CuI‐catalyzed homocoupling of terminal alkynes to 1,3‐diynes

A simple and efficient protocol for CuI‐catalyzed oxidative homocoupling reaction of terminal alkynes to symmetrical 1,4‐disubstituted 1,3‐diynes was reported. The reaction can be carried out in the open air, using NaOAc as a base in the absence of any other additives. A variety of terminal alkynes were converted to the corresponding 1.3‐diynes in good to excellent yields without any side product formation. Copyright © 2010 John Wiley & Sons, Ltd.     

First report of a nano‐Cu2O‐catalyzed protocol for homo‐coupling reaction of terminal alkynes in water/ionic liquid medium

A new, efficient and green protocol for the nano‐Cu₂O‐catalyzed homo‐coupling reaction of terminal alkynes has been developed, using water/ionic liquid as an environmentally friendly solvent. Moreover, the system also allows the synthesis of unsymmetric 1,3‐diynes by cross‐coupling of two different terminal alkynes. It is noteworthy that the nano‐Cu₂O‐catalyzed methodology is a good supplement to copper catalyst for the Glaser‐type homo‐coupling reaction. Copyright © 2016 John Wiley & Sons, Ltd.     

Retracted: A Facile Synthetic Route to New Fluorinated Building‐Blocks of 1‐Fluoroalkynes and 1‐Fluorodiynes

A facile and direct fluorination process of alkynes and diynes was developed. In the presence of n‐butyllithium, the reaction of a series of terminal alkynes and diynes with the electrophilic fluorinating reagent (NFSI) proceeded to afford various 1‐fluoroalkynes and 1‐fluoro‐1,3‐diynes in moderate to high yields.     

Magnetic copper ferrite catalyzed homo‐ and cross‐coupling reaction of terminal alkynes under ambient atmosphere

The application of non‐toxic and magnetically separable nano‐CuFe₂O₄ as an efficient catalyst for oxidative homo‐ and cross‐coupling reaction of terminal alkynes is described. A wide range of symmetrical and unsymmetrical 1,3‐diynes have been synthesized in moderate to good yields under ambient atmosphere. The nano CuFe₂O₄ can be recovered with a magnet and reused at least five consecutive cycles with no appreciable loss of its catalytic activity.     

3‐(Diphenylphosphino)propanoic acid: an efficient ligand for the Pd/Cu‐catalyzed homo‐coupling of terminal alkynes in the presence of oxygen at room temperature

A simple, yet efficient system for PdCl₂/CuI to catalyze the homo‐coupling reactions of various terminal alkynes has been developed using 3‐(diphenylphosphino)propanoic acid as ligand in the presence of oxygen. The alkynes, including aromatic, heteroaromatic and aliphatic alkynes, were transformed at room temperature into the corresponding 1,3‐diynes in moderate to excellent yields. The turnover number was up to 1.04 × 10³. Copyright © 2015 John Wiley & Sons, Ltd.     

Synthesis of Unsymmetrical 1,3‐Diynes via Pd/Cu‐Catalyzed Cross‐Coupling of Terminal Alkynes at Room Temperature

A facile and practical synthetic route of unsymmetrical 1,3‐diynes via the PdCl/CuI catalyzed oxidative coupling of two different terminal alkynes has been developed by using 3‐(diphenylphosphino)propanoic acid as a ligand in the presence of oxygen. This system is suitable for not only aromatic alkynes but also heteroaromatic and aliphatic alkynes which were transformed into the corresponding unsymmetrical 1,3‐diynes in moderate to good yields at room temperature. Moreover, the unsymmetrical 1,3‐diynes were also obtained on a multi‐gram scale. Mechanistic studies suggest that oxygen plays a key role in the catalytic cycles.     

A reusable CuSO4 · 5H2O/cationic 2,2′‐bipyridyl system catalyzed homocoupling of terminal alkynes in water

A reusable CuSO₄ · 5H₂O/cationic 2,2′‐bipyridyl system catalyzed the homocoupling reaction of terminal alkynes in water using I₂ as the additive in the presence or absence of tetrabutylammonium bromide, giving the 1,3‐diynes in good to high yields. After reaction, the residual aqueous solution could be reused several times. Copyright © 2011 John Wiley & Sons, Ltd.     

Copper(II) Acetylacetonate: An Efficient Catalyst for Huisgen‐Click Reaction for Synthesis of 1,2,3‐Triazoles in Water

An efficient and green copper(II ) acetylacetonate‐catalyzed protocol for the Huisgen‐click reaction in water at 100 °C has been established. The protocol was not only suitable for the reaction between organic azides and alkynes, but also suitable for one‐pot three‐component reaction among alkyl halides, NaN₃ and alkynes.     

Efficient palladium-catalyzed homocoupling reaction and Sonogashira cross-coupling reaction of terminal alkynes under aerobic conditions

An efficient method for palladium-catalyzed homocoupling reaction of terminal alkynes in the synthesis of symmetric diynes is presented. The results showed that both Pd(OAc)(2) and CuI played crucial roles in the reaction. In the presence of 2 mol % Pd(OAc)(2), 2 mol % CuI, 3 equiv of Dabco, and air, homocoupling of various terminal alkynes afforded the corresponding symmetrical diynes in moderate to excellent yields, whereas low yields were obtained without either Pd(OAc)(2) or CuI. Moreover, high TONs (turnover numbers; up to 940 000 for the reaction of phenylacetylene) for the homocoupling reaction were observed. Under similar reaction conditions, cross-coupling of 1-iodo-4-nitrobenzene with phenylacetylene was also carried out smoothly in quantitative yield. However, the presence of CuI disfavored the palladium-catalyzed Sonogashira cross-coupling reactions of the less active aryl iodides and bromides. In the presence of 0.01-2 mol % Pd(OAc)(2), a number of aryl iodides and bromides were coupled with terminal alkynes in good to excellent yields. It is noteworthy that this protocol employs mild, efficient, aerobic, copper-free, and ligand-free conditions.     

Multicomponent Reactions of Pyridines To Give Ring‐Fused Pyridiniums: In Situ Activation Strategy Using 1,2‐Dichloroethane as a Vinyl Equivalent

Reported herein is a rhodium(III)‐catalyzed three‐component annulation reaction of simple pyridines, alkynes, and 1,2‐dichloroethane (DCE), affording a streamlined pathway to diverse ring‐fused pyridiniums. DCE not only serves as a vinyl equivalent but also as an in situ activating agent for pyridine C2?H activation. A cationic five‐membered rhodacycle complex has been isolated and proposed as a possible intermediate. This strategy can be extended to other N‐containing heteroarenes for the synthesis of multiring‐fused pyridiniums. These multicomponent reactions exhibit excellent regioselectivity for 1,3‐diynes, paving a path to the cascade cyclization of 3‐fluoropyridine or N‐methylpyridin‐3‐amine with 1,3‐diynes for the construction of brand‐new tricyclic‐fused pyrano‐ or hydropyridoquinolizinium salts. These ionic fluorophores have been investigated as potential biomarkers.     

Silver‐catalyzed Glaser coupling of alkynes

Excellent yields were obtained from the silver nitrate‐catalyzed homocoupling reaction of alkynes in N,N‐dimethylformamide using triphenylphosphine as ligand. This safe and simple silver catalytic system has been employed in a safe and efficient protocol for the synthesis of various 1,3‐diyne products from the corresponding aromatic or aliphatic alkynes with good air stability and absence of side products. Copyright © 2015 John Wiley & Sons, Ltd.     

Copper‐catalyzed Synthesis of N‐alkylated 2‐(4‐substituted‐1H‐1,2,3‐triazol‐1‐yl)‐1H‐indole‐3‐carbaldehyde by Step‐wise and One‐pot Three‐component Huisgen's 1,3‐dipolar Cycloaddition Reaction

An efficient method for the synthesis of N‐alkylated 2‐(4‐substituted‐1H‐1,2,3‐triazol‐1‐yl)‐1H‐indole‐3‐carbaldehyde has been developed starting from oxindole and indole using Huisgen's 1,3‐dipolar cycloaddition reaction of organic azides to alkynes. The effect of catalysts and solvent on these reactions has been investigated. Among all these conditions, while using CuSO₄·5H₂O, DMF was found to be the best system for this reaction. It could also be prepared in a one‐pot three‐component manner by treating equimolar quantities of halides, azides, and alkynes. The Huisgen's 1,3‐dipolar cycloaddition reaction was performed using CuSO₄·5H₂O in DMF with easy work‐up procedure.     

Experimental Evidence for the Involvement of Dinuclear Alkynylcopper(I) Complexes in Alkyne–Azide Chemistry

Dinuclear alkynylcopper(I) ladderane complexes are prepared by a robust and simple protocol involving the reduction of Cu₂(OH)₃OAc or Cu(OAc)₂ by easily oxidised alcohols in the presence of terminal alkynes; they function as efficient catalysts in copper‐catalysed alkyne–azide cycloaddition reactions as predicted by the Ahlquist–Fokin calculations. The same copper(I) catalysts are formed during reactions by using the Sharpless–Fokin protocol. The experimental results also provide evidence that sodium ascorbate functions as a base to deprotonate terminal alkynes and additionally give a convincing alternative explanation for the fact that the Cu^I‐catalysed reactions of certain 1,3‐diazides with phenylacetylene give bis(triazoles) as the major products. The same dinuclear alkynylcopper(I) complexes also function as catalysts in cycloaddition reactions of azides with 1‐iodoalkynes.     

An alternative CuCl–piperidine‐catalyzed oxidative homocoupling of terminal alkynes affording 1,3‐diynes in air

CuCl with the use of a catalytic amount of piperidine as additive shows high catalytic activity for the oxidative homocoupling reactions of terminal alkynes in toluene at 60 °C in air to afford 1,3‐diynes in high yields. Copyright © 2009 John Wiley & Sons, Ltd.     

Efficient P,O chelate palladium(II)/AgNO3 cocatalyzed homocoupling of aromatic terminal alkynes in aqueous media under ambient atmosphere

A new and efficient protocol for the P, O chelate Pd(II)/AgNO₃ cocatalyzed oxidative homocoupling reaction of aromatic terminal alkynes in the synthesis of symmetrical 1,4-disubstituted-1,3-diynes was described in aqueous media under ambient atmosphere. The results showed that both NEt₃ and THF/H₂O (in 4:1 proportion) played crucial roles in the reaction. In contrast, this protocol employs a low palladium(II) complex loading and AgNO₃ as cocatalyst to obtain the homocoupled products in moderate to good yields.     

Brønsted Acid‐Catalyzed Three‐Component 1,3‐Dipolar Cycloadditions of 1,2‐Disubstituted Alkynes with Aldehyde‐Generated Azomethine Ylides

The first 1,3‐dipolar cycloadditions (1,3‐DCs) of 1,2‐disubstituted alkynes with aldehyde‐generated azomethine ylides have been established, leading to the efficient synthesis of poly‐substituted 2,5‐dihydropyrroles.The Brønsted acid‐catalyzed three‐component 1,3‐DCs of but‐2‐ynedioates, aldehydes, and diethyl 2‐aminomalonate tolerate a wide range of substrates, offering structurally diverse poly‐substituted 2,5‐dihydropyrroles in high yields. This protocol not only provides an easy and efficient approach to poly‐substituted 2,5‐dihydropyrroles but also greatly enriches the chemistry of 1,3‐DCs, especially alkyne‐involved 1,3‐DCs.     

Copper‐Catalyzed Aerobic Oxidative Transformation of Ketone‐Derived N‐Tosyl Hydrazones: An Entry to Alkynes

A novel strategy involving Cu‐catalyzed oxidative transformation of ketone‐derived hydrazone moiety to various synthetic valuable internal alkynes and diynes has been developed. This method features inexpensive metal catalyst, green oxidant, good functional group tolerance, high regioselectivity and readily available starting materials. Oxidative deprotonation reactions were carried out to form internal alkynes and symmetrical diynes. Cross‐coupling reactions of hydrazones with halides and terminal alkynes were performed to afford functionalized alkynes and unsymmetrical conjugated diynes. A mechanism proceeding through a Cu‐carbene intermediate is proposed for the C? C triple bond formation.     

Copper-catalyzed decarboxylative cross-coupling of propiolic acids and terminal alkynes

A copper-catalyzed decarboxylative cross-coupling reaction of propiolic acids with terminal alkynes is developed leading to unsymmetric 1,3-conjugated diynes under mild conditions. This method provides a novel decarboxylative cross-coupling for sp-sp bond formation. Compared to organic halides, only carbon dioxide is produced as by-products in this approach.     

Catalytic Enantioselective Conjugate Alkynylation of α,β‐Unsaturated 1,1,1‐Trifluoromethyl Ketones with Terminal Alkynes

The first catalytic enantioselective conjugate alkynylation of α,β‐unsaturated 1,1,1‐trifluoromethyl ketones has been carried out. Terminal alkynes and 1,3‐diynes were treated with trifluoromethyl ketones in the presence of a low catalytic load of a Cu^I‐MeOBIPHEP complex (2.5 mol %) and triethylamine (10 mol %) to give the corresponding trifluoromethyl ketones bearing a propargylic stereogenic center at the β position with good yields and excellent enantiomeric excesses in most of the cases. No 1,2‐addition products were formed under the reaction conditions. The procedure showed broad substrate scope for alkyne, diyne, and enone. A rationale for the observed stereochemistry has been provided. Finally, the potential application of the reaction products in the synthesis of chiral tetrahydrofurans bearing a trifluoromethylated quaternary stereocenter has been devised.     

Ruthenium‐Catalyzed Transfer‐Hydrogenative Cyclization of 1,6‐Diynes with Hantzsch 1,4‐Dihydropyridine as a H2 Surrogate

The transfer‐hydrogenative cyclization of 1,6‐diynes with Hantzsch 1,4‐dihydropyridine as a H₂ surrogate was performed in the presence of a cationic ruthenium catalyst of the type [Cp′Ru(MeCN)₃PF₆]. Exocyclic 1,3‐dienes or their 1,4‐hydrogenation products, cycloalkenes, were selectively obtained, depending on the substrate structure and the reaction conditions.