and in dialyzates. Here, the dialysis was used to investigate in vitro permeation of TER through the skin from the gel. The samples of dialyzates were examined with and without simple extraction procedure and the results were compared. A permeation profile of the drug present in the gel of given composition was obtained analyzing pretreated samples. The proposed electrophoretic method was successfully validated. It was suitable for the simple, sensitive, rapid and highly reproducible assay of TER. CZE analysis was completed within 5.5 min. The detection limit of TER was 1.73 μmol l⁻¹ at a 224 nm detection wavelength. The intra- and inter-laboratory precisions over the concentration range 6.0-60.0 μmol l⁻¹ were between 0.32-0.69% and 1.04-1.44% including R.S.D. of migration times and peak areas, respectively. The mean absolute recoveries of drugs from samples were found to be 98.34 (tablets) and 99.47% (spray). It is suggested that there are potentialities to determine TER present in unpretreated complex samples, as CZE in a hydrodynamically closed separation system may be easily on-line combinable with purification and preconcentration CE modes (e.g., isotachophoresis, ITP).     

Quantitative Speciation of Arsenic in Water and Sediment Samples from the Mokolo River in Limpopo Province,South Africa

The Mokolo River is disposed to environmental contaminants such as arsenic (As) due to its proximity to several anthropogenic activities. Speciation of As in water and sediment samples from Mokolo River is crucial to evaluate the level and distribution of As in the river and underlying sediment since toxicity depends on its chemical forms. In this study, As species in water and sediment were determined by developing a new method for sediment extraction. Effective microwave-assisted extraction of As species in sediment samples was achieved using 0.3?M (NH₄)₂HPO₄ and 50?mM EDTA, which showed no species interconversion during extraction. The chromatographic separation and detection of As(III), dimethylarsinic acid (DMA), monomethylarsonic acid, and As(V) in water and sediment samples were achieved by coupling to high-performance liquid chromatography to inductively coupled plasma mass spectrometry. Baseline separation of four As species was achieved in 12?min using gradient elution with 10 and 60?mM NH₄NO₃ at pH 8.7 as the mobile phase. The analytical figures of merit and validation of analytical procedures were assessed and adequate performance and percentage recoveries ranging from 81.1 to 102% for water samples and 73.0–92.0% for sediments were achieved. The As species concentration in water and sediment samples was found to be in the range of 0.304–4.99?µg?L^?1 and 74.0–92.0?ng?g^?1, respectively. DMA was not detected in both water and sediment samples.     

Analysis of 11-nor-Δ(9) -tetrahydrocannabinol-9-carboxylic acid and its glucuronide in urine by capillary electrophoresis/mass spectrometry

Δ⁹‐Tetrahydrocannabinol is the primary psychoactive component in cannabis, one of the most commonly used illicit drugs in the world. This paper describes a simple and rapid method for direct analysis of major metabolites of Δ⁹‐tetrahydrocannabinol; 11‐nor‐Δ⁹‐tetrahydrocannabinol‐9‐carboxylic acid and its glucuronide in urine by capillary electrophoresis/mass spectrometry. The only pretreatment needed for a urine sample was dilution with methanol containing an internal standard and centrifugation. Electrophoresis was carried out in an untreated fused‐silica capillary (50 µm i.d. × 85 cm) filled with 40 m m ammonium formate (pH 6.4). An analysis could be completed within 10 min. For both compounds, the assay was linear over the range 0.1 ? 10 µg/mL in urine with correlation coefficients (r²) > 0.99 and the limit of detection was 0.5 pg (10 nL injection). The detection yields and reproducibilities were determined at three different concentrations (0.1, 0.5 and 2 µg/mL in urine). The mean detection yields were 60 ? 99%. The intra‐ and inter‐day relative standard deviations of migration times were 0.063 ? 0.19 and 0.18 ? 0.36%, and those of peak areas were 4.2 ? 18 and 5.9 ? 25%, respectively. The proposed method successfully analyzed the urine samples of cannabis users. Copyright © 2012 John Wiley & Sons, Ltd.     

Rapid residue analysis of oxathiapiprolin and its metabolites in typical Chinese soil,water, and sediments by a modified quick,easy, cheap,effective, rugged,and safe method with ultra high performance liquid chromatography and tandem mass spectrometry

A sensitive and effective method for the simultaneous determination of residues from a new fungicide, oxathiapiprolin, and its metabolites (IN‐E8S72 and IN‐WR791) in soil, water, and sediment, was developed using ultra high performance liquid chromatography with tandem mass spectrometry. Three compounds were extracted from water, soil, and sediment by using acetonitrile and different proportions of formic acid aqueous solution (1% v/v for water; 2% v/v for soil; and sediment), and were cleaned with octadecylsilane. The target compounds were determined within 5 min using an electrospray ionization source in the positive mode for oxathiapiprolin and in the negative mode for the two metabolites. The limits of quantification for all the three compounds were 0.1 μg/kg in water and 1 μg/kg in soil and sediment. Recovery studies were performed using three spiked levels (0.1, 1, and 10 μg/kg for water; 1, 10, and 50 μg/kg for soil and sediment). The overall average recoveries ranged from 64.8 to 112.7% with all intra‐ and interday relative standard deviation values below 19.4 and 19.1%, respectively. The method validation confirmed that the proposed method was convenient and reliable for determining residual oxathiapiprolin and its metabolites in soil, water, and sediments.     

High-Performance Liquid Chromatographic Assay for Chlorquine and its Two Major Metabolites,Desethylchloroquine and Bidesethylchloroquine in Biological Fluids

Abstract

A high-performance liquid chromatography (HPLC) method for the determination of chloroquine and its two major metabolites in biological fluids is described. Hydroxychloroquine is used as an internal standard (I.S.). Drug, metabolites and I.S. were extracted as bases with diethyl ether by a single step procedure. After drying and evaporation of the organic phase, the residue was dissolved into the mobile phase and injected into the chromatographic system. Separation was performed using a normal phase column (Inertsil sill with mixture of acetonitrile, methanol and ammonia as mobile phase. The detection was carried out by fluorescence measurement : excitation wavelength was set at 325 nm and emission at 380 nm. The limit of detection was near 3.7 ng ml^?1 for chloroquine and metabolites. No chromatographic interference could be detected by endogenous compounds or other antimalarial drugs. Because of the good accuracy of the method, concentrations were determinated with a relative standard deviation lower than 7% at the 25 ng ml^?l level for all substances.

An excellent precision was obtained over the range of concentrations tested, 25–1000ng ml^?l. This method can be applied to therapeutic, pharmacokinetic and epidemial studies.     

Simultaneous Determination of Flonicamid and its Metabolites in Tea by Liquid Chromatography–Tandem Mass Spectrometry

An analytical method was established to simultaneously quantify flonicamid and its metabolites 4-trifluoromethylnicotinic acid (TFNA), N-(4-trifluoromethylnicotinoyl) glycine (TFNG), and 4-trifluoromethylnicotinamide (TFNA-AM) in tea using orthogonal experimental design and liquid chromatography–tandem mass spectrometry (LC–MS/MS). Residues were extracted from the samples with acetonitrile containing 1% acetic acid and were purified with graphitized carbon black. The linearity of the method was excellent in the concentration range of 0.01–10?µg/mL, producing correlation coefficients greater than 0.996 for the target compounds. The limits of detection and quantification of all analytes in tea were 0.0013–0.013?mg/kg and 0.004–0.040?mg/kg, respectively. The average recoveries of flonicamid, TFNA, TFNG, and TFNA-AM ranged from 75.14 to 92.72%, with intra- and interday relative standard deviations of 1.07–9.75%. The proposed method was successfully applied to the terminal residue determination of flonicamid and its metabolites in dry tea processed from three field trials’ fresh samples. The determined total terminal residue concentrations of flonicamid 10?days after the last application at all three sites were below the maximum residue limit (MRL) set by the European Union (0.1?mg/kg) and the residues in all samples were lower than the MRL established by the United States Environmental Protection Agency (EPA) (8?mg/kg). This method may be used to meet the requirements for the determination of flonicamid and its metabolites that could provide guidance for establishing a MRL for flonicamid in tea in China.     

Simultaneous determination of cyromazine,melamine and their biodegradation products by ion-pair high-performance liquid chromatography

An ion-pair high-performance liquid chromatography with ultraviolet detection method for the determination of cyromazine, melamine and its biodegradation products (ammeline, ammelide, cyanuric acid and biuret) was developed. C18 column was utilised to separate the six analytes with a mobile phase consisting of perchloric acid-ammonia solution and acetonitrile, under gradient elution and variable flow rate. The detection wavelengths were 205 nm for cyanuric acid and biuret and 222 nm for cyromazine, melamine, ammeline and ammelide. For analysis of sediment samples, the extraction solution containing acetonitrile, ammonia and water (80:10:10 by volume) was used to extract the analytes from sediment matrix. Using the extraction method for the spiked sediment sample, high linearity of matrix-matched standard curve could be obtained for the six analytes. The method detection limit was 0.1 μg g^?1 for melamine and cyromazine, 0.2 μg g^?1 for ammeline and ammelide, 1.2 μg g^?1 for cyanuric acid and 1.0 μg g^?1 for biuret in sediment matrix. The recoveries of these compounds were 70.1–98.3% and the relative standard deviations were 0.5–4.4%. Finally, the proposed method was successfully applied to the analysis of the sediment sample near the wastewater outlet of a melamine-producing factory.     

Simultaneous determination of NNK and its metabolites in mouse tissue for evaluating the effects of chronic alcohol consumption on the metabolism of NNK in mouse liver and lung

A hydrophilic-interaction liquid chromatography–tandem mass spectrometry (HILIC–MS–MS) method was developed for the determination of 4-(methylnitrosamino)-1-(3-pyridyl)-1-butanone (NNK) and its metabolites in mouse liver and lung. The limits of detection of all analytes were in the range 0.017–0.057 ng mL^?1, and recovery ranged from 88.4–119.8 % with intra and inter-day precision in the range 0.89–6.03 % and 1.01–6.97 %, respectively. This simple and accurate method was used to evaluate the effect of chronic alcohol consumption on NNK bioactivation in mouse tissue. Time-course curves for NNK and its metabolites were generated, and the areas under the curves (AUCs) were compared. It was found that target tissues of NNK carcinogenesis in C57BL/6 mice contained high levels of α-hydroxylation metabolites of NNK and its carbonyl reduction metabolite, 4-(methylnitrosamino)-1-(3-pyridyl)-1-butanol (NNAL). The most pronounced effect of alcohol was to enhance α-hydroxylation of NNK in mouse lung and liver, which suggests that chronic alcohol consumption may increase the risk of carcinogenicity associated with NNK in mice.

High-performance liquid chromatographic method for the simultaneous determination of cyclosporine A and its four major metabolites in whole blood

This study aimed to develop a simple and efficient optimized high-performance liquid chromatograph (HPLC) method for simultaneous determination of cyclosporine A (CyA) and its major, partly active metabolites AM1, AM9, AM4N, and AM19 in whole blood from transplant patients using cyclosporine D (CyD) as internal standard. The method used a CN analytical column maintained at 60 °C with hexan-isopropanol (93:7, v/v) as mobile phase; detection was at 212 nm. Linearity for all five compounds was tested in the range of 31-1500 ng ml⁻¹ for CyA and of 31-1000 ng ml⁻¹ for metabolites. The limit of detection was found to be 15 ng ml⁻¹ for all compounds.This modified, inexpensive method is also suitable for measuring cyclosporine A and metabolite concentrations in routine monitoring of patients undergoing treatment with CyA.     

Direct high-performance liquid chromatography enantioseparation of terazosin on an immobilised polysaccharide-based chiral stationary phase under polar organic and reversed-phase conditions

High-performance liquid chromatography (HPLC) enantioseparation of terazosin (TER) was accomplished on the immobilised-type Chiralpak IC chiral stationary phase (CSP) under both polar organic and reversed-phase modes. A simple analytical method was validated using a mixture of methanol–water–DEA 95:5:0.1 (v/v/v) as a mobile phase. Under reversed-phase conditions good linearities were obtained over the concentration range 8.76–26.28 μg mL⁻¹ for both enantiomers. The limits of detection and quantification were 10 and 30 ng mL⁻¹, respectively. The intra- and inter-day assay precision was less than 1.66% (RSD%). The optimised conditions also allowed to resolve chiral and achiral impurities from the enantiomers of TER. The proposed HPLC method supports pharmacological studies on the biological effects of the both forms of TER and analytical investigations of potential drug formulations based on a single enantiomer. At the semipreparative scale, 5.3 mg of racemic sample were resolved with elution times less than 12 min using a mobile phase consisting of methanol–DEA 100:0.1 (v/v) and both enantiomers were isolated with a purity of ≥99% enantiomeric excess (ee). The absolute configuration of TER enantiomers was assigned by comparison of the measured specific rotations with those reported in the literature.     

Determination of synthetic musks in the sediment of the Taihu lake by using accelerated solvent extraction (ASE) and GC/MS

Synthetic musks, substitutes for natural musks, are widely distributed in environment. They have been detected in water, sludge, fish, shrimp, mussels and other aquatic animals, and even in human's adipose tissue, blood and breast milk. In this study, a new extraction procedure, based on the accelerated solvent extraction (ASE) and in cell clean-up technique was developed and successfully coupled with gas chromatography-mass spectrometry (GC/MS) for the analysis of musks in sediment samples. With this method, the limits of detection as low as 0.03–0.05?ng?g^?1 and the recovery rate of 86.0%–104% are achieved. When compared with soxhlet extraction (SE) and ultrasonic extraction (USE), ASE not only has the best extraction efficiency but also has advantage in extraction time and solvent consumption. Eight synthetic musks, including six polycyclic musks (Tonalide (AHTN), Galaxolide (HHCB), Phantolide (AHDI), Traseolide (ATII), Cashmeran (DPMI) and Celestolide (ADBI)) and two nitro musks (musk xylene (MX) and musk ketone (MK)), were evaluated in sediment samples collected from 15 selected locations of the Taihu lake, one of the largest freshwater lakes in China. The contents of synthetic musks in sediment samples range from 0.336 to 3.10?ng?g^?1 for HHCB, 0.184 to 1.21?ng?g^?1 for AHTN, below detection limit (BDL) to 0.349?ng?g^?1 for MX, and BDL to 0.0786?ng?g^?1 for MK. The contents of DPMI, ADBI, AHMI and ATII are below detection limit in all samples. The results reflect current status of fragrance compound pollution in this area, and provide basic data for environmental policy making.     

Determination of antifouling pesticides and their degradation products in marine sediments by means of ultrasonic extraction and HPLC–APCI–MS

A method has been developed for the simultaneous determination of antifouling pesticides and some of their degradation products, e.g. dichlofluanid, diuron, demethyldiuron, 1-(3,4-dichlorophenyl)urea, sea-nine, Irgarol 1051 and one of its metabolites (2-methylthio-4-tert-butylamino-s-triazine) in marine sediments. The determination of these compounds in sediment samples was performed by means of methanolic ultrasonic extraction then clean-up on an Isolute ENV+ solid phase extraction (SPE) cartridge. The resulting extract was then analyzed by reversed-phase high-performance liquid chromatography coupled with atmospheric-pressure chemical-ionization mass spectrometry in negative and positive ion modes (HPLC–APCI–MS). Recovery ranged from 54–109% for the antifouling agents and their degradation products. The determination limits for the different compounds varied between 0.2 and 1.6 μg kg^–1 dry sediment. The analytical procedure was successfully applied to the determination of these pesticides and their degradation products in marine sediment samples from different marinas of the Catalan coast. The compounds detected were: diuron, dichlofluanid, demethyldiuron, sea-nine, and Irgarol 1051. The highest concentrations were those of diuron and Irgarol 1051 – 136 and 88 μg kg^–1, respectively.     

Development of a green stability-indicating HPLC–DAD method for the determination of donepezil hydrochloride in the presence of its related substance and degradation products

A simple, eco-friendly, stability-indicating HPLC method was developed for the determination of donepezil hydrochloride (DH) in tablet dosage form in the presence of its pharmacopoeia-related compound (donepezil-related compound A) and its different degradation products. The chromatographic conditions were optimized to achieve the highest performance parameters using Zorbax Eclipse Plus C18 rapid resolution column (4.6?×?100?mm, 3.5?µm), with a mobile phase composed of 72.5% acetate buffer pH 5.5 and 27.5% ethanol, flowing at 1?mL?min^?1. The diode array detector (DAD) was set at 315?nm and the column oven was adjusted at 45°C. Linear response (r?=?0.9999) was observed over the range of 2–28?µg?mL^?1 of donepezil, with detection and quantitation limits of 0.031 and 0.103?µg?mL^?1, respectively. Forced degradation studies were performed on standard DH and test Demepezil® 5-mg tablets under various conditions and the method was found to be stability indicating. The purity of DH peak was confirmed using the DAD. In the developed method, two principles of green chromatography were adopted (reduce and replace) by reducing solvent consumption through the utilization of a short column (10?cm) with a smaller particle size (3.5?µm) instead of a normal 25?cm with a 5?µm particle size and by replacing hazardous solvents of the official United States Pharmacopoeia method as acetonitrile with ethanol. Furthermore, the greenness of the method was assessed using three assessment tools.