Separation and Determination of Amitriptyline and Nortriptyline in Biological Samples Using Single-Drop Microextraction with GC

The combination of liquid phase microextraction (LPME) based on a single drop and gas chromatography flame ionization detector (GC-FID) was used for separation and determination of amitriptyline and nortriptyline in human plasma and urine samples. The sample solution was kept alkaline (pH 12), then a microdrop of organic solvent (isooctane) was suspended in the donor solution; after extraction, the organic microdrop was injected into the GC-FID. Experimental LPME conditions were optimized. Finally, the enrichment factors (89.5?C139.0), the relative standard deviation (RSD%, n = 5) 1.1?C8.5, linearity ranges (0.05?C20 ??g mL^?1), and the limits of detections (0.01, 0.02 ??g mL^?1) for selected drugs were evaluated.     

Dispersive liquid–liquid microextraction combined with high performance liquid chromatography-DAD detection for the determination of sulfonylurea herbicides in water samples

A new method for the determination of four sulfonylurea herbicides (metsulfuron-methyl, chlorsulfuron, bensulfuron-methyl and chlorimuron-ethyl) in water samples was developed by dispersive liquid–liquid microextraction coupled with high performance liquid chromatography-diode array detector. Parameters that affect the extraction efficiency, such as the kind and volume of the extraction and disperser solvent, extraction time and salt addition, were investigated and optimised. Under the optimum conditions, the enrichment factors were in the range between 102 and 216. The linearity of the method was obtained in the range of 1.0–100 ng mL^?1 with the correlation coefficients (r) ranging from 0.9982 to 0.9995. The method detection limits were 0.2–0.3 ng mL^?1. The proposed method has been successfully applied to the analysis of target sulfonylurea herbicides in river, stream and well water samples with satisfactory results.     

Comparison of efficiencies between single-drop microextraction and continuous-flow microextraction for the determination of methomyl in natural waters

Two liquid-phase microextraction (LPME) approaches, static direct-immersed single-drop microextraction (DI-SDME) and continuous-flow microextraction (CFME), were used to extract methomyl in water samples and their respective extraction efficiencies were compared. Several important parameters affecting extraction efficiency such as the type of extraction solvent, solvent drop volume, stirring speed or flow rate, extraction time and salt concentration were optimised. The optimised conditions were as follows: 3.0-µL tetrachloroethane (C₂H₂Cl₄) as the extraction solvent, 15% NaCl (w/v), 15 min extraction time and stirring speed at 600 rpm for DI-SDME; 3.5-µL C₂H₂Cl₄ as the extraction solvent, 15% NaCl (w/v), 21 min extraction time and flowing rate at 0.8 mL min^?1 for CFME. Under the previous optimal conditions, the linear range, detection limit (S/N = 3) and precision (RSD, n = 6) were 5.0-5000 ng mL^?1, 1.5 ng mL^?1, 6.9% for DI-SDME, and 4.0–10000 ng mL^?1, 2.5 ng mL^?1, 4.6% for CFME, respectively. Lake and river water samples were successfully analysed by DI-SDME and CFME. The result demonstrated that both SDME and CFME techniques are simple, low cost and amity to environment. As a result, the two approaches have tremendous potential in trace analysis of methomyl in natural waters.     

Structure and formation of gaseous [C4H6O]+˙ ions: 1—The enolic ions [CH2C(OH)?CHCH2]+˙ and [CH2CH?CHCH(OH)]+˙ and their relationship with their keto counterparts

The [C₄H₆O]^+˙ ion of structure [CH₂?CHCH?CHOH]^+˙ (a) is generated by loss of C₄H₈ from ionized 6,6-dimethyl-2-cyclohexen-1-ol. The heat of formation ΔH_f of [CH₂?CHCH?CHOH]^+˙ was estimated to be 736 kJ mol^?1. The isomeric ion [CH₂?C(OH)CH?CH₂]^+˙ (b) was shown to have ΔH_f, ? 761 kJ mol^?1, 54 kJ mol^?1 less than that of its keto analogue [CH₃COCH?CH₂]^+˙. Ion [CH₂?C(OH)CH?CH₂]^+˙ may be generated by loss of C₂H₄ from ionized hex-1-en-3-one or by loss of C₄H₈ from ionized 4,4-dimethyl-2-cyclohexen-1-ol. The [C₄H₆O]^+˙ ion generated by loss of C₂H₄ from ionized 2-cyclohexen-1-ol was shown to consist of a mixture of the above enol ions by comparing the metastable ion and collisional activation mass spectra of [CH₂?CHCH?CHOH]^+˙ and [CH₂?C(OH)CH?CH₂]^+˙ ions with that of the above daughter ion. It is further concluded that prior to their major fragmentations by loss of CH₃˙ and CO, [CH₂?CHCH?CHOH]⁺˙ and [CH₂?C(OH)CH?CH₂]^+˙ do not rearrange to their keto counterparts. The metastable ion and collisional activation characteristics of the isomeric allenic [C₄H₆O]^+˙ ion [CH₂?C?CHCH₂OH]^+˙ are also reported.     

Determination of phenolic compounds in water samples by HPLC following ionic liquid dispersive liquid-liquid microextraction and cold-induced aggregation

We report on the determination of bisphenol A and 2-naphthol in water samples using ionic liquid cold-induced aggregation dispersive liquid-liquid microextraction combined with HPLC. Parameters governing the extraction efficiency (disperser solvent, volume of extraction and disperser solvent, pH, temperature, extraction time) were optimized and resulted in enrichment factors of 112 for bisphenol A and of 186 for 2-naphthol. The calibration curve was linear with correlation coefficients of 0.9995 and 0.9998, respectively, in the concentration range from 1.5 to 200?ng?mL^?1. The relative standard deviations are 2.3% and 4.1% (for n?=?5), the limits of detection are 0.58 and 0.86?ng?mL^?1, and relative recoveries in tap, lake and river water samples range between 100.1 and 108.1%, 99.4 and 106.2%, and 97.1 and 103.8%, respectively.

Controlled Aggregation of Multiple Guanidinium Ions through a Hydrogen‐Bonded Network Assembly with Deprotonated Forms of Kemp’s Triacid

A series of five complexes that incorporate the guanidinium ion and various deprotonated forms of Kemp’s triacid (H₃KTA) have been synthesized and characterized by single‐crystal X‐ray analysis. The complex [C(NH₂)₃⁺] ? [H₂KTA^?] ( 1 ) exhibits a sinusoidal layer structure with a centrosymmetric pseudo‐rosette motif composed of two ion pairs. The fully deprotonated Kemp’s triacid moiety in 3 [C(NH₂)₃⁺] ? [KTA^3?] ( 2 ) forms a record number of eighteen acceptor hydrogen bonds, thus leading to a closely knit three‐dimensional network. The KTA^3? anion adopts an uncommon twist conformation in [(CH₃)₄N⁺] ? 2 [C(NH₂)₃⁺] ? [KTA^3?] ? 2 H₂O ( 3 ). The crystal structure of [(nC₃H₇)₄N⁺] ? 2 [C(NH₂)₃⁺] ? [KTA^3?] ( 4 ) features a tetrahedral aggregate of four guanidinium ions stabilized by an outer shell that comprises six equatorial carboxylate groups that belong to separate [KTA^3?] anions. In 3 [(C₂H₅)₄N⁺] ? 20 [C(NH₂)₃⁺] ? 11 [HKTA^2?] ? [H₂KTA^?] ? 17 H₂O ( 5 ), an even larger centrosymmetric inner core composed of eight guanidinium ions and six bridging water molecules is enclosed by a crust composed of eighteen axial carboxyl/carboxylate groups from six HKTA^2? anions.     

Simultaneous determination of carbazole-based explosives in environmental waters by dispersive liquid—liquid microextraction coupled to HPLC with UV-Vis detection

Dispersive liquid-liquid microextraction as a rapid, simple and efficient method coupled with high performance liquid chromatography-UV-Vis detection was used for sample preparation and subsequent determination of carbazole, tri nitro carbazole (TrNC) and tetra nitro carbazole in water samples. The influence of several important variables on the extraction efficiency has been evaluated. The methods works best with chloroform as an extractant and acetonitrile as the dispersive solvent. Under optimum conditions, the calibration curve is linear in the range from 0.007 to 1.75?μg?mL^?1 for TNC, 0.006 to 1.52?μg?mL^?1 for TrNC, and 0.008–2.10?μg?mL^?1 for carbazole. The limits of detection (LODs; at a signal-to-noise ratio of 3), range from 1.7 to 1.1?ng?mL^?1, for TNC, TrNC and carbazole. Also, the relative standard deviations (RSD, n?=?6) for the extraction of TNC (at 174?ng?mL^?1), TrNC (at 151?ng?mL^?1) and carbazole (at 84?ng?mL^?1) vary between 4.1 and 5.2%. The enrichment factors range from 179 to 186. The method was successfully applied to the determination of TNC, TrNC and carbazole in environmental samples.

Solid phase extraction of trace amounts of silver (I) using dithizone-immobilized alumina-coated magnetite nanoparticles prior to determination by flame atomic absorption spectrometry

A new, simple, fast and reliable solid-phase extraction (SPE) method has been developed to separation/preconcentration of trace amounts of silver ion from environmental water samples using dithizone/sodium dodecyl sulfate immobilized on alumina-coated magnetite nanoparticles (DTZ/SDS-ACMNPs) and its determination by flame atomic absorption spectrometry. The coating of alumina on Fe₃O₄ NPs not only avoids the dissolving of Fe₃O₄ NPs in acidic solution, but also extends their application without sacrificing their unique magnetization characteristics. This method avoided the time-consuming column-passing process of loading large volume samples in traditional SPE through the rapid isolation of DTZ/SDS-ACMNPs with an adscititious magnet. Optimal experimental conditions including amount of DTZ/SDS, pH value, standing time, sample volume, type, volume and concentration of eluent and co-existing ions have been studied and established. Under the optimal experimental conditions, the detection limit for Ag(I) with enrichment factors of 100 was found to be 0.52?ng?mL^?1 and its relative standard deviations (RSD) was 3.4% (n?=?10, C?=?5.0?µg?mL^?1). The linear range of calibration curve for Ag(I) was 2–5000?ng?mL^?1 with a correlation coefficient of 0.9991. The proposed method was successfully applied to the determination of target analyte in different water and wastewater samples. The validity of the method has been checked by applying it to study the recovery of silver ion in spiked water and wastewater samples.     

Kinetics of Stripping Ni(II) from the Ni‐BTMPPA Complex/BTMPPA/Kerosene System by Sulfate‐Acetato Solution

The kinetics of stripping of Ni²⁺ from a Ni‐BTMPPA complex, dissolved in a kerosene solution of BTMPPA (H₂A₂, Cyanex 272), by acidic sulfate‐acetato solution, was studied using the single (falling) drop technique and flux (F) method of data treatment. The empirical flux equation at 303 K is F_b (kmol/m²s) = 10^?4.35 [Ni²⁺] (1+10^?3.42 [H⁺]^?1)^?1 ([H₂A₂]_(o)^0.5+2.50 [H₂A₂]_(o))^?1 (1+6[SO₄^2?]) (1+3.20 [Ac^?]). Activation energy (E_a), entropy change in activation (ΔS^±), and enthalpy change in activation (ΔH^±) were measured under different experimental conditions. Based on the empirical flux equation, E_a and ΔS^±, the mechanism of Ni²⁺ stripping is provided. In a low [H⁺] region, the stripping reaction steps appear as [NiA⁺] → Ni²⁺ + A^? and [Ni(HA₂)₂]_(int) → [NiHA₂]⁺_(int) + HA_2(int)^? in lower and higher concentration regions of free BTMPPA, respectively, provided [SO₄^2?] and [Ac^?] are kept low. However, at higher [H⁺] concentrations, the stripping is under diffusion control. With increasing [SO₄^2?] and [Ac^?], the enhancement of the rate is attributed to the attack of the Ni(II) complex by SO₄^2? or HSO₄^? and Ac^? to form NiSO₄ or NiHSO₄⁺ and NiAc⁺ complexes. Negative ΔS^± values indicate that the rate‐determining stripping reaction steps occur via an substitution nucleophilic, bimolecular (S_N2) mechanism.     

Photoionization of the C-1?C-4 monosubstituted alkyl benzenes: Thermochemistry of [C7H7]+ and [C8H9]+ formation

The appearance energies for the [C₇H₇]⁺ and [C₈H₉]⁺ fragment ions produced in the fragmentation of the C-1? C-4 monosubstituted alkyl benzenes have been measured by photon impact. The mean heat of formation calculated for [C₇H₇]⁺ is 205.3 ± 1.9 kcal mol^?1 which is consistent with a threshold tropylium structure. For [C₈H₉]⁺ the mean heat of formation is calculated to be 199.2 ± 1.3 kcal mol^?1 which can be equated with either a methyl tropylium or α-phenylethyl structure at threshold. Some evidence is provided for the existence of the α-phenylethyl ion.     

The [CH5NO]+ ˙ potential energy surface: Distonic ions,lon-dipole complexes and hydrogen-bridged radical cations

By combining results from a variety of mass spectrometric techniques (metastable ion, collisional activation, collision-induced dissociative ionization, neutralization-reionization spectrometry, ²H, ¹³C and ¹⁸O isotopic labelling and appearance energy measurements) and high-level ab initio molecular orbital calculations, the potential energy surface of the [CH₅NO]^{+ ˙} system has been explored. The calculations show that at least nine stable isomers exist. These include the conventional species [CH₃ONH₂]^{+ ˙} and [HO? CH₂? NH₂]^{+ ˙}, the distonic ions [O? CH₂? NH₃]^{+ ˙}, [O? NH₂? CH₃]^{+ ˙}, [CH₂? O(H)? NH₂]^{+ ˙}, [HO? NH₂? CH₂]^{+ ˙}, and the ion-dipole complex CH₂?NH₂⁺ …? OH˙. Surprisingly the distonic ion [CH₂? O? NH₃]^{+ ˙} was found not to be a stable species but to dissociate spontaneously to CH₂?O + NH₃^{+ ˙}. The most stable isomer is the hydrogen-bridged radical cation [H? C?O …? H …? NH₃]^{+ ˙} which is best viewed as an immonium cation interacting with the formyl dipole. The related species [CH₂?O …? H …? NH₂]^{+ ˙}, in which an ammonium radical cation interacts with the formaldehyde dipole is also a very stable ion. It is generated by loss of CO from ionized methyl carbamate, H₂N? C(?O)? OCH₃ and the proposed mechanism involves a 1,4-H shift followed by intramolecular ‘dictation’ and CO extrusion. The [CH₂?O …? H …? NH₂]^{+ ˙} product ions fragment exothermically, but via a barrier, to NH₄^{+ ˙} HCO^…? and to H₃N? C(H)?O^{+ ˙} H˙. Metastable ions [CH₃ONH₂]^+…? dissociate, via a large barrier, to CH₂?O + NH₃⁺ + and to [CH₂NH₂]⁺ + OH˙ but not to CH₂?O^{+ ˙} + NH₃. The former reaction proceeds via a 1,3-H shift after which dissociation takes place immediately. Loss of OH˙ proceeds formally via a 1,2-CH₃ shift to produce excited [O? NH₂? CH₃]^{+ ˙}, which rearranges to excited [HO? NH₂? CH₂]^{+ ˙} via a 1,3-H shift after which dissociation follows.     

Application of dispersive liquid–liquid microextraction and reversed phase-high performance liquid chromatography for the determination of two fungicides in environmental water samples

Dispersive liquid–liquid microextraction (DLLME) has been developed for the extraction and preconcentration of diethofencarb (DF) and pyrimethanil (PM) in environmental water. In the method, a suitable mixture of extraction solvent (50 µL carbon tetrachloride) and dispersive solvent (0.75 mL acetonitrile) are injected into the aqueous samples (5.00 mL) and the cloudy solution is observed. After centrifugation, the enriched analytes in the sediment phase were determined by HPLC-VWD. Different influencing factors, such as the kind and volume of extraction and dispersive solvent, extraction time and salt effect were investigated. Under the optimum conditions, the enrichment factors for DF and PM were both 108 and the limit of detection were 0.021 ng mL^?1 and 0.015 ng mL^?1, respectively. The linear ranges were 0.08–400 ng mL^?1 for DF and 0.04–200 ng mL^?1 for PM. The relative standard deviation (RSDs) were both almost at 6.0% (n = 6). The relative recoveries from samples of environmental water were from the range of 87.0 to 107.2%. Compared with other methods, DLLME is a very simple, rapid, sensitive (low limit of detection) and economical (only 5 mL volume of sample) method.     

Headspace Liquid-Phase Microextraction of Short-Chain Fatty Acids in Plasma, and Gas Chromatography with Flame Ionization Detection

A novel method for analysis of short-chain fatty acids (SCFA) in blood plasma has been developed by combining headspace liquid-phase microextraction (HS-LPME) and gas chromatography with flame ionization detection. HS-LPME conditions, for example working solution volume, salt concentration, and extraction temperature and time, were optimized by means of an L₉ (3⁴) orthogonal array design. The effects on extraction efficiency of the type of solvent and the volume of the microdrop, the pH of the sample matrix, and the stirring rate were examined. Under optimum conditions the linear calibration ranges for SCFA were from 0.08 to 80 µg mL^?1 (r ²>0.9921) with detection limits of 0.02 to 0.08 µg mL ^?1 and relative standard deviation less than 9.81%. Recovery from spiked blood plasma samples was more than 70.5%. The method was satisfactorily applied to analysis of SCFA in rat blood plasma samples from the blind-loop model.     

Effect of ammonium formate as ionizing additive in thermospray liquid chromatography-mass spectrometry for the determination of triazine,phenylurea and chlorinated phenoxyacetic acid herbicides

A comparison between the use of ammonium acetate and ammonium formate in thermospray liquid chromatography-mass spectrometry with positive and negative ion modes using ‘filament-on’ mode has been applied for the determination of simazine, atrazine, propazine, monuron, diuron, linuron, 2,4,-D, 2,4,5-T and silvex. By using ammonium formate, the positive ion mode showed for triazine and phenylurea herbicides [M + H]⁺ and [M + NH₄]⁺, respectively, and the formation of other adduct ions different from ammonium acetate. In the negative ion mode, chlorinated phenoxyacetic acid herbicides exhibited [M + acetate]^? or [M + formate]^?, depending on the ionizing additive. Applications are reported for the determination of triazine and chlorinated phenoxyacetic acid herbicides in spiked soil and water samples, respectively.     

Dispersive liquid-liquid microextraction of phenolic compounds using solidified floating organic droplets, and their determination by HPLC

We have developed a simple and efficient method for dispersive liquid-liquid microextraction of 4-nitrophenol, 2-naphthol and bisphenol A in real water samples. It is making use of solidified floating organic droplets of 1-dodecanol which has low density and a proper melting point. The type and volume of extraction solvent and dispersive solvent, the effect of salts, pH value and extraction time were optimized and resulted in enrichment factors of 84 for 4-nitrophenol, 123 for 2-naphthol, and 97 for bisphenol A. The limits of detection by HPLC are 1.50, 0.10 and 1.02 ng · mL^?1, respectively. Excellent linearity is observed in the concentration range from 10 to 800 ng · mL^?1, with coefficients of correlation ranging from 0.9988 to 0.9999. The relative standard deviations (for n?=?5) are from 3.2 to 5.3 %, and relative recoveries for the three phenols in tap, river and spring water range from 85.0 to 105.0 %, 98.3 to 110.0 %, and 98.6 to 109.0 %, respectively.

Chemical modification of alumina surface by immobilization of 1-((5-nitrofuran-2-yl)methylene)thiosemicarbazide for extractive concentration of silver ions

A column, solid phase extraction (SPE), preconcentration method was developed for determination of silver by using alumina coated with 1-((5-nitrofuran-2-yl)methylene)thiosemicarbazide and determination by flame atomic absorption spectrometry. The separation/preconcentration conditions for the quantitative recovery were investigated. At pH 2, the maximum sorption capacity of Ag⁺ was 7.5?mg?g^?1. The linearity was maintained in the concentration range of 0.02–11.0?µg?mL^?1 in the final solution or 0.14–1.10?×?10^4?ng?mL^?1 in the original solution for silver. The preconcentration factor of 140 and relative standard deviation of ±1.4% was obtained, under optimum conditions. The limit of detection (LOD) was calculated as 0.112?ng?mL^?1, based on 3σ_bl/m (n?=?8) in the original solutions. The proposed method was successfully applied to the determination trace amounts of silver in the environmental samples such as tea, rice and wheat flour, mint, and real water samples.     

Homo‐ and Heterodinuclear Ir and Rh Imine‐functionalized Protic NHC Complexes: Synthetic,Structural Studies,and Tautomerization/Metallotropism Insights

The influence of the potentially chelating imino group of imine‐functionalized Ir and Rh imidazole complexes on the formation of functionalized protic N‐heterocyclic carbene (pNHC) complexes by tautomerization/metallotropism sequences was investigated. Chloride abstraction in [Ir(cod)Cl{C₃H₃N₂(DippN=CMe)‐κN3}] ( 1 a ) (cod=1,5‐cyclooctadiene, Dipp=2,6‐diisopropylphenyl) with TlPF₆ gave [Ir(cod){C₃H₃N₂(DippN=CMe)‐κ²(C2,N_imine)}]⁺[PF₆]^? ( 3 a ⁺[PF₆]^?). Plausible mechanisms for the tautomerization of complex 1 a to 3 a ⁺[PF₆]^? involving C2?H bond activation either in 1 a or in [Ir(cod){C₃H₃N₂(DippN=CMe)‐κN3}₂]⁺[PF₆]^? ( 6 a ⁺[PF₆]^?) were postulated. Addition of PR₃ to complex 3 a ⁺[PF₆]^? afforded the eighteen‐valence‐electron complexes [Ir(cod)(PR₃){C₃H₃N₂(DippN=CMe)‐κ²(C2,N_imine)}]⁺[PF₆]^? ( 7 a ⁺[PF₆]^? (R=Ph) and 7 b ⁺[PF₆]^? (R=Me)). In contrast to Ir, chloride abstraction from [Rh(cod)Cl{C₃H₃N₂(DippN=CMe)‐κN3}] ( 1 b ) at room temperature afforded [Rh(cod){C₃H₃N₂(DippN=CMe)‐κN3}₂]⁺[PF₆]^? ( 6 b ⁺[PF₆]^?) and [Rh(cod){C₃H₃N₂(DippN=CMe)‐κ²(C2,N_imine)}]⁺[PF₆]^? ( 3 b ⁺[PF₆]^?) (minor); the reaction yielded exclusively the latter product in toluene at 110 °C. Double metallation of the azole ring (at both the C2 and the N3 atom) was also achieved: [Ir₂(cod)₂Cl{μ‐C₃H₂N₂(DippN=CMe)‐κ²(C2,N_imine),κN3}] ( 10 ) and the heterodinuclear complex [IrRh(cod)₂Cl{μ‐C₃H₂N₂(DippN=CMe)‐κ²(C2,N_imine),κN3}] ( 12 ) were fully characterized. The structures of complexes 1 b , 3 b ⁺[PF₆]^?, 6 a ⁺[PF₆]^?, 7 a ⁺[PF₆]^?, [Ir(cod){C₃HN₂(DippN=CMe)(DippN=CH)(Me)‐κ²(N3,N_imine)}]⁺[PF₆]^? ( 9 ⁺[PF₆]^?), 10? Et₂O ? toluene, [Ir₂(CO)₄Cl{μ‐C₃H₂N₂(DippN=CMe)‐κ²(C2,N_imine),κN3}] ( 11 ), and 12? 2 THF were determined by X‐ray diffraction.     

Ion–molecule reaction in the gas phase 3—nucleophilic substitution of 17ξ-R-5α,14β-androstane-14,17ξ-diols under [NH4]+ chemical ionization conditions1

Under Ammonia chemical Ionization conditions the source decompositions of [M + NH₄]⁺ ions formed from epimeric tertiary steroid alchols 14 OH_β, 17OH_α or 17 OH_β substituted at position 17 have been studied. They give rise to formation of [M + NH₄? H₂O]⁺ dentoed as [MH_sH]⁺, [M_sH? H₂O]⁺, [M_sH? NH₃]⁺ and [M_sH? NH₃? H₂O]⁺ ions. Stereochemical effects are observed in the ratios [M_sH? H₂O]⁺/[M_sH? NH₃]⁺. These effects are significant among metastable ions. In particular, only the [M_sH]⁺ ions produced from trans-diol isomers lose a water molecule. The favoured loss of water can be accounted for by an S_N2 mechanism in which the insertion of NH₃ gives [M_sH]⁺ with Walden inversion occurring during the ion-molecule reaction between [M + NH₄]⁺ + NH₃. The S_N1 and S_Ni pathways have been rejected.     

Monitoring chlorophenols in industrial effluents by solid-phase microextraction–gas chromatography–mass spectrometry

A method for the determination of 19 chlorophenols in industrial effluents samples using solid-phase microextraction (SPME) coupled to gas chromatography–mass spectrometry has been developed. Four kinds of different SPME fibres have been studied. Among them, the polyacrylate and carbowax®-divinylbenzene fibres were the most adequate. The extraction process was optimized by means of the experimental design, which allows the study of a large number of factors with a reasonable number of experiments. The optimized method allows the determination of the studied chlorophenols in complex matrices with a high organic content with detection limits down to 0.07?ng?mL^?1 and RSD ranging from 4.4% to 13.8%. The recovery studies with spiked real effluent samples at low levels of chlorophenols ranged from 59.8% to 142.1% for the lowest level (0.5?ng?mL^?1) and from 79.6% to 115.8% for the highest spiked level (2?ng?mL^?1). These results show the suitability of the proposed method to monitor chlorophenols in complex samples. 2,4,5-TCP was detected at concentrations close to its limits of detection in effluents coming from an oil refinery.